Lightroom bug with GPS in raw files with XMP

I'm quite sure I've stumbled upon a bug in Lightroom.  I look in my XMP file and I see my GPS info:
   38,53,25118N
   77,1,90390W
But in lightroom, it loads the coordinates as:
+58° 52' 25.00", -82° 14' 53.00"
Now I was thinking something was just wrong in the XMP file, so I load the same image in Bridge and I see the correct GPS information.  So I know it's a problem with Lightroom.
I searched the forums and haven't found anyone else reporting this bug.  So now I'm kind of stuck.  Can anyone confirm or deny this behavior?  I'm processing hundreds of images from my last vacation and I am really stuck here because I can't continue until this is fixed and the chances of it getting fixed any time soon seem pretty slim.

After hours of painfully trying everything imagineable, here is what the problem is:
I downloaded the images to my PC using Downloader Pro (Breeze Systems) and initially viewed them with Bridge. Using a Windows XP in French. Apparently Downloader Pro used a comma instead of a period. Bridge understands it this way, as it's just a separator. However LR does not.
To fix it, I had to delete all my images from the library, then by hand modify each XMP and change the comma to a period. Then reimport into LR. I tested this on a few images and it works. Now I'm off to do the rest of the photos of my trip.
I'll report this to Breeze Systems as well, as I think it actually originates on their end. It'd be nice if LR could still read it like Bridge does. It seems LR is more strict and that's the problem. This could be considered a bug by LR as well since instead of ignoring the GPS coordinates or giving an error message, LR seems to calculate it and ends up being way off. For example, I was shooting in washington and all my photos showed up as being in North Dakota, Canada, South Dakota, etc.

Similar Messages

  • Lightroom changes colour in my RAW files captured with NIKON D300

    Dear All! Lightroom changes colour in my RAW files captured with NIKON D300. Some of the images are completely ruined. I am sure Adobe must be aware of this problem. What could be done? Is there a solution? Many thanks for your help. Regards, Stanislav

    You want "something different" but this "something different" is quite hard to define.
    I want a result which reflects the result on the camera. Have the feeling the display
    of the D800 is not the greatest, at least (not only the color issue which is often discussed)
    but also the exposure. Often I think I would need to compensate it, but then afterwards
    on the computer the non corrected version looks most of the time better.
    I think its interesting to see how allergic people react when the word jpeg comes up.
    This is also just a rendered result, just by the camera. There are many options in my cam.
    I like the vivid setting with some modifications. And that gives me a result I like.
    And if I like the result, why shall I spend way more time to replicate it?
    I do not talk about that I would want the jpeg, I only say that what I get color wise out of the
    box is how I would like to look at it. I still want the capability to fix for example exposure  in image,
    but I want the base the version I got from the jpeg view (or how the Nikon raw software could do).
    On Lightroom I did not manage to have a profile that looked as appealing to me.
    It also consumes way more time in my workflow to fix all pictures manually and results might differ.
    To work on an image you need a starting point, I do not say the jpeg look is always perfect and
    what I want all the time, but most of the time it is.
    You say yourself you use profiles. So why should there not be a profile which automatically adjusts to the camera settings.
    Its so frustrating to see a look which you like (the preview image when the pic is first accessed) and
    then Lightroom switches to its own rendering which is flat and which I do not like.
    For me its clearly something Adobe and/or Nikon should fix, like the mentioned "auto correct to preview look",
    Nikon profiles/settings/raw-details in Lightroom or for example a Nikon import module.

  • Camera Raw 4.4.1 has bug with Canon 40D raw files

    I shoot with the Canon 20D, 30D, 40D, 1DMII, and the Rebel XTI. The Raw processor is showing an anomaly only with the 40D files. When I load raw images, and when the image is displayed, it is shown at one setting. Then in 3 seconds, its updated again at about 1/2 stop brighter. Each time I click on another image on the left column, same thing. The new image is displayed, then 3 seconds later, updated at about 1/2 stop brighter. THe histogram reflects the changes showing the data moving to the right. This only happens with the 40D raw files.
    Whats up?
    It happens regardless if "Auto" or "Default" is selected. I use "default" as a norm, never letting PS do an auto correction.
    How do I stop Camera Raw from doing the second update? This has to stop.
    ...Doug

    Thanks John,
    Now moved to ACR -
    http://www.adobeforums.com/webx/.3bb6a85c.59b53a49

  • Ability to process several raw files with the same content but with different exposure into the single picture

    Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
    Base raw files can be given with exposure bracketing during shooting, for example.
    The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
    The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
    Thank you

    The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

  • I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    Close and restart Photoshop if you have not already done so.
    In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw.  What version does it say there?
    -Noel

  • I can't open Sony NEX-5 raw files with PS-CS6 and latest raw converter plug-in 7.1.

    When I try to open raw files from Sony NEX-5 instead of going to PhotoShop like all my NEF files, they go to another software suite that I have (On-One).  I am running MAC OS 10.7.5 with latest PS-CS6 and latest raw converter plug-in 7.1.  On-One seems to hi-jack these Sony raw files and won't give me the opportunity for the adjustments that I get with the Adobe Raw File converter.  Any help??

    Great news!
    Since you have the solution, you might want to see this article: http://forums.adobe.com/thread/1058744?tstart=0
    Marking your thread as Answered will be helpful to many.
    Good luck,
    Hunt

  • Issues opening RAW files with CS2...

    I find if a bit complicated to open RAW files with Photoshop CS2 in iPhoto 08 (I'm using OS X 10.5). Currently the only way I've been able to do this is do a search for the file name in the finder, at the bottom of the Finder window, in the path, double click on the folder that the RAW files are in (user/my name/pictures/iphoto library/originals/2007/RAW files), then highlight the NEF files (the cameras a Nikon D200) I want to open, hit command/O then Photoshop CS2 opens the files in the RAW converter. If I try this from CS2 (command/O) the path goes as for as iphoto library (user/my name/pictures/iphoto library), at this point the iphoto library icon is ghosted out and can not be opened. If I drag and drop the image from iPhoto to the CS2 icon in the dock it opens as a jpg not the RAW file I need. If I try clicking my way to the folder from the left side of the finder, my name/pictures/iphoto library this is as far as I can go. There's something strange going on here. How can you go to a folder only one way and not the others? There seems to "hidden" folders now.
    So... My question (finally), how can I simply open RAW files from iPhoto 08 in CS2?

    In iPhoto's Advanced preferences select the checkbox under RAW Photos: "Use RAW when using external editor". That will open the Cr2 file in the raw editor. To get the edit to show in iPhoto you'll need to click on the Open Image button so the jpg version is created with the edits you made to the RAW file. Then when you save you'll need to navigate in the Save window to the Modified folder and save it into the folder representing the event that the original is in. It's not easy. I've not done much with RAW, just a few tests, so there may be an easier way to get iPhoto to recognize the edited version.
    If you don't use the Open File and close iPhoto won't display the edits you made to the RAW file.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Looking for answers on XMP files - where should they be stored as sidecar files?  With the original raw file or in a separate folder?

    Looking for answers on XMP files - where should they be stored as sidecar files?  With the original raw file or in a separate folder?
    Relatively new user of Adobe LR5 and PS CC, about a year old. 
    If they should be stored somewhere beside the folder that contains the originals, where and how to change the settings?
    If I choose to write metadata to the original files, is that sidecar files or does the XMP file show separately?
    To be honest, I usually find a video and I cannot figure this out.  I have never received an answer on any of my questions by the way. 

    Hi there,
    You answered a prior question from me so I wanted to reach out to you about this.   I just need a step by step on how, if possible, to View LRCC on my MacBookPro when the main interface is on my iMac

  • When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

    When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

    FCE can use DV or AIC video formats natively.  Any other format will need to be converted to one of those two if you want to avoid constant rendering.  The clips you use must match the Sequence settings.
    -DH

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
    The DNG Converter can be found, here:
    http://www.adobe.com/downloads/updates.html

  • "Use RAW files with external editor" greyed out for Photoshop CS2?

    I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
    It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
    Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
    15" PowerBook G4   Mac OS X (10.4.4)  

    Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
    You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

  • Hi, I have a version of CS4 on my Mac.  I can not longer open Raw files with it from my Canon 5D.   I never had problems with it in the past.  What can I do?

    Hi, I have a version of CS4 on my Mac.  I can not longer open Raw files with it from my Canon 5D.   I never had problems with it in the past.  What can I do?

    is that the eos 5d?
    if so, you only need cr 3.3 or greater.  what version do you have in your cs4? (help>about plugins>camera raw)
    if you need to update it, http://www.adobe.com/downloads/updates/

  • Importing RAW files with keywords from Bridge

    Hi everyone,
    I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
    The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
    I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
    Why does this not work for RAW files? What do I have to do in order to get it to work?
    Thanks in advance for your advise
    /David

    When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
    Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
    There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
    Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
    Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
    Perhaps someone else will explain this better than I.

  • Opening Canon 6D .CR2 raw files with CS5 Extended

    Can't open Canon EOS 6D raw files with CS5. What is the minimum I need to do to open Canon  EOS 6D .CR2 raw files in Photoshop CS5 Extended version 12.1 x64, and Brige CS5 version 4.1.0.54, and Camera Raw version 6.7.0.339? I would rather not have to go through the hassle of first converting all files with the Adobe DNG - is there another option? Can I upgrade my Adobe software?

    Im having the same problem, and i use CS6
    Do you know if CC can open 6D .CR2 files?
    Thanks!

Maybe you are looking for