Lightroom does not import my images from 70d camera sd card when there is video on it

I am attempting to import images into Lightroom 5 from a wedding that was shot on a 70d canon camera and recorded to an sd memory card. There are also two short videos (less than 2 minutes each) on the card. Lightroom acts as if it is importing with the progress bar showing but it just hangs there and nothing gets imported. I even tried unchecking the two videos but still nothing. I had no trouble importing images when I didn't have any videos on the card.

I have the very same problem. I only noticed it in LR 5.4/5.5. If there are any videos on the card, then Lightroom is unable to see or import any of the RAW files on it. I currently have to import the videos, disconnect the camera, delete the video files, and reattach it before Lightroom can see the CR2 files. This was not an issue in Lightroom 5.2/5.3 as far as I know. I have not changed SD cards or anything else other than upgrading to Lightroom 5.4 (and later 5.5 when I found the problem). Any help is appreciated.

Similar Messages

IPhoto does not import rotated images from camera

I plugged in my CF card to a reader and first looked at all my photos. Those that needed rotation I fixed with preview. Then when I opened iPhoto, it didn't recognize any of their file formats. Is there a good workaround?

I would not mess with them on the card - use image capture to bring them to the Mac disk and then rotate the ones needing rotation (and rename, etc) and then import to iPhoto
LN

Lightroom 5 will not import selected images from my SD

Lightroom 5 will not import selected images from my SD card on my IMac . My Camera is a Canon 650D it will open them on my pc copy. My Lightroom 4 on my IMac will also import from an sd card. Help please.

Why not? What happens? If there is an error message, please quote it in its entirety, word-for-word, verbatim.

LR2.7 does not bring up images from Nikon D7100

LR 2.7 does not bring up images from Nikon D7100 which I have just purchased. I have downloaded latest DNG raw converter 7.4 but does not work. The images come through fine in Bridge but not Lightroom. What is the problem?

Since camera makers insist on their own proprietary file formats, Adobe must provide support for each new camera as it is introduced. When a new version of Lightroom is released all development and support for the previous version ends. Your camera wasn't even mentioned or introduced when Lightroom 2.7 was released. Consequently, there can be no support for it. When you buy the newest camera model you should expect to also buy updated software to support that camera. In any event, the raw processing in the latest version of Lightroom is so far superior to what you have you really need to upgrade your Lightroom. You might consider using the Lightroom 5 beta until the official release.
Are you sure the DNG converter doesn't work? You only point it to the folder containing your raw files. The DNG converter doesn't list the contents of the folder. You will only see a list of your NEF files after you click the button to convert them.

Lightroom does not automatically find images that have been moved within same parent folder/drive

Lightroom does not automatically find images that have been moved within same parent folder/drive...I moved my catalog and photos to shared drive so that all users can access and when I moved photos within parent folder lightroom did not automatically adjust like in video I watched. I had to manually locate. Is there a fix for this?

Lightroom does not automatically find images that have been moved within same parent folder/drive...I moved my catalog and photos to shared drive so that all users can access and when I moved photos within parent folder lightroom did not automatically adjust like in video I watched. I had to manually locate. Is there a fix for this?
I haven't watched that video, but if you move photos in your operating system ... Lightroom does NOT automatically find these photos. Finding photos that have been moved is NOT a feature of Lightroom. So, there is no fix for this.
You would have to tell Lightroom where the photos are now located, as explained in the link from 99jon
If you must move photos, move them inside of Lightroom, not in your operating system, or better yet — don't move them, and use Lightroom tools such as keywords and other metadata to achieve organization.

Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

There have been many issues reported with Kodak cameras - serach the forums for them
Actually the best practise is to use a card reader to import your photos, verify that they are imported ocrrectly and wait at least one backup cycle and then use the camera's format command to reformat the card and erase it - this assures no lost photos and always having the card properly formatted
LN

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Lightroom does not identify jpg images as duplicates

I'm using Lightroom 5.3. I'm importing images to my catalog from one external drive to another using the "copy" function. I have "do not import suspected duplicates" checked, but Lightroom does not identify duplicate jpg images as such and lists them as new files to import. If I import these images they show up in my database/catalog with the -2 designation. The images are identical in filename, capture time, size and EXIF info. I have tried removing my preferences file and starting another but that doesn't change the behavior. I have seen other posts with similar issues but cannot find a solution that works for me. I don't see this listed as a bug either. If anyone has suggestions for a fix I would appreciate it. Thank you.

There is a catalog-specific preference whether to allow LR to adjust date/time values in raw files. I think that is for LR to add a timezone or not. Since these are JPGs maybe this setting doesn’t apply, but maybe the JPGs were imported from RAWs that had it set, or maybe the setting does apply to JPGs, now, too.
It would be worth checking the catalog-specific setting and playing with it to see if you can get the timezone to either exist or not existing for both the images, depending on which one has it, now.
If your current system timezone is not UTC-7, then it would make sense for LR to interpret the images without a timezone to be in the system timezone and different than the ones that have a timezone associated with them.
If the pictures were taking across multiple timezones then there probably isn’t’ a good way to get them all to have the corresponding timezone as the other copy you’re trying to import.

Lightroom 5 not importing photos directly from card

I have Lightroom 5, and it's not importing photos directly from the memory card, either via card reader or with the camera plugged in. I have a Canon 60D, and am shooting in RAW.
LR5 opens, and the photos show up as thumbnail previews. I click to import, and I get a message that the files could imported because they could not be read. If I immediately go to the "my computer" icon, the card reader (or camera, whichever is plugged in) does not show up as being connected to the computer. If I unplug the card reader (or camera), let Lightroom open, then immediately go to the "my computer" icon before I try to import via LR5, the card reader shows up then. I have to drag the images from the card onto my desktop, then import the images to LR5.
Anyone know why LR5 is doing this?

Greyed out photos means you have previously imported the photos into Lightroom, and there is no need to import them again (nor is it a good idea to do so). You need to go to the Library Module (not the Import dialog box) and find the photos and use them as you want.
If you try to import a not-greyed-out photo, and it takes "forever", close Lightroom and try deleting your preference file: Preference and other file locations in Lightroom 5

How to solve the error: "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John

Iphoto does not import all items from camera

I have been importing photos into Iphoto from my canon SD300. I have noticed that on occaissions it has skipped a few files while importing. In particular it has skipped movie clips. When the camera is connected Iphoto says it is ready to import and tells you the number of images and movie clips, and it recognizes all of them. However, once the import function is over on the last occaision I noticed that two clips and one image was not imported. I manage to get the missed image/clips by inserting the memeroy card in a card reader and dragging the missed image/movie clips into Iphoto.
I would appreciate if any one knows why Iphoto does not import all the items from the camera even though it recognizes that they exist and how I should fix this problem.
Thanks.

Hi imac2,
I don't know why iPhoto skips some of your files. I can tell you that I use Image Capture to download my images and video clips. My video clips from my Canon can get quite large (over 1010 mg). iPhoto can import smaller clips that digital camera made, but now a lot of the newer camera can create very large video clips and I don't think iPhoto can handle importing them.
Once I download my images and video clips I put them in dated folders. This makes it much easier to back up the video clips and images. I then import the folders of images into iPhoto. I like having more control.
Lori

I keep getting the error: "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

This is a duplicate thread - see here

Aperture does not import jpg:s from certain files.

After reassembled all the programs to a new hard drive in Mac Pro, Aperture does not import certain files with .jpg -photos. Earlier it has succeeded. Changing the photo location does not help. Nor importing as projects. Files are visible when asking to import but the thumbs are not seen on Aperture window.

, I see only the file, where these photos are, not the photo names or thumbs inside the file (Aperture import path).
You mean in the Aperture Import panel the folder, where the jpegs should be, is empty?
Then you may have excluded jpegs from import in your "Import Settings".
Check the above settings in the "Import Settings" options in the "Import Window". I.e-make sure the Raw+Jpeg Pairs option is set to "Both", even if you do not import raws.
After reassembled all the programs to a new hard drive in Mac Pro
Is this new Harddrive your system volume? And are the jpegs you wat to import located on this drive? Or are the on another external volume? If yes, how is this volume formatted?
Have you checked the permissions and ownership of the jpegs?

Safari 6 does not display motion jpegs from IP camera

I do have several IP cameras from Axis and other companies. Until I upgraded to Moutain Lion / Safari 6, they worked fine. But in Safari 6, the motion JPEG is no longer streaming. It streams a few frames, but then stalls. Has anybody seen this as well?

I will say that since I originally responded above that although Firefox works almost all the time, I have had a couple of occasions where Firefox as become unresponsive while streaming pictures from my Panasonic cameras... The behavior is much worse on Safari where I can, in effect, only get one or a view images before it freezes and no more streaming occurs until you leave that streaming page and come right back to it, where it sends a few more frames and then freezes again... Firefox never does any of that. However, I do believe the couple of times where it has become unresponsive while streaming the same video images is likely related to a similar problem that Safari has under Mountain Lion. But until Apple makes some improvement I have basically needed to stop using Safari to view images from these cameras... I haven't tried Chrome... Maybe I will give that a shot next...
And don't forget to send feedback to Apple at
http://www.apple.com/feedback/
thanks... bob...

Adjusting date and time does not work for pictures from one camera.

I have a set of pictures taken with a Casio EX-Z20 camera in my Aperture 2 library. Because the clock of this camera was off by a few hours I changed them all at once with the option "Adjust date and time...". This worked well and when I sorted the images from different cameras by date in Aperture they were in the order.
When exporting all the images as JPEG the images in the set from this camera was reset to it's original.
That was very strange, I decided to try and change the date of these images in the master files as well by checking the checkbox "Also change master files".
When I change the date from 15-10-2008 18:34:44 to 16-10-2008 10:34:44 (+16 hours) the date of the image changes to 16-10-08 01:36:43 GMT+02.00 (+9 hours, 1 minute, 59 seconds).
When I change the date from 16-10-08 01:36:43 to 16-10-2008 19:36:43 (+18 hours) it ends up as being 16-10-08 10:38:42 (+9 hours, 1 minute, 59 seconds)
When I change the date from 16-10-08 10:38:42 to 16-10-08 10:48:42 (+10 minutes) it ends up as 16-10-08 01:50:49 GMT+02:00 (-8 hours, 47 minutes, 7 seconds)
I have worked around this problem by adding some hours to the desired time and eventually got it about right, but this is still a very annoying problem. Has anyone else encountered it or know of a way to avoid it?

{quote:title=JohniBook wrote:}
Has anyone else encountered it or know of a way to avoid it?
{quote}
I certainly have had issues regarding wrong dates, time stamping and DNG's in Aperture. There have been posts here from others as well with the same kind of date problems.
I have reported the bug to Apple and hope for a solution to the issue in a near future.
Regards
Paul K

Lightroom does not import my images from 70d camera sd card when there is video on it

Similar Messages

Maybe you are looking for