Lightroom 6 crashes everytime the app starts up
After finally realizing I had to uninstall Adobe CC, Photoshop and Lightroom in order to update to LR CC, I am no longer able to get Lightroom to run at all. The app will crash every time I try to run it. I have tried uninstalling it again, along with every other Adobe app, but the problem still persists. At this point I really have no idea what else I should do to get this to work...
Photoshop CC is running perfectly fine btw...
I'm using all of this with Windows 7 SP1 64bit.
Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.),.
Similar Messages
-
I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much
Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.
-
Firmware update 1.0 window appears everytime the MBP starts up.
After a succesfull firmware update the firmware update 1.0 windows appears everytime the MBP starts up.
It says: the firmware of the computer is updated to version 1.0.0. of the Mac Book Pro updater.
Can someone help me to let it disapear?
Thanks.No I can't help you to make it dissapear but I would like to warn other users to perhaps wait for Apple to get their act together and create a firmware update that actually works and does not break machines...
After the upgrade of my MBP 2.16GHz the wifi interface will no longer connect to my WPA Personal protected network. Before the upgrade this would work flawlessly... -
Numbers keeps crashing everytime when i start working on a worksheet
Since a few days Numbers keeps crashing when i start to work on a worksheet. And it doesn't matter if it's a template or a empty screen. I keep sending the reports to Cupertino.
I am also experiencing this problem since yesterday on two computers. I know exactly what caused the problem to start happening, because I replicated it on the second computer. Now I have to figure out how to fix it.
For the record, in case the iWork engineering team is watching:
1. I opened a Numbers document from iCloud.
2. I attempted to Duplicate that document by pressing Shift-Command-S.
3. The progress bar dialog appeared saying that it was duplicating the document, but the progress bar just got stuck. After an hour it was still there. Numbers had obviously hung.
4. I force-quit Numbers by option-control-clicking on its icon in the Dock.
5. Ever since, Numbers crashes on startup with the following message in the crash log:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[SFUDateFormat decimalPlaces]: unrecognized selector sent to instance 0x10014020'
6. I deleted all Numbers preference files from the Preferences folder. It didn't help.
7. I turned off Document & Data syncing in iCloud. It didn't help.
8. Opening the same document on another machine and repeating above caused the exact same thing to happen. It appears that there was some corruption about that document that caused Duplicate to fail. Immediately previously to this problem, I had Duplicated several other documents and saved them successfully.
The problem with Numbers is isolated to the user account I was using when I force quit the application. Numbers continues to work fine on other user accounts on the same machine.
Now I'm off to try a few solutions to get Numbers working again. -
Illustrator crashes everytime the Swatch palette is used
So my PC Illustrator CS3 version crashes everytime when a color is picked from the Swatch Palette. Any idea?
Thanks!!
NinaI would create a new user account and log into that ad see if it still happens.
BTW have you installed any fonts recently or software or update any software?
Try a new user and let us know what happens! -
When I am listening to some music in Last.fm and the screensaver starts, the aero in Firefox is gone when I come back to the pc. I am using Windows 7 32bit. I do not get a message that the flash pluggin is crashed or some other message...
== This happened ==
A few times a week
== I updated to the last version before 3.6.7I have a similar issue in that coming back from Screensaver mode Firefox freezes up and generally the computer has to be restarted to get Firefox to work again. All other programs appear to work fine (Word, Excel, etc.). Just the internet browser. I just tried this that someone posted on the web that made sense, but have not verified it yet (it will be verified either later tonight or tomorrow sometime). You might want to try it.
Go To Device Manager via your control panel
Expand USB (Universal Serial Bus) Controllers
Got to the Properties of Each USB Hub
Go to the Power Management Tab and Uncheck all options if any are checked (this essentially does not allow your computer to turn them off to save power when it wants to)
Click OK (go through each one and a few others check for any power management tabs)
Again do this for all USB Root Hubs (and ck any Generic Hubs you may have)
Reboot you computer
Hopefully it works for you and me! -
my apps are not updating when I try it starts to load then quits then i get the msg that the app cannot be downloaded at this time
Hi tmcrae
First check that your device is not full, maybe you may have to delete some photos or apps to make space to do updates. if its not full then you will have to try pluging it into your pc/mac running itunes then doing a backup and restore. Then you should be able to do your updates.
Sorry but i cant think of any other way if its showing as installed already but is not there.
Hope that helps
Delboy1066 -
I have just updated Lightroom 5 and now the app won't launch i am on an IMAC
I have been using Creative Cloud for some time and had an update notification for Lightroom 5 which I installed however the App will now not launch
Hi alwest,
Please try to perform the steps given in the following article.
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
Hope this helps.
Pleas let us know in case of any problem.
Thanks and Regards,
Sumit Singh -
Lightroom keeps crashing now the library is corrupt and cannot be used - any idea why?
Lightroom is shutting itself down almost every 20 minutes. I have re-opened it and kept working then it happens again. I have re-started the PC and that helps but their seems to be something wrong. Have around 4000 photos in folders and then sub-folders. Any ideas? Have a two day old back-up that I can start using again on though I would love a way to restore / repair the corrupt version, which is held in a "CorruptDBs" folder.
Have been using Lightroom on a laptop for months without issue, now I have it on new PC, and this problem arises though only since the large number of images were imported (approx 4000).
Any suggestions welcomeI can't say why LR is crashing off hand, but I may be able to help out with the corrupt database:
Victor Spång Arthursson, "export and import ratings etc? Database corrupt but openable" #8, 10 Apr 2007 5:52 am
DT -
How do I get a copy of the Lion installer, which I previously purchased? My drive crashed and I am trung to rebuild it.
See if this helps:
Mac App Store- Hiding and unhiding purchases -
CS6 Programs unstable Frequent crashes in the Apps
Just purchased the Creative Cloud subscription and unless I run all the programs in Admin mode I get ferquent crashes.
Dynamic Link does not work in Premiere and I cannot even import a PSD file into Premiere unless I start the program in Admin mode.
Is their a fix?
eg When importing a PSD file into Premiere I get " Adobe Media Core CS6 has stopped working" "APPCRASH PhotoshopServer.exe "
When sending a Premiere Sequence to Encore using Dynamic Link "Adobe Encore has stopped working" "APPCRASH Encore.exe"
Never had these issues with CS5 Master Suite.
Message was edited by: Roy HesseyAs I said earlier such issues come up because of permissions , may be your CS5 files and folders have the correct permission however CS6 files and folders don't.
As you have Windows 7 , you may try to uninstall your CS6 , log in with the Hidden Admin account and then install the software.
To know the steps to unhide the hidden admin account check this link :- http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/
Once you have installed the software in Admin account , login back in your normal standard account and then check. -
So grateful for any help to fix this.
Thanks for your reply. I was able to find help through a tech support chat session and the person helped me edit my /etc/hosts file and it solved the problem.
For anyone else experiencing this issue (Mac OS X):
Close all other programs and sign out from the Adobe Desktop App
From the Finder, Go > Go to Folder...
Type /etc and hit enter
Find "hosts" file (only "hosts", there were similar files such as hosts.config but only open the one that says "hosts"
Open the file, and replace the entire content with ### Host Database## localhost is used to configure the loopback interface#
Close the file, sign back into the Adobe Desktop App
Problem solved! -
why is lightroom shutting down by it self while i<m noting my picture and it do it 10 time in 5 min even if i shut down and restart computer
why is lightroom shutting down by it self while i<m noting my picture and it do it 10 time in 5 min even if i shut down and restart computer
-
My iPhone has recently been crashing (or rather the apps) when I would try to access my text messages, contacts, phonebook, facebook, or email. I tried restarting my phone and lost all of my contacts. This has been happening more and more frequently. Today I was in my pictures and was trying to crop one and my phone shut off completely. Anyone know what's wrong with it or how to fix it?
Make sure all apps are fully closed:
- double tap your home button
- hold your finger on an app
- when the apps start to wiggle press the red "-" button on all the apps
Now do a hard reset:
- hold the home button and the sleeps/wake button down at the same time
- the phone will shut off then when the apple logo ppears release both buttons
If by then your contacts have not been restored you would need to try and retreive them from a back up on itunes/icloud that was made when the contacts were on the phone. You could even stream them from the cloud if they were synced to the cloud. The link beow will show you how to restore from an itunes/icloud back up:
http://support.apple.com/kb/ht1766
Also to prevent this issue which i have seen alot when users are still running iOS 5 it would be best to update the iOS on your phone. To do this follow the link below:
http://support.apple.com/kb/ht4623
Hope this helps -
Any fix for the Apple podcast app starting to play after a missed phone call?
I have the apple podcast app and every time i receive a missed call, after the call the audio from the app starts playing. I have an iphone 4 with ios 6.
Thanks.I'd also like to see a fix.
Maybe you are looking for
-
Is there any impact that apply Oracle CPU on standby and primary DB
We plan to apply Oracle April CPU on standby DB at this weekend. Then apply the same patch on primary DB next weekend. If I apply the patch on standby, then enable redo apply between primary and standby, is there any impact on primary DB. Theoretical
-
Junit : How can I get the method name (say testMyAddress) that failed
My code is below TestSuite masterSuite = new TestSuite(testClass); TestResult result = new TestResult(); masterSuite.run(result); Enumeration errors = result.errors(); while (errors.hasMoreE
-
Transporting a PC with new Infopackages
Hello Every One, I am in the process of creating a lengthy process chain in D system. In the course of development, I am forced to create/modify the delta Infopackages and also variants. But in my Quality System, these infopckages and variants are no
-
Scanning but not printing with Lexmark P3120 on OS X 10.4.11
Hi all, Im having some trouble to set up my Lexmark printer on my MacBook (OS X 10.4.11). Its a USB printer and Ive downloaded the most recent drivers from Lexmarks site, the scanner feature works fine, but cant really print... Keeps on saying "Print
-
Why isn't Time Capsule showing up in Disk Utility?
I'm trying to move a Time Machine backup from an external HD to a .5TB Time Capsule [2008]. I've researched and researched and tried it all. First, I tried dragging the backups.backupdb to the Time Machine folder as advised in several places. Got the