LightRoom corrupting issue

All of a sudden I'm having weird color issues in LightRoom 5.7.1.  running on Mac Yosemite. 
I'm getting blue and red spots popping up on my images but the raw images are unaffected and I do not see this issue in Photoshop.  Any ideas?Lighr

The reason for this is your have the overexposed and underexposed areas warning on in the histogram. If you look at the histogram you will see the right and left indicators highlighted.
If you click on them it will toggle on and off. The blues indicate areas of total underexposure and the reds totally blown highlights.  

Similar Messages

  • Remote lock & Memory card corrupted issue

    Remote lock & Memory card corrupted issue
    Hi Dear Friends,
    You might have experienced the "Memory card corrupted issue."
    Don't panic! The solution is here!
    Your memory card is just 'locked', it isn't 'corrupted'!
    For sure, this post would be of great help to you, if:
    • You have enabled the "Remote lock" feature of your Nokia device.
    • You have sent the remote lock message to your device and locked it remotely.
    Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
    I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
    Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
    On the contrary, I'm going to explain what may not be mentioned in your user guides.
    Let’s Begin
    What Has Happened:
    In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
    Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
    But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
    So? What to DO?
    1. (This step is optional) Disable the Remote lock feature.
    (Refer to your user guides) and change Allow Remote Lock> to no.
    Then, while the unit is on,
    2. Press the power key briefly, and select Remove memory card.
    3. Remove the memory card from the slot.
    4. Press OK if prompted.
    5. Reinsert the memory card in the slot.
    6. Reopen Menu> Tools> Memory card.
    Is your memory card detected? If yes!
    7. Follow tips number 2 & 3 of What to Know section below.
    Did you get "Password removed" message?
    If no, be careful of the case of the first character.
    If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
    . In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
    Step seven would make the memory card detectable to the connected card reader to the PC too.
    8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
    What to Know?
    Official User guide Tips:
    1. Remote locking also locks your memory card. (E51 page100)
    . Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
    2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
    . Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
    3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
    . Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
    4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
    . Quite interesting, but it contradicts what good E51 says in number three¡!
    . And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
    . The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
    You may like to do a simple search on Google:
    "The first 8 characters are used as the memory card password" site:nokia.com
    Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
    ¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
    But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
    Yours,
    http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

    Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

  • How to deal with corruption issue?

    A couple of months ago after installing Aperture 2, my Imac started slowing down, every program at some time would hang and could not be forced to quit. The machine had to be turned off (control command power) and left off for several minutes. On restart, things would be fine for 1 to several days. It has been to the shop twice with no improvement and I have talked to the experts a couple of time. This is my first mac so I only have a couple of years experience. From all I have read it would seem I have a corruption issue. I set up a troubleshooting account and the computer acts like it did when it was new on that account. Of course I can use none of my data in this account. Where do I go from here, reset preferences, archive and reformat? Please give me some suggestions and directions on how to do it?
    Thanks,
    oldgrandad

    Hi,
    It sounds like it's the same issue I was having. In my experience, as long as important data is backed up, doing an "Erase & Install" from time to time clears out any files/data that is causing your system to run slow (cache files etc). Mine had become painfully slow (I work mainly with images/large files) & was getting a bit frustrating if I was using Aperture & Photoshop etc.
    I also use Techtool Pro to defrag & keep my hard drives in good shape.
    The extra RAM combined with the "cleanse" definitely made a big improvement & all programmes run extremely well now.
    Ben

  • MSI 870A-G54 Blue Screen & Corruption Issues in Windows 7 64-bit

    I am having periodic blue screen and corruption issues in Winodws 7 64-bit with my MSI 870A-G54 system.  I have a Phenom II X2 560 BE processor, 2 4GB DDR 1333 DIMMs (first bank - unganged), 2 2GB DDR3 1333 DIMMs (2nd bank - unganged), 2 Hitachi 1TB 32MB Cache HDD's in a RAID 0 array, two Galaxy PCIe2.0 GT9500's, 550w power supply, internal DVD drive, and 1 1TB Seagate external 3.0 USB drive.  After I load all the supplementary drivers from the MSI site (ensuring I use the 64bit versions), my system becomes unstable.  I even tried the new motherboard chipset drivers from AMD (10.12).  I am running the latest firmware as well (17.7).  The system in not overclocked in any manner and I experience the same results with fail-safe and optimized settings.
    I have tried isolating the issue after loading each driver, but due to the random nature of the issue, I am not having success.  I have also performed memory and CPU tests that report no errors.  Any ideas?
    Thanks for your help...

    What specifications are you referencing that indicate this processor only works with two sticks of RAM?
    My exact specifications are listed below.  Thanks again for your help...
    Component   Manufacturer   Model                             Notes
    Motherboard   MSI                870A-G54   
    Processor   AMD                 Phenom II X2 560 BE   
    Video Card   Galaxy        9500 GT                             PCIe 2.0 - 512MB DDR3
    Video Card   Galaxy        9500 GT                  PCIe 2.0 - 512MB DDR3
    Case                Antec        Three Hundred                ATX
    Power Supply   OCZ                OCZ550FTY                Fata1ty 550w Modular
    Hard Disk Drive   Hitachi                H3D10003272S                SATAII 1TB 32MB Cache
    Hard Disk Drive   Hitachi            H3D10003272S                SATAII 1TB 32MB Cache
    Memory                PNY                MD4096KD3-1333                1 2GB DDR3 1333MHz
    Memory             PNY                MD4096KD3-1333            1 2GB DDR3 1333MHz
    Memory            OCZ                OCZ3G1333LV8GK             1 4GB DDR3 1333MHz
    Memory      OCZ                OCZ3G1333LV8GK               1 4GB DDR3 1333MHz
    DVD Burner   Sony                Optiarc AD-7261S                SATA

  • E4200V2 file corruption issues

    Hello,
    I am getting file corruption issues when doing a file transfer onto the NAS (hard drive plugged into the router). Files are turned into folders while keeping the same filename. It happens occasionally.
    I have firmware: 2.1.39.145204 installed.
    Any remedy for this as it is a very serious problem.

    The only known solution is to call linksys and ask them for a replacement router model that does not contain the bug. See thread link for details.
    http://community.linksys.com/t5/Wireless-Routers/Media-files-changing-to-folder-types/td-p/504192/hi...

  • Lightroom Corrupt Catalog problems- Help!

    Lightroom Corrupt Catalog problems reading/writing from disk when attempting to repair - Help!  I have my LR box in hand and my product keys and license info but can't find the disk. I'm assuming this is the only way to repair.  Suggestions, Comments are welcome and appreciated.
    Thanks in advance!!!

    Corrupt catalog will not be fixed by re-installing the Lightroom software (although if I were you, I'd still find that disk!)
    If I were you, I would first check a recent backup of your catalog file, and see if that will open (double-click on it in your operating system). If that opens properly, I would just use that file.
    If it doesn't open properly, then one trick that sometimes works is to open a blank catalog in Lightroom, then File->Import from Another Catalog and point to the catalog file.
    And if that doesn't work, please write back with a lot more details, including operating system, version of Lightroom, and much more detail abou

  • Lightroom corrupting RAW files? Hardware issue?

    I've started having some issues with RAW files being corrupted when I open them in Lightroom. I've done a lot to troubleshoot and narrow down the symptoms, and here is what I can tell you. If anyone has any ideas for how to solve this, I'd really appreciate it!
    Equipment
    Canon 7D, 1 32GB CF card, 1 4GB CF card
    Lenovo Laptop, Win 8; Lightroom 4
    Dell PC, Win7, Lightroom 5
    Here's what the corruption looks like in my Library view. Note that all of the photos are the same. I just rapid-fired a bunch of shots down the hallway to test this out.
    I first noticed the corruption on the PC, pulling photos from the 32GB card. I bought a new hard drive (SSD hybrid), installed a clean version of Windows 7, and upgraded to Lightroom 5, then the 5.3 update. I re-downloaded some photos from the 32GB card, and they still show up corrupted. So here is my further testing:
    I shot a series of photos like shown above on the 32GB card, downloaded them on the laptop with a new USB cable. The photos look good.
    I shot a series of photos on the 4GB card, downloaded them to the laptop with the same cord, they look good.
    I imported the same photos photos from the 4GB card and from the 32GB card on the PC with my existing Lighrtoom Catalog and they are corrupted.
    I created a new Lightroom Catalog on the PC and downloaded the same photos from the 4GB card and from the 32GB card on the PC and they are corrupted.
    So what gives? I think we can rule out corruption or issues on the hard drive, the OS, the USB cable, and both of the CF cards. It baffles me that a new HD, clean OS install, new catalog, new USB cable, and upgraded Lightroom haven't solved the problem. Is it possible that there is some other part of the hardware on my PC which is corrupting the files?
    I'd love some insight if folks have any ideas!
    Thanks,
    Adam

    Was this ever figured out AdamCohn?  I have a very similar issue.  I have actually watched two photos over the last two days become corrupt while viewing them in Lightroom.  I am not suggesting LR is the cause (as I know this is almost always hardware related) but it has happened right in front of my eyes while LR is interacting with the images (I believe).
    Scenario:
    Images were
    * Imported into LR on different days (about a week apart)
    * Imported to different hard drives during import (one an SSD, another to a typical HDD)
    * Behaving normally in LR until corruption (i.e. previews were built without issue, was able to develop and export images. Showed fine in Finder).
    After viewing the images in Loupe view and watching them flip instantly to a visual mis-mash similar to what you showed the images were permanently screwed.  The appear the same way in Finder and in Photoshop
    I have not noticed any other issues in any other app or area of the system.  Everying seems to be running smoothly.
    Troubleshooting:
    * Memory tests:
      - Built-in Apple memory test (normal + extended).
      - MemTest (as described here: MemTest for Mac OS X Tests your RAM). Ran it twice, all tests passed.
    * I am running some HDD checks now, but with the two images being on two different drives I suspect the likelihood of this being a drive issue is extremely small.
    Suggestions?

  • Lightroom Corrupt Files

    Within the last couple days, I have come across an issue in Lightroom. When transferring photos from PhotoMechanic to Lightroom, the file becomes corrupt. The issue comes when the file is brought into Lightroom (and even Photoshop).
    I have an inkling it is something to do with my computer. I have used multiple memory cards. And tonight following the game, a colleague of mine imported the photos onto his computer through both PhotoMechanic and Lightroom with no issues to any image.
    Equipment:
    Canon 1Dx
    MacBook Pro (Retina, 15-inch, Early 2013)
    Here's what it looks like in my Library view:
    Here is how the file looks in PhotoMechanic (left):
    Lightroom is updated to the latest 5.7 version and Camera Raw is updated to the latest 8.7 version. My colleague, who's computer everything worked correct on, was using the same version of both programs.
    I can rule out that it is not the memory cards, camera body, memory card reader. I feel that it is something within my software or the laptop itself.
    Any help would be appreciated.
    Thank you,
    Brace

    It will not be the software. BTW Photomechanical just uses the jpeg previews in the file not the raw data.
    Are you sure it is not the car reader or cable?? How did you rule this out??
    I would suggest the ram may be faulty or the hard drive is failing but probably ram. Take it to Apple.

  • LR 5.2 corruption issues

    After installing the update, suddenly files are going corrupt- not all in the collection. Can't export, Can't locate. Seems to only happen with the jpegs. Any thoughts? I tested my external drive and it passed. It better too, I just bought it 2 weeks ago.
    Thanks for your help. I am ready to freak out.

    Can't locate is an entirely different issue than corrupt.
    So, perhaps you have two things going on??
    Corrupt files probably indicates a harddrive problem.
    Can't locate means that somehow, the photos have moved or been renamed outside of Lightroom. Can't locate can be fixed via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm. Or in rare cases, I suppose that "can't locate" indicates potentially the same hard drive problem.
    I am having to go back to the raw files, reedit, re save over the damaged file.
    Proper use of Lightroom would mean you would NOT have to go back and re-edit. Normally, you import a RAW file into Lightroom and you leave it imported into Lightroom, you don't delete it from Lightroom, so that Lightroom always retains your edits in its database. Thus, at any point in the future, you could return to Lightroom and view or use your edited photo without having to re-edit the file.

  • Test data corrupted issue while re-opening the Test in PTF8.53

    Hi,
    While re-opening the test case in PTF8.53,there is a pop up message displaying test data is corrupted.
    Ran successfully yesterday,trying to reopen however getting this issue.
    Any solution to retreive it back?

    Actually....iam opening the form from windows xp.Means what? Are u opening in the browser or in the Forms Builder?
    ----in the browser
    when i create a new form in windows xp using developer suite (i have installed developer suite) i am able to connect the database. i checked the tnsping in server its working.....
    This means developer suite has been configured for database.---i configured the developer suite(172.16.7.123) to 9idb(172.16.7.2)
    but i am not able to open the form.What error are u getting when u open the form?
    ---when i open the form in the browser (http://appsworld.ncc.com:7778/forms/frmservlet?config=test)
    its asking me the username,password,database.
    i gave username=ncc password=nccpwd database=test
    In the db server's tnsnames.ora...i have given the db details under test.
    if i do "tnsping test" the result is ok. but when i open the form in the browser im getting the ora-12514 error after giving the above said details of username.
    But....when i give the username,password and database of infrastructure i.e.,
    username=system password=oradba database=orcl then the form is opening in the browser.

  • SocketChannelImpl write data corruption issue

    Hi,
    I am new in working with the SocketChannelImpl class.. In fact java is not my forte.. I come from the C++ world. Recently we ported a socket based communication library originally written in C++ (this lib allows various processes in our App to communicate via sockets) to java to allow integration with an existing java application. We chose to use the same communication library in java to allow seamless application level integration.
    Things works fine mostly except few quirky-ness with data payload integraity when passed between the java based process to C++ based process. This app is running on solaris 10 with mostly latest patchset.
    Here is the typical action doen while communicating:
    - An object at the java process end is encoded in to an ASCII (UTF8/ISO-8859-1) char stream with delimeters like "\t", 0x07, etc. This results in a contiguous char stream.
    - The data is then pushed over the socket to the peer process.
    - The C++ process end then receives the payload and decode the data to recontruct the object with known delimeter, data markers, etc.
    We have not seen any issues with communication between C++ processes, however we have seen that between the java process and any other C++ processes, the payload contents changes for certain locations in the char stream. I have debugged from both the java end and c++ end simulataneously and see that when the char stream raw data (byteBuffer) is pushed out from java side in SocketChannelImpl.write() method, the char stream buffer looks perfectly OK in the byteBuffer, however when the read is done in the C++ process side and when I look at the raw data received, I see that some char sequences have changed!! This obviously causes problems in the C++ side decoding of the raw data.
    Here is the java code that sends the encoded dat (The method receives the raw char stream in the byte array buffer )
    final byte[] tmpBuffer = new byte[size];
    System.arraycopy(buffer, 0, tmpBuffer, 0, size);
    final ByteBuffer socketBufferWrite = ByteBuffer.wrap(tmpBuffer);
    int ErrorLoop = 0;
    final int MAX_LOOP = 100;
    int TotalWritten = 0;
    do {
    result = -1;
    try {
    result = socketCh.write(socketBufferWrite);
    } catch (final IOException ex) {
    trcStalker.logException(ex);
    if (result != -1) {
    TotalWritten += result;
    if (TotalWritten < size) {
    result = -1;
    if (result == -1) {
    ErrorLoop++;
    try {
    Thread.sleep(100 * ((ErrorLoop / (MAX_LOOP)) + 1)); //
    m to catch up
    } catch (final InterruptedException ex) {
    trcStalker.logException(ex);
    } // Wait a bit for the system to catch up
    } while ((result == -1) && (ErrorLoop < MAX_LOOP));
    My question to you would be what can cause the payload to get corrupted on the wire in socketchannelImpl.write() method invocation? I have tried using directAllocated Vs allocated Vs wrapped byteBuffers.. but the result has been same.
    I have not been able to find any pattern of corruption either, i.e. not seeing that the corrupted charactes are increased or decreased by certain number in the charset. However I have seen that certain locations in the buffer always gets changed.
    Any idea in debugging/fixing this issue? This thing is driving me nuts!
    thansk in advance.

    final byte[] tmpBuffer = new byte[size];
    System.arraycopy(buffer, 0, tmpBuffer, 0, size);
    final ByteBuffer socketBufferWrite = ByteBuffer.wrap(tmpBuffer);You can collapse all that to:
    final ByteBuffer socketBufferWrite = ByteBuffer.wrap(buffer, 0, size);
    result = socketCh.write(socketBufferWrite);
    } catch (final IOException ex) {
    trcStalker.logException(ex);
    if (result != -1) {SocketChannel.write() never returns -1. It can return zero if you are in non-blocking mode. Are you? Otherwise it can only return a positive integer. If you get any kind of IOException while writing to the socket the connection has been dropped and you should close the socket and start all over again. Retrying a write after an IOException is just a waste of time.
    if (TotalWritten < size) {
    result = -1;TotalWritten can be anything between 0 or 1 depending on your blocking mode, and 'size'. This is not an error.
    Thread.sleep(100 * ((ErrorLoop / (MAX_LOOP)) + 1));    //What is the purpose of this sleep?
    My question to you would be what can cause the payload to get corrupted on the wire in socketchannelImpl.write() method invocation?Nothing except bad coding at one end or the other.
    I have tried using directAllocated Vs allocated Vs wrapped byteBuffers.. but the result has been same.Have you tried using java.net.Socket? Much simpler.
    I have not been able to find any pattern of corruption either, i.e. not seeing that the corrupted charactes are increased or decreased by certain number in the charset. However I have seen that certain locations in the buffer always gets changed.It could be a disagreement about charsets between the sender and the receiver.

  • External hard drive corruption issues

    Hey folks. Really not sure what the best place would be for my question, but I'll try here.
    I have a 4 year old LaCie external HD with a 160GB capacity. It stores my iPhoto and iTunes libraries for my iBook, along with a few other bits and pieces.
    About a year ago, I noticed some of my files were corrupted and couldn't be played. Whenever I tried to open one of those files, the drive would start knocking and whatever program was trying to access the file would need to be Force Quit. Hoping to solve the issue, I moved the data,(or course, getting stuck on corrupted files along the way) erased and reformatted the drive and moved the data back. Unfortunately, that didn't solve the problem.
    I have the data backed up on another, newer external drive, but I'm wondering if there's a way to isolate the bad sectors in the old drive so they can't be written to anymore? Should I use Disk Utility and repair the disk?
    I know the drive's old and could fail at any time, but I'd like to keep using it as long as possible. Also, when it does finally fail, could I just purchase another hard drive and place it in the enclosure? I suppose I should also note that the FireWire 400 ports don't work on the enclosure. I'm sure it's not a defect, as I accidentally dropped the drive shortly after I'd purchased it. That fall is probably the cause of the corruptions as well =/
    The USB port works fine and I haven't been able to test the FireWire 800.
    Thanks for any advice y'all have!
    ~Lyssa

    Your drive sounds very sick. I am not sure how likely it is but I would be concerned about your OS becoming seriously corrupted and possibly unbootable as a result of continuing to use this bad external drive.
    It would be better if you could test it connected to a non-critical computer.
    Do you know the drive specification? - not the make of the box.
    Many drives self-repair and also communicate likely future difficulties to the OS but eventually you come to the end of this process.
    I am not sure if disk utilities any longer map out bad sectors. Years ago I used a mounting screw that was too long and damaged the magnetic surface. In those days you could manually map out the bad sectors. I then put partitions each side of the mapped out sectors and continued to use the drive for many years.
    More recently I had a drive with an intermittent power connection. However even after repairing this and reformatting the drive was never very reliable.
    Good drives are relatively inexpensive. You could try a new drive in your box. I always advise buying server quality drives normally identified by a 5 year guarantee. I prefer Western Digital but Seagate also make reliable drives.

  • Edit in external editor with lightroom adjustments issue LR5 and PS CC

    Since several days when I try (in Lightroom) 5 to edit an adjusted file (NEF, JPEG or TIFF) in Photoshop CC as external editor (with the option "edit a copy with lightroom adjustments") in many cases the adjustments ar not visible in photoshop CC, or only partial visible, and sometimes the file opens not at all. Removal of the preference files of LR 5 and PS CC and  a whole new installation of LR 5 didn't resolve the issue. I have a macbookPRO with Mac OS 10.8.5 and the most recent versions of LR 5 and PS CC. Has anyone experienced this problem and what can be a solution.

    I have no idea, but have you tried File / Catalog Settings/ General tab: Relaunch and Optimize. Relates to the database.

  • Fixing an 827 with cookie corruption issues

    Hi All,
    I know there are other threads about this issue, but I cant figure this out.
    We have 15 to 20 Cisco 827 routers with corrupt cookies (reading as all 0's).
    I know how to log into priv mode, and know about entering the cookie details.
    What I cant figure out, is how to take the cookie from one of our working 827's as seen here:
    01 01 00 b0 c2 8d 42 fc 3e 00 01 ff 01 ff 00 00
    00 00 00 00 00 00 00 00 4a 41 44 05 51 30 34 42
    42 07 01 00 00 00 00 00 00 ff ff ff 50 06 49 11
    ec 07 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    and use it to answer the questions on the non functional 827 when re-entering its cookie data.
    I tried to enter it value for value, but the end result was the cookie looks different (some values missing, in the wrong place).
    If someone could break down the above cookie into answers for the cookie build questions on a corrupt cookie router.
    Cheers.

    Could you explain how you did this?
    I have a 1711 with the same problem.
    I have at least 10 extra 1711's that I can get the cookie information off of but I'm now sure how to translate it.

  • Lightroom 4 issues

    I have installed the upgrade of lightroom 4 and windows 7 will not open it stating there are compatibility issues. What do I do?

    Did you have 3.x before? Is 3.x still working?
    Did you run the installer as administrator?
    Does LR 4 not even open or when does the error occur exactly?

Maybe you are looking for