Lightroom " Edit in" menu drop to work on Photoshop is grey out?
Lightroom “ Edit in” menu drop to work on Photoshop is grey out, even though I have my “store preset with this catalog” unchecked. Do I have to reinstall LR?
Your photos are never "in" the catalog. The catalog just points to your images in their folders on your hard drive. Do you understand what smart previews are and how they are supposed to be used? Are your images on an external hard drive that is disconnected from your computer?
Similar Messages
-
I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in
Try to put your headphones several times in and out from your connection, might be the switch is stuck. Normally it should work again while trying to plug the headphones in and out!
-
TS1559 i have done all of the above wifi worked briefly but is greyed out again what can i do
i have followed apples instructions to solve the problem the wifi worked briefly but is greyed out again can anybody help have done ios7 update
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Running Firefox 7.0.1 on Mac OS X 10.7.1.
Number of tabs that can be opened in a single window is limited. Can't currently open more than four. Clicking the "+" button to the right of open tabs does nothing, and the "New Tab" option in the file menu is greyed out.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
"Edit in Photoshop": Why is Photoshop is greyed out?
I have LR 3.2 and PS CS5 Extended installed on a Win 7 64 bit PC. Preferences|External Editing shows Photoshop but when I choose an image and right click, Edit in shows Photoshop greyed out. (Also when chossing Edit In from the Photo drop-down menu. I have tried reinstalling ("repair" option) LR but LR does not detect PS. Any suggestions?
Reinstalling CS5 did the trick. Thanks.
-
Edit in photoshop is greyed out
I have read all the forums and search engine finds on this question:
Edit in Photoshop selection is greyed out in lightroom cc (also have Photoshop cc 2014)
I have tried all the suggested fixes ( registry edit, re-install in all various combinations , all of them )
Still will not function properly (Edit in photoshop selection still greyed out , in fact all selections, are greyed out)
Seems this started when I recently applied the "update" to light room last week.. any way to go back to previous version ?
Has anyone at adobe have an answer to this ?
Thank you in advance...sonsteby,
You didn't describe any problem, except for not being able to re-install. And your problem is not the same as brownwood1 had.
Your problem is probably from passing a 16-bit file to Photoshop, and most of the filters only work on 8-bit files. You can change Bit Depth in your preferences:
or you can change mode in PS on an individual basis:
Hal -
Edit in photoshop is greyed out in both LR3 and LR4
Sudenly the edit in photoshop option has been greyed out in both programs It has always worked and for no apparant reason that I can recall this has happened Can anyone advise what has caused this please
sonsteby,
You didn't describe any problem, except for not being able to re-install. And your problem is not the same as brownwood1 had.
Your problem is probably from passing a 16-bit file to Photoshop, and most of the filters only work on 8-bit files. You can change Bit Depth in your preferences:
or you can change mode in PS on an individual basis:
Hal -
Delete row option doesn't work and then becomes greyed out. Need help troubleshooting.
Hello!
I'm hoping that someone can please help me troubleshoot an issue I'm having with a table in my form. It has a menu associated with each row that allows you to add, delete, reset, etc. rows. The name of the table on the form is the Purchase Items table. It's the first table on the form.
Here are the steps to recreate the issue:
1. Create 3 rows in the table
2. Click the menu ("X") button associated with the first row.
3. Select "Delete this row". Nothing happens.
4. Click the menu ("X") button associated with the first row.
5. Select "Delete this row" again. Nothing happens.
6. Click the menu ("X") button associated with the first row. You'll notice that the "Delete this row" option is greyed out.
My best guess that the rows are being deleted in the background which would explain that if I have 3 rows, and "delete" 2, that my delete option is then greyed out because I believe there is logic in there such that if there is only 1 row then grey out the option to delete rows. I was planning to attach the file as I have seen others do but don't see the option. I'm happy to provide the file via email if that's easier. Thank you in advance!
SaskiaI've posted the solution here:
http://www.fieldeffecttechnologies.com/AdobeForums/PCard.pdf
The instance manager methods were being given the wrong index of the row to work with. They need to be passed the index for the row that the button you are pressing is in (of course). Instead they were given some v8b index, which I honestly cannot decipher as to what that number possibly means. (Math.round((v3-v4)*v6........)???
Anyways, I fixed it up and also changed some of the logic in the sub menu to determine what's greyed out.
I like that feature! Might even show it to a client!
Kyle -
After updating from CC to new 2014 updates Lightroom would not go from 'Library' to 'Develop' - develop screen was greyed out showing the message 'Develop module is disabled. Please renew your membership to reactivate the Develop module.' Since my membership is fully up to date. I then uninstalled Lightroom 5 and then installed it again. Now when I try to open Lightroom 5 its LOGO flashes onto the screen and then 'crashes' in an instant. Please fix.
Hi brooks45,
Please try the steps mentioned in the KB Doc : http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
Regards,
Rave -
Edit in Photoshop CS5 greyed out in LR4 and LR3
Since one of the many upgrade to LR3 I have not been able to edit in photoshop, it is greyed out. I thought the upgrade to LR$ would deal with this but it has not. I have tried the upgrade to beta 6.7 but this does not help. Would removing CS5 and reinstalling help? Very frustrating.
RalphRalpheyesight wrote:
... Would removing CS5 and reinstalling help? Very frustrating.
Ralph
I'm pretty confident it will help.
Beat -
Work flow Icon Is Greyed out for One user
Hello SAP Guru's ,
We are facing issue for one user in SAP easy Access .
Workflow Icon,User Menu ,SAP Menu buttons is Greyed out but user able to access transaction SBWP.
Can you please give solution why those buttons are greyed out and few button's are (Enabled attched In scrren shot)?Do I need to maintain any where user settings
Please let me any user specific settings is missing for that user ?
My Analysis - I have checked with user and I tried to change in SAP Easy Access ->Extras->Settings Still not able to achive any .
I gone thorough the link - http://scn.sap.com/thread/1737679
Still not able to resolve this issue.
Thanks In Advance,
ShivHi,
Please check the following authorization objects are assigned to the user or not in SU24.
S_BDS_DS BC-SRV-KPR-BDS: Authorizations for Document Set
S_OC_DOC SAPoffice: Authorization for an Activity with Documents
S_OC_FOLCR SAPoffice: Authorization to Create Shared Folders
S_OC_ROLE SAPoffice: Office User Attribute
S_OC_SEND Authorization Object for Sending
S_OC_TCD SAPoffice: Transaction Code Authorizations
S_WFAR_OBJ ArchiveLink: Authorizations for access to documents
Regards,
Murali Krishna. -
Adobe CC (edit: CC 2014 not CC) Filter/render/tree is greyed out
Good Afternoon,
I recently downloaded Adobe Creative Cloud and LIghtroom. I would like to know how to access the tree filter. It is greyed out?
Thank youThere are minimum GPU requirements to access render trees.
Re: Picture Frame and Trees greyed out
It's actually quite a handy tool that I have used on several occasions -
Lightroom - 'edit in' option no longer working
I have LR version 5.7 and Elements 12.1. I am running a Mac with OS X Yosemite 10.10.1. When using LR the 'edit in' option used to start up Elements automatically. It no longer does this. I have checked the preferences are set correctly in LR. I have deleted the plist files in the library for both LR and Elements and reopened both programmes to re-establish new plist files but all to no avail. Can anyone help please?LR
Hi, I followed these instructions, see link below, and reset my LR preferences, and now the "edit-in" PS is working again. At least it did for two files so far. Hopefully this will be the fix. You should try it too.
Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Marion -
How do I make my Navigation menu drop-downs work, LIVE?
I've tested my entire site in my Browser (Safari) and my drop-down menus all work flawlessly. However, when I upload my site and go LIVE they no longer work. The menus were implemented on a B-Master page. I also uploaded my generated Scripts and .css folders as part of the site. I was wondering if the error was caused by a "css" problem since that seems to be the only info uploaded regarding the B-master page that I can think of. Thank you in advance for your time. Confused...
Have you published the site to a third party webhost? If yes, did you use the built in FTP upload feature or a FTP client? Did you try re-uploading all files in order to make sure you didn't miss any static assets?
If you have made sure of all of the above, a site URL would be helpful in identifying the issue.
Thanks,
Vinayak -
when I go to another website the back button to the home button never works. the home button works. I can't do any or the above mentioned features
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Maybe you are looking for
-
Safari can't handle PDFs???
Safari 4.0.5 can't read pdfs... it cannot be configured to open pdfs with Preview. Lemme guess: We can use only Adobe products... Firefox is too slow... Chrome hangs or crashes every few minutes... and now Safari can't handle pdfs. It's useless...
-
i scanned text files, created a tiff document...now i want to edit the text...but how?
-
Set the date as a new filename for s40 camera
on s40 (6300) is it possible to write some code (%date /& /# or something like that) in the "my title" as the default title setting for new taken pics filename ? the current numbering method is very irritating when you want to keep some and delete so
-
Not able to start MaxDB database.
Hi, While creating other blank MaxDB database and we changed some permissions on /sapdb...Now we are not able to revert back those original permissions for the files in /sapdb. While starting the MaxDB database i am getting error as below, /sapdb/pro
-
Firestore FSC problems with m2t and .mov files
I am having a problem opening files from Firestore FSC. Both m2t and Qt .mov files will not open for me in FCE,iMovie or Qt with Quicktime MPEG2 reader installed. Anyone having this problem and is there a solution other than buying Final Cut Pro? Cha