Lightroom 6 Develop Module does not show photos, Library Module does show photos
This is what I see in the Develop module after installing Lightroom 6. Lightroom 5 runs fine on the same Laptop. Is this a GPU issue? Configuration issue? End user issue? I'm running a Lenovo T430 with Windows 7 Enterprise 64BIT. I purchased and installed LR 6.0 22-April-15.
I too have the same problem in lightroom CC as you ( after updating on 30/4/15 ) and have looked all over the internet. I had read something in the Adobe forum site suggesting a problem with the Graphics Processor, but it was not specific to our problem in lightroom. When I also checked photoshop ACR, it too showed the same as your screen shot. And all worked OK in lightroom 5 and photoshop 2014. It did not seem to make any sense at all ! I haven't unchecked " use Graphics Processor" option, but I will soon after I reply to you and had a rest after hours of trawling through internet sites looking for the answer. I use win 7 home premium desktop 64 bit on a 1 year old PC.
Thank you GrandpaCamera for your contribution, and a picture is better then a thousand words. By Michael.
Similar Messages
-
Develop module changes not reflected in Library module or on export.
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR??
That's very odd indeed! Let me just clarify this...
You select a photo, switch to Develop, change it to B&W to make it REALLY obvious. Then you switch back to Library and the photo is back to colour again? What happens if you zoom into 1:1 in Library?
And then you export with the format set to JPEG (not 'original') and the result is colour? -
I successfully synched photos from my mac book iphoto to my new iphone 5 (icloud did not do the job). Now these photos appear on my phone in three places--iphoto app, last import, and photo library. Does that mean that they take up three times the memory? Will that affect iCloud? Sorry for the end-user questions!!
HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated. -
Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.
Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.
-
Quick Slideshow not working in Library Module
Quick Slideshow <Ctrl + Enter> does not run in Library Mode? The Module tips in the Slideroom module state that it does,but I can not get it to run. I use this all the time as a first step to edit. Windows Vista 32 bit. Thanks
It's a bug, we've got that one, thanks
-
Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked
I have just purchased CS4 with Bridge for my new MacIntosh. In Bridge for the PC, when I double click a photo it automatically brings up Photoshop. On the Mac version, it gives me an error message saying that part of the application is not loaded. I completely uninstalled the program, and reloaded the application and still get the same message. So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries: "Open with CS4 (default)" and "Open with CS4." This works if I pick either option. My Windows version only has "Open with CS4 (default)" as the option.
I called Adobe support (in India?) with no solution.
I really like the double click option rather that using the pop-out menu choice. What is wrong with the Mac install, and how can I fix this issue?Thank you for your help. I updated the software and it "healed" itself.
Best regards,
Gregory T. Stramat
[email protected]
801-978-4735 (Office - Preferred)
801-652-0775 (Mobile)
Omke Oudeman <[email protected]>
01/22/2010 12:52 AM
Please respond to
[email protected]
To
Gregory Stramat <[email protected]>
cc
Subject
Bridge Does Not Automatically Bring Up Photoshop When
the Photo is Double-Clicked
This might mean that you have either 2 installs of CS4 (one on an other
disk?) or you did not use the the default application folder on root level
but have it installed in the user account application folder. Could you
check this?
and go to "Open With" and there are two entries: -
MBean Attribute (Does not apply to application modules)
Can any one tell what this mean ?
MBean Attribute (Does not apply to application modules) :
is this means that it wont help for datasources for any J2EE application ????
Inactive Connection Timeout
The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
When set to 0, the feature is disabled.
MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
Minimum value: 0
Maximum value: 2147483647Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
Below is the brief information about it:
A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
Runtime MBeans, which provide information about the runtime state of its resources.
New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
Deprecated MBeans, which are deprecated in the current release of WebLogic Server. -
Work order to cost center settlement does not post to GL module (FI)
Dear Expert,
I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
Please advice.
Thank you.
KHHi Kiran,
The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
Change the cost center from period in the past date and try.
BR, Srinivas Salpala -
Nvidia module does not exist in /proc/modules
Hi!
I compiled kernel with grsecurity from AUR. everything goes fine, and my system boot with a new kernel.
Only thing i have a problem with, is nvidia module.
I'm tried to makepkg nvidia with ABS way, but i get errors:
ERROR: Module nvidia does not exist in /proc/modules
In order to use the new nvidia module, exit Xserver and unload it manualy.
I"m trying to do:
modprobe nvidia
but i get:
FATAL: Error inserting nvidia (/lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko): Cannot allocate memory
When i write :find /lib/modules -name nvidia.ko
I get: lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko
When i write: uname -r
I get: 2.6.32-grsec-ARCH
Any help please..you have to reboot after installing nvidia because the > 2.6.34 kernel has nouveau and is using the card.
-
Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.
Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay -
in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'. Any suggestions?
Been having the same problems all week. And am got a generic, not-at-all-helpful response from my initial inquiry with support, then absolutely no response to my follow-up requests. There seem to be a fair number of people posting this problem, so not sure why we're being ignored.
Was able to eventually download the episodes manually via the 'purchased' link, but it's about 10 more steps than normal.
Also noticed that itunes isn't recognizing my purchases at all, not just season passes. If I go to a page of a show where I buy episodes individually, it doesn't show which episodes I have previously bought like it used to. -
Is it true that iPhone 4s does not allow to take more than 1000 photos?
Hi!
Is it true that iPhone 4s does not allow to take more than 1000 photos?
http://dolboeb.livejournal.com/2299939.htmlNot true.
Only Photostream is allowed to take a max of 1000 photos, then they will be removed from server/icloud. -
Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim
Download it directly from Apple and apply;
Digital Camera RAW Compatibility 6.02 -
I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!
If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader. -
My husband wiped out the library on his itunes account and replaced it with mine. Any ideas on how to get it back? Our laptop does not have his library either. only mine.
How exactly did this happen? Were you using separate iTunes libraries on separate user accounts on the laptop?
B-rock
Maybe you are looking for
-
How do i make the tabs attach on bottom (the "page") instead of hanging from the top (the URL bar).
Last time i restarted FF, the tabs, which are under the URL bar, are "hanging from" the URL bar, with a space under the tabs before the page starts. I want it attached on bottom, with the space on top of the tabs. I do not know if this is an option,
-
I have been allocated a new PC. Where is the date format used by forms (6i) set up. I previously used to enter 20110519 in my applications and the application and it used to accept. It now does not accept the above format. Requires 'DD-MON-YYYY'. The
-
Mausklick bei usb maus funktioniert nicht immer
Problem: Wenn ich eine externe USB-Maus an meinem MacBook anschließe und nutze kommt es oft zu dem Problem, dass ich zwar klicke aber nichts passiert. Beim zweiten (oder manchmal auch dritten klick) geht es dann erst. Ich bilde mir ein, dass das Prob
-
How do i downgrade iphone 5 running 7.0.3 to 6.1.4
k
-
SPD worflow -- hyperlink in a workflow variable
Hi, In SPD, is it possible to add a hyperlink in a variable in the action "Set Workflow Variable"? Thanks in advance.