Lightroom 5 Tethering and Mouse Problem

Hi,
I was using LR 5.3 on my MBP running OS X 10.9.2, shooting tethered with the USB cable supplied by Nikon. Laptop was plugged in to power supply. Used Nikon d7100 and went through the troubleshooting guide on shooting tethered with LR. After a few shots, the mouse cursor and keyboard would stop responding (I powered off camera too) and the only thing I could do was reboot the laptop. I had an external mouse plugged in after the first few crashes but then the problem would occur again. Has anyone else experienced this? I noticed these in the system.log around the time of the crash and only happened during tethering.
Mar 27 08:19:41 icky-boos-macbook-pro kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=432[AdobeCrashDaemon] final status 0x0, allowing (remove VALID) page
Mar 27 08:21:25 icky-boos-macbook-pro kernel[0]: considerRebuildOfPrelinkedKernel prebuild rebuild has expired
Mar 27 08:21:28 icky-boos-macbook-pro kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
Mar 27 08:21:29 icky-boos-macbook-pro kernel[0]: AppleUSBMultitouchDriver: Touch failed to initialize after 757 ms
Mar 27 08:21:34 icky-boos-macbook-pro kernel[0]: USBF: 562.850 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 3, EP: 0)
Mar 27 08:21:34 icky-boos-macbook-pro kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe0004051 - retrying
Mar 27 08:21:34 icky-boos-macbook-pro kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe000404f - retrying
Mar 27 08:21:34 icky-boos-macbook-pro kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest returned error 0xe000404f (interface 1, reportID 0xac, payload 2
Mar 27 08:21:34 icky-boos-macbook-pro kernel[0]: AppleUSBMultitouchDebug: _deviceSetReport returned an error in configureDataMode

Thanks for the reply. I did find the problem, it was user error. The thumbnail slider was set all the way to the right and hidden from view. Bringing it slider back into view and then using to reduce the thumbnail size solved the problem.

Similar Messages

Bluetooth keyboard and mouse problems

Dear friends,
I think something is wrong with my bluetooth devices... They work perfecly well for a period of time (maybe 1 hour, maybe 2 minutes) and after this period they stop working well. They are not disconnected, they keep working, but they are super lagish, e.g. the mouse cannot be controlled, the keyboard have super latency or it keeps repeating a button i selected.
When this occurs I turn off bluetooth from my status bar, and turn it again on right away. That solves the problem for again a period of time. This issue was first introduced to me after I installed Lion on my mac. After this and some other problems I experienced in Lion, I decided to switch back to snow leopard again. The thing is that the problem persisted...
Any suggestions ???
Thanks

OK. New input...
Updated again to Lion. As soon as I updated the problem began again. Once again I deleted the com.apple.bluetooth file and reset both pram and smc.
For two days my bluetooth devices were working perfectly fine. None issues.
Today, I was in a hurry and put my mac on sleep by closing the lid. As soon as I opened the lid again
the problem unveiled again.
What on earth is happening ?? It cannot be a keyboard or mouse problem, can it ??
Little help, please... It seems managable, but performing a smc and pram reset every couple days doen't
seem right...
Regards

Dragging, high-lighting and mouse problems

I am experiencing sudden problems with dragging icons and folders, scrolling within browsers and top menus (keep the mouse held down to navigate across menus and the selections disappear within a few seconds, simply click and move the mouse and they stay etc ..), high-lighting only required text is almost impossible because a single click on one word high-lights a whole paragraph. I've restarted using the instillation disc, run Disk Utility and chosen to repaired the hard drive. What came up was alarming:
1. There were invalid leaf record counts - 58 instead of 649
2. Volume bit map minor repairs made
3. Invalid volume free block counts - 6997411 instead of 6996956
4. Reserve fields in catalog record have incorrect data
and after the repair ..
1 HFS volume was repaired
and 1 volume was not repaired.
Clearly my hard drive's only partition isn't happy.
After this only repair I still have the same problem with dragging and minor mouse desktop commands (I've also cleaned the laser mouse but wonder if this might still be the problem? It otherwise seems fine) but am left wondering about this unrepaired volume. What might it's damage be and how can it be corrected? I have a pretty old version Disk Warrior (3.0.1) but remember reading that it shouldn't be used with the recent Tiger versions so is there another Volume repair app which would suit me and maybe rectify this annoying occurance? The only thing I've updated recently is my RAM, from 1 to 3GB.
Someone in another post suggested resetting PRAM but what would that achieve?
Any help is greatly received.
Rgds,
Richard

I had DW 3.0.1 on an original disk but looking through their site I realised this wouldn't boot nor repair the machine with 4.1.1 so it has a patch that you download to do just this, reboot and repair. Download the patch, enter your serial number for your disk and it blends them together and you burn a new CD which you can reboot from. I think the new version of DW is 4 so this free upgrade sees you through another step but this method does not work for Leopard.
I rebooted and went into graph, saw the nodes were all over the place and I optimized from there.
But what I think is the root of my problem was inserting Kingston RAM which for some reason my G5 doesn't like though they're the same spec as my previous.

Sound and Mouse Problem on Toshiba Satellite A505 S6005 - Related?

Hello-
I bought my A505 back at the end of April and have had these two annoying problems that I have been trying to solve for about three plus months now. The first started right out of the box as it were and it involves the sound "burping" at me periodically. It's a hard sound to describe. It's kind of like a digital croak or a stutter all rolled into one. It now likes to do this exactly at midnight every night, when the CPU usage will spike, but I can't find anything running at that time (I don't have any virus scans, defrags, etc. set for that time). High CPU usage normally doesn't cause this anyway - I'll be running how many programs and the sound will be fine.
My other problem is a recent one and that is that the mouse pointer will periodically just hang up for a few seconds every so often. It's not a battery problem (I use a wireless Logitech) seeing as I keep it well fed and I tried using a wired mouse and got the same hang up.
Are these two problems related? I've tried to find information on this but haven't found anything useful to me. I've tried turning down the fancy settings on my Windows, turning of my webcam and microphone, everything.
I would greatly appreciate any help, thanks!
My system info:
Model Name                      Satellite A505
Part Number                                 PSAT6U-005002
Serial Number                               2A017921Q
OS Version                                   Microsoft Windows 7 Home Premium    6.1.7600
BIOS Version                                1.20
CPU                               Intel(R) Core(TM) i3 CPU       M 330 @ 2.13GHz
Physical Memory              4096MB RAM
Hard Disk Capacity              487,361,343,488 [Byte]   453.891 [GB]
Hard Disk Free Space Capacity 389,158,993,920 [Byte]   362.433 [GB]
Video                                          Intel(R) Graphics Media Accelerator HD   version=8.15.10.1986
Screen Resolution                        1366 x 768 Pixels
Color Quality                               True Color (32 Bit)
Sound                           Realtek High Definition Audio   version=6.0.1.5972
                                                  Intel(R) Display Audio   version=6.12.0.3037

Satellite A505-S6005
..the sound "burping" at me periodically. ... It's kind of like a digital croak or a stutter all rolled into one. It now likes to do this exactly at midnight every night, when the CPU usage will spike, but I can't find anything running at that time..
Maybe when the PC Health Monitor runs?
   Document ID: 98082921
-Jerry

Safari 4.0.3 and Mouse Problems???

Since installing Safari4.0.3 over 4.0.2 a little while ago, none of my mice's right button double click (or triple click) functions work any more i.e. Can't open a folder using double click.
Right clicks or any other mouse settings do work but just not double click or triple click functions. I'm using USB Overdrive to configure mouse settings. I've never before had problems with USB Overdrive.
I know, it doesn't make sense but It seems more than just a coincidence.
I'd like to reinstall Safari 4.0.2 but can't locate a download or it. Can anyone point me to it? I'd have to uninstall 4.0.3 first, I guess, but how?

I just discovered that I can't launch any of my apps when clicking on their dock icons(using my mice) but I can do so using my MacBook Pro's trackpad button.
If I click twice on a folder or file using my mouse button or even my trackpad button it won't open. Never had this problem before.
All these issues only after installing Safari 4.0.3.
Message was edited by: AnonyMouse

G580 Very slow, and mouse problems, please help

I purchased a brand new G580 approx 2 weeks ago.
It has 4GB of memory compared to my old lenovo which had 2GB. This new one runs at half the speed of my old one and has nothing on it (i.e pictures, music, vids etc)
If i open a programme to do something and then open another, it cannot cope with it and will take forever to do anything on the 2nd programme when it eventually opens.
also the mouse wanders! I dont have to be touching it or doing anything near it, it just wanders across the screen which is getting very annoying.
Please could somebody help me?

Hi kiri_tc,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your G580 Laptop is not performing as expected and the cursor is moving erratic, re-installing the Touchpad driver should resolve this issue and let me know the OS (Operating System) that is installed in the computer and the country where the computer was purchased, also the Type of G580 for providing the steps to resolve performance issue and exact touchpad driver link. Below is the link to locate the model number and Type of the computer which is mentioned on the sticker at the base of the Laptop.
How to find the Serial Number (S/N) and Type of your computer
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Desktop and mouse problems

Whenever I move around the desktop with the trackpad, it starts opening up rectangular boxes and highlighting icons inside the box. Also, when I move around web pages, things get highlighted without my intending to highlight them. What is ?

The problem continues in the new administrator account. When I first go to the desktop, I can move the cursor with the trackpad in a normal way but once I click on the desktop the cursor becomes very sticky and draws boxes, highlights icons, and drags icons. Also, I can't pull down the toolbar list of "old favorite" sites.

Keyboard and mouse problems

Within the past week I have had a lot of trouble with my powerbook. About 6 months ago I put tiger on it. Now when I use my computer it seems like it freezes up. Only certain keys work and the mouse will no open anything except for the drop down menus. Any ideas.

Turn your laptop off and then turn it back on.

Mac mini, bluetooth keyboard and mouse problems

My elderly father is trying to use bluetooth (USB adaptor) with his mini, and Apple bluetooth keyboard and bluetooth mouse. He has the mini about 6 feet away in the entertainment center partly behind the cabinet door. He keeps getting a message that his keyboard can't be found. I've had him wiggle the key board, check the batteries etc. to no avail. He bought this Mini 5 months ago to be able to get DSL, and so far he hasn't been able to get hooked up because his keyboard never works enough.
I live 400 miles away, so can't go over easily to help out. He doesn't want a keyboard with a cable, because he wants to sit in front of the TV, which he is using as a monitor.
Any suggestions? The mouse works more reliably, by the way.
I don't know what brand USB adaptor he is using, he got it from Fry's, but the Apple store says they recommend only certain brands.
thanks,
Lory

problem solved. Replaced key board, mousse and changed brands of USB bluetooth adaptor, which is now a D-Link brand I bought from an Apple store. Works like a champ.
Lory

Rectangle and Mouse problems

I'm trying to use a mouse to draw a rectangle that stays after I've drawn it. For some reason after I click, which initializes oldx and oldy, drag it, and release it, which initializes x and y, I have to click an extra time to draw the rectangle, then when I move the mouse the rectangle disappears. How do I get the program to draw the rectangle permanently and how do I get the rectangle to stay on the screen?
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
public class Squares extends Applet implements MouseListener
private int oldx,oldy,x,y;
public void init()
    addMouseListener(this);
    public void paint(Graphics g)
      g.setColor(Color.red);
      g.fillRect(oldx,oldy,x-oldx,y-oldy);
    public void mousePressed(MouseEvent e)
      oldx=e.getX();
      oldy=e.getY();
    public void mouseReleased(MouseEvent e)
      x=e.getX();
      y=e.getY();
      repaint();
    public void mouseClicked(MouseEvent e){}
    public void mouseEntered(MouseEvent e){}
    public void mouseExited(MouseEvent e){}
}

I'm trying to use a mouse to draw a rectangle that
stays after I've drawn it. For some reason after I
click, which initializes oldx and oldy, drag it, and
release it, which initializes x and y, I have to click
an extra time to draw the rectangle, then when I move
the mouse the rectangle disappears. How do I get the
program to draw the rectangle permanently and how do I
get the rectangle to stay on the screen?I'm not sure I got your question right. But I can draw the rectangle ok and move the mouse afterwards without the rectangle disappearing. The drawn rectangle only disappears if I click my mouse, which goes back into the init oldx and oldy stage.
In order to draw the rectangle permanently suggest you use a boolean varialbe to indicate its state. This boolean variable can be set after
g.fillRect(oldx,oldy,x-oldx,y-oldy); in your paint method
HTH

Internet connect and mouse problems

My computer keeps asking me if I want to stay connected to the internet every 10 minutes. Its really irritating and if I happen to have stepped away for a minute it will log me out if I'm not there to press yes. Is there a way to make it stay connected without asking?
Also my mouse keeps jumping around the screen when I'm trying to work. Is there a way to fix that?
Thanks!

taliafr,
First of all, Welcome to the  Discussion Forums!
Also my mouse keeps jumping around the screen when I'm trying to work. Is there a way to fix that?
It might help to know what mouse you are using? Apple wired/wireless mouse etc. or third party?
A couple of things to try are to make sure your mouse pad is of a solid color instead of a patterned mouse pad (you can test by using a solid color sheet of paper). Secondly, go to System Preferences and make sure under KeyBoard & Mouse>Mouse tab settings that the tracking is not set all the way to fast. Also, if a wired mouse, try plugging the mouse into a different usb port if you haven't tried that already.
hope that helps some,
littleshoulders

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

Problem with "Keybord and Mouse" on Preference Pane

I can't open "Keybord and Mouse" on Preference Pane.
When I click on it, it doesn't open, just keeps loading until I click any other option except "Keybord and Mouse". Otherwise it opens an empty preference pane window, displaying nothing but the gray background.
I can't access any keybord or mouse configuration. How do I fix it?

Hi, did anyone fix this problem yet?
My problem is that i copied the 10.5.2 HD from my old Macbook to my new MBP (with the new multitouch trackpad) to save time and to avoid a new install. Everything works except the mouse and keyboad preference pane. It seems that the demos for the swipe etc are non existent, and therefore the UI does not seem to work. This seems to make sense, as the Macbook did not have the options for multitouch. Does anyone know how to fix this? Is there any way I can reinstall the missing components to avoid a fresh install?
Thanks alot for help. You can save my time
Cheers, André

Problem with keyboard and mouse pm8m-v

I have gotten this pm8m-v from a freind who knew nothing about computers. He had problems with the keyboard and mouse not responding at start up or just freeze on him. So I check it out, called MSI and even sent it to them, they claimed that there was nothing wrong with the board. So here are the specs of the computer now:
pm8m-v motherboard
2-256MB memory PC-2700 DDR 333Mhz
intel P4 2.6GHz
codegen power supply 300W
gateway CDW
western digital 40 harddrive
the rest is on board stuff
the problem is still there and it is driving me crazy, can you please help?

I had the same problem with the PM8M-V, today as a matter of fact, and I kept getting locked up at the point where I had to hit enter to load the WinXP CD to setup the system. After finding this topic I tried a different keyboard. The one that was being used was a Kennsiington PS2 cheapo, I swapped it for a Microsoft (one of those ergonomic styles and I've had it for a long time) Keyboard PS2, and the problem went away. I'm typing on the Kennsington right now, so it's fine just wasn't liked by the PM8M-V for some reason.

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

Lightroom 5 Tethering and Mouse Problem

Similar Messages

Maybe you are looking for