Lightroom crashing during 'move file' and other processor-intensive operations

Hi Everyone
I've been using various versions of Lightroom on my Mac for many years without issue. I love the program. Recently though, when using the last iteration of Lightroom 3 I began to experience problems when performaning processor-intensive work. For example, my library has nearly 200K images, and these are organized into hundreds of folders (bird species), each folder containing from 1 to up to 14K images. My workflow is to bring in the photos, rename them, and then shift them over into these species folders. For me it's an easier and faster way to get my hands on specific images than using tags. In any case, when I try to move images between folders lately, Lightroom slows down and eventually crashes. It also crashes the other apps running on my Mac at the time (usually just a web browser). I get the gray screen of death and have to reboot the Mac. Start over and after a few minutes of work it happens again.
Today I upgraded to Lightroom 4.3 hoping that might solve the problem, but I experienced the same crash behavior tonight while shifting some photos around. The Mac is a Macbook pro, recent model with latest OS and with 16GB RAM. I don't experience problems like this with any other application, but Lightroom is now bringing my computer to its knees! I even took the Mac into the Apple store and had the full diagnostics run and they found no problems internally. I keep my photos on external drives connected by firewire. Another potential wrinkle: Lightroom doesn't seem to be able to find a few of my previously imported images even though the directory is looking for them in the right folder. I get a "File offline or missing" issue. I tried pointing the folder to a new location (the same one) but that didn't work. Oddly, it does seem to find others.
In any case, any help here would be much appreciated. I have a feeling that my catalog might be corrupted and may be causing these problems, but I'm uncertain how to tell.
Thanks
Brian

You seem to have enough resources in your MacBook Pro to run Lr smoothly. Your catalog is not corrupted, or Lr would not open it.
When was the last time you ran <Optimize catalog> (>File >Optimize Catalog)? When was the last time you made a catalog backup from within Lr (your Mac backups don't count here). From within Lr because optimization of the catalog and of the previews is part of the backup from within Lr while your Mac backup doesn't optimize anything - it just copies.
The problems you are experiencing might also be caused by a drive that is nearly full, i.e. 80% or more. Usually the free space is not one big "empty stretch" but is distributed in small chunks. So when you try to move lots of images "in one fell swoop", Lr has trouble finding space to "park" images (a) for the moment, and (b) permanently.
Since you seem to move your images often, your drive might also be highly fragmented - although - if I remember correctly - defragmentation is not necessary on a Mac.
Finally, moving images between folders is not one of the strengths of Lr. It is known that - during a move - Lr sometimes "drops" images, i.e. they disappear from the computer to be never seen again. Also, Lr might loose the link to the image, indicate that the file is missing, and when you try to re-link them it says that this file is referenced with another image. You say that this is happening to you.
Therefore I would strongly recommend that you change your image organization to a workflow that is more conducive to Lr, i.e. organization by keywords and Collections.
You still can have folders, but constantly moving images between folders is not a good practice - as you are experiencing now.
And, the fact that you find it necessary to shift images between folders indicates clearly that organization by folders is not satisfactory. The reason is: an image can only be in one (1) folder (either in the petrel folder or in the shearwater folder) - but an image can have multiple keywords and can be in multiple collections.

Similar Messages

Can I store Movie files and other data on my Zen Xt

My PC HD is full of movie files and I want to free up some space. Can I move these files onto my 60GB Zen Xtra?

When transfering large files with the MTP firmware make sure you have the patch from Microsoft otherwise the file will not transfer back from the player to the computer.
Get it here:
<a href='http://support.microsoft.com/default.aspx?scid=kb;en-us;89536' target=_blank>http://support.microsoft.com/default.aspx?scid=kb;en-us;89536[/url]

I have uploaded files in the cloud but they do not seem to open. (Movie files and other content)

I uploaded content to the cloud without any problems or issues. (GREAT NEWS!) However the content appears as a gray box and does not open or do anything when you click on it. Can you help me? It looks like it uploaded completely but I am not sure how to access it or get it to open.
Thanks!
Cory

Hi David,
Thanks for responding! Yes they are files I created in Articulate and
MSWMM- Microsoft Movie files. I still have both but was basically thinking
when I sent the link they could log in and see the file. It looks like they
would actually have to download it to open and view the materials. Is that
correct? Is there some other way to share the content?
Thanks again!
Cory

Lightroom crashed EVERY SINGLE file and photograph is gone! There is a file on my screen bearing the title of what I was looking at prior to the crash, but says, "DATA". What IS that and where did all of my stuuf go??

A few nights ago a message appeared in Lightroom, but before I could read it, it shut down. Yesterday, I opened it up again to resume with my assignment and it said my files were damaged. On the third try I got my work and all went well. Today as I was looking at my newest images and flagging them, Lightroom shut down 'again'. This time it took every saved file and photograph. I noticed a weird file on my monitor screen thereafter, "DATA........Irdata. What is that? If this is where everything is, how do I get it back....and into Lightroom? What is happening?

Could you post a screen capture of your (User name)> My Pictures> Lightroom folder. Like the posted screen capture.

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

Today My c: drive crashed...i had all my oracle database files and others in other resp drives.How to start by DB again as my services are destroyed.?!

Today My c: drive crashed...i had all my oracle database files and others in other resp drives.How to start by DB again as my services are destroyed.?!
or how to create a service for the database i had previously ??
any help
Aravind.

AravindanJ wrote:
Today My c: drive crashed...i had all my oracle database files and others in other resp drives.How to start by DB again as my services are destroyed.?!
or how to create a service for the database i had previously ??
any help
Aravind.
Where did Oracle software reside before the failure & now?
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002

Yosemite finder crashes with previewig .txt and other files

Hello,
under Yosemite the Finder crashes with previewig .txt and other files.
Is this just my problem? Help please.
Thank you very much.
Regards.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

What can I do to improve a blurry quicktime video that was SMS'd to me it is a 1.24MB .mov file and I have QuicktimePro. It was taken on an Iphone but I am not sure with what software.

What can I do to improve a blurry Quicktime video that was SMS' texted to me? I think it was taken on an Iphone and it was sent to me as a 1.24MB .mov file and I have Quicktime Pro if that helps. I REALLY need to make this as clear as possible, the audio is good, video is blurry. Here is some additional data:

anything I can even try? Sender is off the grid? I don't need a production ready copy just viewable?
You can rescale (stretch) the size of the display but this will only make it blurier and/or introduce pixellation. When the file was encoded at a lower resolution much of the original data was thrown away to make the file smaller. This data is gone/missing and cannot be recreated from what is left. What you've got is all you have to work with. Any filters you can apply will require re-compressing the file again which will likely introduce more artifacts and increase the size of the file without really improving its overasll quality.

My complaints and Questions MP4 M4V video files and other complaints

My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, James

Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?
I created project in iMovie then exported it to MP4 and also MOV file at highest definition possible + I added it to iDVD and had a number issues about encoding errors regarding the mp4 file. MOV worked but the quality was terrible.....
MOV file is as follows:
4.08GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1920 x 1080
Duration: 12:33
Audio Channels: 2
MP4 File is as follows:
3.02GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1280 x 720
Duration: 12:33
Audio Channels: 6
I have a MacBook Pro using the Yosemite system upgrade.
I have updated iDVD and iMovie.
I even bought the iSkysoft app from the mac store and that was terrible too.
PLEASE HELP i am getting desperate and about to launch this macbook into the air
2.66 GHz Intel Core i7
Version 10.10. 2

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

My iphone crashed during the update and now it wont recover.

My iphone crashed during the update and now it wont recover. I keep getting a message say " an iphone has been found thats in recovery mode, please restore it and update."
Every time that i try to restore it, is stops with a couple of minutes left and gives me the same message.
can anyone help?

How many times have you tried...?
Some Users have reported that as many as 8 or 9 attempts were necessary before success.
See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps...

Songs show up as "QuickTime movie file" and won't share or sync

I have a few mp3 audio files in iTunes that aren't being transferred to my iPod (3G) and aren't showing up when I share my iTunes library to another computer, and I can't figure out why.
The filenames have ".mp3" extensions. When I do a 'Get Info' on them in the Finder, they're identified as "MP3 Audio File". Running 'file' on them from a Terminal window says "MP3 file with ID3 version 2.2.0 tag". They play just fine in iTunes as well as in QuickTime Player.
But when I do a 'Get Info' on them from within iTunes, iTunes says each one is a "QuickTime movie file". And when I access this computer's shared music from iTunes on another computer on my network, everything shows up except these tracks; and when I sync my iPod, everything shows up except these tracks. I don't get any error messages.
Why does iTunes think these songs are movie files, and how do I correct it?
G5/1.8 Single Mac OS X (10.4.8)

These files have the wrong creator.
You can correct this by running the script on this web page.
The page also contains information about avoiding this in the future.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.1

HT1449 Can I just move my movie files and leave my music files where they are?

Can I just move my movie files and leave my music files where they are?

Yes, but bear in mind if you move the movie files, any files, from the iTunes media folder iTunes will not know where they are and therefore cannot access them. It will be up to you to tell iTunes were they are in order to use the files.

Use Automator to move files and folder structure to another folder, retaining destination contents

I have been struggling trying to setup Automator to move files and folder structure to another folder, retaining the destination contents. Basically, I need to add files at the destination, within the same folder structure that exists at the source. Here's some details about the scenario:
-I have PDF files that I create on a seperate computer than I my daily use machine
-For security reasons, the source computer doesn't have access to any shares on the destination computer
-The destination computer has access to shares on the source computer
-I want to delete the original PDFs at the source after they are moved or copied
I haven't been able to get Automator to move or copy the folder contents (files and subfolders) without dropping everything copied at the top level of the destination, resulting in many duplicate folders and a broken folder structure.
So far I've only had luck getting this to work at the command line, but I'd really like to have this setup in Automator so that I could have either a service or application that I could use for any folder, prompting for the source and destination folders. I'm a relatively new Mac user with limited Linux experience, so this is the command that I've cobbled together and currently accomplishes what I'm looking for:
ditto /Volumes/SMB_Temp/SOURCE ~/Desktop/Documents/DESTINATION
cd /Volumes/SMB_Temp/SOURCE
find . -type f -name "*.pdf" -exec rm -f {} \;
Thanks for any ideas!

If you have a command-line syntax that works, why not just create an Automator workflow with a single 'Utilities -> Run Shell Script' action, where that action has your (working) shell commands?
Seems way, way simpler to me than trying to reinvent the wheel and transcribe shell commands into individual Automator actions

Lightroom crashing during 'move file' and other processor-intensive operations

Similar Messages

Maybe you are looking for