Lightroom 5 updated to the latest version takes 10 seconds to export one picture...
hi,
Are there anyone out there has the same problem? And anyone has a solution?
Took more than 5 hours to export 2400 picture for a time lapse project ....very slow compare to previous version which takes just 20 minutes.
thanks
jl
Restore.
http://support.apple.com/kb/HT4367
Similar Messages
-
I've got an important file I need to access. I had no trouble on 9/20 and today I am told I need to download the latest version of Numbers, which I'd already done. I'm not having trouble with any other files. Help
Please see this user tip:
Need newer version of Numbers to open file -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
Please help, after uploading my IPad 2 with newest version iOS 8, my dictionary is not working.
RaineHi Rainefromlondon,
Thank you for thinking of Apple Support Communities for your support needs.
iOS: Dictionary isn't available after updating to the latest version of iOS
Sounds like the issue you are describing. Please check it out.
Take care,
Nubz -
after update to the latest version, the tinny pic in front the bookmarks disappeared. I think it is called the identity info...
when I go to the website, they will appear on the tap, but when I go through my bookmarks, they are not there, usually they are remembered after the first visit.
This bothers me...Hi endless121,
You should take a look at [https://support.mozilla.org/en-US/kb/latest-firefox-issues this article] that discusses some of the issues with the latest build of Firefox.
There is some information in there that should help you to resolve your issue. Luckily, it is a very easy fix.
Hopefully this helps! -
The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" -
When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?
Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
My Iphone 4 crahsed a few months ago when I tried to update and i have used Itunes already and it updated to the latest version of itunes but it says there is an erro and cannot be restored, I'm not sure why it is saying that, can I get some help?
Hi Alyssa_fagundes,
Thanks for the question. Based on what you stated, it seems like you need help restoring an iOS device. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?
Download 9.1 and 9.2.3 updates and install them
-
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.
iPhone 4, iOS 5.1.1If might be helpful if you actually told us what the problem is.
-
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
I recently tried updating to the latest version of Itunes, never had a problem, after downloading the installer attempts the undate I get a dialog box telling me to locate the installer package, I locate the download and I get a message:
the file C: users\eric\appdata\apple\applesoftwareupdate\itunes64.msi is not a vaild insallation package for the product Itunes. Try to find the installation package "itunes64.msi" in a folder from which you can install itunes.
I cant even install because I get the same message.(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy
Maybe you are looking for
-
How can I wirelessly mirror my iMac to 3 different displays?
I work at a school and they have digital picture frames set up on 3 floors that just run a slide show of images stored on the attached USB drives, but they are horrible quality and one just broke. I'm trying to find a solution that will allow me to r
-
Mac Pro 6 GB, Parallels 1910 and Vista RC1
Hi all, My 15 days trial expired yesterday so I couldn't try 1908, I've tried the first day two weeks ago and it was not working. So I'd like to know if somebody installed this config : Mac Pro 6 GB, 1910 and Vista RC1, since to test it I have to buy
-
Editing tree ui for MDM hierarchy tables in a WDJ aplication
Hi , We have a requirement where MDM hierarchy tables are displayed using a tree UI in WDJ application. However, tree UI is used only for the display purpose. Is there anyway or any other UI available using which we can achive edit option in the tree
-
Hi all. My system is BW7.0 patch 18. I recreated factviews and open one in SE12. My view is /BIC/VcubeF. In tab Tables I found only one table /BIC/Ecube, but I had expected to find /BIC/Ecube and /BIC/Fcube, because as I understood this view is a UN
-
Cannot close period 3/1998 with MMPV
Hi all, I try to close period 3/1998 with mmpv . But i get an error "The specificed year 1998 is not the current carendar year". When i try with 3/2007 and execute. i got an error Close Period for Material Master Records L O G Mode: Check and c