Lightroom catalog backup find missing file location- please help!

Hi,
Before I start, if anyone can answer this question I would be so grateful. I would cry!
Ok, so let me start.
Recently I cleared my whole entire mac and backed up everything on a hard drive. when I reinstalled lightroom on my clean mac, I also imported the catalog that I backed up. It all worked fine, and this post isn't about a lost catalog, or accidentally deleted photos.
So, what is hapenning is. When I imported my catalog I got an error message, for all the photos and folders. this:
So I found re-finding the folder, or finding the "missing file location" (which is so annoying because I wished Lightroom just backed up the pictures along with the catalog). But when I found the folder, only some photos showed up and some still displayed the exclamation mark.
Now I do have all the photos with the exclamation marks in folders on my backup hard drive, BUT they are all unedited raw versions. I honestly cannot go back and edit 2000 photos, especially after me having to clean all of the photos when my camera had over 30 spots of sensor dust on the photos. So those backup photos are what lightroom backed up, but I want to know how I can recover the photos in the lightroom catalog with the edits APPLIED.
May I PLEASEE get help on this. I am SO STUCK and do not want to mess up ANYTHING at all!
I would appreciate so much for ANY help! PLEASE!
Kind regards,
Josh

Please post on the Lightroom Forum.

Similar Messages

Why can't Lightroom TRY to find "missing" files?

It's so frustrating--can someone please tell me why Lightroom can't even TRY to find "missing" files? Years and years ago, iView (now Expression Media) did it so it shouldn't be that difficult to offer "missing file suggestions"!

CSS Simon wrote:
Vienna_Sydney wrote:
If you move and rename your files from within LR, your outside programs can't find them, unless you export them. This creates quite a mess in the end
What outside programs do you have in mind?
By outside programs I meant Adobe Bridge and CS5. The only filenames that remain unchanged are the raw files. I eventually rename files as part of the workflow. I work with 3 different cameras, all creating different filenames. As LR is limited in what it can do, but not without its merit, I have to use other programs.
Anyway, I don't have a problem - as I had mentioned in my first reply. Synchronising folders does the job for me very well

Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Desired backup lost/missing from list, please help!

Hello there,
I've gone through a lot of topics but can't seem to find the exact same situation as mine. Please forgive me if I'm duplicating.
I have been using an iPhone 3G with iOS 4 and I wanted to downgrade it back to 3.1.3. Because I know that the iPhone 4 will be released where I live in a week's time, what I wanted to do was to do a backup, so that my SMS'es and other data can be saved from today till the day I get my iPhone 4.
I understand that if I go back to 3.1.3, I won't be able to restore any backups that I've done since I upgraded to iOS 4.
Here's what happened today.
5:21PM
I synced my iPhone 3G and just to make sure, I also right-clicked on my iPhone 3G and performed a backup
5:23PM
The backup completed
So I downgraded my iPhone 3G using the method from this site.
http://lifehacker.com/5572003/how-to-downgrade-your-iphone-3g%5Bs%5D-from-ios-4- to-ios-313
All went well. At the point where I was asked to 'Setup as a new iPhone' or 'Restore from the backup of XXX', I simply unplugged the iPhone (because I had to go out for dinner).
So the iPhone was working with 3.1.3 just fine.
Came back around 8PM, plugged my iPhone to my MacBook and iTunes showed the same screen, asking me to 'Setup as a new iPhone' or 'Restore from the backup of XXX'.
8:06PM
So, I thought, I should select 'Setup as a new iPhone', clicked on it, then nightmare! Because I remembered seeing from somewhere that the latest sync (in this case setting up a new iPhone) will automatically erase the latest backup.
8:07PM
The set up on a new iPhone was completed. I quickly checked iTunes>Preferences>Devices>Backup to see if the latest backup I wanted to keep was there or not. And indeed the 5:21PM back was wiped.
Now showing the following backups
iPhone 3G - 23/07/2010 8:50 PM
iPhone 3G Test (this is the one where I was mucking around with the files and changing the log)
XXX's iPhone 3G - 01/06/2010 1:31 PM
XXX's iPhone 3G - 23/06/2010 7:55 AM
XXX's iPhone 3G - Jul 18, 2010 8:26 PM
XXX's iPhone 3G - Jun 24, 2010 5:37 AM
I really should have made a copy of that backup from 5:21PM and kept it somewhere before clicking on 'Setup as a new iPhone'. But it's already too late.
Can anyone please help me restore my backup that was created in the first place (the one at 5:21PM)? I'm willing to go back to iOS 4 for this matter. If it would help for me to post any screen shots of the folders and files, please let me know. I'll upload them somewhere and post the links in later replies. Because I've upgraded it since it was released, there's too much data to lose, especially my SMS'es. Please help~ Thank you so much in advance!
Best regards,
88kin

Vintage Glam Whitney
Welcome to the Apple user discussion forums
Choose Go to Folder from the Finder's Go menu, enter /Volumes/ as the path, and move the extra folders out of it. If you then need to consolidate the libraries, use this iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/
It is important to try to set your external drive up so it does not accidently get unplugged while you are using it - that can corrupt your database
LN

Missing Files. Please help!

My computer automatically restarted today and it didn't save the website I was working on. This wouldn't be a problem if it wasn't such a huge task. Is there any way I can find the files that didn't save and open them up in iweb????

Unfortunately, if your files did not save, then there is nothing to find.
You can use Spotlight or search to try to find the files, but your domain file is stored under User/Library/Application Support/iWeb/domain.sites.
Try this and see, but if not, you are looking at starting again from scratch.

Import Catalog vs. Find Missing Files

I had my primary image storage hard drive fail. I am switching to my full backup, however I have hundreds of folders containing 118,000+ files and want the best way to access them.
I can have the existing catalog Find Missing Files, and that preserves the History from teh Develop panel, but it seems that I can only find files within a subfolder, which means that I have to do that for every individual subfolder in the sack.
I can also Import Catalog, but my question is: Will that preserve the History from the Develop Panel or will it simply import the files, as edited, but without showing the step-by-step edits previosuly completed?
I imported a couple of individual subfolders (not the Import Catalog option) and the files came through with edits intact, but no History (History began with the new Import).
Any ideas? Finding Missing Files folder by folder is a potential time suck of epic proportion, but I want to preserve my work history.
Thanks,
David Feldman
LR5 on an iMac running 10.8.5

Thanks for the suggestions. But here's more details...
The Find Missing Folders so far (I will see if I am missing someting) has not worked from the parent directory. I will look again to see if I glossed over an important step.
As for the drive, it is a Drobo S 5-disk array. The disk experienced a bad sector reorganization, which was successful (all partitions readable and writeable). I prepared to swap out the newly-classified "bad" disk and install the new drive. My major blunder was to accept the Drobo firmware update because IMMEDIATELY after doing to upon reboot the Drobo now showed that ALL OF MY DRIVES WERE NOT INSTALLED, not just the one empty bay waiting for the newer, bigger backup drive.
Needless to say, I'm out of the 90-day "we'll help you" period, but they are trying to get a one-time papel dispensation to allow me to receive assistance via e-mail.
So, for now, I ain't doing squat to the Drobo array until they come up with a way to access my data. I would, however, like ot keep working, hence the need for a new catalog.

Where can i find .trn file location when i successfully take the back up of the database?

Where can i find .trn file location when i successfully take the back up of the database?
I accidentally deleted some records in my table, then i followed the procedure based up on this blog:
"http://sqlbak.com/blog/recover-deleted-data-in-sql-server/"
here it saying to find the .trn file, So here i am unable to find the .trn file where the location file i can found.
Can some one help to find out of this issue.
Ramesh S

Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id

After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id

Find Missing Files Automatically

Is there a way to make itunes find missing files automatically?

The "missing file" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then say no when asked to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions. I can provide a step by step guide if you give me the two paths.
In some cases iTunes may be able to repair itself if you go through the same steps and locate the lost track. It may then offer to attempt to automatically fix other broken links. This feature should work if the files are in the standard iTunes layout but on a different path from that expected by the library. Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto try to load them first, then Lightroom can't find the files. Big problem. What to do?

I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?

Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD

I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!

I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!

I have version 4.4.1 on my computer now, which is functioning properly - but does not read the .ARW files. When I download the link you sent and try to open it, it pops up as version 5 and I get this image (attached). This is my first time in one of these threads, not sure if i have to reply to each of you individually?
DdeGannes, could you please tell me how to recover the serial number from my operating system?
Thank you SO much everyone!

HT4910 I need to find the file location for my iCal in iCloud

I need to find the file location for my iCal in iCloud for my Mac. I inadvertently changed the file location in Terminal and need to restore the proper location but do not know how to locate that information. Any help is much appreciated,

You should find "Preferences" in your Edit menu in iTunes.

Installer failed to initoalize. This could be due to a missing file. Please download Adobe Support Advisor to detect the problem.

I see error
Installer failed to initoalize. This could be due to a missing file. Please download Adobe Support Advisor to detect the problem.
What can I do

Error "Installer Failed to Initialize" | Install desktop application | Windows

I can't login, keep geting "Your Startup Disk is Full" and asking me to delete file. if I cant login how can I delete files? Please help

I Keep getting "your startup disk is full" ..... "You need to make more space available on your startup disk by deleting file..." If I can't have an acess, how can I delete files. Please help..

That means the hard drive of your computer is full, and you don't have enough free space on your computer, to do what you are trying to do.
You need to clear up space on your computer.
If you hard drive is full, check the following places to ensure they are not holding unwanted data.
- your trash can in the dock
- if you use iPhoto, your trash in iPhoto - launch iPhoto, and select trash in the left hand column. iPhoto has it's own trash, and is often overlooked
- your download folder - finder / home user / downloads - every time you download something, it stores it here. This is often overlooked as well
- do you have more than one user on the computer? If you do, ensure they are needed. If not, delete them, and the contents of their home folders
If you hard drive is very full, you may want to consider the following:
- putting in a newer larger hard drive - (call you local apple store for prices on this)
- deleting data off your computer
- moving data to an external drive - (iPhoto Libraries, iTunes Libraries or iMovie events, as they are the biggest space hogs)

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys

Lightroom catalog backup find missing file location- please help!

Similar Messages

Maybe you are looking for