Lightroom/Elements Help/Updates won't link to web

I have Lightroom 5.6 64 bit and Elements 12 installed on two Windows 7 computers - one is my work and the other my personal home computer. At some point the versions on my home computer stopped linking to the internet when I select a Help function or to check or download updates. One message I get is that I have to associate a program with the file. I tried to figure this out in windows but it is totally obscure to me. Plus since it happens on both applications it must be something with some common Adobe program. I recently uploaded some files with GPS coordinates into Lightroom - they don't show up at all on my home computer, but they do on my work computer and the Map function works fine. Any ideas?

Hi Krisztina ..
Using OpenDNS can help when pages won't load properly.
Use OpenDNS for better speed, more security, includes anti phishing filters, prevents browser redirects, blocks the flashback trojan, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Apple suggests using OpenDNS here > Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Similar Messages

Unable to upload photos in bridge, won't recognize my new camera nikon 7100. went to help, update, won't accept my id and pw but adobe website does.

I got a new camera, Nikon 7100. Unable to load in camera Raw. Went to the help.....update and it asks for id and pw. Wont recognize m adobe id or pw. When I go to the adobe website it do

Re-install of PS CS6 resulted in the following errors:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
This doesn't really tell me much, anybody else got a clue what this is...?

New Lightroom - need help updating from LR 5.6

I am missing my Creative Cloud app on my desktop. I would now like to update to the new version of Lightroom. How can I do this? (When I tried to download the CC manager app, I got error code 50.

Hi PicGal ,
Try to go to this discussion in the forum where a solution has already been found, see if it's the same problem.
Creative Cloud "Download Error" message

Lightroom 4.3 update won't run

I have windows 7 and lightroom 4. App keeps telling me I need to update to 4.3. I downloaded it. When i try to install it, it only gives me an option to remove or repair files. I click repair and it goes through cycle. Version never changes and I keep getting message to update to 4.3. How do i get this update to install?

see if one of these solutions works for you: http://forums.adobe.com/message/4921688

Help Files Won't Load In Web Broswer

We recently moved our web site and I moved over all of our
help files. Whenever I try to view these files through Internet
Explorer, the opening page seems to just keep trying to load (like
an endless loop). I am 90% sure that it has to do with a setting in
IIS because of the following:
1. I can view the files just fine if I view them in Windows
Explorer.
2. I tried creating a "test" group of Help files and they
work fine on another web server that I have, but don't work on this
particular one.
I am wondering if anyone has any insight on this? I am
running a Virtual Private Server with Win2003, IIS 6. If you want
to look at what the files are doing, please go to
http://www.basic-software.com/80help/80help.html.
This is a matter of urgency, so your reply, suggestions, are
greatly appreciated!

OK - Since no one else is responding on the forum to this, I
have an update -- I found out that if I remove these lines from the
opening page it will load my help files, but it doesn't show the
opening URL like before -- Any clue again as to why this works on
our other server, but not on this one?
<script type="text/javascript" language="javascript" >

</script>

Adobe Photoshop Lightroom 3 updates won't work? Also tried DNG converter but will not work either.

Does anyone know how to get the Adobe Photoshop Lightroom 3 to update so you can use it? I can't process raw files with my new Canon SD Mark 3.
It looks like they stopped doing updates.
Next I tried the DNG converter but it was useless. It could not find any of my photos.
SOS - I needed to complete a job with this last night and their site won't help and they finally respond by saying we will get back to you in a few days.

That camera requires at least Lightroom 4.1. There is no update for Lightroom 3 that will support the files from that camera. I'm guessing that you're having the typical problem that new users at the DNG converter encounter. The converter prompts for the *FOLDER*. If you open that folder then the DNG converter will tell you there are no files to convert. Just choose the folder. I know, it's really stupid prompt and method. But it is what it is.

HT4623 Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?

Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?
I don't want to lose all my pics, songs etc
Whats my next move as I CANNOT use the ipas at the moment!!!!!!!!

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

I have bought Canon EOS 70 D and have Photoshop Elements 12. The program has RAW 8.0. I need 8.2. I have tryed help - update and it is searching hour after hour. Nothing happens. The program i brand new, Installed yesterday

I have bought Canon EOS 70 D and have Photoshop Elements 12. I need RAw 8.2 and the program has 8.0.
I have tryed help - update and it is searching for hours. Nothing happens. The program is installed yesterday.

Are you updating from the Editor, if not go to Expert Mode and click:
Help >> Updates
But check first under the Help menu that you are signed-in - your email address used for you Adobe ID should be visible. You should be able to update to v8.5

IPod updater won't unistall and there's always a warning....HELP!!!

I've got a problem with my iPod colour...I've just bought a new iPod and then i wanted to clear iTunes AND iPod updater. But the problem is that the iPod updater won't unistall. There's a warning saying: internal failure
Error Number: 0x80040707
Description: Not accessed refused
I don't know what's it!!! Can you help me...I'm sooooo desperate. I want to listen to music!!!

hiya!
But the problem is that the iPod updater won't unistall. There's a warning saying: internal failure
Error Number: 0x80040707
Description: Not accessed refused
in this context, there's a couple of different things that could be causing that error.
(1) you can get it sometimes if you try to uninstall the updater from a different XP user account from which the updater was installed, or try to install a higher version of the updater in a different user account from a lower version.
so if you've got several different user accounts on that PC, see if you can find the account in which the updater was originally installed, and try to uninstall it from there.
(2) if you can't uninstall the updater from any account (or you don't have multiple user accounts on that PC), the installation configuration information for the existing updater may be compromised.
in that case, download and install the Windows Installer CleanUp utility, and use it to clear the things called either iPod for Windows or iPod Updater. (my 2004-11-15 version of the updater shows up in Windows CleanUp as "iPod Updater", but my three later versions show up as "iPod for Windows".)
Description of the Windows Installer CleanUp Utility
once the previous updater has been cleared, will the install of the new updater go through properly?
love, b

Lightroom 5.5 update file downloads just fine, but it won't run. Any solutions out there?

Hello all,
I've attempted to download Lightroom 5.5 update file multiple times. After the file is downloaded, it won't run. Is there a solution out there?
Thanks,
Mike @ Manhattan Beach

Which OS?
Have you checked that it complies with Lr's system requirements?
http://helpx.adobe.com/lightroom/system-requirements.html#Photoshop Lightroom 5 system requirements and language versions

New iOS7 update won't let me restrict iTunes radio/images for my kids. Help?

The new iOS7 update won't let me restrict iTunes radio/images for my kids. I've never had this problem with Apple before. I've always had the ability to restrict the iTunes store, and anything else I needed to restrict. I'm not a religous nut, I just don't want my kids looking at some of that stuff. I'm really disappointed with this feature. If anybody has any help I would appreciate it! Switching music to clean only blocks music, not album covers and artist pictures. I've always loved the parent friendly features of Apple. I hope they fix this soon! My family loves Apple, and I don't want to have to switch!

Hi. Yes I've looked all through restrictions and there is nothing that will block it. This is weird. Apple usually always thinks of this stuff. Usually they provide ways to both choose a parental level or block it from being used all together. I can't do either. On some of my devices I want to restrict what I'm seeing/hearing from iTunes radio but on some I want to block it all together. I've been all through restrictions and there is no option for either.

My instagram account won't link in with my iphone please help

my instagram account won't link in with my iphone please help... I can't upload any of my photos to instagram

Won't like to what? Are you saying you can't access your camera roll from the Instagram app? Check Settings>Privacy>Photos and make sure Instagram is set to "On". You can't use the share button from a photo in your camera roll to post a picture to Instagram if that's what you're trying to do. That's not a feature of iOS.

Premiere Elements 8 update 8.0.1 won't install

I can't get Premiere Elements 8 update 8.0.1 to install. It claims I need to close "elements 8.exe.". first, but as far as I can see, it isn't open.
ALSO I can't get the Adobe techs to answer the phones even though I must have let it ring 50 times on two occassions this afternoon.
May 24, 2010.

I had just gotten the Premiere Elements 8 last week from the Adobe website and had been able to download it and install it successfully....then, when I saw that a critical update was available, I downloaded it, too, but it wouldn't install, and you know the rest.
It's possible that after the initial download of the program, I hadn't properly cleared everything. But, we'll see now how the program works for me.
Thanks again.

Windows Updates won't install - Error 0x80072EFD

Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

HT1557 10.9.2 update won't update on my imac 2010 at all, and now my computer won't shutdown or restart without a hard boot. Did anyone have this same problem and figure out how to fix it?

So for the past few weeks I've been trying to update the 10.9.2 update on my imac (2010 - 21.5 inch) and when I attempt to try to update the software my screen goes grey with a Software Updater top bar the shows up on the top of the grey screen and then just quits doing anything (except the screen saver which works after nothing else happens - and that shows you how long I've been waiting for the grey screen to magically do something. I've attempted downloading the software update then installing it but the same thing happens. I don't think any of my 3rd party software is the cause of this and i'd rather not uninstall the programs since the update won't even do anything. Utility is telling me nothing but the usual ARD element unable to be modified.
With the several failed attempts at installing this update (probably around 15x) my computer will not shutdown nor restart on command anymore. The only way I can shut it down is holding the power button.
I used to have so much faith in Apple products and used to be a devoted user, but since Jobs passed away the direction of Apple has gone down the toilet.

Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply. Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself. I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues.
This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative. This turned out to be a complete waste of time just being a public forum with no Apple employee involved. I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question.
BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.} No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you.
So again Babowa you were so wrong...... and I am right.
Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine.

Lightroom/Elements Help/Updates won't link to web

Similar Messages

Maybe you are looking for