Lightroom doesn't recognize ACR 5.5 and my D300s RAW images

Lightroom 2.4 does not recognize my Nikon D300s RAW images. I downloaded ACR 5.5 and after install both Bridge and Photoshop CS4 handle the D300s RAW images but my Lightroom 2.4 will not import them saying that it is a damaged or unrecognized file type. I have rebooted my entire Vista system and the problem persists. Any suggestions on how I might make Lightroom recognize ACR 5.5 and my D300s RAW images? Thanks in advance.
Harry Campbell

Harry Campbell wrote:
Any suggestions on how I might make Lightroom recognize ACR 5.5 and my D300s RAW images?
You don't want Camera Raw 5.5 (unless you want to use Photoshop CS4), you want the DNG Converter 5.5 which can convert the D300 raws into DNGs that are compatible with Lightroom 2.4. The next version of Lightroom (presumable 2.5) will have the support built in without needing the DNG Conversion...

Similar Messages

Lightroom doesn't recognize PS Elements 6?????

I have been using Lightroom 1.3.1 and PS Elements 4 with good compatibility. Now upgraded to PS Elements 6 and Lightroom doesn't recognize the program when I try to go from Lightroom to PSE6. The drop-down menu under "photo" in the Develop module has the command "edit in Photoshop" grey and not functioning.
I know that there is a fix mentioned to add photoshop itself but I need to add photoshop Elements. Any suggestions?
Thanks

OK, 1 more time, still wrapped wrong. Have a look at the URL to get the info needed, or uninstall/re-install as siuggested in another post. ----- Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\PhotoshopElementsEditor.exe] @="C:\\Program Files\\Adobe\\Photoshop Elements 6.0\\PhotoshopElementsEditor.exe" "Path"="C:\\Program Files\\Adobe\\Photoshop Elements 6.0\\" ----- <[email protected]> schreef in bericht news:[email protected]... >I see the editor wrapped at 76 chars. The reg-entries should look like (Hope this doesn't wrap again): > > ----- > Windows Registry Editor Version 5.00 > > [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App > Paths\PhotoshopElementsEditor.exe] > @="C:\\Program Files\\Adobe\\Photoshop Elements > 6.0\\PhotoshopElementsEditor.exe" > "Path"="C:\\Program Files\\Adobe\\Photoshop Elements 6.0\\" > ----- > > > <[email protected]> schreef in bericht news:[email protected]... >>I guess you first installed PSE6 and then uninstalled PSE4? >> >> Basically the link in the registry is gone. To fix, go into regedit and go to the following place: >> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\ >> >> In here you should have an entry for PhotoshopElementsEditor.exe. If you have, check if it is pointing to the correct place , >> point b). If not, you have to create it point a). >> >> BEFORE YOU EDIT THE REGISTRY, MAKE A BACKUP. >> >> a) >> To create the entry, do: >> Right-click on the 'App Paths' entry, and select new->key. Enter the name PhotoshopElementsEditor.exe and hit return. >> >> b) >> Click on the PhotoshopElementsEditor.exe entry. It should display the values Default and Path. >> The value Default should point to the editor : in a default install in Windows this would be : C:\Program Files\Adobe\Photoshop >> Elements 6.0\PhotoshopElementsEditor.exe >> If it does not point to the correct editor exe, rightclick on the value and choose modify and enter the correct path+filename. >> >> The second value should be Path. If it does not exist, rightclick in the window under Default and select new->String value, enter >> the name Path >> Then rightclick on Path, select Modify and enter the correct Path, in a default install this would be : C:\Program >> Files\Adobe\Photoshop Elements 6.0\ >> >> c) >> Close regedit >> >> When starting lightroom, this will now show the PSE6 as editor again. >> >> Info was taken and modified for Photoshop Elements from : http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401629 >> >> If you have a default install in the path shown above, you can copy the following text (Between and not including the -----) into >> a text file, call it something like LR-PSE6.reg and double click the file to insert into the registry. I DO NOT GIVE ANY >> WARRANTY, but this is what i use to rebuild the entry after testing. >> >> ----- >> Windows Registry Editor Version 5.00 >> >> [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\PhotoshopElementsEditor.exe] >> @="C:\\Program Files\\Adobe\\Photoshop Elements 6.0\\PhotoshopElementsEditor.exe" >> "Path"="C:\\Program Files\\Adobe\\Photoshop Elements 6.0\\" >> ----- >> >> Have Fun. >> >> <[email protected]> schreef in bericht news:[email protected]... >>> How do I do that Dave? I am using a Windows XP OS. When I initally loaded LR I didn't need to do anything for it to recognize >>> PSE5. In my new PSE6 I already tried to list LR as an external editor and now I can go from PSE6 directly to LR but this didn't >>> seem to let me go from LR to PSE6. >>> Milomannn >> >> > >

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
Best regards,
Michele

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

Why my dvd drive on MBPro doesn't recognize blank cd-r and dvd-r?

Super drive on my MB Pro doesn't recognize blank CD's and DVD's.Both are ejected after 10-15 seconds.It reads all other CD's and DVD's....
That means I cannot burn new CD's and DVD's.Any sugestions?

OK
Then the best way to pin this problem down is to split the process into two parts
• Encoding
• Burning
By "Save as a DiskImage" - If this works and plays OK with DVD tool - then
• Material Used are OK
• iDVD and Encoding is OK
Then use Disk Util tool to burn to DVD and now
• I only use Verbatim
• DVD-R (as they play on more and even older DVD-players)
• Burn Speed set down to x2 or x4 - to get less Burn Errors (and even the DVD will play on a PC or the Mac that made it - NOT ALWAYS SO ! )
• and I never let Start-Up Hard Disk go under 25Gb free space
• NO other program during process or burning - e.g. Screen, Energy-Savers, Internet, etc - No Nothing
BTW - DO NOT pop in any CD or DVD until Mac ASK'S for it ! else You wind up with a Data-DVD if burned.
Yours Bengt W

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

My macbook doesn't recognize my iphone 5 and wont let me sync my music or apps in itunes

My itunes 10.6.3 (25) in my macbook OS X doesn't recognize my iphone 5. So I can't sync my apps or music to my phone (although I was able to sync my photos and videos through iphoto) I rebooted both my phone and mac and switched connecting ports. Nothing.

Welcome to the Apple Community.
Have you tried in different locations, does this happen everywhere. Have you tried a hard restart.

One item doesn't recognize me as owner, and I cannot erase it

Hi everyone, I hope someone can help me!
I have a Macbook Pro, apparently outdated (Mac OS X 10.6.8). I saved a file ones and added custom access to it, but now, I've been trying to erase it and I can't do it! Every time that I send the document to the trash, a dialog box opens and asks me for my administrator password, I write the password and nothing happens. It's like the file doesn't recognize me as owner. What can I do?

See if any of the information here can help you.
Good luck,
Clinton

Solaris 9 x86 doesn't recognize my lan card and can't get the drivers

Hi guys! I have a problem with my solaris os.. It doesn't recognize my realtek 8029 lan card and this means that i can't download the drivers from the internet.. Anyway i got the drivers using my other installed OS ( slackware linux 9 ) from the www but there's a problem it seems that i cant mount the harddrive where the driverz are..neither linux->mount solaris hd disk nor solaris->mount linux hd disk do the trick..(+ i don't have a floppy drive ) Any ideaz how to transfer the drivers from the hd disk where the linux is installed to the solaris disk..?

I have the same NIC (RTL 8029 chip), and.. the solution 4 you. :) I made this quick guide for me, so I can add netwotk support to my system, very easily. Happy to see that another person needs that info.
Follow these steps:
1. Download the file from the link below, put it at /, and unzip it.
ftp://sun.drydog.com/pub/solaris/nei-i86pc-solaris5.7.zip
2. Run (from command line) the command:
add_drv /kernel/drv/nei; devlinks
3. Create the file /kernel/drv/nei.conf and write
name="nei" parent="isa" reg=1,0xe800,0x1f interrupts=5;
(this is the hardware address for my card, you should find your's).
4. Create the file /etc/hostname.nei0, whick will contain the line
192.168.0.1
(this is the IP addr. I use for my internal network, change that to any other reserved addr. you like, like 10.0.0.1)
5. If you use IPv6, create /etc/hostname6.nei0 ,too, with the same contents as hostname.nei0
192.168.0.1
6. Edit /etc/hosts and add the line:
192.168.0.1 myname.mydomain
7. Edit /etc/inet/hosts and make the file look like this:
127.0.0.1 localhost
192.168.0.1 myname.mydomain loghost
8. Edit /etc/inet/netmasks and put:
192.168.0.1 255.255.255.0
9. Run from command line mode or from a terminal:
/usr/sbin/drvconfig -i nei
10. Run from command line mode or from a terminal:
touch /reconfigure; /usr/sbin/reboot
11. After rebooting, type "ifconfig nei0 plumb" to make sure the device was recognized.
It should show up in the output from typing "prtconf"
Normally, now you can use your RTL8029 card.
I hope I help a little bit mate. :)

Nikon D300 Raw Images and Lightroom 1.4.1

My updated 1.4.1 Lightroom and 4.4.1 Camera Raw are not reading the raw images from my new Nikon D300. I have read several strings of conversation from other folks who are having this problem, and from what I am reading, my 1.4.1 Lightroom should be recognizing them, but it's not. Any help would be MOST appreciated.
Frank Leonard
[email protected]

Before you even answered I transferred the files from my camera card to my hard drive, and presto bingo, they are now importing beautifully into lightroom. THANK YOU LEE JAY!!!!! Frank Leonard - [email protected]

DNG Converter 5.6 and Canon S90 RAW Images

This has been an ongoing query with the Adobe Customer Support Centre since November 12 last year. Refer case no #0181279281. Although the documentation that accompanies DNG 5.6 states that the Canon S90 is a supported camera, the converted images come out far too saturated and are not usable. Has anyone been able to rectify this problem? I use Photoshop CS3.

Rob_Minter wrote:
…if I upgrade to ACR 5.6, will the image look the same (on my monitor) as when it is opened in ACR 4.6?
Rob,
Well, for starters, you cannot open the CR2 in ACR 4.6 directly. You know that, of course, otherwise you wouldn't have to mess with the DNG Converter in the first place.
If you use ACR 5.6 and if you have correctly installed the additional camera profiles that will get added to ACR 5.6 once you correctly install the DNG Converter 5.6, you will have a variety of choices to open your CR2 file or a DNG derived from that file. Even the "Adobe Standard" profile for your particular will most likely improve the rendition, but you can choose the "Camera Faithful" or any of the other five profiles specifically provided for your camera model.
Note that the screen shot is a medium-resolution JPEG only.
This ACR rendition was generated in ACR 5.6 with the "Adobe Standard" profile
and an Exposure correction of +1.45.
Also note that only the profiles for the specific camera that generated the raw file will show in the profile menu of the Camera Calibration tab at any given time. Other cameras will cause that profile menu to show different profiles. In actuality, the installation of the DNG Converter adds a gazillion profiles for all supported cameras, so it's a good thing that only the camera-model-specific ones show.
This ACR rendition was generated in ACR 5.6 with the "Camera Faithful" profile
and an Exposure correction of +1.45.
The rendition of the image will be different with each of the profiles (as you can see above), but even so, I doubt any of those profiles will match the rendition of the totally obsolete ACR 4.6. The ACR 5.6 rendition is bound to be better.
Each new version of ACR includes improvements, enhancement and bug fixes that are not publicized or even admitted.
If you have mastered the use of ACR, you can match the rendition of just about any raw converter and any other profile, especially if you calibrate your camera, which is extremely easy to do in ACR 5.6. You can save as many presets as you want.
That's why I strongly recommend Jeff Schewe's book. As far as I'm concerned, it's required reading.
Finally, there are many other reasons to upgrade to ACR 5.6, like the spot Adjustment Brush and the Targeted Adjustment Tool (TAT).
Don't take my word for it, download the CS4 trial version and update that to ACR 5.6 (it comes with 5.0, also very obsolete). You can keep different versions of Photoshop on your disk. On the Mac, you can even run different versions simultaneously by launching the older version(s) first.
Uninstalling CS4, though, may mangle your CS3 install, so keep that in mind. My feeling is, though, that once you use CS4, you won't ant to look back at CS3. DISCLAIMER: I have no connection to Adobe whatsoever.
I cannot speak to Lightroom because I do not use it, for a number of reasons that are not relevant to your issue.
Respectfully,
Wo-Tai-Lao Wo-Tai-P'ang.

Dodge and Burn on RAW images

Looking to start using RAW files more often to process my images.
Tried to use the dodge tool with a RAW file over the weekend and recieved a notification saying somthing along the lines of "Cannot use this function with a 16bit file, must convert to 8bit"
I also recieved a similar message when trying to use the magic brush tool.
I would like to be able to adjust exposure, color, contrast (clarity) etc. when working with a RAW file. Would like to be able to adjust these parameters using the select tool, and would also like to be able to "brush" theses adjusments on. Also, if there is a Gradual ND filter function available, i would like to know where to find it.
Is it possible to do these things (with a RAW image) using PSE? If so, how?
Or do I have to purchase Lightroom if i want to work with RAW images?
Thanks in advance for the help!

I don't believe you can dodge and burn on a RAW in PSE.
You can do it in the PSE Editor, after converting the file to 8 bits. For dodge and burn, there's probably no noticeable difference between doing it 8 bits vs 16bits. However, I would definitely advise you to do as much editing at 16bits before you switch to 8bits, because you can't switch back.
You could, if you want, use Lightroom to dodge and burn RAW photos.
The Magic Brush tool won't work on RAWs in PSE, you'll have to convert to 8bits; and this tool doesn't exist in Lightroom.

Lightroom 5.3 won't preview or import Nikon D7100 Raw Images

I'm using LIghtroom 5.3, and raw camera 8.3, the latest update available. I found from Adobe's site that this version supports D7100 raw image imports. But when trying to import D7100 raw images, I get a message that "the file is not recognized by the raw format support in LIghtroom."
I'm hoping someone can help with this, as obivously getting help from Adobe is not possible beyond FAQs.
thanks,
-Bob

Bob,
I am using LR 5.3 with D7100 RAW files with no problems, so there should be a solution to your situation. It might help find a solution if you tell us what computer you have, what OS, the specs, and more importantly, how you are trying to import the files. Are you connecting the camera directly to the computer? Are you using a card reader -- internal or external? Are you copying the files to your hard drive and then importing into LR from there? At one point in the past, there was a problem with Nikon Transfer somehow changing NEF files so that they wouldn't be read by LR.
As a test, try copying a few NEF files from you memory card to your hard drive using the OS file manager -- Finder or Windows Explorer -- and then try importing into LR. Does that work?
John

Lightroom doesn't recognize ACR 5.5 and my D300s RAW images

Similar Messages

Maybe you are looking for