Lightroom changes file date (build and changeing date) by jpg files

Hallo
I am using Lightroom on Mac OS X Snow Leopard. The Problem is that Lightroom changes both dates of the file (the date when the file was build and the date when you have made changings on the file) when i save the Metadates to the file.
This happens only by jpg files. By raw / xmp files is the date of the raw file not changed, the both dates of the xmp are also changed like by jpg.
I want not to change the time when the file was build. So that i can see in the Finder / Explorer when the file was build ( Photo taken).
How can I solve this Problem.
Thanks for Help

Do not save the metadata to the files. It's quite unnecessary to do so, but of course, you should have full backups of the images and the catalog(s) [.lrcat].

Similar Messages

FIX: Change your Billing Cycle and Due Date!

There are many people angry about the change in billing due dates that have been set by AT&T recently. There is a way to get your due date back to where you want it but does require a little work on your part. NOTE: I am not an AT&T Employee, this is just advice from someone doing a little research! How the change works:First you will need to contact AT&T customer support (as this is just a customer to customer support forum so nobody here can make changes to your account). Let them know you want to change your billing cycle and due date. First month - you must complete your current billing cycleSecond month - you will have a prorated "short" cycle anywhere from 0-29 daysThird month - you will start with the billing cycle on the new date you select. There are a couple of other requirements below just so you are completely informed when talking to AT&T support.
Billing Cycle Change Requirements:
Changing your billing cycle is NOT an option in all service areas so contact support at 800-331-0500 to find out if this option is available in your service area.
Your billing cycle cannot be changed during the five days before or after the close of your current cycle. Your billing cycle cannot be changed if your account is in a delinquent status, or if the account will fall delinquent before the requested change date. If you have a payment arrangement set up, the payment arrangement must be made before the billing cycle is changed. If you have Autopay, you may see two Autopay drafts in one month due to the billing cycle change. Please keep in mind that when a billing cycle is changed you will see prorated charges to get all of the billing back on track with the new dates. Understanding that this does create an inconvenience for many people for the first 2 months you will be where you need to be after and back on track. If anyone has anything to add please do so and I will update my post.

Hi there
This is a great guide that will be very helpful to any of our customers who wish to change their bill cycle dates! I’d just like to thank you for posting this and add some further expectations.
The balance on the prorated second invoice shows as Past Due on the customer's third invoice, even if it is not. The cycle change process does not impact their account status and corrects itself on subsequent bills. With regards to prorated charges, the customer is provided a video bill with their next statement to help explain the charges.
Thanks!
Charise

I have changed my email address and changed my Apple ID. However iCloud on my ipad and an ipad mini still shows my old email address. How can I change my iCloud email address?

I have changed my email address and changed my Apple ID. However iCloud on my ipad and an ipad mini still shows my old email address. How can I change my iCloud email address?

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

Need help regarding Simple Data Client and Simple Data Server VIs

Hi everyone.
I have a simple objective. I just want to test the 2 example VIs, "Simple Data Client" and "Simple Data Server" between 2 computers. I just want to check whether is this working between the 2 computers.
What I have done for now is that I changed the "address", from "localhost" in the "Simple Data Client.vi" to the IP address of the computer running the "Simple Data Server". I runned the "Simple Data Server" VI in one of the computers first followed by the "Simple Data Client" in the other computer. Nothing is received and the client just timed out.
Can anyone please help me troubleshoot and tell me what are the possible problems for this? Are there any wires connections between 2 computers that I am missing or any other configurations I have to make before I can successfully do this?
Thanks.
Regards,
Jonathan

Hi Lee.P.
I understand that. I was just feeling frustrated about the project not working. Sincere apologies from me.
I was wrong about the error number. It is not Error 60. It is Error 59 - The network is down, unreachable, or has been reset.. Yes, I have tried changing the port numbers at the 2 computers when trying to send/receive.
Could anything else be the problem?
Regards,
Jonathan

Download using open data set and close data set

can any body please send some sample pgm using open data set and close data set .the data should get downloaded in application server
very simple pgm needed

Hi Arun,
See the Sample code for BDC using OPEN DATASET.
report ZSDBDCP_PRICING no standard page heading
line-size 255.
include zbdcrecx1.
*--Internal Table To hold condition records data from flat file.
Data: begin of it_pricing occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
f4(18),
f5(16),
end of it_pricing.
*--Internal Table To hold condition records header .
data : begin of it_header occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
end of it_header.
*--Internal Table To hold condition records details .
data : begin of it_details occurs 0,
key(4),
f4(18),
f5(16),
end of it_details.
data : v_sno(2),
v_rows type i,
v_fname(40).
start-of-selection.
refresh : it_pricing,it_header,it_details.
clear : it_pricing,it_header,it_details.
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = 'C:\WINDOWS\Desktop\pricing.txt'
FILETYPE = 'DAT'
TABLES
DATA_TAB = it_pricing
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
WRITE : / 'Condition Records ', P_FNAME, ' on ', SY-DATUM.
OPEN DATASET P_FNAME FOR INPUT IN TEXT MODE.
if sy-subrc ne 0.
write : / 'File could not be uploaded.. Check file name.'.
stop.
endif.
CLEAR : it_pricing[], it_pricing.
DO.
READ DATASET P_FNAME INTO V_STR.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
write v_str.
translate v_str using '#/'.
SPLIT V_STR AT ',' INTO it_pricing-key
it_pricing-F1 it_pricing-F2 it_pricing-F3
it_pricing-F4 it_pricing-F5 .
APPEND it_pricing.
CLEAR it_pricing.
ENDDO.
IF it_pricing[] IS INITIAL.
WRITE : / 'No data found to upload'.
STOP.
ENDIF.
loop at it_pricing.
At new key.
read table it_pricing index sy-tabix.
move-corresponding it_pricing to it_header.
append it_header.
clear it_header.
endat.
move-corresponding it_pricing to it_details.
append it_details.
clear it_details.
endloop.
perform open_group.
v_rows = sy-srows - 8.
loop at it_header.
perform bdc_dynpro using 'SAPMV13A' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RV13A-KSCHL'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RV13A-KSCHL'
it_header-f1.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_CURSOR'
'KONP-KBETR(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMG-VKORG'
it_header-f2.
perform bdc_field using 'KOMG-VTWEG'
it_header-f3.
**Table Control
v_sno = 0.
loop at it_details where key eq it_header-key.
v_sno = v_sno + 1.
clear v_fname.
CONCATENATE 'KOMG-MATNR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f4.
clear v_fname.
CONCATENATE 'KONP-KBETR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f5.
if v_sno eq v_rows.
v_sno = 0.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=P+'.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endif.
endloop.
*--Save
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_transaction using 'VK11'.
endloop.
perform close_group.
Hope this resolves your query.
Reward all the helpful answers.
Regards

What is open data set and close data set

what is open data set and close data set,
how to use the files in sap directories ?

hi,
Open Dataset is used to read or write on to application server ... other than that i am not sure that there exists any way to do the same ... here is a short description for that
FILE HANDLING IN SAP
Introduction
Files on application server are sequential files.
Files on presentation server / workstation are local files.
A sequential file is also called a dataset.
Handling of Sequential file
Three steps are involved in sequential file handling
OPEN
PROCESS
CLOSE
Here processing of file can be READING a file or WRITING on to a file.
OPEN FILE
Before data can be processed, a file needs to be opened.
After processing file is closed.
Syntax:
OPEN DATASET <file name> FOR {OUTPUT/INPUT/APPENDING}
IN {TEXT/BINARY} MODE
This statement returns SY_SUBRC as 0 for successful opening of file or 8, if unsuccessful.
OUTPUT: Opens the file for writing. If the dataset already exists, this will place the cursor at the start of the dataset, the old contents get deleted at the end of the program or when the CLOSE DATASET is encountered.
INPUT: Opens a file for READ and places the cursor at the beginning of the file.
FOR APPENDING: Opens the file for writing and places the cursor at the end of file. If the file does not exist, it is generated.
BINARY MODE: The READ or TRANSFER will be character wise. Each time n characters are READ or transferred. The next READ or TRANSFER will start from the next character position and not on the next line.
IN TEXT MODE: The READ or TRANSFER will start at the beginning of a new line each time. If for READ, the destination is shorter than the source, it gets truncated. If destination is longer, then it is padded with spaces.
Defaults: If nothing is mentioned, then defaults are FOR INPUT and in BINARY MODE.
PROCESS FILE:
Processing a file involves READing the file or Writing on to file TRANSFER.
TRANSFER Statement
Syntax:
TRANSFER <field> TO <file name>.
<Field> can also be a field string / work area / DDIC structure.
Each transfer statement writes a statement to the dataset. In binary mode, it writes the length of the field to the dataset. In text mode, it writes one line to the dataset.
If the file is not already open, TRANSFER tries to OPEN file FOR OUTPUT (IN BINARY MODE) or using the last OPEN DATASET statement for this file.
IF FILE HANDLING, TRANSFER IS THE ONLY STATEMENT WHICH DOES NOT RETURN SY-SUBRC
READ Statement
Syntax:
READ DATASET <file name> INTO <field>.
<Field> can also be a field string / work area / DDIC structure.
Each READ will get one record from the dataset. In binary mode it reads the length of the field and in text mode it reads each line.
CLOSE FILE:
The program will close all sequential files, which are open at the end of the program. However, it is a good programming practice to explicitly close all the datasets that were opened.
Syntax:
CLOSE DATASET <file name>.
SY-SUBRC will be set to 0 or 8 depending on whether the CLOSE is successful or not.
DELETE FILE:
A dataset can be deleted.
Syntax:
DELETE DATASET <file name>.
SY-SUBRC will be set to 0 or 8 depending on whether the DELETE is successful or not.
Pseudo logic for processing the sequential files:
For reading:
Open dataset for input in a particular mode.
Start DO loop.
Read dataset into a field.
If READ is not successful.
Exit the loop.
Endif.
Do relevant processing for that record.
End the do loop.
Close the dataset.
For writing:
Open dataset for output / Appending in a particular mode.
Populate the field that is to be transferred.
TRANSFER the filed to a dataset.
Close the dataset.
Regards
Anver
if hlped pls mark points

What is data archiving and DMS(Data Management System) in SAP

what is data archiving and DMS(Data Management System) in SAP
Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
Edited by: kishan P on Aug 31, 2010 1:06 PM

Hi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards.

How to make a Infocube as data source and upload data? urgent

Hi all,
I have 2 same InfoCubes, and I want to make the test InfoCube(ZCO_1T) as data source and upload data to another Cube(ZCO_1), Now I has Generated Export DataSource on ZCO_1T and create a update rule between ZCO_1T and ZCO_1. what will I do the next step? Thanks.

hi delve,
once u generate datasource from test cube it acts as an data source for further upload.
now u choose update target3.x in additional functions in context menu of the test cube.
u will get an infopackage pop up with data target to the cube ZCO_1,processing to datatarget only.
selection criterion can bve selected from the first tab.
under schedule tab you can start extraction.
reward points if helpful.

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates

Select Records between Begin Date/Time and End Date/Time

Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
      SELECT * FROM GLPCA
         WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).

Thank you all! I ended up using the following:
SELECT * FROM GLPCA
          WHERE RYEAR IN L_R_RYEAR
            AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
            AND ( ( CPUDT = ENDDATE   AND CPUTM <= ENDTIME )   OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record

UTC Date Time and Normal Date Time

Hi All,
1. How UTC date time and Normal date time differs in siebel.
2. If legacy data needed to be loaded into siebel, in siebel few fields are date time and UTC date time fields. what would happen if we load both normal date time and UTC date time without considering them techinically?
3. UTC date time holds any specific format in physical database? If we want to load legacy data to UTC date time format what is the query to manipulate it?
Thankyou
Sean

Sean,
Please check document below, I believe it has most of the answers to the questions you have:
http://download.oracle.com/docs/cd/E14004_01/books/GlobDep/GlobDepUTC.html
Hope it helps,
Wilson

Master data tables and Transaction data Tables

Hello Gurus,
Please let me know how to know which table belongs to master data and which table belongs to transaction data.
for FICO module.
Does any one have specific material relating to master data table and transaction data tables.
Thanks
Edited by: Manu Rathore on Jan 18, 2012 4:38 AM

Hi Manu,
Find attached table relation diagram by Christopher Solomon. It is one of the very comprehensive chart on this topic.
deleted
Warm regards,
Murukan Arunachalam

TS4040 iTunes payment information won't let me change my credit card and change it without giving me a problem

iTunes payment information won't let me change my credit card and change it without giving me a problem

What happens when you try to make the change?

Difference between Realtime Data Acqisition and Direct Data Access ?

Hi experts,
What is RDA and DDA and whrere these two are used ?
What is the Difference between Realtime Data Acqisition and Direct Data Access?
Please explain me in a detail manner, i will assign points for ur valuable answers..............

Hi,
Eventhough the aim of the two methods are to report on the latest data, there is a difference in both.
In Realtime Data Acqisition you are loading the data into BW and then reporting on that data from BW Infoproviders.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/777e403566c65de10000000a155106/content.htm
I think you are refering to Virtual providers by the term Direct Data Access. In Direct Data Access you are not loading data into BW. Data is residing in R/3 itself. Your reports will fetch data from R/3 directly. The data is called during execution of a query in the source system.
http://help.sap.com/saphelp_nw04s/helpdata/en/23/c0234239f75733e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/13/3e34429692b76be10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/frameset.htm
Hope this helps.
Thanks,
JituK

HT1918 i want to change my credit card details on my account but they say i have to spend the 0.26 pounds on my account. There's nothing i can buy for that money. How can i change my billing details and change to a different country?

i want to change my credit card details on my account but they say i have to spend the 0.26 pounds on my account. There's nothing i can buy for that money. How can i change my billing details and change to a different country?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Lightroom changes file date (build and changeing date) by jpg files

Similar Messages

Maybe you are looking for