Lightroom 5 running on win 7 pro 64bit

All of a sudden I can export from lightroom but when I try to import files a windows error appears telling me lightroom 64bit has stopped working and it shuts down, any Ideas?

Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
Hope it helps.
Regards,
Waseem,
I work for HP.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Similar Messages

Win 7 Pro 64bit - BIOS Update Failure 2ACN37WW

G'day Genlemen,
I am upgrading to 2g RAM and need to update my BIOS. However I am not able to get the program to run from Windows 7 Pro 64bit. I am trying to install 2ACN37WW.exe
When I open the program as administator it pops up for a second and disappears, I've tried running it in compatibility mode which doesn't help.
Do I need to be using a 32bit OS for the 2ACN37WW.exe to run in Windows? I have followed the txt instructions exactly.
Is there another way I can update to 2ACN37WW outside of Windows? Like the Thinkpad T serious CD BIOS update method?
IdeaPad S10-3 (064757M)
S/N:xxxxxxxxxx
Thanks,
Smack
Edit by Mod Dont show your Serial in public to prevend your privacy

Hi and welcome,
there are a few methods you can use.. via bootable usb memory stick or card &
http://www.nu2.nu/pebuilder/
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

MAR WIN 7 PRO 64bit on Refurb T520

I have ordered a T520 refurb. It apparently has MAR WIN 7 PRO 64bit installed on a 250GB 7200 HD. No discs, so presumably there will be a recovery partition.
Question 1: Will I be able to burn a recovery CD from the recovery partition?
Question 2. I would like to install an SSD as the main drive. Can I clone the entire HD including recovery partition and keep it as a back up? Maybe install in Ultrabay and partition it so I can use it in part for data.
Question 3. If I needed to download and install a Win7 Pro 64 bit ISO, will it work using the MAR license?
Question 4. I think I read something about loss of functionality of Thinkvantage when using MAR Windows because Flextronics/IBM are not fully licensed to offer some features. Is this true? I may have misunderstood.
Any other pitfalls of MAR I should know about?

"All the Lenovo software will not be included, and probably the drivers they have on file for the system. That would be because the company does not have a contract with Lenovo (I am guessing here) but as far as I know that does not stop you from getting it. BUT you will not get the other software that is loaded on Lenovo's at the factory. That may be what they are talking about. But Windows is windows. Say for instance you have Windows 7 Premium Home, it will be the same as if Lenovo installed it, or you installed it yourself.
One issue you may have. Recovery discs. Are you getting any Discs with the computer, or does it have a recovery partition. You have to get one or the other at the cost of the remanufacturer"
I am finding that there are differences with the IBM/Flextronics refurb machine. They say in a FAQ that because they are not legally allowed to use the Lenovo operating software, the Thinkvantage button is deactivated. If I hit downarrow (or is it F12), and get to the boot choice screen, there is an option at the bottom for recovery. This uses the recovery partition and will apparently over write the windows installation, losing set up etc.
What I was looking for, was a method to backup the recovery partition to DVD or USB stick just in case drive itself fails. But I don't see a way to do that other than cloning the entire disk. Is there another way?

Lorsque j'installe itunes itunes64setup.exe, ne démarre pas win 7 pro 64bit. message pas d'accès au dossier, pourtant je suis administrateur.

lorsque j'installe itunes itunes64setup.exe, ne démarre pas win 7 pro 64bit. message pas d'accès au dossier, pourtant je suis administrateur.
Message exacte: ''soit le dossier itunes est sur un disque verrouillé, soit vous ne disposez pas de l'autorisation d'écriture pour ce dossier. Pourtant, j'ai tous ces accès. impossible de démarrer Itunes. quelqu'un peut m'aider?

when I install itunes itunes64setup.exe does not start win 7 pro 64bit. Message not access the file, but I am an administrator.
Exact message:'' is the itunes folder is on a locked disk or you do not have write permission for this folder. But I have all these access. unable to start Itunes. Can someone help me?
Try the shift-start-iTunes method to make sure iTunes is trying to open the correct library file. This is normally <User's Music>\iTunes\iTunes Library.itl
iTunes: How to open an alternate iTunes Library file or create a new one
Essayez la méthode shift-démarrage iTunes pour s'assurer iTunes essaie d'ouvrir le fichier de bibliothèque correct. C'est normalement <User's Music>\iTunes\iTunes Library.itl
iTunes : ouverture ou création d’une autre bibliothèque iTunes
tt2

Lightroom 5.6 on Win 7 Pro 64 bit SP1 tying up CPUs, running very slowly

Hi,
I have Lightroom 5.6. Whenever I use the Spot removal, Graduated filter, Radial filter or Adjustment brush tools in the develop module, it ties up the 6 CPU cores (as viewed in Task Manager) so everything goes very slowly. For example, the effect of a stroke with the Adjustment brush only appears on screen after 5 seconds or more. Sometimes it gets so bad that I have to kill the process and restart Lightroom. It affects other programs running at the same time, as they can't get enough CPU. It is basically unusable. An edit that should take five minutes can take an hour.
The problem happens when I either
In the Library module I select an image that I have previously used the tools mentioned above on
or
In the Develop module when I use those tools.
It is not just an issue with Lr 5.6 - previous versions also did this on my system.
My workflow is:
Browse the library module, adding images to a collection (Canon EOS 7D raw)
For each image in the collection I:
Select the image
Create a virtual copy
Stack the original and copy together
Edit the copy
Export AdobeRGB 16 bit PSD to Photoshop for sharpening and conversion to CMYK
Place the image into my InDesign document
I occasionally use Perfect Photo Suite 8.x on my images from within Lightroom.
I have been a software developer for over 30 years, so I'm not doing anything stupid. Lightroom is just spinning the CPU cores to no effect, like it has a thread or threads in an infinite loop.
I typically have Lightroom, Photoshop (CC or CS6) and InDesign CS6 running at the same time. All three together occupy just over half of the available RAM.
I have a prettty fast machine (see the specs below) and other software does not tie it up like this (except rendering video in Pr or Ae, which I expect).
I have tried googling for an answer, with no success.
I feel this is an issue that Adobe ought to provide technical assistance for, given the technical nature and severity of the problem.
Please help.
Machine details:
Windows 7 Professional 64 bit, Service pack 1, all updates applied
Processor AMD Phenom(tm) II X6 1055T Processor
Memory (RAM) 16.0 GB
Graphics NVIDIA GeForce GTX 780 3GB
Primary hard disk 71GB Free (209GB Total)
Disk Storage Total: 5.9 TB

Thank you curve8530curve8330 for stepping up and helping me out ...
I think I'll try re-installing the BB Desktop Software 7.1.0.41 ... the ' ... no BB Device Software installed ... ' GUI message has me concerned that there has been a Registry disconnect somehow involving the USB driver software registered with BB D. S. 7 ... this would indeed be a Windows 7 problem ... I'll update the thread and give you credit for pointing me in this direction ... if it works.
However, to be clear, I am connecting my 9630 using a USB interface cable connected to a USB 2.0 port on the Win 7 system ... I am not removing the 8GB MicroSDHC card from the phone and then utilizing a MicroSD to SD adapter or SD port ... whatsoever.
And , as for connecting via another computer, now that I have thought about this some more, that may have been what precipitated the problem in the first place ... I had experimentally tried re-connecting the 9630 to an XP Pro SP3 32-bit notebook loaded with BB D. M. 5.0.1.28 ... (after never having done so again since the Win 7 Pro SP1 64-bit / BB D. S. 7.1.0.41 system came into use). I don't see, off-hand, how that could have caused this issue, however, the coincidence is too large to ignore.
FFF

Adobe reader XI 11.0.05,running in Win 7 Pro 64-bit

I have the black X upper left corner. When access a web sit , for example WWW.SSA.GOV and click in forms , then open a pdf link , a blank screen shows with a black x only. I tried many options to fix this problem but not success. If I try to open the same document in google chrome it opens perfect. So my problem is with IE, so Ireset the IE and no fix. I downgrade to IE10 , no fix. I downgrade to IE8 and installed Adobe reader 9.5 and the web document open perfect. I don't want to leave this computer with IE8 and AR 9.5 ,I want to work IE11 with AR XI 11.0.05 . Please some suggestions? Just as information I tried disabling ActiveX filtering but no fix. Please I need help. Thank you

Thank you Pat Willener. This Microsoft solution really worked for IE11 (I did manually). Now I have Win 7 Pro 64-bit with IE11 and AR 11.0.5 running perfect. Thanks again to you and I am glad that I joined this forum.

Problems w/ver 27 and xp sp3; should I give up on xp and go to Win 7 PRO 64bit where I find no problems?

OS = Win XP SP3
Cannot change/edit location of downloads; the only download available is DOWNLOADS
This ver of MF takes about 15 seconds to load NASCAR website
After I select any website to load a small, rotating circle appears in the upper-left of the screen and remains until, finally, the page has completely loaded.
I do not have this problem w/win 7 pro 64 bit
Installing MF 4 solves this problem on the Win XP SP3 OS.
I do not find this problem on older laptops running the same XP OS.

Have you done any routine maintenance on that computer recently?
What happens if you use a different browser on that computer?
Are you running the most up-to-date version of Firefox on that computer?
What do you mean by MF4?

Upgrade from Win 7 Pro 32bit pre embeded OEM pack to Win 7 Pro 64bit

Hello,
I have recently purchased 15 Dell OptiPlex Desktops with pre installed Windows 7 Pro 32bit Operating System.
Now, i wish to upgrade it to Windows 7 Pro 64bit but not able to do so as i do not have the product key. As I understand the key for 32bit & 64bit is same but the problem is that I cannot locate my current pre embedded OEM license key as it is been embedded
in to the motherboard as informed to me by OEM (Dell).
Please suggest a solution as on how can I upgrade my current 32bit OS to 64bit in this scenario.
Awaiting your response in anticipation.

This for is for Windows Embedded POSReady. A better place to post your question is on he Windows forum site:
http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Who Knows the best way to deploy video Using FMS / Apache / IIS Server running on Win XP Pro?

Right now I do not have “server”. Example: I do not have anything like windows sever 2000, 2003 etc. but I have and running IIS server on the same Windows XP Pro. On this very same machine I installed FMS server with the Apache that came with the FMS. I have read and followed the instructions time and time again in deferent ways to deploy my video on the server but no idea I used is working so my clients could view my videos. Looking forward to have site like “hulu” / "You Tube".
Pleaseif you was successful streaming videos, I need step by step information from anyone whom was able to streaming videos to the public on the internet with Flash / Apache / IIS Server running on Windows XP Pro.
jos.

Hello World,
This issue has been taken care of! Thanks to all that read my message and wish they could help. It was all but a simple mistake that created the problem. For all that may think they themselves has the same problem please check your spellings at times that could be a serious issue! It was all because I missed an alphabet of “s” the word was “Thumbs” but I spelled it “Thumb” missing “s” for this simple reason the Thumbnails refuse to populate in the Tilelist. But soon this was corrected, both images populated in the tilelist. For the videos I have to make correction in ActionScript from playlist-streaming to playlist and the video was on. Now you know you too could try looking into your designs and ideas!
Thanks.
Jos.

Trying to connect the RD app to remotely control a laptop running Win 7 Pro 64bit

Can you please advice which changes I need to do on the Win 7 laptop to be able to connect to it from the RD client app? thanks!

Hi,
If the device you runs the RD App and your Windows 7 laptop are in the same network, you can just refer to the steps in this article to configure your Windows 7.
Allow someone to connect to your computer using Remote Desktop Connection
http://windows.microsoft.com/en-us/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
However, if they are not in the same network, you may also need to configure your network device.
Allow Remote Desktop connections from outside your home network
http://windows.microsoft.com/en-us/windows7/allow-remote-desktop-connections-from-outside-your-home-network
Hope this helps.
Jeremy Wu
TechNet Community Support

I can not get Safari to work with my Alienware MX18 running Win 7 Pro 64Bit

Any suggestions on how to correct the problem?

Could you walk us through the problems you're having with running Safari, please?
(If you get an error message, let us know what it says. Precise text, please.)

Error installing cc on mac running parallels win 7 pro

new mac arrived today
installed parallels
installed windows 7 pro
paid for lightroom and photoshop on a monthly basis
tried to install creative cloud
failed and failed and failed and failed......
error 1001.
spoke to adobe support in timbuktu, absolutely useless.
anyone got any pointers on this?
if not, going for a refund.
thanks guys.

My understanding is that CC, unlike previous versions (CS6 and before) is not platform specific. So (silly question) why try to run CC in Parallels/Windows instead of natively on the Mac OS?
--OB

Thinkpad T400, Win 7 Pro 64bit and sleep

I have a ThinkPad T400 laptop that is running Windows 7 Professional 64bit with SP1. I use a docking station with it as well. When I go home at night, I put the computer to sleep, undock it and take it home with me. On most nights, I don't do anything else with it. When I come in in the morning, I put it in the dock and start it up. However, when I do this, it takes about 5 minutes for the logon screen to appear and another minute or two before I can actually do anything. I've tried different docks with the same result. It isn't hibernating either. Any ideas what may be causing this? I thought Windows 7 was supposed to be fast to resume?

I tend to agree with the suggestion that it's waking from sleep and hibernating. It is at least a strong possibility.
Does it say "resuming windows"?
OTOH, 5 minutes plus is way too long for a normal resume from hibernation. I just tested my T400/Win7 Pro 64. It takes 30 seconds from power on (resuming from hibernation) to the desktop. I don't require a login on resume.
I don't have SP1 installed. The graphics driver prevents that for now.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Snipping Tool stopping working after installing Office 2013 Pro (32 bit) on Win 7 Pro 64bit - help?

Have been looking at many forums to fix this:
ran SFC - no errors
rebooted multiple times
all Windows Updates are current
don't want to disable antivirus, as some have suggested
Uploaded a registry fix, which several have suggested - no soap
Note:
all other features of this PC work great - zero issues.
the issue starting right after installing Office 2013 Pro - 32bit. It runs fine.
"Paint" runs fine. "Print Screen" works fine - image goes to clipboard, and I can paste anywhere.
get the standard message everyone posts in forums:
"The Snipping Tool is not working on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator."
Have tried other free third-party tools, and they are cumbersome, and I love the MS Snipping Tool.
Advice? Tips?
Thanks,
Dave
DavidLum

Hi,
Import this key back into the registry, log off and back on to check if it works.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\AppID\{7F429620-16D1-471E-A81A-114992148034}]
@="wisptis"
"RunAs"="Interactive User"
"LaunchPermission"=hex:01,00,14,80,64,00,00,00,74,00,00,00,14,00,00,00,30,00,\
00,00,02,00,1c,00,01,00,00,00,11,00,14,00,04,00,00,00,01,01,00,00,00,00,00,\
10,00,10,00,00,02,00,34,00,02,00,00,00,00,00,18,00,1f,00,00,00,01,02,00,00,\
00,00,00,05,20,00,00,00,20,02,00,00,00,00,14,00,0b,00,00,00,01,01,00,00,00,\
00,00,01,00,00,00,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,\
00,00,00,00,00,05,20,00,00,00,20,02,00,00
If problem persists, please refer to another thread discussion with this problem.
http://social.technet.microsoft.com/Forums/windows/en-US/610ecb85-9aea-472c-8590-b835a0982f68/snipping-tool-fails?forum=itprovistaapps
Roger Lu
TechNet Community Support

Multiple Java Applets hangs when run on Win 2000 Pro SP4

I have a Java Applets which is used to connect to a remote element using server socket connections.
When I launch mulitple applets to connect to different elements on Win XP with SP2 OS using IE6 SP2 it works fine.
However ,the same I do in Win2K Pro SP4 with IE6 SP1 it doesn't work. In this case all the applets hung.
Does Java applet has platform specific problem? Any pointers regarding this problem highly appreciated.
TIA,...Sachin

Does anyone know if there is any bug creating socket connection from Windows 2000 pc with Service Pack 4?
Thanks in advance.
Biju

Lightroom 5 running on win 7 pro 64bit

Similar Messages

Maybe you are looking for