Lightroom crashes when trying to export any files

When I try to export retouched files to hard drive files my Mac crashes and has to be force quitted. I thought this maybe a L'room 4 problem so I bought L'room 5 and it's still happening. What can I do?

Thank you very much for your reply.
You say I may not have enough resources and I wondered if I should tell you what I've got.
I'm on an Early 1998 Mac Pro with 2x2.8 GHz quad-core Intel Xeon processors with 2gb of ram.
I'm running it on OSX 10.8.4.
Would more memory help as I can't afford a new Mac.
Chris Hudson

Similar Messages

Photoshop cs3 crashes when trying to open any file

When I purchased CS3 Web Premium it took several months of tooling around to get it to install on Vista HP. Photoshop cs3 worked fine for a few months after installation. It now refuses to open any files - just goes to an eternal spinning icon. When I try to shut it down, it just says not responding. I reinstalled once (takes hours) and it worked for an afternoon. Next morning back to not opening files.
Macine is dell xps M1210, 2Gb Ram, Core 2 T5600 processor, NVIDIA Go 7400 64Mb card.
Help.

Problem (hopefully) solved!
file>open has always been available, but when i select a file and open it is when it hangs. Hitting esc then has no effect.
Tried the reset preferences - still no change.
A friend suggested delete all network printers and voila - it worked! Still keeping fingers and toes crossed every time I use pshop, a little annoying that I have to send files to another machine to print (fortunately I rarely need to print files), and input devices hard to use with everything crossed.
Thanks for suggestions Dave.

Why is illustrator crashing when trying to export .ai file as a .psd

I am trying to export a fairly small .ai file (1mb) to a layered psd file. My computer has over 100gb of memory and during export says startup disk full then crashes illustrator and my file is not exported. I have exported with all rgb settings

Here is an example of what I am trying to create... this brochure shows only the front cover as a single page, same with the back cover...
http://www.thebeardmore.com/conference-brochure/
my document is adding a extra white page next to the front and back cover changing them into spreads...
C:\Users\RBrown\Desktop\1.html
I have read an srticle which says you cant do anything about this... but then how has it been achieved in the example I have found online above?!
Can anyone help me with this please?!?!

Premiere Pro CC crashes when trying to Export Media

I really hope someone can help me with this.
I bought a brand new Dell XPS 15 because I will be studying multimedia production next year. Next week I'm registering for the art school and I'll be able to buy a CC student license. I installed the Creative Cloud Trial Version because I couldn't wait to check out the new features in Photoshop and Premiere Pro. However after working on a Premiere Pro project for several hours, the program crashed when trying the Export>Media function.
As soon as I hit Export>Media in every project I make in Premiere Pro, the following dialog box pops up: "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.". I'm not able to export my project, not even by using the keyboard shortcut Ctrl+M.
I already tried reinstalling Creative Cloud, without any luck. Any idea what could be causing this? I really need this fixed before school starts, so help is much appreciated.
Here are my system specs:
- Intel Core i7-4712HQ processor
- 16GB DDR3L RAM
- Nvidia GeForce GT750M 2GB
- 500GB SSD
Thanks to everyone willing to take a look at my problem.

Hi John,
Thanks for your response. I checked all those links but I'm afraid none of those solves my problem. My GPU drivers are up to date and changing BIOS settings to fixed to disable Nvidia Optimus doesn't work as well.
I checked Windows Event Viewer and the error shows as following:
EventData
Adobe Premiere Pro.exe
8.0.0.169
536f4f89
MSVCR110.dll
11.0.51106.1
5098826e
c0000409
00000000000740c4
21b4
01cf994108252059
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
C:\Windows\SYSTEM32\MSVCR110.dll
a2ad4021-0534-11e4-8260-e82aea8638f9

IPhoto crashing when trying to export pictures

iPhoto crashing when trying to export pictures

Trash the HP Plug in from /Library/Application Support/iPhoto
There are two libraries where this plugin might be
HD/ Library
and
HD/Users/Your Name / Library
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
as well as within the Application package
/Applications/iPhoto.app/Contents/

IDCS3 crashes when trying to Export or PDF

IDCS3 crashes when trying to Export or PDF.
What are the steps I should take to resolve this?
Thanks!

figured it out:
- power off mac and turn back on while holding down Command + R (dont do it on an external keyboard just to be safe)
- choose the re-install Lion option (I'm sure there is another way to re-install Lion, this is just the way I did it, not saying its the best or only method)
- DO NOT INSTALL MACBOOK (Mid 2012) Software Update 1.0 - THIS SCREWS ADOBE UP!

Premier Pro locks up intermittently when trying to export media files

Running Creative Suite 6 Production Premium Win ESD on Windows 7. Premier Pro locks up intermittently when trying to export media files. We have updated all Adobe and Windows software. Error message says PP has encountered a problem and will close. Can anyone help?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Eclipse +flex 3 plugin crashes when trying to see mxml file in design mode

Hi,
I have strange problem I've been struggling with for 3 days.
I have eclipse-jee-europa-fall2-win32(eclipse europa 3.3.1.1)
+ adobe flex 3 eclipse plugin.
My workspace consists of several projects + one library.
There is not problem when trying to edit any mxml file when
my library is not imported yet. Once I import it to my workspace I
cannot see any mxml file in design mode since it crashes with the
following msg in log:
Did anyone have similar problem and maybe knows the
solutiuon? I've reinstalled/redownoaded eclipse, flex plugin, flash
players and so on. What's more it happens only on my machine - same
project on different one works without crushing.
!ENTRY org.eclipse.osgi 2 0 2008-02-22 09:13:18.046
!MESSAGE While loading class
"org.eclipse.mylyn.tasks.ui.TasksUiPlugin", thread
"Thread[main,6,main]" timed out waiting (5000ms) for thread
"Thread[Worker-0,5,main]" to finish starting bundle
"update@plugins/org.eclipse.mylyn.tasks.ui_2.1.0.v20070927-0900.jar
[313]". To avoid deadlock, thread "Thread[main,6,main]" is
proceeding but "org.eclipse.mylyn.tasks.ui.TasksUiPlugin" may not
be fully initialized.
!STACK 0
org.osgi.framework.BundleException: State change in progress
for bundle
"update@plugins/org.eclipse.mylyn.tasks.ui_2.1.0.v20070927-0900.jar"
by thread "Worker-0".
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.beginStateChange(AbstractBundle.j ava:1141)
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:258)
at
org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at
org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
at
org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
at
org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at
org.eclipse.mylyn.context.ui.ContextUiPlugin$5.run(ContextUiPlugin.java:258)
at
org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at
org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
at
org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3659)
at
org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3296)
at
org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at
org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at
org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at
org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at
org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at
org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at
org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at
org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at
org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
Caused by:
org.eclipse.osgi.framework.internal.core.AbstractBundle$BundleStatusException
... 40 more
Root exception:
org.eclipse.osgi.framework.internal.core.AbstractBundle$BundleStatusException
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.beginStateChange(AbstractBundle.j ava:1141)
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:258)
at
org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at
org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
at
org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
at
org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at
org.eclipse.mylyn.context.ui.ContextUiPlugin$5.run(ContextUiPlugin.java:258)
at
org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at
org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
at
org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3659)
at
org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3296)
at
org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at
org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at
org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at
org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at
org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at
org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at
org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at
org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at
org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)

I've found solution by myself so I'll present it here. Maybe
someone will need it.
The problem of such behaviour was that Flex plugin always (at
least on my pc) wants to ustart eclipse using its own JRE from here
C:\Program Files\Adobe\Flex Builder 3 Plug-in\jre (default dir).
This environment is Java 5. When you go to
eclipse>window>preferences>Java>Installed JREs and you
delete default Flex JRE, add new to point to for example C:\Program
Files\Java\jre1.6.0_04 eclipse still uses JRE from C:\Program
Files\Adobe\Flex Builder 3 Plug-in\jre. Do not know why
Flex/eclipse does that but if you simply overwrite C:\Program
Files\Adobe\Flex Builder 3 Plug-in\jre files with newer JRE from
C:\Program Files\Java\jre1.6.0_04 all works perfectly.
Hope it helps somebody ;-)
thanks Artur

INdesign CS3 suddenly crashes when trying to export pdfs

I have exported PDF-x1as from Indesign for years with no issues. Suddenly today, indesign crashes when I select EXPORT. I have indesign CS3 on a macbook pro running 10.5.8.
I work from home, and have to get some pretty huge projects out to the printer, and so I'm getting nervous about this not workling!! I'm trying to remain calm.
I've restarted indesign with the control, option, and shift keys down, supposedly renewing the prefs. When that didn't work, I reinstalled it from my original disks. Still doing the same thing.
Please say someone knows a fix!!!

ok - I've spent countless hours now searching for an answer. I was about to upgrade to snow leopard hoping that would solve this issue, when, buried deep somewhere in these forums, I found the solution that, at least so far, has worked for me! Here it is, in case anyone else is having issues:
http://kb2.adobe.com/cps/402/kb402521.html
phew!!!!

Firefox crashes when trying to attach a file to gmail compose

Vista 32 laptop. When trying to attach a file to a gmail compose, explorer dialog pops up and then firefox crashes. Happens every time, and started (I think) with version 16 or 17. Updated plugins, went through troubleshooting on help menu, tried safe mode. All to no avail. IE works fine.

This report is about the Flash plugin:
*bp-f13d802e-81d7-48fb-b101-ecdd22130310 3/9/2013 8:00 PM
Make sure that you have the latest version of all plugins.
*http://www.mozilla.org/plugincheck/
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
You can check for problems with current Flash plugin versions and try these:
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

After upgrading the OS to 10.6.8, my Skype clashes when open and iMail crashes when trying to attach Pages File !?? What happen?

I just updated my mac book pro to OS 10.6.8 and now my skype crashes after launching and iMail crashes after trying to attached Pages file.
The OS is very unstable !!! what happen ! this is first time i am experiencing this...so sad
What can i do now ? How to trouble shoot ?
thks

Hi Michael,
Thanks for your tips. After I run Disc Utility - Repair Permission...restart my machine and still have the same issues. What next step can i do now ?
Will it be helpful if i send you the Clash reports here ?
Thanks so much for taking your time to advise.

Premiere CC 7.2.2 crashes when trying to export via Media Encoder and Encore crashes while DVD build

Hello,
My computer is a:
2x Intel Xeon Processor E5-2650 (2000 MHz, 20MB);
16x Kingston DIMM 8 GB PC3-8500 ECC Reg.;
PNY Quadro 4000 with 2048 MB GDDR5-RAM;
PNY Tesla C 2075
2x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1x 120 GB OCZ Vertex 3 SSD
1x 240 GB OCZ Vertex 3 SSD (system disk)
Tyan S7050GM4NR motherboard
Windows 7
I freshly installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop and Speedgrade.
When I try to export any video from premiere to the media encoder premiere crashes without any error message. The problem is not the project: I created several new projects and even if I only have one Graphic-File/Bars/h264-video in the timeline that I try to export: premiere crashes. When I export directly from premiere it works, but there is no chance to go via media encoder. The strange thing is that I can export from after effects to the media encoder without any problem...
Second Problem: Encore crashes also. Everytime I try to build a DVD => Encore crashes
Does anybody have an idea?
Here is what I already tried:
Yesterday it worked fine today it crashes when I export from premiere via media encoder.
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. I used Software only renderer => crash
This is the Windows log that I found:
Ereignis-ID 1000
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Premiere CC 7.2.2 crashes when trying to export via Media Encoder

Hello,
My computer is a:
2x Intel Xeon Processor E5-2650 (2000 MHz, 20MB);
16x Kingston DIMM 8 GB PC3-8500 ECC Reg.;
PNY Quadro 4000 with 2048 MB GDDR5-RAM;
PNY Tesla C 2075
2x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1x 120 GB OCZ Vertex 3 SSD
1x 240 GB OCZ Vertex 3 SSD (system disk)
Tyan S7050GM4NR motherboard
Windows 7
I freshly installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop and Speedgrade.
When I try to export any video from premiere to the media encoder premiere crashes without any error message. The problem is not the project: I created several new projects and even if I only have one Photoshop-File in the timeline that I try to export: premiere crashes. When I export directly from premiere it works, but there is no chance to go via media encoder. The strange thing is that I can export from after effects to the media encoder without any problem...
Does anybody have an idea?
Here is the Debug Database File that was created:
AME.EnablePresetDB false false
AME.EncoderHost.NoXMP false false
AME.UseExportProgressCallback true true
AME.amewrapper.donothide false false
AddDebugClipInfoToTimelineTooltips false false
AddTimestampToLogFileNames false false
AddUTCTimestampToTraces false false
AllowDynamicLinkToOwnProjectType false false
AllowMergedClipsToBeOpenedAsSequences false false
AllowSetPositionDuringPlayback false false
AnalysisDataIsAlwaysCompressed false false
AnalysisDataIsNeverCompressed false false
ApplicationLanguage en_US en_US
BE.CompressProjects true true
BE.DisableCS7RelinkUpdate false false
BE.EnableNewSerializer true true
Bravo.defaultLanguage false false
CTPreDefinedEncodingType 13 13
CloseAlwaysTimeoutInSeconds 300 300
CloseIfContentionTimeoutInSeconds 15 15
CodeProfiler_AutoStart false false
CompareMediaNodeRenderers false false
CreateLogFilesThatDoNotExist false false
DLG.DebugRelinkAsync true true
DS.Disable10BitSupport false false
DS.DisablePixelFormatShaders false false
DS.ForceCPUOnly false false
DVA_syncWindowEnablement false false
DisableGPUMediaNode false false
DisableHighQualityAVCHDPlayback false false
DisableNewMediaNodeRenderer false false
DisableSequenceSettingMasterChannelType true true
DisableSpeculativePrefetching false false
DistanceFromLastStateToNeedANewMPEGInfo 20 20
DumpProject false false
DvaMarshalRPCLogging false false
EnableDogEars false false
EnableGPUDebayer true true
EnableRedGPUDebayer false false
ExporterQT.DNxHDNativeSupportEnabled false false
FE.AudioPluginScanOnFirstLaunch true true
FE.PerformanceLogging false false
GF.DisableAcceleratedDisplay false false
GF.DisableAcceleratedRenderer false false
GF.EnableMultipleGPUs true true
GF.EnableNVIDIAOpenCL false false
GF.ProfileKernels false false
GF.SupportCPUDevices false false
HandlerProject.HoverScrubDelay 250 250
IgnoreDirtyState false false
ImporterMXFEnable true true
LinkLocate.Auto true true
LogTimeInTicks true true
MC.AudioRenderer.ComplexityBeforeRender 200 200
MC.BE.AddDocIDOnImport true true
ML.EnableDiskCache false false
ML.LoadTestingPluginsAtStartup false false
ML.SimulateGrowingFiles false false
MPEGDisableMainConceptIndexing false false
MPEGDisableMultipleOpens false false
MZ.DisableMetadataDatabase false false
MaxLogSize 0 0
MinimumDelayBetweenFlushesInSeconds 1 1
Monitor.PlaybackQuality 2 2
Monitor.ScrubbingQuality 2 2
Monitor.StoppedQuality 4 4
NumberOfInstancesBeforeContention 5 5
Player.EnablePerfomanceStatics false false
QE.EnableQEDOM false false
QT.DisableQuickTime32 false false
QT.EnableNativeExports true true
QT32ServerManager.StartupTimeout 30000 30000
REDRocketCompletelyDisabled false false
REDRocketMaximumNumberOfCardsToUse 0 0
ShowExperimentalEffectParameters false false
SuppressPeakFileGeneration false false
TimeWarpFilterEnabled false false
TraceAsync false false
TraceSyslog
WindowMediaPARApproximation true true
assert.enabled false false

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

CS 3 InDesign Crashes when trying to Export To PDF

Our File Problem
Dell Microsoft XP service pack 2
Mac Intel Duo, Tiger
CS3 Fully Updated as of 3/17/08
CS2 Fully Updated as of 3/20/08
The problem first arose back when we upgraded to CS3, we found that files inside our document were crashing InDesign CS3 when we went to print or export the document as a pdf, the file originally made an interchange file which we could work with in CS2 so we went back and avoided CS3 until the catalog was finished.
The problem arose again after we started using CS3 again, but not right away. Many documents have been built and exported and printed with no problem. I was able to find and fix the problem through a piece by piece removal process of elimination. I isolated the problem link, opened it in photoshop, made a new psd file and saved the new file with a different name. Problem solved.
The problem became more complicated recently when I created a document, filled it with links, exported the file, changed nothing but copy in the document went to export and the document crashed InDesign. I then started the process of elimination and found that the problem link was different every time, and when placed into another fresh document would export just fine. All of the links were re-created in photoshop and used to create another document. The document was re created on other machines, everything went well until drop shadows were added into the document, then it crashed InDesign and could not be exported to PDF. We then took the same document, with the drop shadows, exported it in Interchange to CS2 and the document exported just fine to PDF.
As a test on the drop shadow issue, we took a number of different files and tested these in CS2 and CS3 with and without drop shadows. Every file we tried in CS2 worked fine with and without a drop shadow. However ,we experienced a number of crashed of InDesign with the drop shadows on these files in CS3. It seems to be just a portion of images, of a certain type of product we carry, but other than that there is no consistency to what is causing the crash. We also tested other effects and had the same results with InDesign CS3 crashing.
The other issue we see with this is that before the 1st of the year, we were able to export the same images in InDesign with the drop shadows and other effects. It seems that since the first of the year, the same images are not longer able to export from CS3 to a PDF. A couple of the possible thoughts we had were that there was an issue with recent updates in CS3, to test this we are going to uninstall CS3 and reinstall without running updates. We also are going to try to recreate the files that crashed InDesign and see if they can crash again on export.
Has anybody else experienced any similar issues? Does anybody know of a way to identify the problem in CS3 or with our files other than through trial and error? This is a major issue and problem for us since we are primarily a catalog based business and cannot have out catalog crash unexpectedly when we spend months working on it.
This problem is also not operating system specific, it is happening on both machines listed above

Dean,
We found that the issue is a bug in the program, and this was the response i Got from an Adobe guy:
Initial Response:
Thank you very much. Weve been able to reproduce the crash. It appears the underlying bug is triggered by having tall narrow PSD images and transparency effects (i.e. drop shadow). Well be working to further understand the root cause, and then working on a fix for a future release/update.
In the interim the best workaround I can come up with is to rotate the canvas in Photoshop 90 degrees so the image is short and wide, and then rotate it -90 degrees in InDesign after placing so you get the vertical orientation you want. The bug is triggered when processing the data as saved by Photoshop, so avoiding the tall and narrow psd should avoid the bug.
Im sorry to not have an easier workaround or immediate fix. Please let me know if you encounter any new crashes. Ill let you know if our further investigation changes our understanding of the root cause of the bug.
Second response:
Well, I have a bit more info. Switching from a tall narrow image size to a short and wide one should avoid the crash for any specific image that crashed when tall and narrow, but unfortunately the root cause of the bug is in code that could potentially be triggered by any image. It appears to be exceptionally rare for other image proportions, but it is still theoretically possible. It just turns out its much more likely for a tall narrow CMYK+Alpha image.
So, as it stands I dont have a 100% guaranteed way to avoid this crash, but it should be much less common for short and wide images. If you do encounter the crash, switching the orientation should avoid the crash. Hopefully the orientation workaround will allow you to be productive with InDesign until a future release contains the fix.
Hope that helps

Why is Premiere getting an error when trying to export .MXF files?

Hello!
I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
The next time, it crashed right away with over 2 hours still remaining.
So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
Thanks in advance for any and all help!

If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

Lightroom crashes when trying to export any files

Similar Messages

Maybe you are looking for