Lightroom CC - Windows 7 - AMD Radeon HD 6700 not recognized

Just upgraded to Lightroom CC, discovered that my HD 6700 GPU is disabled.
Photoshop CC however has no issues with the HD 6700:
I checked for the latest AMD driver but that one was already installed. OpenGL Extensions Viewer confirmed that GL support is 100% up to version 4.4.
Some supporting info:
I also installed and tried out the latest AMD Betra driver (labeled 15.4Beta), with no change:
Thanks for your assistance.

There are at least six other threads on this subject already:
OpenGL Failure in Lightroom CC
GPU Acceleration not working
Lightroom 6.0 OpenGL acceleration not working with NVIDIA GTX 750Ti
Lightroom CC does not support Intel HD 3000 on MacBook Pro - please add support !!!!
GPU acceleration not working when exporting images on Lightroom CC
Which GPUs are supported with Lightroom 6?
Can we try and keep discussions all in one place, please?

Similar Messages

I have a new Windows laptop with iTune that is not recognizing my iPhone 5?

I have a new Windows laptop with iTune that is not recognizing my iPhone 5? I have the latest version of iTune and when I open iTune it comes up with an error message that " the registry settings used by the itunes driver for importing and burning CDs and DVDs are missing" Thismessage always come up, even after installing the latest version of iTunes.

Same is here
Have a MacBook Pro , upgraded to Lion and now cannot download music from CD to ITunes "... An unknown error occurred (-50)".
Help

AMD Radeon HD 6470M Not working-on Windows 8.1 Enterprise 64-bit -"Hp Pavilion g6 series "

I am now using Windows 8.1 Enterprise 64-bit .the display drivers are not working good. i cant use properly Adobe Photoshop(CC , CS5..etc).
All the "Hp Pavilion g6 series " [Pavilion g6-1201tx]Has the problem. Display Driver .-AMD Radeon HD 6470M
i download lates vertion from here :-
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx
But after install i got error message on Device manager.
Error Message:- "Windows has stopped this device because it has reported problems. (Code 43)"
my laptop Specification here:-
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03061225&prodSeriesId...
Any suggestions?

Install the newest Windows 8 (64-bit) driver for your notebook only from the HP web support download section.
uninstall the drivers for both adapters and the Catalyst Control Center by running the softpaq and choosing uninstall all. Once you have done that run the installer again and (select install all) install the Catalyst Control Center and the drivers.
The switchable graphics capability makes your notebook require the drivers from HP to achieve the switchable graphics capability.
Don't forget to share your results with the forum community.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Lenovo G500 Windows 7 AMD radeon Driver

Hello i have recently installed Windows 7 in my Lenovo G500 but i cant seem to find The AMD radeon driver anywhere..please help.

Yes, it is either 5.0.1 or 5.0.2, not sure which.
But it would likely require you purchase Mountain Lion to upgrade. But you can update to 10.7.5 for free to see what you get.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Amd radeon hd 6470M no funciona con windows 10 / amd radeon hd 6470M doesn´t work on windows 10

Actualicé mi laptop sony vaio VPCSB45FL de windows 7 a Windows 10 y no funciona la tarjeta grafica AMD Radeon HD 6470M, descargue e instale nuevamente el driver desde la pagina de sony pero windows 10 al reiniciarse instala automaticamente el driver para la tarjeta amd radeon hd 7400M el cual no funciona adecuadamente no puedo acceder a los juegos que normalmente ejecuto en el pc como por ejemplo fifa 15 y tampoco funciona el selector para activar o desactivar la targeta grafica AMD; alguien conoce alguna solucion para este inconveniente?Muchas Gracias

Muchas gracias por tu respuesta, yo tambien ya intente con todos los drivers y ninguno funciona, lo unico sería esperar si sony se anima a desarrollar la actualizacion del driver para windows 10 pero parece que no van a brindar soporte para muchas computadoras lo cual me parece una falla muy grande ya que mi laptop tiene los requerimientos de sobra para poder correr windows 10 por este motivo no compraria otra vez una computadora sony, por ahora en el foro de AMD me recomendaron instalar leshcat drivers que de pronto podrian funcionarhttp://leshcatlabs.net/; esta es la guia http://leshcatlabs.net/manual_chm/segun eso habria que instalar los ultimos drivers de intel y amd para que funcione sin deshabilitar el switch.

AMD Radeon Graphics Card Not Found! Please Help HP Envy M6...

When I head into device manager, it shows that I have only an Inter (R) HD Graphics 4000 graphics card even though the laptop is said to have an AMD Radeon built in... I've upgraded my version of Windows but it doesn't make sense, why does this driver go away? I've reinstalled every driver there is for the AMD series... I can't get my laptop to detect the graphics card, has anyone had this problem? I've seen this on threads too but the answers weren't helpful at all because they just redirected the user with a link to another thread which isn't relating to a graphics card. Is there any way I can fix this so my laptop can detect my graphics card?
Note: When I run AMD's 'automatic driver checker', it CANT EVEN DETECT IT ... Please help me, there's just one too many problems with this laptop aside from the fact that it overheats like crazy.
Thank you,
Shehryar.

This is the picture that I've taken, you can see that the Intel HD Graphics 4000 is indeed there however, I found an unknown device at the bottom. There is NO information of this device, here is the 'info' for the unknown device:
Device type : Other
Manufacturer : Unknown
Location : On PCI Express Root ComplexUpdate driver will not work. I'll look for more but that's really it... Thanks Shovon_Khan!

Vostro 3560 - AMD Radeon HD 7670M not working

Hi guys,
I bought an DELL VOSTRO 3560 with Intel and AMD graphic card, but when I trying to run switchable graphic card, it show an error message also when I run any games like (MS Flight simulator X) it don't detect my AMD graphiv card.
also my OS is Windows 7 64bit and I upgrade all drivers.
please see attached picture after I run AMD switchable graphic:

Hi,
Let me try to clarify you. The AMD Radeon HD 7670M works with Intel HD Graphics with a technology called "Enduro" that define (by the system) which graphic will be used in determined conditions.
If you have the "Automatic Windows Update" setted "on", and like Dell did not released any new graphic driver for more than one year, your system will detect (automaticaly) new drives for Intel Graphics HD 4000 and will install them. And it's the cause of your problem. It will mess your graphics configurations.
Like Ravi Chandra stated, you may need to completely unistall all graphics stuff and reinstall last Dell's driver (http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/vostro-3560?driverId=3WKM7&osCode=W764&fileId=3147193857&languageCode=en&categoryId=VI). It will restore your system graphics funcionalities.
To avoid new issues, I would suggest you to read this thread: http://en.community.dell.com/support-forums/laptop/f/3519/t/19486888.aspx?PageIndex=1.
Me and another community member, after the procedure above, have installed AMD Mobiity Graphics Drivers (http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx) over the Dell's A04 drivers. And, after installed latest Intel Graphics updates (http://www.intel.com/p/en_US/support/detect?iid=dc_iduu).
We kept all graphics devices functionalities with completely updated drives.
Don't ask me why Dell did not release this solution. Me and the rest of world don't know.
Let we know if this solved your issue
Regards.
Marco

Windows uninstalling device- my iPod is not recognized in iTunes so how can I fix this?

I haven't had a lot of problems with my iPod or iTunes until recently, when I plug my iPod in, it is not recognized. I tried EVERYTHING to fix it, went as far as restoring it to it's factory settings.... I've uninstalled and reinstalled iTunes about a million times, and I think the problem is iTunes. The iPod and the USB chord thing is not the problem. My iPod and the chord will connect to another computer that I have. So I went into the device manager and found
USB Storage Device
and underneath:
windows is uninstalling this device.(Code 21)
Okay, so I'm not the geek squad and I'm not good with computers or anything AT ALL. I've done my research, and I've found a lot of search results for this problem, but all that I have found have been recognized so the problem has been fixed for them fairly easily.
I have an iPod nano generation 5
I have a lenovo 2005-2006 in computer
I also have windows 7- but I CANNOT update it (this may also be the problem but I need a way to work around it)
All I know is I'm having music withdrawal.
Any way that you can help please?

Hi cecebabymusik,
Welcome to the Support Communities!
Try the specific steps below for the your iPod touch first:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I hope this information helps ....
- Judy

HT1386 I can charge my phone on my windows 8 computer, but it is not recognized by itunes on the computer

I have a new Windows 8 computer, and I tunes will not recognize my phone, but I can charge it fine with the USB cable.

follow this: iOS: Device not recognized in iTunes for Windows - Support - Apple

Running Windows 7 via Bootcamp - USB Device Not recognized.

I am running Windows 7 64 bit via Bootcamp on my MacBook Pro (2012 non-retina display). USB devices are not being recognized within Windows 7 (USB Device Not Recognized error).
I have done some research and tried a few possible solutions but nothing has worked so far. Here is what I have tried:
- Uninstalling all USB drivers within windows and then restarting to let Windows re-install the drivers.
- Uninstalling Intel 3.0 USB Host Contoller and restarting Windows.
- Repairing the drivers using Bootcamp setup.
- Uninstalling bootcamp and re-installing bootcamp services.
The USB drives are working fine within OS X, just having issues in Windows.
Any suggestions?
Thanks in advance.

3.0 is on your OS X DVD. Clearly spelled out in the guide in Boot Camp Assistant, and here -
www.apple.com/support/bootcamp : manuals, look for 10.6 pdf version.
3.0 is pre-requisite for any other
OS X comes with Boot Camp Assistant and you access 3.0 drivers while in Windows.

AMD Radeon R9 280x not detected by ASUS Z97-A

Hi all,
I just purchased a MSI AMD 280X Graphics Card (Twin Frozr) and have put it in a new build, but I can't get it recognised by the BIOS/Windows. My PC has the following specifications and I'm wondering if my power supply is the issue:
Asus Z97-A Motherboard
Intel Core i5 4960k Processor
MSI AMD 280X Graphics Card 3GB
Cooler Master Hyper 212 EVO (120mm)
Samsung 2.5-Inch 250 GB 850 EVO Solid State Drive
WD 1TB 3.5 inch Internal Hard Drive - Caviar Blue
G.Skill RipjawsX 8GB (2x4GB) DDR3 PC3-14900 1866MHz Dual Channel Kit
Corsair Builder Series CXM 600W Modular 80 PLUS Bronze Certified ATX/EPS PSU
The power supply is 600W and this seems fine when I put my specifications into a power supply requirements test (they seem to recommend anything from 400W - 550W), but I don't know how trustworthy they are.
I have tried a few things:
1) Initially I had only attached the PSU with the 6+2 pin power cable to the 6 pin port on the graphics card (leaving 2 pins dangling). The fans on the card spun at normal speed, however my BIOS did not pick it up. The system booted as normal with integrated graphics.
2) I updated my BIOS to latest version and re-tried, but still no luck.
3) I attached the 6+2 pin power cable to the 8 pin port on the graphics card. This time the fans didn't spin at all and obviously the card wasn't recognised. The system booted as normal with integrated graphics.
4) I attached the 6+2 pin power cable to the 6 pin port on the graphics card (like step 1) and using the remaining molex power cable on my PSU, I attached a two molex to PCI express (6 pin) adapter to this cable, then attached a 6 pin to 8 pin adapter to the 8 pin port on the graphics card. This time the fan spun for a millisecond and the entire system failed to power up.
5) I attached the two molex to PCI adapter mentioned in step 4 to the six pin port on the graphics card to see what would happen. The exact same scenario - the fan spun for a millisecond and the entire system failed to power up.
6) I repeated all of the tests in another PCI-E slot in case this was the issue, it wasn't!
So yeah, long day with no progress. Is there something wrong with the way I'm configuring the graphics card (the molex -> PCI express -> 8 pin adapter attempt seems convoluted, but plausible) or am I right in thinking it may be a power supply issue? How do you normally fill the 8 pin port on the graphics card? Is my card just faulty?
I could be horribly wrong in what I'm attempting or guessing about the PSU - I'm a complete novice.
Any help much appreciated!

Yeah, the explanation was a bit tricky, so hopefully pictures will help. I'll do it in steps again.
The exact card I was using:
http://www.novatech.co.uk/products/components/amdradeongraphicscards/amdr9280xseries/r9280xgaming3g.html
1) I connected the 6+2 connector below to the graphics card's 6 pin power slot. The fans were spinning at a normal speed but the card wasn't recognised and PC booted with integrated graphics.
6-2 power cable
http://s24.postimg.org/tj27xv3kk/6_2_connector.jpg
Graphic's card's 8 pin and 6 pin power ports
http://s24.postimg.org/azsixy9cl/Power_Ports.jpg
6-2 power cable in the 6 pin power port of graphic's card
http://s24.postimg.org/ymthm2eol/6_pin_adapter_in_card.jpg
2) To supply the power to the 8 pin power port of the graphic's card, I used the molex power cable from my power supply and connected a molex to PCI express 6 pin adapter, then connected a 6 to 8 pin adapter which went in the power port.
Molex power cable
http://s24.postimg.org/6646fcnh1/molex_power_plug.jpg
Molex to PCI-E adapter (6 pin)
http://s24.postimg.org/9w3t88zbp/molex_to_pci_adapter.jpg
PCI-E (6 pin) to 8 pin adapter
http://s24.postimg.org/xuqtmvahh/6_pin_to_8_pin.jpg
3) Assembly of this convoluted cable!
The molex to PCI-E (6 pin) adapter connected to the PCI-E to 8 pin adapter
http://s24.postimg.org/443p13phx/molex_adapter_6_8_pin_adapter.jpg
The cable above attached to the molex power cable
http://s24.postimg.org/xlt8wxxp1/molex_to_molex_adapter_to_6_8_pin.jpg
4) Finally the entire cable connected to the PSU and the 8 pin port of the graphic's card:
http://s24.postimg.org/v9l8zcl3p/all_hooked_up.jpg
Which of course resulted in the system not being powered at all! So if the PSU is powerful enough, how am I supposed to get power to the 8 pin port on the card? Can I do this without adapters? As I guess this is where I'm going wrong.
Thanks in advance.

XFX Radeon HD 5450 not recognized

Have new H405 with Windows 7 Home Premium. When I install an XFX Radeon HD 5450 in the slot and boot up, nothing comes on the screen (was previously using this same card on a Dell Inspiron 530 S to enable to monitors and it worked fine). Any ideas?
Thanks,
Mpippa

There are at least six other threads on this subject already:
OpenGL Failure in Lightroom CC
GPU Acceleration not working
Lightroom 6.0 OpenGL acceleration not working with NVIDIA GTX 750Ti
Lightroom CC does not support Intel HD 3000 on MacBook Pro - please add support !!!!
GPU acceleration not working when exporting images on Lightroom CC
Which GPUs are supported with Lightroom 6?
Can we try and keep discussions all in one place, please?

MSI Radeon R9 290 not recognized

Hello people,
I hope this is the right place to post this. Yesterday I bought components to build a new computer.
- msi radeon R9 290 Gaming 4GB
- 8 gb crucial ram
- 240 gb crucial SSD
- i5 4440 processor
- MSI B85M-E33
- Cooler Master GM-Series G550M
- Cooler Master N200
I can't install catalyst center, I can't recognize the card in windows devide manager. Even in the BIOS its says that the PCIE1 express lane is empty.
So I think that my motherboard is not compatible with the R9 290? Is there anything I can do? Or do I have to buy a new motherboard?( fans of the graphicscard are running)
Please help me:)
Thanks!

There is no reason why the vga shouldn't work with your board although it is not meabt for gaming. Try updating it to the latest bios version using integrated gpu.
To update use the attached (!) bios archive and the >>Use the MSI HQ Forum USB flasher<<
With the >>Use the MSI HQ Forum USB flasher<< point to the attached and NOT unpacked bios archive (Mode 1: Point to Archive).
Let the tool prepare an USB stick for flashing and reboot from the stick. Like before after post switch to bad bios and let the tool update bios. It will flash to the version 3.5.

Connection with Windows 7 PC by USB - PlayBook not Recognized on File Explorer of BlackBerry Desktop

When I connect my PlayBook (OS 2.1) to my Windows 7 PC using USB cable, I do hear the familiar two-tone sound indicating connection, but the Windows File Explorer does not create a Drive Designation letter (such as Z:\). And BlackBerry Desktop Software (latest update), does not recognize it either. I have already tried re-booting the tablet and computer.

uninstall BlackBerry device manager ( not desktop manager), reboot, connect playbook and wait for like 10 minutes for driver to install
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Windows 7 x64 bit and iTunes not recognizing iPhone 3GS

Hello,
I'm sorry to bring this up again and I know the community has seen it a million times but I'm definately needing someone to point me in the right direction. I have an Acer 5552 Laptop with Windows 7 x64 bit. It does not have the Intel P55 chipset as what I have read before in these discussions, so updating the BIOS will not work. I have tried uninstalling and reinstalling iTunes x64 bit, removed and reinstalled the drivers and Apple Mobile Support software (which should do it by removing iTunes as a whole) and whenever I hook my iPhone to my laptop for a second sync it takes a long time to back up and then it gives an error, then when i try to connect it again iTunes says that the iPhone cannot be recognized and needs to be restored. I have done this 3 times in the past 2 months. This is a brand new laptop that I have. There should be no reason for this to happen unless I'm missing something. Is there any workaround to this? for the time being I'm syncing everything on an old, slow desktop that has Windows XP. It's worked with my old laptop which had XP on it great but sadly I gave my old laptop to my dad which he now uses to sync his iPhone with now.
Any help would be greatly appreciated..also if anyone has the same laptop model I have and have Windows 7 x64 on it..please let me know what you did if you got your 3GS to sync all the time with no problems.
Thank you very much.

4 days and no response...really??

Lightroom CC - Windows 7 - AMD Radeon HD 6700 not recognized

Similar Messages

Maybe you are looking for