Lightroom 6, Modul Diashow stürzt ständig ab

Ich versuche seit zwei Tagen eine Diashow zu speichen uns abzuspilen. Lightromm 6 hängt sich dabei auf und es kommt die Windowsmeldung, das Programm funktioniert nicht mehr, sie werden informiert wenn eine Lösung des Problems gefunden wurde.
Bin ich der Einzige bei dem dieses Modul nicht funktioniert?

Similar Messages

Lightroom CC stürzt ständig ab

Habe Lightroom CC aus der Cloud installiert. Programm komplett unbrauchbar, da es ständig und unabhängig der Arbeitsschritte abstürzt. Lightroom 5 funktionierte tadellos. Jemand ähnliche Probleme und ggf. eine Lösung? Danke.

Hallo Herr Dörsch,
Leider nein.
Auch die aktualisierte Version stürzt nach kurzer Zeit (v. a. beim Klick von einem Bild auf das Nächste im Entwicklermodus) ab.
Ich nutze Lightroom beruflich und habe momentan keine Zeit für etwaige Experimente wie z.B. dem Anlegen neuer Nutzer o.ä.
Also arbeite ich weiter mit LR 5 und muss mit dieser Enttäuschung offenbar leben.
Zusätzlich erweckt eine solche Version Misstrauen ggü. allen anderen updates auch der anderen Programme.
Wenn ein Programm via Adobe-Cloud veröffentlicht wird, erwarte ich als Abo-Kunde, dass dieses sofort und ohne Probleme
auf meiner Plattform läuft! Sonst machte dieser "Plug&Play-Dienst" keinen Sinn.
Sollte ein neues Programm ganz spezifische Anforderungen an Prozessor, Garfikkarte etc. stellen, sollten diese deutlich im Vorfeld
spezifiziert werden, bevor man sich einen solchen Flop einhandelt.
In meinem Fall (s. o. in dieser Kommunikation) konnte mir noch niemand einen Punkt in meiner Rechnerkonstellation nennen,
der die Instabilität des LRCC begründen würde.
Mit schönen Grüßen, M. Abele
Am 04.05.2015 um 20:30 schrieb martindoersch <[email protected]>:
Lightroom CC stürzt ständig ab
created by martindoersch <https://forums.adobe.com/people/martindoersch> in Deutsche Foren - View the full discussion <https://forums.adobe.com/message/7511115#7511115>
Wie schaut es aus, wenn Sie einen neuen Benutzer <http://www.appletutorials.de/mac-os/benutzer-unter-mac-os-x-anlegen.html> auf ihrem Mac anlegen (nur für Testzwecke) und darin dann Lightroom installieren?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7511115#7511115 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7511115#7511115
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Deutsche Foren by email <mailto:[email protected]ed.jivesoftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=20 14>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Lightroom web module

Re "Lightroom Web Module"
In the "site info" panel, I type the word "exit"
In the "web or mail link" section, I copy and paste the web page address of the page on my site
I wish it to be directed to.
I preview this with the Lightroom "Preview in Browser" button.
All works perfectly well including the exit link.
I then export it into my website "local file".
Create a link from text on my web page to the lightroom created gallery (I'm using Dreamweaver)
Then save changes in Dreamweaver and click preview in browser.
The Gallery works fine with the exception of the exit link.
I have the same problem in the Web HTML Gallery
I have also downloaded Lightroom 3.6 from Adobe labs and had the same result.
Any Suggestions
Many thanks...David

Hi Pete. Thanks for your reply.
Tried replacing exit with home without any results
Doubbled checked the link address was correct in lightroom...it was.
Just tried something I had not tried before. Up untill now, I was using only the "preview in browser" in
Dreamweaver.
When I uploaded the gallery to the remote server and went to see if it worked on my site it did !!!!
Not sure why it won't work in the "preview in browser" in dreamweaver but.....a question for bigger brains than mine..
Many Thanks for your help
Dave

Image Info setting in Lightroom Web Module

I watched the Turning Gate Podcast on how to customize the text used for photo titles, captions and other items in Lightrooms web module.
In the Podcast pictures I noticed that in the web module Image Info pane section there are four individual settings available: Title, Caption, Annotations and a fourth one which I could not read.
In my version of Lightroom (Version 1.3) I have only Caption and Title available (displayed). How do I get the others displayed?
Franz

Brent,
On the left hand side double click on hard drive under "Publish Services" then do the following
In the Publish Services panel on the left side of the Library module, click the Adobe Revel connection Set Up button.
In the Lightroom Publishing Manager dialog box, look under Account and click Authorize.
Follow the prompts to allow Adobe Revel to communicate with Lightroom.
I played around with it to figure out different features of publishing Lightroom to Revel.
Once you have it set up then can create a new collection/abum by control clicking on the Adobe Revel. Then you can add image from your hard drive by dragging and dropping them into an album.
Then select "Publish" when you are done. Log in to your Revel account and check to make sure the images show up.
You can add watermarks to the images if you like.
Let me know if you have any other questions
Thanks
Scott

Unnecessary page limit for Blurb book in Lightroom Book module

I'm posting this per Julieanne Kost's request following an email exchange regarding this topic. I am in the process of making a photobook using Lightroom and discovered when I reached page 240 that I couldn't add any additional pages, much to my surprise. I was surprised because I knew from Blurb's website that the limit for standard paper is 440 pages and mistakenly assumed that this limit would also apply within Lightroom. I did more research online and found many others being surprised by this limitation after spending hours and days on a photo book. I will likely work around this by exporting from Lightroom to .jpg and uploading to Blurb, but that will take extra time and effort and reduces the appeal of using Lightroom to create a Blurb book. I had also tried exporting from Lightroom to .pdf only to find that the .pdf format exported by Lightroom is not compatible with the requirements of Blurb.
My recommendation in the short term would be for Adobe to warn Lightroom Book Module users up front that Lightroom's page limits differ from those if going directly through the Blurb website.
My recommendation in the longer term would be for the Adobe engineers to make whatever changes are necessary in the Lightroom code to allow for 440 pages when standard paper is selected (and more specifically to make the page limits match the limits of Blurb's actual books). If there is any way to impress upon Adobe management the importance of this, I believe it would be greatly appreciated by many Lightroom/Blurb users.

I agree with that (though a 330 page Blurb book would break the bank :-)
I would also like to see the LR book module allow at least all the same Cover Templates as Booksmart does - I feel really constrained with both of them but much more so with LR...At least let us Drop a Full bleed finished cover on to the front and back covers!
Lately, I do all the page making in PS, move to LR to manage the page numbering and then export to jpg and ingest to Blurb to make my books...pretty kludgy, isn't it?

My preview panel in lightroom book module has no "create save book button". Where is it?

My preview panel in lightroom book module has no "create save book button". Where is it? Is there a workaround to save my book?

The \ key will hide and show the header bar in the book module and the Create Saved Book button is at the right of that header bar.
The outlined area is what shows and hides when the \ key is pressed. Maybe you have a keyboard that has a different key for \? On my keyboard the \ key is just above the Enter key.
You can also use the View / Show Header Bar in the LR menus across the top:
If this doesn't work, then can you provide a screenshot of your LR book module?

When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

I think I've solved my problem with a Google Search. I came across a free slide show generator
(contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
I'm used to seeing.
I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
before.
http://blyt.net/phxslides/
Message was edited by: Jimbo2001

Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

Jeannine,
If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
Location of LR Preset folder in Windows Vista/ Windows 7
C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
Hope this helps a bit,
Glenn

Question regarding using Lightroom Web Module and Zenfolio

I use LR3 and like the galleries I can make in the Web Module. If I use Zenfolio as a web hosting service, can I upload or export my photos from LR to Zenfolio and use the galleries I create in the Lightroom Web Module,,,or do I need to use the existing gallery templates in Zenfolio? If that is the case, other than using Lightroom to upload photos, is it's Web Gallery Module superflous?
Thanks,
Matthew Kraus

Matthew,
If you are asking if you need to use LR's Web Module to export images to Zenfolio, then no you would not use the LR Web Module but rather use a plug-in to export directly to Zenfolio. Or you can just export to your local HDD and use Zenfolio's upload module to grab the files from your local drive.
Jeffery Friedl has a nice LR plug-in for SmugMug so I am sure his Zenfolio plug-in will work nicely as well:
http://regex.info/blog/lightroom-goodies/zenfolio
It's free, sort of, after the trial period, like 45-days as I recall, there is a limit on the number of files which can be uploaded. When the trial expires if ya like it you just donate any amount and get to upload any number of files as Zenfolio allows in a session.
Does that help answer your question?

Stürzt ständig ab

hallo zusammen,
photoshop express stürzt ständig ab.
habe die neuste version.
meine androidversion lautet 4.0.4 / Die Samsung Modellnummer lautet GT-P7501
könnt ihr mir helfen.
gruß
Johannes

Hi, ist leider ein bekanntes Problem bei 64bit Geräten (Air und 5s). Scheint was mit damit zu tun zu haben, dass diese auch "nur" 1 GB RAM haben aber 64bit Software halt mehr Speicher frisst.
Javascript ausschalten scheint die Situation zu verbessern.
Gruß

Distiller DC stürzt ständig ab

Hallo!
Heute habe ich, nach Hinweis durch den Adobe Updater, das neue „Acrobat DC“ installiert (Update von vorheriger Acrobat-Version). Dabei wird auch der PDF-Druckertreiber (Distiller) erneuert. Seitdem stürzt er ständig ab (siehe Screenshot). Damit ist es unmöglich, den Acrobat Drucker zu benutzen. (Der Export aus Indesign CC 2014 ist davon unberührt.)
Der Screenshot lässt erkennen,dass der Absturz offenbar beim Einlesen der Schriftarten auftritt, und zwar nach dem Einlesen der Schnitte des Fonts „Tinos“. Probehalber hatte ich alle Schnitte davon entfernt. Folge: Dann trat der Absturz beim nächsten Font (Times New Roman) auf. Offenbar ist das abhängig von der Anzahl; der Absturz scheint nach dem Einlesen einer bestimmten Anzahl von Fontdateien zu erfolgen.
Außerdem habe ich probiert, Acrobat DC über die CC-Desktop-App komplett zu deinstallieren. Darauf folgte eine Registry-Bereinigung mit dem „CCleaner“, ein Neustart des Systems und die Neuinstallation von Acrobat DC aus der CC-App heraus. Erwartungsgemäß blieb der Fehler bestehen, aber so kann wenigstens eine unsaubere Installation ausgeschlossen werden.
Ich vermute, hier muss Adobe den Distiller nachbessern. Hat noch jemand anders ähnliche Erfahrungen nach dem Update auf Acrobat DC?
Mein Betriebssystem ist Windows 8.1 64 bit. Alle Windows-Updates bis heute (12.04.2015) sind eingepflegt.
Um jetzt überhaupt einen PDF-Drucker zu haben, habe ich „Free PDF XP“ zusätzlich installiert. Dieser funktioniert problemlos. Gleichfalls funktioniert der PDF-Export aus Indesign unabhängig vom Distiller-Absturz.
Für Rückmeldungen bzw. weitere Lösungsansätze vorab vielen Dank!

Guten Morgen!
Ich habe zumindest für meinen PC die Ursache gefunden: Der Absturz von Distiller DC wurde von einer bestimmten Schriftart produziert, und zwar „TomaszSkowronski.ttf“. Das ist eine freie Handschrifart, downloadbar z.B. hier: Tomasz Skowronski Schriftart | dafont.com . Der im Fonts-Ordner angezeigte Name der Schriftart ist „Tomasz Skowroński“, enthält mit dem ń also ein polnisches Sonderzeichen. Es könnte sein, dass dieses Zeichen im Screenname den Absturz verursacht, wenn der Distiller DC mit solchen Sonderzeichen nicht zurecht kommt. Ein Umbenennen der TTF-Datei hilft da nichts – dies ist der Fontname, den der Designer innerhalb der Fontdatei festgelegt hat. Den kann man nur mit einem Fonteditor bearbeiten.
Zu dieser Lösung geführt hatte gestern Abend dieser Thread, auf den mich Adobe in einem Tweet verwies: distiller stopped working .Es zeigte sich, dass der Absturz immer an einer bestimmten Stelle auftrat, egal, wie viele Schriftarten vor oder hinter der Absturzstelle ich temporär deinstallierte. Zielführend war hier, die im Alphabet auf die Absturzstelle folgende Schriftart zu deinstallieren. Wie im Screenshot ganz oben erkennbar, erfolgte der Absturz bei mir immer nach dem Scannen der Schriftart „Tinos“. Die bei mir darauf folgende Schriftart ist „Tomasz Skowroński“.
Zum Testen sollte man den entsprechenden Font erst einmal von Windows-Schriftarten-Ordner in einen temporären Ordner kopieren und dann aus dem Windows-Schriftartenordner löschen. Bei mir stürzte anschließend der Distiller DC nicht mehr ab.
Ich probierte anschließend, den Font „Tomasz Skowroński“ per Verknüpfung zu installieren, sodass die TTF-Datei selbst in einem Ordner liegt, den der Distiller DC beim Start nicht scannt. Das half aber auch nichts; offenbar reicht das Finden der Verknüpfung im Windows-Schriftartenordner, um den Absturz des Distiller DC auszulösen.
Es hilft also erst einmal nur, auf die auslösende Schriftart komplett zu verzichten, möchte man den Distiller DC nutzen. In meinem Fall wird „Tomasz Skowroński“ aber für ein Indesign-Projekt benötigt. Damit bestehen die beiden Optionen: Entweder die Schriftart in dem Projekt durch ähnliche (mit Distiller DC arbeitende) Schriftart zu ersetzen oder aber auf den Distiller zu verzichten. Um aus Indesign CC heraus ein PDF zu erzeugen, benötigt man den Distiller nicht.
Da das Problem mit dem Distiller XI nicht auftrat, sollte auf längere Sicht Adobe den Bug entfernen, der in der neuen Version für den Absturz mit bestimmten Schriftarten sorgt.
Gruß
Diego

Why Does Lightroom Web Module Export Images At 240 ppi?

Firstly, please forgive my ignorance on this subject. I am in the process of getting together a website of my images and have been experimenting with preparing the images and thumbnails through Lightroom's web module. I've noticed that when opening the finished images in Elements, that they have all been converted at 240ppi. Surely, images for websites should be at 72ppi (or possibly 96ppi)? Or am I dimmer than even I thought?

should I simply ignore the resolution box?
Yes indeed. You set the size unit box in the export dialog simply to pixels and then size the right number of pixels for your web use. Typical is for example 800 pixels on the long end. The resolution box is not relevant for web use. It is really only used as a hint to a final printing size.
So I imagine the 240ppi conversion must be the Lightroom default value. Do you think?
Very likely so. I believe Lightroom, just like Photoshop, assumes 240 for files that do not start out having the tag so that is probably what happened if this started as a scan. Many scanners do not write this tag at all, but most DSLRs write the tag into their files and it is usually 240 for older generation cameras and 300 for later ones. I don't know why they do that as it is again not relevant as people print at any size they want.

Can Revel be installed in Lightroom Web module?

and how?

Brent,
On the left hand side double click on hard drive under "Publish Services" then do the following
In the Publish Services panel on the left side of the Library module, click the Adobe Revel connection Set Up button.
In the Lightroom Publishing Manager dialog box, look under Account and click Authorize.
Follow the prompts to allow Adobe Revel to communicate with Lightroom.
I played around with it to figure out different features of publishing Lightroom to Revel.
Once you have it set up then can create a new collection/abum by control clicking on the Adobe Revel. Then you can add image from your hard drive by dragging and dropping them into an album.
Then select "Publish" when you are done. Log in to your Revel account and check to make sure the images show up.
You can add watermarks to the images if you like.
Let me know if you have any other questions
Thanks
Scott

Lightroom - print module not working on mac osx 10.5.1 (leopard)

When I switch to print module in light room comes up as error when changing modules but every every other module seems to work fine.

Jao, I tried it but no luck. As John recommended, I also uninstalled Lightroom, deleted the preference file as well as the print templates per your suggestion and reinstalled the latest Lightroom 1.3.1. Still no luck with using the left panel in the Library module.
One thing I just noticed was that if I open a very small catalog of ~200 images, everything appears to work fine. It looks like a problem with working with my 12,000 image catalog which always worked well before I upgraded my iMac to OS X Leopard. By the way, I've got the preferences setup to always check the integrity of the catalog at the start of every session. Everything is supposedly good.
Anyhow, thoughts and recommendations would be greatly appreciated. I hate the thought of reimporting all my images and losing all my metadata in the process. Thanks.

Adobe lightroom 2 module error

I just installed Adobe Photoshop Lightroom 2, but when I start the application an error comes up " an error occured when attempting to change modules". I am new to the mac so i am at a loss on what to do to fix this. I have removed the program and it .plist file but the error still comes up when i install it again. I loved this program when I used XP so I want to continue this program. Any help will great.
thanks

That would be a problem for Adobe's forums. I've never seen it before personally.

Lightroom 6, Modul Diashow stürzt ständig ab

Similar Messages

Maybe you are looking for