LIGHTROOM 5 UPGRADE INSTALLATION ISSUE...

I purchased the Lightroom 5 upgrade after the free trial was complete. I have the Mac 12.1 desktop. I enter the new serial number, then the previous serial number. Once i click the "finish" button, NOTHING happens. I've tried uninstalling, then installing. I've also tried turning the wifi on and off..... WHATS THE ISSUE????

Similar Messages

CS3 upgrade - installation issues

Hello there,
I recently purchased a second hand copy of Adobe CS2 Standard with a CS3 upgrade.
Filled in a transfer of licence that went through.
Anyway I was advised to install CS2 first before the CS3 so I did this but when I went to install CS3, I faced this problem:
http://dl.dropbox.com/u/627206/Picture%208.png
It will only allow me to tick the install Adobe 8. The rest shows up as 'already installed.'
I have tried uninstalling all the adobe products, using app cleaner and installing on the CS3.
But still no luck.
Called Adobe support but they said they no longer support CS3.
Grr.
Anyway, any help would be greatly appreciated, thanks!

Hi, thank you for your quick response!
I tried that several times but still not working...
I am working in CS2 for now but when I open any illustrator files I created in CS3, it corrupts it.
Scary stuff!
Pleaaaase help!

TCS 4 upgrade installation issue

Hi,
Our IT department could not get the downloaded update (TCS 3.0 to TCS 4.0) to install properly. It would pause and ask for Disk 2 (??) with no option for directing it to the downloaded files. I downloaded the trial version and installed it; seems to be working OK (without the serial number).
Can I register the trial version that is currently installed with the serial number I have been provided? If yes, then how do I register? Or, is it safer to allow the trial period to expire and then provide the serial number? I don't see where I can enter the serial number with the trial version.
Thanks!

I think some installation files may be missing in your downloaded setup and hence you are getting the prompt for Disk 2. Please try a fresh download from the web installer.
You can register your trial with a Adobe ID and a serial number anytime. When you launch the product, a Trial screen comes up. Select License Your Software button, then enter your Adobe ID ( you will need to create a new one in case you don't already have it). Once registered, you will get Serial Number screen where you can enter the serial number provided to you.
Hope that helps,
Anchal Arora
Adobe Engineering

Lightroom 5 installation issue

Hi
I have downloaded CC on a trial. Photoshop is working well but LR was saying that there was a error and could not create a catalogue. I want to uninstall LR but it is not giving me the option. It is only allowing me to uninstall Photoshop but my CC desktop is saying that LR is installed and up to date??
How can reinstall LR?

did you open your control panel to try and uninstall lr?

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Upgrade - Installation CRM 7.0 with W2K3 and J2EE AddIn

Hi all,
Because of the end of maintance I have to upgrade CRM 4.0 to CRM 7.0.
During the upgrade phase Iu2019ve detected changes within the CRM System installation and architecture.
First thing I discover was that itu2019s not possible to install CRM 7.0 with the W2K3 64bit OS.
You have to install the system with Windows 2008 Standard 64bit Edition.
All our SAP Systems running with W2K3 64bit OS with very good performance and that is why itu2019s our standard OS.
The different between W2K3 and W2K8 is enormous. (Everyone who changed from WinXP to Win Vista knows what I mean.)
Even the change of the SAP Kernel causes yet unknown problems
But I thought so what, thatu2019s IT and upgraded the ABAP stack to 7.0
The upgrade was fine and finished.
After that I would like to install the missing J2EE Components and TREX.
But the next catch Iu2019ve discovered was that it isnu2019t possible to install the J2EE Engine as an AddIn Installation into the upgraded ABAP Engine.
Wow, thatu2019s a thing!!!!
Our company IT strategy is System consolidating and now I should make 9 out-of 3 systems.
(DEV-QS-PROD Landscape)
Not to mention the administrative complexityu2026.
Now Iu2019m searching for solutions to avoiding this problems.
For the J2EE AddIn installation I want to try a intermediate upgrade to a former CRM Release where a AdIn Inst is possible (e.g. CRM 5.0 or something) and than upgrade to CRM 7.0
But whatu2019s about the prescribed OS W2K8?
As far as I know there is no SAPinst for a CRM 7.0 Upgrade/Installation under W2K3.
Ok, for a company with a huge webshop it makes sense, but our webshop isnu2019t so big that there could be same performance problems.
As noted before, all our SAP Systems running with a W2K3 64bit OS and we donu2019t have performance problems.
Does anyone have an idea how I can solve my CRM 7.0 Inst/Upgrade Problems?
Best regards
Mario Fischer

Hi Mario,
We installed CRM 7.0 a couple of months back with DVD- 51035700 (Master) on a Win 2003 server.
NW 7.01 (base for CRM 7.0) is supported on Win 2K3...but PAM does mention 2008 exclusively for CRM 7.0
As far as the Java Add In is concerned, ABAP & JAVA stacks have been seperated in order to simplify things.
The dual stack was difficult to administer & manage; hence, now you need to install 2 different systems & connect them via JCO.
We had a 16 GB server for CRM 7.0, which instead of hosting one "ABAP+JAVA" system, now has 2 systems (a seperate ABAP system & a seperate JAVA one)..n so far we havn't faced any issues as such.
In fact it's a good thing that since the 2 stacks have been seperated, the dependancy factor's been minimized.
Thanks,
Have a nice day,
S
Edited by: Saba Sheikh on Feb 24, 2010 1:08 PM

Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5

Hi all
After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
error 1719 Windows installer issue.
I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
Dave
DJH

Hi Lenora
See below
Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
03-19-2013,17:33:38 : CSetupApp::ScanXML
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
03-19-2013,17:33:38 : MSI Version = 3.1
03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : System Central Processor = 64
03-19-2013,17:33:38 : Product Type = SETUP_BEX64
03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Product Version = 12.5
03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Equal PID
03-19-2013,17:33:38 : Product version: 12.5.2213
03-19-2013,17:33:38 : StartBESequence
03-19-2013,17:33:38 : Executing BE_PreCheckInstall
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing StartBESequence
03-19-2013,17:33:38 : Pulling user data from the MSI
03-19-2013,17:33:38 : Upgrade state set to 0
03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
03-19-2013,17:33:38 : MSI processing complete
03-19-2013,17:33:38 : Pulling user data from the command line
03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
03-19-2013,17:33:38 : After check for parameter file exists.
03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
03-19-2013,17:33:38 : After Check for INSTALL_MODE.
03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
03-19-2013,17:33:38 : Ignoring the TSM switch.
03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
03-19-2013,17:33:38 : Not in Maintenance mode
03-19-2013,17:33:38 : Getting the Silent Params.
03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
03-19-2013,17:33:38 : List of switches set follows:
03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
03-19-2013,17:33:38 : /SNO: = 0930292112010690
03-19-2013,17:33:38 : /USER: = backup
03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
03-19-2013,17:33:38 : /PASS: = ********
03-19-2013,17:33:38 : /TS:
03-19-2013,17:33:38 : /TD: = ALL
03-19-2013,17:33:38 : /DOCS:
03-19-2013,17:33:38 : /LOADER:
03-19-2013,17:33:38 : /AOFO:
03-19-2013,17:33:38 : /EXCH:
03-19-2013,17:33:38 : /SQL:
03-19-2013,17:33:38 : /NTA:
03-19-2013,17:33:38 : /RAULUS:
03-19-2013,17:33:38 : /DBSERVER:
03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
03-19-2013,17:33:38 : /BACKUPDATA: = 0
03-19-2013,17:33:38 : /MAC:
03-19-2013,17:33:38 : Command line processing complete
03-19-2013,17:33:38 : Install set to run in UI mode
03-19-2013,17:33:38 : CDlgPushWelcome::Pass
03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
03-19-2013,17:33:43 : Validating license data
03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:33:44 : Connected to SQL Server.
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:05 : After Check for Remote_Install.
03-19-2013,17:34:05 : After Check for RA_INSTALL.
03-19-2013,17:34:07 : Validating serialization data
03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
03-19-2013,17:34:07 : After Check for INSTALL_MODE.
03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:34:07 : On Init of CDlgChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
03-19-2013,17:34:12 : Validating Local Options Data
03-19-2013,17:34:13 : Validating service account data
03-19-2013,17:34:13 : CDlgSSO Pass Function.
03-19-2013,17:34:13 : After Check for INSTALL_MODE.
03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : Validating DlgChooseDBServer data
03-19-2013,17:34:20 : Drive C: Required: 1102 MB Available: 37138 MB
03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:20 : CDlgCAS Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : CDlgClone Pass Function.
03-19-2013,17:34:20 : CDlgClone not passed.
03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : Install Summary XML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
03-19-2013,17:34:20 : Install Summary XSL File:
03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
03-19-2013,17:34:20 : Install Summary HTML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
03-19-2013,17:34:20 : Not Quickstart Edition
03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
computer. The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:27 : Executing InstallLiveUpdate.
03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Vista or Longhorn server. Not installing .NET Frameworks.
03-19-2013,17:34:40 : .NET Framework was detected. Skipping install.
03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:34:41 : m_bUseNativeClient = 1
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
03-19-2013,17:34:41 : SQL Server version 9
03-19-2013,17:34:41 : SQL version returned: 9
03-19-2013,17:34:41 : Executing SQL_GetServicePack.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
03-19-2013,17:34:45 : V-225-53: ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601. ***To search for information about this error, click
here
03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
03-19-2013,17:34:45 : Failed to install third party products.
03-19-2013,17:37:25 : Validating install complete
03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:37:25 : Removed files:
03-19-2013,17:37:25 : ERROR: Installation failed with error 1603.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:41:16 : Windows Operating System Version: 6.1
03-19-2013,17:41:16 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:41:18 : Executing managed _Setup:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:41:18 : Loading XML from:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:41:19 : Launching UI Install
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:19 : m_bUseNativeClient = 1
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:41:20 : CopySupportFiles
03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:41:28 : Typical install value is set to : True
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:43:04 : Install is not executing as the service account.
03-19-2013,17:43:04 : Successfully Logged on as service account.
03-19-2013,17:43:04 : Successfully impersonated service account.
03-19-2013,17:43:04 : EUserName value successfully written to the registry.
03-19-2013,17:43:04 : EPassword value successfully written to the registry.
03-19-2013,17:43:04 : EDomain value successfully written to the registry.
03-19-2013,17:43:09 : There were no remote computers selected for install
03-19-2013,17:43:09 : m_bUseNativeClient = 1
03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:43:10 : Terminal Services enabled.
03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:43:11 : Executing InstallLiveUpdate.
03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:36 : Starting Install
03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:44:36 : Discovered Total Actions: 115
03-19-2013,17:44:36 : The return code from the MSI is: 1601
03-19-2013,17:44:36 : Cleaning up the symc status key
03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:44:36 : Clean up Symantec installer keys.
03-19-2013,17:44:37 : Terminal Services enabled.
03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:45:28 : Gathering Telemetry items
03-19-2013,17:45:28 : Failed to start the management service
03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,17:45:28 : Sending Telemetry to Symantec
03-19-2013,17:45:28 : Transmit Telemetry initialized.
03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,17:56:31 : Windows Operating System Version: 6.1
03-19-2013,17:56:31 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:56:33 : Executing managed _Setup:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:56:33 : Loading XML from:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:56:34 : Launching UI Install
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : m_bUseNativeClient = 1
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:56:35 : CopySupportFiles
03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:56:49 : Typical install value is set to : True
03-19-2013,17:56:50 : Executing SQL_GetServicePack.
03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : Executing SQL_GetServicePack.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:57:37 : m_bUseNativeClient = 1
03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:58:41 : Install is not executing as the service account.
03-19-2013,17:58:41 : Successfully Logged on as service account.
03-19-2013,17:58:41 : Successfully impersonated service account.
03-19-2013,17:58:41 : EUserName value successfully written to the registry.
03-19-2013,17:58:41 : EPassword value successfully written to the registry.
03-19-2013,17:58:41 : EDomain value successfully written to the registry.
03-19-2013,17:58:51 : There were no remote computers selected for install
03-19-2013,17:58:51 : m_bUseNativeClient = 1
03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:58:52 : Terminal Services enabled.
03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:58:54 : Executing InstallLiveUpdate.
03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Starting Install
03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:59:08 : Discovered Total Actions: 115
03-19-2013,17:59:08 : The return code from the MSI is: 1601
03-19-2013,17:59:08 : Cleaning up the symc status key
03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:59:08 : Clean up Symantec installer keys.
03-19-2013,17:59:10 : Terminal Services enabled.
03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
03-19-2013,18:00:01 : The return code is: 0
03-19-2013,18:00:01 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:02:24 : Windows Operating System Version: 6.1
03-19-2013,18:02:24 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:02:26 : Executing managed _Setup:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:02:26 : Loading XML from:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:02:26 : Launching UI Install
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : m_bUseNativeClient = 1
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:02:26 : CopySupportFiles
03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:11 : The return code is: 0
03-19-2013,18:03:11 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:03:21 : Windows Operating System Version: 6.1
03-19-2013,18:03:21 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:22 : Windows Operating System Version: 6.1
03-19-2013,18:03:22 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:23 : Executing managed _Setup:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:23 : Loading XML from:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Launching UI Install
03-19-2013,18:03:24 : Executing managed _Setup:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : m_bUseNativeClient = 1
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : Loading XML from:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:24 : CopySupportFiles
03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:58 : Typical install value is set to : True
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:05:35 : Install is not executing as the service account.
03-19-2013,18:05:35 : Successfully Logged on as service account.
03-19-2013,18:05:35 : Successfully impersonated service account.
03-19-2013,18:05:35 : EUserName value successfully written to the registry.
03-19-2013,18:05:35 : EPassword value successfully written to the registry.
03-19-2013,18:05:35 : EDomain value successfully written to the registry.
03-19-2013,18:05:36 : There were no remote computers selected for install
03-19-2013,18:05:36 : m_bUseNativeClient = 1
03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:05:37 : Terminal Services enabled.
03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:05:38 : Executing InstallLiveUpdate.
03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Starting Install
03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:05:50 : Discovered Total Actions: 115
03-19-2013,18:05:50 : The return code from the MSI is: 1601
03-19-2013,18:05:51 : Cleaning up the symc status key
03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:05:51 : Clean up Symantec installer keys.
03-19-2013,18:05:51 : Terminal Services enabled.
03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
03-19-2013,18:06:32 : The return code is: 0
03-19-2013,18:06:32 : SUCCESS: Installation has completed successfully.
03-19-2013,18:07:36 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:07:39 : Error initializing shared data
03-19-2013,18:07:39 : ERROR: Installation failed with error 1603. GetLastError = :0
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:47 : Launching UI Install
03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : m_bUseNativeClient = 1
03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:13:48 : CopySupportFiles
03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:13:54 : Typical install value is set to : True
03-19-2013,18:13:55 : m_bUseNativeClient = 1
03-19-2013,18:13:55 : Executing SQL_GetServicePack.
03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : Executing SQL_GetServicePack.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:16:09 : Service account specified is not valid
03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
03-19-2013,18:16:10 : Error validating service account credentials.
03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:16:20 : Install is not executing as the service account.
03-19-2013,18:16:20 : Successfully Logged on as service account.
03-19-2013,18:16:20 : Successfully impersonated service account.
03-19-2013,18:16:20 : EUserName value successfully written to the registry.
03-19-2013,18:16:20 : EPassword value successfully written to the registry.
03-19-2013,18:16:20 : EDomain value successfully written to the registry.
03-19-2013,18:16:22 : There were no remote computers selected for install
03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:16:23 : Terminal Services enabled.
03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:16:25 : Executing InstallLiveUpdate.
03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Starting Install
03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:16:39 : Discovered Total Actions: 115
03-19-2013,18:16:39 : The return code from the MSI is: 1601
03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:16:39 : Clean up Symantec installer keys.
03-19-2013,18:16:39 : Cleaning up the symc status key
03-19-2013,18:16:41 : Terminal Services enabled.
03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:09 : Gathering Telemetry items
03-19-2013,18:17:09 : Failed to start the management service
03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,18:17:09 : Sending Telemetry to Symantec
03-19-2013,18:17:09 : Transmit Telemetry initialized.
03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
03-19-2013,18:17:33 : Telemetry transmission failed. Data was not sent.
03-19-2013,18:17:33 : The return code is: 1601
03-19-2013,18:17:33 : ERROR: Installation failed with error 1601. GetLastError = :0
03-19-2013,18:17:48 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:17:51 : Error initializing shared data
03-19-2013,18:53:53 : m_bUseNativeClient = 1
03-19-2013,18:53:53 : Executing SQL_GetServicePack.
03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : Executing SQL_GetServicePack.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : m_bUseNativeClient = 1
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:58:06 : Windows Operating System Version: 6.1
03-19-2013,18:58:06 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:58:08 : Executing managed _Setup:
03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:58:09 : Loading XML from:
03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:58:09 : Launching UI Install
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : m_bUseNativeClient = 1
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:58:10 : CopySupportFiles
03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:58:15 : Typical install value is set to : True
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:59:43 : Install is not executing as the service account.
03-19-2013,18:59:43 : Successfully Logged on as service account.
03-19-2013,18:59:44 : Successfully impersonated service account.
03-19-2013,18:59:44 : EUserName value successfully written to the registry.
03-19-2013,18:59:44 : EPassword value successfully written to the registry.
03-19-2013,18:59:44 : EDomain value successfully written to the registry.
03-19-2013,18:59:46 : There were no remote computers selected for install
03-19-2013,18:59:46 : m_bUseNativeClient = 1
03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:59:47 : Terminal Services enabled.
03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:59:49 : Executing InstallLiveUpdate.
03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Starting Install
03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,19:00:03 : Discovered Total Actions: 115
03-19-2013,19:00:03 : The return code from the MSI is: 1601
03-19-2013,19:00:03 : Cleaning up the symc status key
03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,19:00:03 : Clean up Symantec installer keys.
03-19-2013,19:00:05 : Terminal Services enabled.
03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:10 : Gathering Telemetry items
03-19-2013,19:00:10 : Failed to start the management service
03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,19:00:10 : Sending Telemetry to Symantec
03-19-2013,19:00:10 : Transmit Telemetry initialized.
03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
03-19-2013,19:00:10 : The return code is: 1601
03-19-2013,19:00:11 : ERROR: Installation failed with error 1601. GetLastError = :0
DJH

Adobe Revel 2.3.2 installation issue

Dear Revel users:
We are aware of the installation issues people are experiencing with the latest iOS version release, and we are very sorry for the inconvenience it has caused.
We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue has occurred with the way our App is getting bundled up for delivery to customers. We are working closely with Apple to resolve the issue as soon as possible, and we've re-submitted an update to see if this can help us narrow down the failure. Thank you for your patience. Meanwhile, feel free to access Revel via your web browser, Mac, windows 8, Android devices.
I will update this thread when I get new information.
Regards,
Pattie

Dear Revel users:
As you may know, many users had issues installing Revel iOS update version 2.3.2. We are pleased to inform you that the issue has been resolved. We know how frustrating it must have been to not be able to access your photos and videos, and are truly sorry for all the inconvenience.
Please go to the App Store and update your app, and thank you for your patience as we worked to resolve the issue. Please ensure that your operating system is on iOS version 7.1 or above when updating the app. We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue occurred with the way our App was getting bundled up for delivery to customers.
If you are unable to upgrade to iOS version 7.1 or above at this time and can not load revel from the app store on your device, please download the latest version of the Adobe Revel app from iTunes to your computer and sync it to your iPhone, or iPad. If you are unfamiliar with this process, please plug your iOS device in to your computer with the USB cord that came with your device. Launch iTunes on your computer and select help > iPhone or ipad user guide. There are help topics there that will explain how to connect and sync your device.
If you have any more questions or are still experiencing problems, please go to our user forums and post to this link : https://forums.adobe.com/thread/1513106. Again, please accept our sincerest apologies and thank you for your patience.
The Adobe Revel team

Lightroom 5 installation stalls

I have Lightroom 4 and PS CS6, and I just purchased CC for photographers. The first thing I tried to do was install LR 5 from the CC app. It got as far as 47%, then stalled. After 90 minutes, I cancelled the installation, rebooted my computer, and tried again. Same result -- it is now stalled at 47% and has been that way for over 2 hours. I have over 200GB of open disk space, so I don't think that's the problem. I'd appreciate any suggestion as to what to do next. Thanks.
Kelly

KellyMC I would recommend reviewing the installation logs for the Lightroom 5 installation. You can find information on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Lightroom 5 installation keeps failing

Lightroom 5 installation keeps failing.
Solution mentioned here doesn't work, because my default installation language is English. The installation process stops and shows there's an error but doesn't actually show the error message. The system language on my laptop is Russian.
I had a trial installed previously and now need to activate it with my Creative Cloud membership but it's been about two weeks since I purchased it and it still doesn't work!

Hi,
I’m sorry to hear that! Not sure why it worked for me but not for you. I’d like to check the steps you made just to make sure…
What OS or you using?
I removed Lightroom from Creative Cloud. – So there is no error showing.
I downloaded the: Lightroom_5_LS11_win_5_2 from the link.
Unpacked it to the desktop (any folder will do).
Then I navigated to the folder and installed Lightroom_5_LS11_win_5_2.
Re opened CC and clicked install. It then install the 5.3 update.
If you followed all these steps and still have no luck then A, let me know. And B, you may have to wait for Adobe to fix the issue.
I’ll troll the internet for you too.
There are still more things we can try, so don't give up!
I love Lightroom and feel your pain!
Thanks,
Mike

Leopard Upgrade Installer Does Not See Hard Drive

I am trying to run the Leopard Upgrade installer on my G4 1Ghz x 2 PowerMac, but the installer thinks for a couple seconds and then tells me "Mac OS 10.4 or later can not be found on your computer" even though it is running 10.4.10.
Also, if I go to the Startup Disk or Disk Utility window, my hard drive does not show up.
Anyone found a solution to this problem?

Good to know for the future. I agree with the writer. A progress bar would have been nice...
I had other issues than that, unfortunately. The installation started off fine (meaning, it found my HD right away and started chugging along), then ended up with the "installation failed" error. After that, it couldn't detect the HD, either with Startup Disk or through the installer.
That's when I ran Disk Utility. Seemed to work.
Now, I'm tempting fate by trying things again. Glutton for punishment? Maybe.

Attempted to Install 2.3 upgrade,installer folder installed into harddrive but application will not open or replace 2.0 as it says it "should" . I have tried too many times now. Always same response.

I installed 2.3 upgrade,
installer folder is in harddrive but application will not open or replace 2.0 as it says it "should". When I attempt to it just reinstalls the installer, never the functioning application. I have tried too many times now. Always same response. WOuld love to upgrade ( and purge all the alias 2.3 off hardrive!

when I went to the library folder there was no receipts only
com.adobe.Reader whihc included install.log
so I guess that means something is missing?
If above still doesn't resolve problem - go to the folder named
"Receipts" in the Mac OS X Library folder (i.e. the main Library
not you Users Library) and delete the file named Adobe Photoshop
Lightroom 2.pkg
>

"Product is not installed" message when running weblogic upgrade installer

Hi,
I have successfully installed WLS 10.3.5 and JDeveloper Studio using jdevstudio11116install.jar installer on my local machine running Windows 7 64-bit Enterprise Edition . Now when I try upgrading WLS to version *10.3.6*, using wls1036_upgrade_generic.jar, I run into "*Product is not installed*" message. I tried even running wls1036_upgrade_win32.exe and the results are the same.
Appreciate if someone could tell me what I am doing wrong. I only followed the WLS install/upgrade documentation but looks like something is amiss.
Thanks.

Hi,
Appreciate if anybody out there can help me with the problem. I am wondering if the message cropped up due to the fact that I am trying to run a product upgrade specifically targeted at WebLogic Server instead of running a upgrade installer for jdeveloper since WLS 10.3.5 came with JDev installer in the first place. I am not aware if upgrade installlers are available for jdevstudio. Another way to put this is, I should have run WLS 10.3.5 installer first(instead of jdev) and the 10.3.6 upgrade installer next. That probably might have worked. Then again I am not sure this is correct.
Appreciate any help on this.
Thanks

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

LIGHTROOM 5 UPGRADE INSTALLATION ISSUE...

Similar Messages

Maybe you are looking for