Lightroom CC starts once, but fails on second time

After resolving the "Start" problem fixed by "Log off/Log in" in Create Cloud, I finally be able to try Lightroom CC.
But when I quit Lightroom, and restart it a second time, it crashes :
If a remove the "catalog" on file system, ligtroom starts again once.
But when I quit, same issue again.
Any ideas ?

No, the catalog is on my main drive.
By removing the catalog on file system, I've deleted the catalog directory directly from the Finder app.
By doing that, Lightroom does not find the previous catalog, and so ask me to choose or create another one.

Similar Messages

I have embedded a Quicktime movie in my web site. I can watch it once, but not a second time. Why won't it reload?

I can watch it with Safari on my mac and on my iPhone as many times as I like. But I can only watch it once on Firefox.

If reloading works after clearing the cache then that can be an indication that the server sends the file compressed. If the file is compressed and is partly uncompressed in the cache and Firefox tries to retrieve the remainder and restarts at a wrong position (difference between compressed and uncompressed content) and thus the file gets corrupted.
You can try to contact the hosting company of your website to ask them about this.
A test can be to set the pref network.http.accept-encoding to an empty string on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Process q001 started up but failed with error = 20

Dear All,
I am facing the following error in my alert log file. I am using oracle database 10.1.
Process q001 started up but failed with error = 20
Process q002 started up but failed with error = 20
Tue May 18 12:11:53 2010
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
users unable to connect to database.....
Regards

This may be due to AQ_TM_PROCESSES parameter.
what is value of AQ_TM_PROCESSES parameter..
Also paste value of processes parameter.
Also login as sysdba and give output of :
select * from v$resource_limit;
Regards
Rajesh
Edited by: Rajesh Lathwal on May 18, 2010 12:48 PM

Process m000 started up but failed with error = 20

Hi,
Could anybody tell me what does this mean ?
Process m000 started up but failed with error = 20
Thu Aug 1 15:22:34 2007
Process q000 started up but failed with error = 20
Process q000 started up but failed with error = 20
Process q000 started up but failed with error = 20
Thanks,
P.

Check metalink note 334704.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:4536502596857368347::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,334704.1,1,1,1,helvetica

Suspends fails the first time, but succeeds the second time

Hi all,
I am running Arch Linux on my Dell XPS 15 9530 laptop, and overall I am very happy with the combination. I have however had some issues with suspending.
The problem is that the first time I try to suspend the machine it seems to go to sleep, but then two seconds later it automatically wakes up again. If I then immediately try again to suspend, it works (it does not wake up automatically). Does anyone know what could be going on, and how this can be fixed?
Usually I suspend from my gnome 3 desktop, but I have also tried to suspend directly using 'systemctl suspend' without having an X server running, and the result is exactly the same. I have tried a few versions of the vanilla kernel, but also the linux-lts and the linux-ck images, but to no avail.
Here is the output from dmesg, where suspend fails:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.543 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 334.544 msecs
PM: late suspend of devices complete after 0.201 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.944 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.424 msecs
PM: early resume of devices complete after 0.091 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
PM: resume of devices complete after 2769.054 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
and here where suspend succeeds:
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.412 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 780.265 msecs
PM: late suspend of devices complete after 0.387 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.988 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.411 msecs
PM: early resume of devices complete after 0.097 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
PM: resume of devices complete after 2801.389 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
systemd[1]: Requested transaction contradicts existing jobs: File exists
systemd[1]: Service sleep.target is not needed anymore. Stopping.
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
It seems to me like the only real difference has to do with the xhci_hcd errors, perhaps the following:
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
Any input or help would be highly appreciated.

Rexilion wrote:Maybe you could confirm your suspicion by rmmoding xhci before suspend and modprobing it after resume?
Thanks for the response. I should have said so, but I had already tried that, but without any luck. It seems like it doesn't change anything.

Itunes 10.5: It starts once, but not twice....

Hi there everybody,
I have a question, I have myself a new gaming pc, everything works, software, hardware, no problem at all.Itunes also worked perfectly, I use itunes, because I have an i Phone and, well, I just need Itunes to sync everything.
Now a few days back, my Itunes started acting up, all of a sudden it kept asking me for my password because it needed authorization for automatic downloads. Also, Itunes would boot only 1 time, not more, whenever I closed it up and needed it to boot up again, it wouldn't. After a reinstallation, I kept having these problems, so I deleted Itunes again, and deleted every Apple related directory from my pc, even within the hidden directories. I knew that this would maybe help, cause alot of programs these days don't delete everything, even if you tell them to;) It sort off helped, I don't have the problem with the password asking anymore, but still Itunes only boots once a "pc startup".
The Symptoms:
Itunes boots once, but not for a second time.
Itunes.exe and ItunesHelper.exe do show in the processes tab of the task manager.
Whenever I close these processes and I try to start Itunes, Itunes freezes on my screen as a square gray space.
Can someone please help me, cause, as sad as it sounds, I am really annoyed by having a brandnew pc, having everything work perfectlly, better than ever, and still have 1 program that doesn't work properly...Itunes.
If you need any more detail, just ask me:)
Thanks everyone!

Seems like I found myself a solution with the help of some random thread I found (thank god), seems that APSdeamon, also known as ApplePush, seems to cause the prblem here. Terminate the process in the process tab, and everything works out fine again. Maybe a bit drastic, but you could also delete the .exe file and never have the problem again.

Edge animate animation does not start the first time I load the page. But does the second time.

Hi all,
I am having trouble with an edge animation on a web page. It doesn't load the first time the page is loaded, but loads fine the second time or any time after that. To test I am clearing my cache, then reloading the page. It seams to work in IE the first time but not Firefox or chrome.
I have a temporary copy of the page here ... http://emiwip.com/monique-mathieu/landing-page-wip.html
Can anyone tell me what is going on?
Thanks.
Dan

I found the answer here ... Publishing no longer works in latest Edge
It appears that you need to load the latest jQuery in the head of the pag. That fixes it.
Dan

First Java Web Start download doesn't update, second time does

I'm using Java Web Start with our application. This release we upgraded to java 1.5 from 1.4. Now I have a few PCs, not all, that do not get updates the first time they launch the application. But when the launch it the second time they get the download. The jnlp didn't change between releases? Any suggestions? I'm not using lazy loads, in fact I'm using the default which should be eager.
Thanks.

Hi,
I have similar situation. At the machine is installed Java 1.6 u1. Setup first version of application. After deploy second version of application and run application start update, but console show that application use old packages. At the same time main package is uploaded? I'd try to use <update check="always"?> but there are no positive result.
At the same time then installed Java 1.6 u2, all works fine.
Any suggestion, how it could be resolved, without Java 1.6 u2 installation?
Thans, Kirll.

C++ Call to DLL made in LabVIEW Fails the second time it is called

I have an application where a C++ executive calls a LabVIEW DLL (a LabVIEW application built into a DLL).
The executive calls and operates the DLL fine the first time (NT, the applications task manager shows LabVIEW runtime runs, then stops when the DLL is done. However, when the executive calls the DLL a second time, it hangs, and the runtime engine never shows up in the applications task manager as running.
However, this only occurs when something like IMAQ, DAQ, or another custom DLL call is occurring. We tried it with a simple DLL that only uses a call to the sound VIs, and it seems to run fine, although as the program called is very short, and the task manager slow, we never see the runtime engin
e in the task manager. We are going to put a popup dialog in to ensure that the DLL is being called reliably, but we believe it is.
We are unable to answer why when we call something that uses IMAQ, that the DLL doesn't run right the second time. We are unsure of the reasons, but believe it to be related to thread creation and destruction in the executive.
If anyone out there has any insight into this, we would be happy to see it.
We will be putting in a formal request for support from NI, but wanted to poll the audience as well, as we know from first hand experience that LabVIEW users often times have more experience with this sort of thing than developers.
Thanks a bunch

> Thanks for the information Greg. There is no documentation on this
> issue, except for the email that we got from NI Support. This is
> quite a new realm for us and NI alike. We would like to know what
> your experiences have been on this subject. If you have a bit of
> information, perhaps we should suggest a topic. As I said, this is a
> new frontier for LabVIEW, and there are a lot of things that NI
> doesn't know, and I'm sure a few of the programmers out there have
> figured out.
>
I often answer emails from home, but I work for NI on the LV development
team. So anything I know about, NI knows about. The info I was
describing about the DLL execution system is not well documented since
we were hoping that it would work we
ll with the way Windows Apps are
typically written. I suspect that we will need to write a Tech Note
to cover the nitty gritty. This sort of info gets lost in manuals,
and it is subject to change as we learn how people are expecting to
use it.
Anyway, my post was to explain why your use of it didn't work.
In general, we believe that LV DLLs are thread savvy, reentrant
VIs can be called from multiple threads simultaneously, execution can
continue in the background after the DLL call has returned, and the UI
is live provided the calling app processes messages in that thread.
If you have other issues or questions, just ask.
Greg McKaskle

ITunes starts once, but only once.

This happened to me before, basically what happens is I download a new version of iTunes, install etc., it works fine. However, as soon as I restart my computer, from there after iTunes just simply won't open. I've uninstalled, redownloaded, installed, restored memory, tried different versions, everything I can think of but nothing fixes it, which leaves me with Winamp or Media Player, both of which I really dislike. I'm running 03 XP on a 03 or 04 HP Pavilion, and up until now iTunes has worked fine since I got my first ipod some 3 years ago. Any suggestions or links I may have overlooked? Thanks.

Start with this article - see if it will work in another windows account, first.
http://support.apple.com/kb/TS1421

[Solved] White screen when user switching, but only the *second* time?

I finally got around to adding another user to my arch installation.
Here's what happens --
User A is logged in
User A selects logout, then "switch user" --> GDM login screen comes up *properly*.
User B does whatever, selects logout, then logout (I haven't tried yet with switch user for this step, can't imagine it being any better)
Logout occurs, but instead of GDM it's a white screen.
Entering login credentials blindly does return to original session of User A, however.
This is Arch 64, Nvidia driver, GNOME, compiz fusion...
Last edited by arch_nemesis (2009-01-20 14:15:16)

It appears that some update in the past few days fixed this problem. Yay!
However, I really hate having to bow to the "it fixed itself" fairy, so if anyone knows any way I may have been likely to fix it by accident (I am sort of continuously messing around with things, but nothing that I'd think would impact this), I'd still be interested to hear it.

ITunes wont start the second time

Hi, I posted this problem before but probably because my subject title was a little wide nobody looked at it..
This is my problem, I download iTunes install it everything works fine but after I close itunes or my computer when I want to start iTunes again it wont start???

I have the exact same problem. I use Windows Vista SP1.
iTunes.exe does show up in the task manager, but there is no way I can access it, because it doesn't show up.
I had this problem since I installed the update to iTunes 8. I tried several times to completely uninstall it an reinstall it. Everytime it worked the first time, but failed the second time. Then I uninstalled agan and reinstalled iTunes 7. Same thing, worked first time, failed since then.
Does anyone have an idea what the problem is ? There is no error message.
Thanks in advance!

Fam starts on boot but fails to stop on shutdown

I have kdebase, kdelibs, kdeutils, kdenetwork, kdeartwork, kdepim and kdegames installed.
I'm new to arch.
I modified /etc/rc.conf to:
DAEMONS=(syslog-ng !hotplug !pcmcia netfs crond dbus hal portmap fam network alsa cups adsl clamav postfix kdm)
fam starts properly but fails to stop at shutdown or reboot. Why is that and how do I solve it?

I'm afraid to say the problem is back even if the timeout value is set to 0, after I rebooted twice today the problem happens again. Any idea why?

Calling spclientcontext.executeQueryAsync works on the first call, but fails on the second call

I have a webpart that I'm using to display a tree of folders and files from a SharePoint list. When a folder is clicked, some client side code is used to expand the contents of the folder (the code queries the SharePoint list for any child items of the folder).
The code works the first time the folder is clicked. However, if I then click on a sub folder, the code fails. If I click on the sub folder a second time, the code succeeds. This pattern continues - every second time I call my function, it fails.
E.g.
First Click (clicked on Guides), which succeeds, and expands the Guides folder. Second Click (clicked on "In Progress") (fails)
Third Click (clicked on In Progress) (succeeds)
Any ideas why this might happen?
My code looks like this:
var _dweb;
var _dlist;
var _dwebId;
var _dlistId;
var _dfolderUrl;
var _dchildContainerId;
var _dactionContainerId;
var _dlistItems;
var _rtdocsJsInQuery = 0;
function expandorcolapsefolder(webId, listId, folderUrl, parentElementId, childContainerId, actionContainerId) {
var parentElement = $(("#" + parentElementId));
var childElement = $(("#" + childContainerId));
if (parentElement.attr("expanded") == "0") {
parentElement.attr("expanded", "1");
childElement.css("display", "block");
} else {
parentElement.attr("expanded", "0");
childElement.css("display", "none");
return;
if (childElement.attr("dataretrieved") == "0") {
GetData(webId, listId, folderUrl, childContainerId, actionContainerId);
function GetData(webId, listId, folderUrl, resultsElementId, actionContainerId) {
if(_rtdocsJsInQuery==1)
alert('Please wait for the previous action to finish, before trying again.');
_rtdocsJsInQuery = 1;
_dchildContainerId = resultsElementId;
_dactionContainerId = actionContainerId;
_dwebId = webId;
_dlistId = listId;
ShowActionContainer(actionContainerId);
try {
var context = new SP.ClientContext.get_current();
_dweb = context.get_web();
_dlist = _dweb.get_lists().getById(listId);
var query = new SP.CamlQuery();
query.set_viewXml('<View><OrderBy><FieldRef Name="Title"/><FieldRef Name="FileLeafRef"/></OrderBy></View>');
query.set_folderServerRelativeUrl(folderUrl);
_dlistItems = _dlist.getItems(query);
context.load(_dweb);
context.load(_dlist);
context.load(_dlistItems, 'Include(ID,Title,DocIcon,_dlc_DocIdUrl,DisplayName,FileSystemObjectType,FileLeafRef,ServerUrl)');
context.executeQueryAsync(QuerySuccessful,QueryFailed);
} catch (e) {
alert("Failed to execute query... " + e);
HideActionContainer(actionContainerId);
function QuerySuccessful(sender, args) {
try {
// Code omitted.
} catch (error) {
alert("Failed to process query results... " + error);
_rtdocsJsInQuery = 0;
window.setTimeout(HideActionContainer(_dactionContainerId), 500);
function QueryFailed(sender, args) {
alert('Failed to get list items. \nError: ' + args.get_message() + '\nStackTrace: ' + args.get_stackTrace());
_rtdocsJsInQuery = 0;
HideActionContainer(_dactionContainerId);
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

I fixed this problem by initialising the clientcontext object with a URL (rather than using the get_current property). This suits my needs, as the web that the page the webpart is on, won't always be in the same web as the list.
I'm still unsure why "var context = SP.ClientContext.get_current();" fails every second time?!
Here's the snippet of code I changed, for others reference (namely "var ctx = new SP.ClientContext('/weburl');"):
function GetData(webId, listId, folderUrl, resultsElementId, actionContainerId) {
if(_rtdocsJsInQuery==1)
alert('Please wait for the previous action to finish, before trying again.');
return;
_rtdocsJsInQuery = 1;
_dchildContainerId = resultsElementId;
_dactionContainerId = actionContainerId;
_dwebId = webId;
_dlistId = listId;
ShowActionContainer(actionContainerId);
try {
var ctx = new SP.ClientContext('/eog');
_dweb = ctx.get_web();
_dlist = _dweb.get_lists().getById(listId);
var query = new SP.CamlQuery();
query.set_viewXml('<View><OrderBy><FieldRef Name="Title"/><FieldRef Name="FileLeafRef"/></OrderBy></View>');
query.set_folderServerRelativeUrl(folderUrl);
_dlistItems = _dlist.getItems(query);
ctx.load(_dweb);
ctx.load(_dlist);
ctx.load(_dlistItems, 'Include(ID,Title,DocIcon,_dlc_DocIdUrl,DisplayName,FileSystemObjectType,FileLeafRef,ServerUrl)');
ctx.executeQueryAsync(QuerySuccessful,QueryFailed);
return true;
} catch (e) {
alert("Failed to execute query... " + e);
HideActionContainer(actionContainerId);
return false;
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Lightroom CC starts once, but fails on second time

Similar Messages

Maybe you are looking for