Lightroom 5 version 5.0 starts out fast, but then slows my computer to a crawl. What to do?
I upgraded from Lightroom 4 to Lightroom 5 after the release version 5.0 came out. But it doesn't work well. It starts out fast, but performance rapidly deteriourates. And it affects every application running on my Windows 7 PC. I assume this is due to massive memory leaks. The only way out seems to periodically reboot my machine.
I've had this happen without doi
ng exports (which was reported as a cause of this behavior by others). I get it just using the Developer module and having many steps with many photos. Also with the Book module it happens very soon. Does anyone have a workaround until Adobe actually fixes their product so it works right?
I'm having the same issue. I'm running the trial version, but in 3 days when the trial is over I don't expect to upgrade. LR4 works great on my machine. LR5... there's a problem here Houston. Fix it and then I'll think about upgrading.
BTW - the tool I had high hopes for - the enhanced spot heal/clone tool... good idea, but needs work.
Similar Messages
-
Oh, good, space. I was using ver 8.x; it was working fine. I left for a couple of hours. When I returned it had slowed to a crawl and was unusable. I'd been getting nagged to update, so I did that first. Cleared cache, cookies, history. Disabled hardware acceleration. Restarted Win (XP SP3), ran a virus check, etc., all the usual stuff. Don't have a proxy. The behavior looks like very, very bad lags. Often the page refreshes itself over and over as it loads. This happens on EVERY page. Chrome and Safari are working fine. I would love my Firefox back so any help appreciated.
Hi mpblonestarlady,
Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-slow-or-takes-too-long-start performance troubleshooting section]? There is a lot of good information in there that should help.
Hopefully this helps! -
My computer is taking forever to boot up and when it finally does it starts running fast and then freezes...I have cleaned out and backed up files, as well as utilitzed Mac Keeper...Do I need to upgrade to Mountain Lion. or download new firmware?
Uninstall MacKeeper, it's crap.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
When that's done, then run through the Steps and tune up your machine.
..Step by Step to fix your Mac -
When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing. -
Pressing play on purchased downloads and it starts to download but then returns to the play button. This is for all the purchased items I have. However pressing play on previews works. Please advise.
Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
Also check your payment details, make sure your details are exactly how they appear on your credit card statement, you might also try changing some of those details, saving them and changing them back again.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.
At this point in time, I’m wondering if this could be related to (but not restricted to) the new feature that allows others to come into your home and use your Apple TV to download and play their content on your Apple TV without logging into their account on your Apple TV. The Terms of Use for iTunes Store content have always been to require you to only purchase and play the content from the store in the location where you live and to use a credit card registered in that location. Previously Apple seem to have been somewhat lenient on enforcing such restrictions, perhaps now they are not. However I don’t really have any evidence to support this suggestion, except that changes made to accounts in these areas do appear to be helping many.
If you are successful in resolving your problem, perhaps you would let us know exactly which action resolved the problem for you. If you are having this problem to begin with, can you also tell us your location. -
Facetime on ipod starts to open but then closes
On the iPod when I start to open FaceTime the program starts black background but then the screen automatically closes. If you look at the open Apps is still apears open but you can't use it. It will accept incoming, but you can not send out. iOS 8.1.2
Does the front camera work in Camera app?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway. -
my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?
How much free disk space do you have and how much memory do you have, running which operating system? Need that information to have any basis to make recommendations.
-
I am having trouble accessing itunes store. It starts to load but then goes blank.
I can not access the Itunes store. It will start to load but then goes blank. Not sure what to do.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now. -
i have an iphone 4s version 6.1 carrier o2-uk but it will not pick up any signal what do i do?
I got my real add-on work on FF4 now. Here is what needs to do (on VS2005)
In project property<br>
C++<br>
General/Additional Include Directories - xulrunner-2.0.en-US.win32.sdk\xulrunner-sdk\include<br>
Preprocessor/Preprocessor Definitions - MOZ_NO_MOZALLOC;XP_WIN;XP_WIN32
Linker<br>
General/Additional Library Directories - xulrunner-2.0.en-US.win32.sdk\xulrunner-sdk\lib<br>
Input/Additonal Dependencies- nspr4.lib xpcom.lib xpcomglue_s_nomozalloc.lib
Update module cpp by following the sample<br>
http://mxr.mozilla.org/mozilla-central/source/xpcom/sample/nsSampleModule.cpp
Add two extra directives on chrome.manifest<br>
interfaces <path/to/your/xpt><br>
binary-component <path/to/your/dll>
Add unpack property to install.rdf if needed
https://developer.mozilla.org/en/Install_Manifests#unpack -
My iPod syncs about 350 songs out of 3000 then stops syncing abruptly. Any ideas whats going on?
My iPod Classic syncs about 350 songs out of 3000 then stops syncing abruptly. Any ideas whats going on? It was working fine up to a couple of days ago and i'ts barely over a year old.
Hi Owen7777,
Your problem may be the same as described in this topic: https://discussions.apple.com/thread/4142872?tstart=0
The issue is described along with tips. It is most likely to be the hard drive.
Good Luck,
Stefan -
Updating to Lightroom 5.7 on my Mac installs ok, but then crashes on application start
I was successful in installing LR 5.7 on top of my existing 5.6 installation, but then on start-up the application crashes with the following error
Any ideas??
Cheers, Alex
Process: Adobe Photoshop Lightroom 5 [645]
Path: /Applications/Adobe Photoshop Lightroom 5.app/Contents/MacOS/Adobe Photoshop Lightroom 5
Identifier: com.adobe.Lightroom5
Version: ???
Code Type: X86-64 (Native)
Parent Process: launchd [155]
Responsible: Adobe Photoshop Lightroom 5 [645]
User ID: 501
Date/Time: 2014-11-19 22:50:16.935 +0100
OS Version: Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 800C35BF-38E6-B19C-E0D6-270BE38D4737
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/asneu.framework/versions/a/asneu
Referenced from: /Applications/Adobe Photoshop Lightroom 5.app/Contents/MacOS/Adobe Photoshop Lightroom 5
Reason: image not found
Binary Images:
0x7fff6bc0d000 - 0x7fff6bc40817 dyld (239.4) <7AD43B9B-5CEA-3C7E-9836-A06909F9CA56> /usr/lib/dyld
0x7fff8a83f000 - 0x7fff8ab3fff7 com.apple.Foundation (6.9 - 1056.16) <24349208-3603-3F5D-95CC-B379616FBEF8> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8be28000 - 0x7fff8c99eff7 com.apple.AppKit (6.9 - 1265.21) <9DC13B27-841D-3839-93B2-3EDE66157BDE> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST2000LM003 HN-M201RAD, 2 TB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:I am having the same problem too. LR 5.7 constantly crashed upon opening. It's a real pain in the.... JDH92 you seem to have posted a good fix. Unfortunately I am having problems deciphering it. You wrote: "
It's an issue with case sensitivity in the file path for the library. My disk partition has case-sensitive file names enabled, which is probably why it doesn't affect everyone.
dyld is trying to load '@executable_path/../Frameworks/asneu.framework/versions/a/asneu'. The actual path on disk is '/Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/asneu.framework/Versions/A/asneu'.
By renaming the directories 'Versions' to 'versions' and 'A' to 'a', Lightroom was able to execute. I haven't done much testing, so there could be other case sensitivity issues.
JDH, a few questions please:
1. What is dyld?
2. Where and how did you find '/Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/asneu.framework/Versions/A/asneu'?
Thanks a lot!! -
Firefox starts fast but runs slow
I have changed security software to McAfee as zone alarm was giving me problems. I reinstalled Firefox and xmarks Firefox will load fast but when I click on my bookmarks I wait for a long time then when I click on the book mark that I want to use it takes for ever to load
== This happened ==
Every time Firefox opened
== just download Firefox again ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5Hello Donald.
This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
#clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can't help you further. -
For awhile, since the newest update, I'd noticed when charging the ipod (classic) that it stopped going to the charging screen and would stay on the Connected: Eject before disconnecting' screen. But, y'know, didn't matter to me, it still charged... until today when I tried to add music. Tried it many times, reset it... STILL wouldn't transfer songs... It would 'say' it was syncing, but then suddenly stop and stay on the same Connect: please eject before disconnecting' page. I did a couple of times get a message about scanning it but, after restoring that never popped up again...
So, I do a system restore on it and ofcourse THAT works, but it STILL won't sync! So, now I've got an ipod with no music that won't sync and because it's all gone on there, I'm not sure how to back up my stuff (should I need to re-install iTunes... Though I doubt it'd work...)... So, yeah, I tried a different cable too, still no luck...
There has GOT to be some way to fix this!
Please somebody help me out! I so freaking appreciate it you have NO idea!I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply. -
I downloaded an audiobook and it started working but then it stopped. Is there anyway I can redownload my audiobook so that it starts working completely?
This is a ridiculous policy and it interferes with how most people would listen to an audio book since they are quite lengthy. I'm traveling, so I throw the audio book on using my iPad and I get 60% of the way through the book on my trip. I come home, I want to listen to the rest of it via iTunes on my stereo through AirPlay. And this can't be done?
This is the last audiobook I buy from iTunes until they *fix* this... and it IS something that requires fixing whether that means negotiating more aggressively with the audiobook providers or changing something at the software layer. It completely ruins many peoples' experience!
It's funny because a friend of mine suggested buying it, then downloading it from a torrent just so I could use the book the way I wanted to use the book. Is it not sad that to create a positive overall user experience you have to resort to downloading something off a torrent?
iTunes is supposed to make things easy and accessible. I agree with jamusick's posting -- this isn't the vision Steven Jobs had for the future. This is a road block on the way there.
Maybe you are looking for
-
How can I move an iTunes song to Finder?
I am trying to organize my songs. I have a number of songs on playlist in iTunes that I would like to transfer to iTunes. So far none of my attempts have been successful. How can I do this?
-
Flash cs4 mac - Error opening URL '/:Users:someting.swf' - Not a "loading external content" problem
Hello. I am having a weird problem when trying to test a movie or publish preview -> flash on mac with Leopard os. The result is a blank movie with the usuall "movie not loaded" if u right click on it and the output returns the "Error opening URL 'th
-
How to fin the Workcenter after getting Task list type
Hi all , I got the fields PLNTY(Task List Type ) , PLNNR(Key for Task List Group) , ZAEHL(Internal counter ) and VORNR (Operation/Activity Number) from PLPO table . I need to get the work centers names . I saw the work centers are in CRHD ta
-
Using WLST to set up credential mapping on JDBC Data Source
I am wanting to write a script (WLST) to set up a large initial set of credential mappings on a JDBC data source. I can create the datasource and do all the basic set ups, but I can't figure out how to do the credential mappings. I tried the "record"
-
Does firefox allow a tab to be duplicated ? Cannot find it in the options ...