Lightroom 6 / CC - Intel HD4400 (and others?) - fix for blue square in Develop module

Just a note for anyone using an Intel HD4400 GPU (or possibly other Intel GPUs) - I've found that I need to Turn Off the Conservative Morphological Anti-Aliasing in the 3D section of the Intel Graphics Control Panel to get rid of the blue square in the Develop module problem.

I'm one of the people who talked about how fast it is. BUT after a few solid hours of using it I'm noticing that the interface is still unbearably laggy. Certain things quicker, gradients for example.  One thing that was unbelievably slow for me today was waiting for it to draw a 1:1 preview - it took a minute from a d800 raw file (and it was doing nothing else). Other times its taking ~15 seonds (twice as long as previously).  In the develop module it takes 4-6 seconds before I can edit an image.
In the meantime my system has gone from a xeon x5650 to an i7 960. I expect things will speed up again when I reinstall the xeon. 

Similar Messages

  • I use a Mac, new to lightroom, I purchased the software, and now I cannot get into my develop module because it is telling me that I need to renew my membership ?  Lost !!!  lost in a dark cold cave of lightroom someone please help me !!

    I cannot get into my develop module on lightroom, it is telling me to "please renew my membershipto reactivate the develop module"  I do not understand.  I bought the software must I pay a membership as well ?  Also I do not want to use lightroom mobile and it is trying to sync my photos.  I use a MAC

    Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
    The license key for the perpetual version will not be accepted to activate the CC version.
    Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
    If this is not the situation you face then provide some more details.

  • LR3 Fix for Crash when using Develop Module

    Adobe tech provided the following fix for my system which crashed when switching to the Develop module.
    This is the  response I received from Adobe Tech.  
    Recreating the preferences file corrected the problem.
    Their help was right-on and appreciated.
    Ed
    * to Customer**
    06/11/201018:11:12
    Hi Ed,
    Thank you for getting back to us. I appreciate your promptness in
    responding to our email.
    The information provided was really helpful in understanding the issue.
    In order to resolve this issue I would request you to perform the below
    mentioned steps in order to resolve this issue:
    * Remove Lightroom beta from your system as you have the the full
    purchase version Adobe Lightroom 3.0 (Because there may be conflicts
    between the Beta Version and original product)
    * Try to create new Catalog with some new images and check if you are
    facing the same issue with Develop module.
    * Check if other functions are working fine like Slideshow, Print, Web.
    If the problem still exist after removing the Lightroom beta version
    from your PC, then perform the below mentioned troubleshooting steps:
    * Re-create the Photoshop Lightroom preferences file.
    Re-create the Photoshop Lightroom 3.0 and 1.x preferences files to
    eliminate problems that a damaged preferences file might cause. If you
    do not delete your 1.x preferences as well as your 3.0 preferences,
    other issues may occur.
    To re-create the Photoshop Lightroom preferences file:
    1. Quit Photoshop Lightroom.
    1. Rename the Lightroom 3 Preferences.agprefs file (for example, to
    Lightroom 3 Preferencesagprefs.old) and the Lightroom Prefere
    nces.agprefs file (for example, to Lightroom Preferences.old) in the
    Documents and Settings/[Username ]/Application
    Data/Adobe/Lightroom/Preferences folder.
    1. Start Photoshop Lightroom. Photoshop Lightroom creates a new
    preferences file.
    If the problem continues, the preferences file isn't the cause. To
    restore custom settings, delete the new preferences file and restore the
    original name of the previous preferences file.
    * Also Send us the Image size and format on which your are working in
    Lightroom hence resulting in this issue.
    This should resolve your issue. If it does, please let us know, however
    in case it does not; please revert with any new information that you
    might want to add which will help us in resolving your issue.
    You can also try referring to our knowledge base and User to User forums
    by clicking on the following links:
    Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com

    Creating a new catalogue and importing the images does not resolve the problem.
    The problem is only occuring on a few images from a particular collection.
    Creating a virtual copy also will not edit in photoshop.
    Creating a virtual copy and reseting the develop settings will allow the ctrl-e command to work.
    However, manually re-applying the develop settings once again stops the ctrl-e command working.

  • [svn] 2312: CursorManager: New functionality and a fix for SDK-15029

    Revision: 2312
    Author: [email protected]
    Date: 2008-06-30 17:24:01 -0700 (Mon, 30 Jun 2008)
    Log Message:
    CursorManager: New functionality and a fix for SDK-15029
    * NEW: When the mouse leaves a window/stage where a cursor is set, the cursor no longer sits on the edge of the screen until the mouse comes back into the window, it disappears.
    * NEW: In AIR, when the mouse leaves an active window and glides over an inactive window (without giving it focus) where a cursor is set, the system pointer will be hidden and the custom cursor will appear while gliding over that window, and disappear when you leave that window.
    * FIX: When a cursor is set in a child Window, and the mouse moves over another Window or WindowedApplication, the cursor no longer disappears -- the correct system pointer or custom cursor will display.
    * Fixed listener leaks when switching systemManagers (neither Jason nor I can tell when/why it would happen in CursorManager, however).
    Reviewer: Jason
    Bugs: SDK-15029
    Doc: No
    QA: Yes, here's an exhaustive list of ideas:
    * We'll need tests for the new behaviors.
    * For all tests, we need to try behavior in air AND behavior in (sa)player, and test regressions.
    * Please test SDK-15583 again, all other cursor tests.
    * Take the test case for SDK-15029 and open up TWO MyWindows. Test how the cursors change across all three app windows when they are overlapped like a Venn diagram, with different combinations of custom cursors on and off -- we should have test cases for all of this behavior.
    * Test that custom cursors work properly when the mouse leaves a non-rectangular stage with transparency.
    * Test mouse drag situations -- drag off stage, release, move back to stage; drag off and back onto stage, etc.
    * In my tests, I found a lot of bad behavior in AIR, and player seemed to be fine. Do we have drag and drop use cases for AIR with custom cursors?
    A list of some bugs I encountered:
    * BUG (cosmetic): If the mouse is outside the stage when a cursor changes for the first time (say you toggle a checkbox which sets the cursor using the keyboard), the cursor will appear on the stage in the last known mouse position. When the mouse returns to the stage, everything will start working correctly again.
    * BUG (cosmetic): In AIR, if you drag out, and back into the window, then release, a MOUSE_OUT is fired again over the stage, which is wrong. The mouse coords given are (-1,-1), also wrong. This causes the system cursor to show instead of the custom cursor.
    * BUG: In AIR: if you drag off the edge of a Window with a custom cursor, the cursor will vanish. The MOUSE_OUT event correctly event fires while dragging off the window. Even though the handler tells the system mouse cursor to appear, it doesn't -- might be an AIR issue, since the mouse is still dragging when told to show. If you move back over the active window without dragging, the cursor goes back to normal.
    * BUG: In AIR: if you drag over another window with a cursor, MOUSE_MOVE events don't fire on that other window until you let go. Therefore, a custom cursor in that window does not get drawn, nor does a system cursor. If you move back over the active window without dragging, the cursor goes back to normal.
    * BUG: In AIR: When dragging, off a window, Event.MOUSE_LEAVE only fires after the mouse is let go (unlike MOUSE_OUT), EVEN IF the mouse is dragged back over the window and released over the window. So you're told the mouse left when it didn't.
    * BUG: In Player: I could never get Event.MOUSE_LEAVE to fire when added to the stage in saplayer or browser.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15029
    http://bugs.adobe.com/jira/browse/SDK-15029
    http://bugs.adobe.com/jira/browse/SDK-15583
    http://bugs.adobe.com/jira/browse/SDK-15029
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s

  • Service packs and hot fixes for  BusinessObjects Enterprise XI 3.1

    Hello Experts.
    Which is the cronology or order of the service packs and hot fixes for  BusinessObjects Enterprise XI 3.1, or which are tha latest?
    thanks

    For BO XI 3.1, SP 5 is the latest, released in August 2011. You can directly install SP5 if you already have SP3 installed.
    Previous Service Pack is 4.0 and Fix Pack 4.1.

  • IPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    iPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    Hello TJLapplesupportcom,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps below to resolve this issue you're having with your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • Mac-specific drivers and other software for Windows

    Mac-specific drivers and other software for Windows how can I download them with out the install cd?

    Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work.

  • ? I downloaded the upgrade this morning -- 6/6/12 -- and noew I cannot get into the Develop module.

    ? I downloaded the upgrade this morning -- 6/6/12 -- and noew I cannot get into the Develop module. I get an error message.

    The problem seems to have been corrected. When I checked to make sure that all other modules were accessible, Lightroom 4 quit, restarted and then checked something - "power point curves", went through some kind of internal procedure, after whiuch the problem no longer existed. The error message had been : "An error occurred when attempting to change modules." I decided to respond in this way in case someone else stumbles into this.
    Thank You for responding.

  • Correct No. of Accounts and their Privileges for Installing SharePoint 2013 Developer Machine

    Hi Dear SharePoint 2013 Experts,
    I request you to kindly guide like; the Correct No. of Accounts and their Privileges for Installing SharePoint 2013 Developer Machine. Is there any step by step blog or Video on "Installing SharePoint 2013 Developer Machine".
    Tried Installing ALL in one single Virtual Machine using account spDeveloper (which is a Member of "Administrators" and "Domain Admins" Group(s). Any kind of SharePoint Web-Application and/or Sites (Developer-Site, Team-Site, ....) can
    be created including MySites and Intranet Sites.
    But when tried creating SharePoint App Project in Visual Studio 2013 and deploying, stuck here with 2 weird Issues like;
    1. This task requires the application to have elevated permission
    2. Error occurred in deployment step 'Install App for SharePoint': The System Account can not perform this action
    If Visual Studio 2013 is run NORMALLY (WITHOUT 'As Administrator'), it throws above 1st error  - "This task requires the application to have elevated permission"
    Because of the above 1st Issue, if the Visual Studio 2013 is run 'AS ADMINISTRATOR', it again throws an error (2nd error) - "Error occurred in deployment step 'Install App for SharePoint': The System Account can not perform this action"
    How to over cum this "chicken and egg problem"??
    Regards,
    developementsharepoint

    Hi, 
    Have you had a look at the TechNet guidance for configuring SharePoint and SQL on a single server? It's here: http://technet.microsoft.com/en-us/library/cc262243(v=office.15).aspx
    There is also a good TechNet wiki article on creating a SharePoint dev environment here,
    http://social.technet.microsoft.com/wiki/contents/articles/19178.sharepoint-2013-setting-up-a-dev-environment-one-piece.aspx and here http://social.technet.microsoft.com/wiki/contents/articles/15289.sharepoint-2013-creating-a-development-environment.aspx
    Regards, Matthew
    MCPD | MCITP
    My Blog
    View
    Matthew Yarlett's profile
    See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
    Upload and Crop User Profile Photos

  • Optiplex 9020, Intel 4600 + AMD video card = bluescreens and other issues for dual monitors

    Our organization purchased a number of 9020s with the onboard Intel and the AMD 8490
    Over time, many of these systems would experience video issues.  Originally they were configured with one monitor was plugged into the intel VGA and the 2nd monitor was plugged into the AMD DVI. output
    Among the issues were bluescreens.  When dragging something from one monitor to another, there would either be another bluescreen or other graphical glitches.  Despite uninstalling/reinstalling both drivers these issues would persist.  Eventually we tried moving both monitors to the Intel outputs,  issue still persisted, then we tried moving all the monitors to the AMD ports,  issue still persisted.   Eventually we removed the AMD card entirely.   That seems to have corrected the graphics issues.    That being said, I don't think the issue is faulty hardware,  about a dozen systems have exhibited this issue so I am doubting that each one of them all have faulty hardware.   I suspect a driver problem somewhere.  The Intel driver and/or the AMD driver don't seem to play well with each other.   
    This issue has persisted across both the AMD 8490 and the AMD R7 250 cards.
    Our organization is locked into certain configurations, so at present, we are unable to order PCs without the extra card.   The extra card hasn't been needed once onboard cards started gaining the ability to do multiple monitors.

    Win7 64 bit.  We haven't had the blue screen in a while so I don't have the specific message, but it did reference an AMD file.  Drivers have been uninstalled/reinstalled numerous times.
    Latest issue is that when the user steps away from the computer and the monitor goes into powersave after 30 minutes, when the user returns the monitors will turn on, but the screen stays dark.

  • Canon G10 Raw and Others fixed

    Check you software update for:
    This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
    Canon EOS 5D Mark II
    Canon PowerShot G10
    Pentax K2000/K-m
    Leaf AFi-II 6
    Leaf AFi-II 7
    Leaf Aptus-II 6
    Leaf Aptus-II 7
    Leica M8.2
    It also addresses issues related to specific cameras and overall stability.
    Happy Holidays...

    Check you software update for:
    This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
    Canon EOS 5D Mark II
    Canon PowerShot G10
    Pentax K2000/K-m
    Leaf AFi-II 6
    Leaf AFi-II 7
    Leaf Aptus-II 6
    Leaf Aptus-II 7
    Leica M8.2
    It also addresses issues related to specific cameras and overall stability.
    Happy Holidays...

  • What is the motherboard and other hardware for the Pavillion dv2700?

    I just got it from a friend who didn't know how to fix it, and I really just need to know the parts I need. Has the battery problem been resolved which was the root to this overheating?

    Hello
    You are right. WLAN card in your notebook is Intel (Golan) Intel 3945ABG and the driver can be downloaded from http://aps2.toshiba-tro.de/wlan/?page=downloads
    As I can see there is version 12.2.0.11.3 available for download.
    Download driver for Vista and with exe files extract it to some folder. Later look check this folder and go into folder Vista32Drv.
    Drivers are there and install them manually with WLAN properties > install new driver.
    Does this method works?
    What so say about BT? The latest version is the newest and you can install it on your Satellite notebook.
    What you want to do with BIOS settings exactly? some certain hardware components can be also disabled in device manager.

  • Itunes artwork display issue and a fix for  'unknown error occured (-50)'

    Too bad they dont have stickies. This would be a great one.
    This is a thorough fix for art work and the -50 error.
    If you see artwork in itunes, first verify that the artwork is in the mp3 tag using a program like "tag and rename" http://www.softdepia.com/tagrename_download1291.html
    If the artwork shows up in tag and rename, then you added it correctly.
    If the artwork isn't displaying on ipod, delete the song and retransfer to the ipod. Next make sure the "view artwork" check box is checked. To do this connect your iPod to iTunes and there will be a checkbox that should be checked to see if you want artwork to show up on your iPod.
    If you get this message -
    The ipod cannot be updated. An unknown error occured (-50).
    And have no artwork at all in you IPOD , dont fret. I am getting there..
    NO you DO NOT NEED to FORMAT YOUR IPOD YET as commonly posted. I have tested and retested the following fix-
    Eject IPOD. Kill ITUNES.
    Backup the following files
    iTunes Library.itl
    iTunes Music Library.xml
    & anything in the Previous Itunes library folder
    and delete them. More info on these at http://docs.info.apple.com/article.html?artnum=93732
    Dont worry, its much easier to recreate the database than to wipe your IPOD.
    Next Start up ITUNES. Plug in IPOD. You now should have a empty database.
    At this time, uncheck copy ARTWORK to IPOD, and when it's done deleting artwork, CHECK Copy ARTWORK to IPOD.
    It now should sucessfully display ARTWORK and not get the -50 error!!
    Now, goto you ITUNES Music folder and drag to the library and it will add you music back in, including your PODCASTS.
    All you need to do is click the RESUBSCRIBE button and you are back in business!
    IF this fails, which i cant DUPLICATE anymore, try this
    http://docs.info.apple.com/article.html?artnum=300248
    Its the DREADED IPOD FORMAT article.
    But you probably wont need it if you follow all these steps.
    Post back if this doesnt work and if it does, give me some credit;)

    Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
    Then open itunes, and it will rebuild the database with the files from the .xml file.
    This saves you from having to rescan the songs..

  • My lightroom has updated to 5.5 and I now can't use the Develop module.

    My lightroom has updated to 5.5 and I now get the message "Develop module is disabled -please renew your membershipto reactivate the Develop module". My membership is ongoing so how do I resolve?

    Adobe made a help page for this problem because so many people have it:
    https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

  • Missing music, jumbled letters and a FIX for Newsstand

    I have an iPod Touch 4. That being said, the following problems and 1 fix have been found since the 5.0 and 5.1 upgrades:
    1. Under artists in the Music App, no artist appears after the letter 'R'. (they appear and play when I search iPod)
    2. Under artists, and after the letter 'D', the artists cease to match the proper letter.
    What I've done: After cruising the forum for an answer and finding none, I restored my iPod with no success (took a long time). I've added and taken away artists and playlists. I've even thought of sacrificing some sort of small animal (joke) just to be able to get back to where I was before the last 2 updates.
    In fact, I was a little annoyed when the last update didn't fix it.
    That being said, after the 5.0 update and the appearance of Newsstand, I did everything to hide it (Sorry Conde Nast). A solution I found elsewhere was this:
    Form a NEW folder. As it is forming, slip Newsstand in. It takes a few tries but will work. However, once it is inside the new folder, NEVER open Newsstand as it will crash the ios.
    Some help would be nice, and I hope I've helped someone else with the Newsstand issue.

    Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
    Then open itunes, and it will rebuild the database with the files from the .xml file.
    This saves you from having to rescan the songs..

Maybe you are looking for