Lightroom closes after I open the development module

For several weeks, I have been facing a new incident.
As I am opening the development module, Lightroom closes after a couple of seconds.
This does happen on all versions but 1.0.
If you have a clue..
Vincent

Thank you both very much for the advice.
I downloaded Speedfan and discovered that the graphics card is indeed under some stress at the time of the crashes.
I've also found out that if I close all running programs, it causes less heat so doesn't crash and close.
When I come to upgrading this pc, I'll definitely be making sure a better cooling system is on the list lol.
Once again, thank you. It's much appreciated.

Similar Messages

  • After I use the Develop module in LR4 I edit in PS-CS4, now the develop changes do not show in CS4.

    After I use the Develop module in LR4 I edit in PS-CS4, now the develop module changes do not show in CS4.

    You need to send the file over to CS4 as a PSD (with Lightroom Adjustments checked)
    CS4 cannot interpret the newer processing version used by Lightroom 4

  • Just reinstalled lightroom 5 from CC and the develop module is blocked and says I need to renew membership although I have an up to date photographers CC membership with photoshop CC and lightroom 5 - is there a simple way to reactivate the develop module

    Does anyone know how to reactivate the develop module in Lightroom 5- I've just reinstalled it, restarted computer, signed in but keep getting the message  - Develop module is disabled - Renew membership - although my CC membership is all up to date. I can import to the library etc just seems to be the Develop module- thanks for any help, T

    Solution posted here
    Re: Lightroom 5.5 "Develop Module Disabled, please renew your membership"

  • My photos look terrible in the library module after editing in the develop module.  They look nothing alike.  How do I solve this issue?  Using Lightroom 5.

    anyone have any ideas?  The only way I can get around this is export the photo back into iPhoto and try to edit out the mess.

    The waves you are seeing on your monitor must be more pronounced than what I'm seeing in the posted screenshots. The Library module uses Adobe RGB AND 8-bit JPEG preview images, which can cause banding in fine gradient areas (compared to Develop view), but I'm not seeing a huge difference in your screenshots. Here's a screen shot with my non-wide gamut monitor calibration profile. If my screenshot shows less banding than what you are seeing with the original images it indicates a monitor profile issue as described by twenty-one. A hardware calibrated monitor is recommended to prevent these types of issues.
    The Library image also appears lighter in the shadow area, which probably indicates more Luminance NR needs to be applied or perhaps less sharpening. Try it and see if that helps with the issue.

  • Develop Module Is Disabled. Please Renew Your Subscription To Reactivate The Develop Module.

    Hi
    I have a problem with Lightroom 5.5, has only happened since last upgrade. I open the develop module of LR and the message "Develop module is disabled. Please Renew your subscription to reactivate the develop module" is showing.
    I have tried signing in and out of creative cloud and this makes no difference. Have tried quitting and re-opening.
    Need this problem solved pretty desperately as I have work I really need to edit.
    Please HELP.
    Thanks
    Harry

    Develop module is disabled answer is here

  • After updating to new 2014 updates Lightroom would not go from 'library' to Develop - screen was greyed out with the message saying:- Please renew your membership to reinstate the develop module. My membership is up to date. I then uninstalls Lightroom an

    After updating from CC to new 2014 updates Lightroom would not go from 'Library' to 'Develop' - develop screen was greyed out showing the message 'Develop module is disabled. Please renew your membership to reactivate the Develop module.' Since my membership is fully up to date. I then uninstalled Lightroom 5 and then installed it again. Now when I try to open Lightroom 5 its LOGO flashes onto the screen and then 'crashes' in an instant. Please fix.

    Hi brooks45,
    Please try the steps mentioned in the KB Doc : http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
    Regards,
    Rave

  • I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using

    I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using the crop tool the picture would disappear and only reappear once I closed the tool. Then exposure and White balance changes would change the histogram but not the appearance of the photo. Finally clipping was also not appearing on the picture. I first reuploaded the photos. No effect. Then I reinstalled lightroom. No effect. Help please!

    Try deleting your preferences file
    How do I delete the Lightroom Preferences file? - The Lightroom Queen Help Desk & Members Area - Powered by Kayako Resol…

  • I am running LR 4.4 on a iMac with OS X (Yosemite).  Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes.  It has now happened about

    I am running LR 4.4 on a iMac with OS X (Yosemite).  Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes.  It has now happened about a dozen times.  I have downloaded LR 4.4 from the internet but the problem continues.

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • How do I get the basic panel in the develop module to reappear in Lightroom 5?

    Hello! I was editing a photo in Lightroom 5 the other day, and I thought I hit something, but all of a sudden the basic panel was missing. I went online to see how I can fix it, and what was suggested was to right click on one of the panels and it should have an option that says basic, in order to get the basic panel back. That is what I did, but what it does is just opens and closes the panels. I don't know how to get my basic panel back, I hope I can get some advice.
    Thank You!

    The trick is to right-click on one of the other panel headers, e.g. Tone Curve, and you'll see a context menu allowing you ro reselect the Basic Panel.
    Alternatively, when in the Develop Module simply do Ctrl+1 (Cmd+1 on a Mac), or in the menu bar go to Window>Panels>Basic Panel.

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom

    Friends:
    Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom?  For example I would like to use the shadow, clarity, lens correction and such tools but cannot find them in Photoshop.
    Thanks amigos
    Migs

    The obvious or not so obvious first. Depending on your knowledge. When you open a tiff, jpg, or camera' raw format they can be opened in Adobe Camera raw first which has identicle controls to lightroom's develop module.
    Starting with I beleive CS5 maybe 4, some of the tools made their way into photoshop it self. Take a look at the camera lens filter, the Image>Adjustment menu or the adjustment layers which now support vibrance for example.

  • I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a

    I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a member so why won't it let me go into Develop Module? or any of the other modules?

    The Photoshop LR CC is active but you have not yet activated it. The activation server shows it. Please log out & log back in of the CC desktop CC.
    The Complete CC purchased last year is active till 11th of July. In case after logging out & logging back in does not resolve the issue, please contact Customer support Contact Customer Care
    Regards
    Rajshree

  • When opening develop module get message "Develop Module is deactivated. Please renew your membership to reactivate the Develop Module." I am a Creative Cloud account holder and payments are up to date. What other action can I take?

    Any others suffered the samr problem or know what action to take?

    Hello,
    here some links as an approach to solve your problem:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    even if about Lightroom Help/Doesn't launch after 5.5 update | "Develop module is disabled" error these the instructions could althoug be helpful
    http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
    hans-Günter

  • In Adobe Lightroom, the Develop module is saying "Develop module disabled. Please renew your membership to reactivate the Develop module". I bought this product at full price several months ago.

    The Develop module is saying "Develop module disabled. Please renew your membership to reactivate the Develop module". I bought the product at full price several months ago and have had no problems using it until, so I am not sure what it is asking of me. I only had it on one other computer before I added it to this second computer, and I understand we get 3 copies. There should not be any issues. I need an answer ASAP.. actually pretty shocked that there is no immediate customer service that I can contact for a problem like this.

    If the develop module is disabled then you have downloaded and installed Lightroom from the creative cloud. It cannot be licensed with a serial number. It requires a creative cloud subscription, and is activated and kept active with your Adobe ID and password. That version will not work on your computer and will have to be uninstalled. Then you can install from one of these two links:
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1
    This will have no impact on your catalog or your images. After you install from the right website you will be able to continue where you left off.

  • I have lightroom 5.7 and a macbook pro 10.9.5.  Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work.  There is no "exclamation" icon below the histogram box in the Library

    I have lightroom 5.7 and a macbook pro 10.9.5.  Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work.  There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone.  What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

Maybe you are looking for

  • SSRS 2008 Matrix grouping help

    Hi. I have a requirement to create an SSRS report with a tablix or matrix which looks like the image below. My dataset will hold the following column values: Project name, overall rag, cost rag, scope rag, headline and commentary. The RAG values are

  • How to save the retrieved data in a subscreen...

    Hi, I understand that the subscreen has to be created in transaction se51. However, i dont have any idea how to use it and incorporate it in my main program. Im trying to figure out how to place all the data retrieved in a subscreen where the user ha

  • HT1551 Apple TV Box light blinks rapidly and continously.  What's the problem?

    TThe light on my Apple TV blinks rapidly and continously and does not respond to the remote. What's the problem?

  • Smartform printing copies automatically

    Hi everybody, I need to print 5 copies of a smartform, I'm doing it with a cycle in the Smartform function call and changing a text in the footer, but when the printing is sent the printer tries to take paper from the feeding tray and stops, when I p

  • Late 2013 MacBook Pro Retina 15"-MLB Failure!!!

    very disappointed that I just learned my MacBook Retina Pro lost main logic board after 15 months of ownership.  Symptoms were unresponsive keyboard and trackpad.   Anyone else had this issue?