Lightroom displays different colors in 4.1 and after update

Hello Community
I Had LR 4.1 recently for about a year. Everything worked fine. Until now. Due to graphic card repair, I was forced to reinstall Windows. But before - I produced some DNG's for future use.
After reinstalling W7, I run LR 4.4 and imported my DNG's. It was strange, but they appeared different than I expected - were less saturated and bad looking at all. But the strange thing is - after exporting them as jpegs - they looked fine in external apps (Irfan View, Chrome, etc.), importing them as jpegs back to LR didn't help - Lightroom displayed them badly.
The first thing I did was installing back the 4.1 version - everything was fine here in both LR and external apps - completely identical pics.
I did test LR 4.2, 4.3, 4.4, 5.0b - all of them failed in proper images displaying.
What causes such weird situation ?
I also remember - some time ago I reported in this community - similar situation - after upgrade 3.4-3.6 - exactly the same problem. I moved back to 3.4 - and forgot about problem.
Can anybody help me ? I was going to buy LR5, but if beta has the same issue, I won't do it.
My system is:
HP laptop DV3-4050ez
i7-720qm
8GB RAM
ATI Radeon 5400 series
500GB 7200rpm

Hello,
I had this problem as well - the upload to Blurb would not work. Creation of a PDF and export as JPEG in the book module worked.
For me, the solution was to turn off the Windows Firewall while uploading. Now it works!
Two-in-Love (Photographe de Mariage en Suisse Romande)
http://www.two-in-love.ch

Similar Messages

  • Need to display different colors for Actuals and forecasting values in WAD

    Hi Gurus,
    My requirement in the report is, I need to display different colors for particular values like Actuals(say value type 10) and for forecasting values(say value type 20) , and data will uploaded from flat file.
    Scenario : If I upload the data for March Month, I receive actual values upto March(Jan to March month) and from April to Dec(Forecast values with value type 20),  Every month I will be getting file and similarly for subsequent months, i will get current month actual values and forwarding months forecasting values,
    Now , my requirement is, When ever i execute the Report, Say if i execute for April Month, Upto April( Jan to April for actual values should be displayed in one color) and from May to Dec ( forecast values should be displayed in different color).
    I had tried with following options like exceptions and could not display , as it runs based on key figure values where as my requiremnet is based on the CALMONTH , i need to show different colors for both actual and forecast values.
    Kindly, help me out from this,
    Thanks

    Hi,
    it is not necesseary that you need to do that in WAD , you can do the same in BEx platform, Since WAD is build above the bex reports. so automatially any changes done in Report will be replicated in WAD
    Go for Exceptions in Bex. Give some range for Actuals and Forcasting at the creation of the exception.
    if you do those changes in BEX automatically it will replicate in the WAD.
    for more information please read this link
    http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
    hope this will solve your problem.
    Santosh

  • Before update and after Update trigger

    Hi,
    I am following the below approach to overcome ORA-04091: table XXXX is mutating error.
    1. In the after update row level trigger i am capturing rowids of changed rows into a table type (of type rowid) defined in a package.
    2. In the after update statement level trigger i am using the data from the table type ( that got populated in the first step) to do my work.
    3. In the before update statement level trigger i am resetting the table type defined in the package.
    Now, can the below situation occur causing the system to fail
    1. A Update to the table occurred causing the before update statement level trigger to fire and reset the table type.
    2. After that row level after update trigger gets executed and captures the required data.
    3. Now before the after update statement level trigger gets executed a new update to the table happened ( to some other row as multiple users are using the application) causing the
    before update statement level to fire and erase the data from the table type?
    I want to know if above situation can occur or is the execution or before and after update triggers atomic?
    Thanks for helping.
    TIA
    Harsha

    A collection in a package is local to the session. And a given session can be processing one SQL statement at a time. So any concurrent updates would be happening in a different session with a different logical collection.
    You may encounter problems if your session is trying to update the same rows that other sessions are trying to update (whether via the original update statement or via the updates issued by the trigger). You could encounter performance problems because of row level locks or you could encounter deadlocks. But your session's collection won't be initialized by some other session's actions (other than DDL that replaced the package itself).
    Justin

  • I have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i cannot even restore it. does anyone know what to do?

    i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?

    I have had this same issue but thankfully fixed it. Follow he steps below:
    Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
    Go to Settings > Reset > Erase All Content and Settings
    Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
    After everything has sync'd back to your phone everything should work fine.
    Hope this helps.

  • HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

    I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

    "I did make a full back up of my phone prior to updating the iOS"
    Itunes content is not incliuded in the backup that itunes performs.
    Audiobooks are not part of icloud and cannot be redownloaded.
    You can try contacting itunes support and asking for an exception.

  • Repairing permissions before and after updating software

    What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

    This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
    I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
    Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
    Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
    But, to each his own.
    HTH
    TiPB 867   Mac OS X (10.4.6)  

  • Oracle Alert: Access before and after update values of a table column

    We have a requirement where a notification needs to be sent when 'END_DATE' attribute (column in a table X) is set, in an Oracle Applications form.
    I have defined an Event based Oracle Alert which fires 'On Update' of the table X.
    Could anyone please let me know as how to access the value of 'END_DATE' before and after update (i.e :new.END_DATE and :old.END_DATE) in the sql query of the alert.
    The need to use the before update and after update values of the attribute 'END_DATE' is that if we add the condition END_DATE is not null, the alert is sent even if any other attrbutes are updated in the Oracle form which is not the intended behavior.
    Appreciate any help.
    Thanks

    Hi
    use selectionlistener for your first table then add clientlistener and serverlistener so that you will get the rows on click in back bean.
    then get second table vo and and create and add row for that view object. add partial target to refresh your second table from back bean.
    on click of save call commit operation.

  • I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up pictures

    I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.

    If you backed up the device, all the data is in the backup. Restore the backup.
    A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used?

  • I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

    I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

    http://support.apple.com/kb/HT5818:
    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.

  • Triggers before and after update

    Hi
    I would like to add triggers before and after update for the following code. I would be thankful if someone give some guidance
    update per_all_people_f a
    set start_date = (select min(effective_start_date)
    from per_all_people_f a1
    where a1.person_id = a.person_id)
    where person_id in (1114,115);Thanks
    anna

    Hi
    I was unable to answer you. I agree with Peter . Also i want to add
    that in HRMS you should check what triggers are already on that table and be carefull with creating your own one. With your own trigger you can influence on some application logic you know.
    ( And i hope that is a table first of all :) - but as i know _F at the end of table name means table  )
    T

  • HT4623 I have an Iphone 4s factory unlocked. I got At&t again and after updating to iOS 6.0 my iphone its not working propertly.

    I have an Iphone 4s factory unlocked. I got At&t again and after updating to iOS 6.0 my iphone its not working propertly. I dont have the carriers option nor Im able to face time using cellular data. Any suggestions!?

    Do you have an AT&T carrier file number showing? The only time you can use Facetime on AT&T cellular is if you are using one of their Shared Data plans. While they have not locked your phone, it appears their carrier file is in control of your device when you have the AT&T SIM card in there.

  • I updated my iphone 4  4.3.3 and after updating my phone  id not opening

    i updated my iphone 4 version 4.3.3 and after updating its not opening
    plz tell me what to do

    YOu can get all your pictures back by restoring from your backup http://support.apple.com/kb/HT1766  assuming you have one, if not then your pictures are gone.

  • Hi , I use Iphone 3g and after update of Facebook i can't use it.Please help

    Hi , I use Iphone 3g and after update of Facebook i can't use it.Please help

    If you still have the old version on you computer, then delete the app and resync it. the new facebook is compatible with iOS4.3 or later and you cannot get beyong 4.2.1

  • Temperature very high and batterilife too short after installing mountain lion, and after updating 10.8.2

    i have a 15-inch, Late 2011 macbook pro and i have this problem : temperature very high and batterilife too short after installing mountain lion, and after updating 10.8.2, i dont know what to do, im only using safari and the fan are runing veri high because of the temperature

    Same here and no any answers

  • I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

    I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

    Have you went to Bose"s support site?
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

Maybe you are looking for