Lightroom does not create a background layer when editing in Photoshop - on Mac.

Thought this was a Photoshop problem. When I select a portion of an image in Photoshop (which has come from Lightroom) and press Delete, it no longer brings up the Fill dialog; it just deletes the pixels.
After some discussion on the Photoshop forum, I see that now, when I tell Lightroom "Edit in Photoshop", it creates a file which does not have a Background layer, and this causes the Delete key to act differently. This was not the case several weeks ago, but has just started to happen. Is there any adjustment I can make to the "Edit In" settings to get a Background layer in Photoshop?
JK

You must have changed a setting in Photoshop because Lr has no influence on how Photoshop treats the background layer.
There is nothing you can do in Lr to change this behavior of Photoshop.
What happens in Photoshop is this: For some reason the image is opened with transparent background.Such an image does not have a background layer and the layer at the bottom does not have the constraints of a regular background layer.
I am not aware of any command or script in Photoshop that would automatically do this on opening a file.
Try this: Reset your Workspace (>Window >Workspace). If that doesn't help I'd suggest to ask on the Photoshop forum why your Photoshop opens an image with transparent background.
You could also try to re-install Photoshop, supposedly this would reset any hidden settings that are causing this.

Similar Messages

Narration does not stay with video clips when editing

I have been working on a large video project in PE7. I just finished adding approximately 100 narrations at various points in various clips. I then inserted a video clip that was missing and all the narrations seems to have shifted and are no longer in sync with the video clips. Any suggestions before and go to the timeline and move each clip?

If you inserted a clip, the timeline is designed to "ripple" or move over to allow for the clip.
If you don't want the timeline to ripple as you add new clips, hold down the Ctrl key as you add your clips.

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Return key not creating a new line when using the horizontal text tool

Going through the adobe after effects 'classroom in a book' examples - when writing a line of single line using the horizontal text tool pressing return does not create the next line underneath, the cursor stays on the same line?
Anybody out there had this problem?

Hi Bill
Thanks for replying!
My OS is windows 7. I think it is the first time I have needed to put more than one line of text in an after effects layer. I am new to CS5.5 - after effects and I'm going through an adobe tutorial 'classroom in a book' series book.
I thought about using a paragraph text box as you suggest but could not find the function in the tools menu.
I have since tried clearing the cache out and restoring default layout but with no joy.
I have used the return key for multiple line text in premier pro and it works perfectly ok.
Cheers,
Alan

Lightroom does not display imported folders in correct location

Hello,
OS X Yosemite 10.10.1
Lightroom 5.7
In Lightroom, I try to import photos and store them in a folder named by date. All import settings are configured in such a way that Lightroom indicates that my photos will be imported as I want them to be.
Lightroom creates the folder in the correct location on disk.
However Lightroom does not display the newly created folder in the correct location after import, instead it adds the folders to the top level of my catalogue.
I've triedimporting from both from my cameras card and from a local folder, the results are the same for both methods.
Does anyone know why this is happening or do you have any tips on how I can trouble shoot this issue?
Something that may be related to this issue... while in Lightroom, if I right click the top level folder and click "Synchronize folder", Lightroom displays a dialog box indicating that there are new photos and missing photos...
"Import new photos (7934)
Remove missing photos from catalog (7931).
I have been importing photos in the same way for years. I have have upgraded Lightroom once, and I have swapped computers once.

This problem most likely occurs when there has been a case change in a path on disk. In other words (using the screenshot at the top of this post as an example), something like this:
/Users/hurley/Pictures/photographs
intentionally or unintentionally gets changed to:
/Users/hurley/Pictures/Photographs
(i.e., "photographs" was initially lowercase, but got changed to an uppercase "Photographs")
As you've discovered, Lightroom does not handle this well. You can fix the problem by completely changing the path, and then updating Lightroom with the new path. Try these steps:
1. Quit Lightroom.
2. In the Finder (i.e., on disk, not in Lightroom), alter the path that your photos are stored at. In other words (again using the screenshot at the top of this post as an example), create a new folder called "Test" inside the "Pictures" folder, and then put the "Photographs" folder inside the "Test" folder, so that the new path looks like this:
/Users/hurley/Pictures/Test/Photographs
4. Launch Lightroom. In the Folders panel in Lightroom, you should now see a question mark “?” on the “photographs” folder (and all the folders within it) because Lightroom doesn't know where they are any more.
5. Right-click on the “photographs” folder in the Folders panel in Lightroom, and choose “Find Missing Folder…” Direct Lightroom to the new location of the folder, i.e., /Users/hurley/Pictures/Test/Photographs. The folder, and the folders within it, should now be found, and the question marks should disappear from them in the Folders panel in Lightroom.
6. Now try importing again to see if the newly imported photos go into the right place.
-Ben

SUBMIT does not work in background...

Hi guys,
We have a copy program of a standard transaction and once we use this copy program in the main program via SUBMIT... it does not work in background...
Why is this so,,, Please advice...
THanks!

Hi,
When executing some program using the statement like SUBMIT prog_2 WITH parameters and RETURN.
In foreground PROG_2 is executed, and once you click on the BACK button the code written after this SUBMIT statement will be executed.
If you are executing the same in the BACKGROUND mode, no feasibility of clicking on BACK button, hence control will remain in the PROG_2 only after executing its logic.
Please code accordingly.

Applet does not load on app server when Free Design Layout

Hi,
I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
As shown in the tuorial:
[http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
3. Then I a webpage I "embeded" the applet.
4. I run the web app and the applet gets loaded and everything is just fine.
But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
But!
When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<</u>
Thanks for all your replies.
Cheers.
Edited by: arijit_datta on May 15, 2008 4:07 PM

Solved.
Here is the solution:
[http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
Cheers..
Edited by: arijit_datta on May 16, 2008 7:41 AM

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

GUI_DOWNLOAD does not work for background printing

Hi,
Need some help urgently.
Function moduel GUI_DOWNLOAD does not work for background printing. I want to know how this issue can be handled or we have to use some other function module.
We are using this in a report and i get the error dump OBJECTS_OBJREF_NOT_ASSIGNED when we run this report in background.
Kindly suggest.
Best Regards,
Abbasi

you can not use gui_download in background.
Try searching first, this thing has been posted a thousand times already

Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File

This was working in the previous release. After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file. Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
Report created:
7/9/2014 1:54:12 AM
Project name: highup.aep
Source files collected to:
P:\temp\highup folder
Source files collected: All
Collected comps:
Thomas Falke - High Again High On Emotion)
Number of collected files: 1
Size of collected files: 63.4 MB
Collected source files:
C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
Rendering plug-ins:
Classic 3D
Effects used: 1
Effect: Detail-preserving Upscale

The dialog box has been slightly refactored. You must click "Allow watch folder rendering" and then all is good. Hope this helps anyone else. Thanks to Rafil at customer support chat for this.

SQLJ Translation does not create profile file

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

Need to create a sales order that does not create demand

Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SM

Hello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak

Does SAP create missing files TRACExx when starting up?

Hi there,
I'm working on a documentation regarding a system copy from a productive system to a consolidation system.
We're using Sun Solaris 10/64Bit with Oracle 10g2 and Netweaver 7.00.
In the directory /usr/sap/<SID>/DVEBMGS_xx/log there are several files SAP uses:
- ALALERTS
- ALMTTREE
- ALPERFHI
- ENQBCK
- SLOGxx
- TRACE
- TRACE00...TRACE07
My question concerns the TRACE-files. Only the file TRACE seems to be used by the consolidation system, but there are still eight files TRACE00 up to TRACE07 that were last accessed in 2008 and before.
These files are filled with data from former consolidation systems that got overwritten everytime by the system copy. Now, after the new copy, the SAP system is still down. May I delete these files? Does SAP create these files new when starting up?
Greetz, Uwe.

Hi,
Yes you can delete those files at any time. Check SAP Note 16513, it may help you.
Thanks,
Sushil

Server does not create ois ?

Hi folks !
At first I wanted to send some Strings via the Client to the Server and print them onto the screen. On a specific String "antwort" I would like to send an Object k from the Server to the Client and prove on the Client the correctness of the object by reading the attribute set on the serverside before sending.
But somehow the server does not create the ObjectInputStreams and I don�t know why.
That�s the code:
// Server:
public class Server {
public Server() {
try{
String input = new String();
ServerSocket sock = new ServerSocket(16348);
Socket socket = sock.accept();
System.out.println("socket"); // this line is printed on connection
ObjectInputStream sockin = new ObjectInputStream(socket.getInputStream());
System.out.println("objectinputstream"); // but this one never appears
ObjectOutputStream sockout = new ObjectOutputStream(socket.getOutputStream());
Kunde k = new Kunde();
k.setNummer(13);
while(!input.equals("Ende")){
input = sockin.readObject().toString();
if(input.equals("antwort")){
sockout.writeObject(k);
sockout.flush();
sockout.reset();
System.out.println(input);
socket.close();
catch(Exception e){
public static void main(String[] args) {
// TODO code application logic here
new Server();
// The Client
public class Client {
public Client() {
try{
Socket sock = new Socket("localhost",16348);
// System.out.println(sock.isOutputShutdown());
sock.setSoTimeout(5000);
System.out.println("socket hergestellt");
ObjectInputStream sockin = new ObjectInputStream(sock.getInputStream());
System.out.println("sockin");
ObjectOutputStream sockout = new ObjectOutputStream(sock.getOutputStream());
System.out.println("sockout");
String eing = "";
System.out.println("vor while");
while(!eing.equals("close")){
eing = erwarteEingabe();
System.out.println("Sende:"+eing);
if(eing.equals("antwort")){
sockout.writeObject(eing);
Kunde k = (Kunde)sockin.readObject();
System.out.println("Nummer des Kunden: "+k.getNr());
else{
sockout.writeObject(eing);
sockout.flush();
sockout.reset();
catch(Exception e){
System.out.println(e);
public static void main(String[] args) {
// TODO code application logic here
new Client();
private String erwarteEingabe(){
String eing = "";
System.out.println("nehme Eing entgegen");
try{
BufferedReader b = new BufferedReader(new InputStreamReader(System.in));
return b.readLine();
catch(Exception e){
System.out.println(e);
return "";
}

When you create an ObjectInputStream it tries to read the object stream header from the underlaying stream. In this case both your server and client are waiting for the other one to send the header before they can continue. This problem can be avoided by simply creating the object output streams first:ObjectOutputStream sockout = new ObjectOutputStream(socket.getOutputStream());
ObjectInputStream sockin = new ObjectInputStream(socket.getInputStream());

Lightroom does not create a background layer when editing in Photoshop - on Mac.

Similar Messages

Maybe you are looking for