Lightroom error after picture recovery

Hallo All,
Since 3years my partner is using Lightroom.
Last year he had done a format C, but because he had recently changed the names of his multiple hard disks, he formatted the wrong one.
He had erased all of our pictures by mistake...
We were able to recover some of them but their are some problems, we can see the pictures in lightroom but then we see some warnings and cant change/access the pictures.
Some pictures have a question mark next to them (warning is: picture missing) and some have an exclamation point behind it (warning is: some problems have occur in lightroom while reading this picture).
I am not at all a lightroom user and even less a computer expert, but since all of my daughters pictures (since she is born) were lost, i hope to be able te retrieve some of them...
You can find a print screen of the errors i see... Since we can still see the pictures in lightroom I have some hope that not every picture is lost...

Nathalie,
When Lightroom imported your pictures it made previews of all of them. That is what you see in lightroom, even though the master images are missing. The previews are of slightly lesser quality than the orginals, but lots better than nothing at all. There is a free program that will let you view and create JPEGs from the preview files. It is called LRViewer and is available here:
http://mac.softpedia.com/get/Graphics/LRViewer.shtml
Hal

Similar Messages

Windows Installation Error after Full Recovery

Hi,
I upgraded a Satellite A135-S4656 from a 160GB hard drive to 320GB hard drive. I did a full recovery with the recovery cd's. At the end of the recovery, I the following message:
"Windows setup could not configure windows to run on this computer's hardware"
After saying ok to the message above and rebooting. I get to the Windows Vista splash screen and then i get the following message:
"Windows could not complete the installation. To install Windows on this computer, restart the intallation."
I ran the recovery once again and went through the whole recovery - still get the same messages.
Your help with this will be appreciated.
Hard drive info
Toshiba 320GB 2.5 SATA HDDR320I02X

if you know how to partition the hdd try to split that hdd into two 50/50 and re-run system recovery again.
=========================================================
the only easy day was yesterday.....
=========================================================

2106f Error Code after Internet Recovery Attempt

Anyone ever get a 2106f Error Code after Internet Recovery Attempt? What next?
Background: Macbook Pro (late 2011) shows startup progress bar, goes ~ 1/10th of distance, freezes, then goes black after ~2min. Did this:
1. Clean startup attempt (shift)
2. Zapped PRAM (option command P R)
3. Reset SMC, Startup
4. Attempted Internet Recovery process (Cmd R) over ethernet connection, but after several hours, got the -2106F error.
MacBook Pro 2.2 i7 Late 2011

How long were you able to watch this movie before it crashed?
Now is it everytime you boot up, you get the BSOD 0xc0000001 ?
Can you start up in SAFE MODE?
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."

DB_PAGE_NOTFOUND error after recovery on a CDS database

I am getting a DB_PAGE_NOTFOUND error after recovery, with a database that is configured in CDS mode. The error occurs after I insert several rows, bring down the process, remove the environment files and start the process which attempts to insert additional rows - gets a DB_PAGE_NOTFOUND error. The error persists ie. terminating and starting a new oprocess does not resolve the problem.
Amy help will be appreciated.

Assuming, that the db is corrupted and that CDS db's can get corrupted - is there any way, I can reduce the frequency of these errors by increasing Cache, page size etc.?
Following is my DB configuration:
               dbEnv_->open(envHome_.c_str(), envFlags_, 0);
                dbEnv_->set_errpfx(envHome_.c_str());
                dbEnv_->set_thread_count(16);
                dbEnv_->set_cachesize(0,(100*1024*1024),2);
                envFlags_ =   DB_INIT_CDB | DB_THREAD | DB_INIT_MPOOL ;
                envFlags_ |= DB_CREATE ;
                dbEnv_->open(envHome_.c_str(), envFlags_, 0);
db->set_pagesize((32*1024));
            db->open(NULL, temp.c_str(), tableName.c_str(),\
                DB_BTREE, DB_CREATE | DB_THREAD , S_IRUSR | S_IWUSR);
                dbEnv_->open(envHome_.c_str(), envFlags_, 0);
The platform is HPUX. The problems occurs periodically - i.e. not every time.
Thanks for your help.

Missing partitions after running Recovery from previous System Image Backup in Windows 8.1

After running Recovery from a recent Sytem Image Backup the LRS_ESP partition is now missing and the Used space on the PBR_DRV partition is reported as 95.20MB while it previously reported 9.52GB in use. The WINRE_DRV, SYSTEM_DRV, Windows8_OS and D:LENOVO partions appear to be OK.
I ran the Recover after replacing the original 500GB HDD with a 1TB. Any details/links/recommendations on recreating/correcting the LRS_ESP and PBR_DRV partitions? Thanks!

Here are the before and after partition details obtained through Partition Wizard:
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Error during Backup/Recovery settings configuration

Hi all,
Using the Oracle Enterprise Manager 10g Application Server control,
i am configuring backup/recovery settings for my infrastructure tier in a 10g Rel 2 application server environment. however after specifying the various locations for Log Files, Configuration files, Metadata repository database backup etc i get the following error after clicking the 'Ok' button.
An Internal Error has occurred while performing the operation.
Performing configuration ...
oracle_sid: cinfra
The command /oracle/appn/oracle/infra/perl/bin/perl /oracle/appn/oracle/infra/backup_restore/bkp_restore.pl -m configure -h /oracle/appn/oracle/infra -f > /infrahome/backups/log_files/2009-12-06_17-13-38_output.log failed with return code 255
i am at a loss as to why i am having this error and how to fix it.
I examined the log file and saw an error snippet saying
*"Unable to get dbid from the database. Please ensure that ORACLE_HOME and ORACLE_SID are set to the same values used when starting up the database and that the database is open.... Failure: Configure failed"*
Also examined another file generated at the same time as the output log file and in there i saw the following
*"ld,so.1: oracle: fatal: relocation error: file /oracle/appn/oracle/product/10.2.0/cm2t/lib/libjox10.so: symbol kgestKguard_: referenced symbol not found*
*ERROR:*
*ORA-12547: TNS: lost contact*
*SP2-0751: Unable to connect to oracle. exiting SQL*Plus"*
Apart from the infrastructure database, i have another database with SID 'cm2t' on the same machine and i am suspecting that OEM Application server control is referencing the wrong file while it's doing it's work. How do i tell it to look in the right place if indeed that is the cause of my problem?
In my config.inp file all the right parameter values are in place.
Thanks.
Steve.

Hi AMN,
Thanks for your reply. I managed to solve it by taking the following steps.
I use the runstartupconsole.sh script to start up my infrastructure tier. At startup it was using an LD_LIBRARY_PATH pointing to that used by an existing Oracle database instance on the same machine.
I set ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH etc correctly before running the runstartupconsole.sh script and after that i was able to setup my backup/recovery settings properly.
I hope this will be useful to others.
Steve.

Error after Restoring Datafiles in Archivelog but missing archive log files

Hi all,
I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files. Yesterday night i have restored my DB .
I m happy to have my datafile contents till yesterday morning.
But after restoring when i try to open th DB, i m facing the following errors:
SQL>          Startup open;
Oracle instance started but in mounted stagell
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL>         alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
          ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL>         recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
ORA - 01112: media recovery not started
SQL>   recover;
ORA-00283: recovery session cancelled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
Alert Log File:
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes                = 80
sessions                 = 96
event                    = 10191 trace name context forever, level 1
sga_max_size             = 633339904
shared_pool_size         = 301989888
shared_pool_reserved_size= 30183260
filesystemio_options     = setall
control_files            = E:\ORACLE\IE6\ORIGLOGA\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\ORIGLOGB\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\SAPDATA1\CNTRL\CNTRLIE6.DBF
control_file_record_keep_time= 30
db_block_size            = 8192
db_cache_size            = 301989888
compatible               = 10.2.0
log_archive_dest         = E:\oracle\IE6\oraarch\IE6arch
log_buffer               = 2854912
log_checkpoint_interval = 0
db_files                 = 254
log_checkpoints_to_alert = TRUE
dml_locks                = 4000
undo_management          = AUTO
undo_tablespace          = PSAPUNDO
undo_retention           = 43200
recyclebin               = off
remote_os_authent        = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes      = 1
background_dump_dest     = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
user_dump_dest           = E:\ORACLE\IE6\SAPTRACE\USERTRACE
core_dump_dest           = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size           = 2097152
sort_area_retained_size = 0
db_name                  = IE6
open_cursors             = 800
optimpeek_user_binds   = FALSE
pga_aggregate_target     = 402443468
workarea_size_policy     = AUTO
statistics_level         = typical
PMON started with pid=2, OS id=804
PSP0 started with pid=3, OS id=9580
MMAN started with pid=4, OS id=5840
DBW0 started with pid=5, OS id=8136
LGWR started with pid=6, OS id=8712
CKPT started with pid=7, OS id=1620
SMON started with pid=8, OS id=7084
RECO started with pid=9, OS id=9576
CJQ0 started with pid=10, OS id=9156
MMON started with pid=11, OS id=6000
MMNL started with pid=12, OS id=2856
Sat Apr 18 04:01:29 2009
ALTER DATABASE   MOUNT
Sat Apr 18 04:01:33 2009
Setting recovery target incarnation to 1
Sat Apr 18 04:01:33 2009
Successful mount of redo thread 1, with mount id 1124466585
Sat Apr 18 04:01:33 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Sat Apr 18 04:01:34 2009
ALTER DATABASE OPEN
ORA-1589 signalled during: ALTER DATABASE OPEN...
Sat Apr 18 04:02:13 2009
alter database open resetlogs
Sat Apr 18 04:02:13 2009
ORA-1245 signalled during: alter database open resetlogs...
Sat Apr 18 04:11:05 2009
ALTER DATABASE RECOVER DATABASE UNTIL CANCEL
Sat Apr 18 04:11:05 2009
Media Recovery Start
Sat Apr 18 04:11:06 2009
Media Recovery failed with error 1610
ORA-283 signalled during: ALTER DATABASE RECOVER DATABASE UNTIL CANCEL...
Sat Apr 18 04:11:28 2009
ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE
Sat Apr 18 04:11:28 2009
Media Recovery Start
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE...
Sat Apr 18 04:17:23 2009
ALTER DATABASE RECOVER database using backup controlfile until cancel
Sat Apr 18 04:17:23 2009
Media Recovery Start
ORA-275 signalled during: ALTER DATABASE RECOVER database using backup controlfile until cancel ...
Any suggestions pls..............
Thanks & Regards,
Subbu

Hello Subbu,
> I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files.
You mean you have taken an online backup and lost all your archive log files after that online backup?
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
To perform a recovery with an online backup you will need all archive log files until the end of the online backup. If you have lost them you are not able to recover (or open) your database in a consistent state.
So the only suggestion we can do is:
You need the archive log files that were created during the online backup to perform an incomplete recovery ... if they are gone you can not restore your database.
Regards
Stefan

File sync error after renaming jpg file on desktop

I changed the file name of a photo in my desktop backup of my Treo 755p photos from the default format of Photo_[date]_xyz.jpg to Matisse by fire2_101208.jpg.
The path is:
C:\Program Files\Palm\[username]\Photos\offline copy location\7dba\Palm on Card\Matisse by fire2_101208.jpg
Now I get the following error after hotsync.
Unable to sync media file 'Matisse by fire2_101208.jpg' on desktop. Error code: 32.
OK Media with 1 message(s)
I also changed two others to
Matisse by fire1_101208.jpg and
Matisse by fire3_101208.jpg
but am not getting errors on those.
I can open the file specified so I don't think it is corrupted.
I'm using Hotsync 6.0.1.
I could not find error 32 anywhere. Is ther a list of all the Hotsync errors somewhere?
Any ideas?
Thanks,
Don
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

as far as i understood the explanation, you renamed the picture manually by going into the path that you stated in your post right?
when your rename the file, have you check if it did show the file extensions?
try to reveal the file extensions by going back to the location (folder). click on tools>folder options>view>uncheck hide extensions for known file types.
then click ok. try to see on what's the difference in the 3 files you mentioned. i suspect that the erring file has 2 jpeg extensions on it.
Post relates to: Treo 680 (Unlocked GSM)

Help! Lightroom freezes after installing.

I get this message after trying to create or open a catalog: "An error occured when attemting to change modules." Then Lightroom freezes.
I work on a Mac and have formatted and reinstalled my systemdisk with a qlean install. I had Lightroom installed and have used it for some years. But when installing the programs again I went for the Creative Cloud solution. When I tried to open my previous catalog I got this error message. And after several deinstallings and reinstallings I still get the same message and Lightroom freezes.
Anyone who can help?

Hi Ian.
Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
Best wishes,
Magne
6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
Re: Help! Lightroom freezes after installing.
created by Ian Lyons in Photoshop Lightroom - View the full discussion
Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Uncommited transactions remain after Instance Recovery

After Instance Recovery, the database seems to contain uncommitted transactions. Please provide an explanation for the following:
create table t1
as
select *
from all_objects;
commit;
create table t2
as
select *
from all_objects;
update t2
set object_id = 1 where rownum = 1;
shutdown abort;
Neither table t2 nor the update to it were committed (right?), therefore, once the database starts up t2 should not be there. On the contrary, it is still there. In the Oracle Database Backup and Recovery Advanced Guide 10g Release 2, page 11-9, explains how the uncommitted transactions are removed (rolled back) in the Roll Backward step (transaction recovery) of the Instance recovery process.
Any insight on this is highly appreciated. Thanks.

Note also following scenario run with SYSDBA privileges:
bas002> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod
PL/SQL Release 10.2.0.2.0 - Production
CORE    10.2.0.2.0      Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
bas002>
bas002> drop table t2;
drop table t2
ERROR at line 1:
ORA-00942: table or view does not exist
bas002> create table t2
2 as
3 select *
4 from all_objects;
Table created.
bas002>
bas002> update t2
2 set object_id = 1 where object_id=258;
1 row updated.
bas002>
bas002> shutdown abort;
ORACLE instance shut down.
bas002> startup
ORACLE instance started.
Total System Global Area 192937984 bytes
Fixed Size                  1288484 bytes
Variable Size             130025180 bytes
Database Buffers           54525952 bytes
Redo Buffers                7098368 bytes
Database mounted.
Database opened.
bas002>
bas002> select count(*) from t2 where object_id=1;
COUNT(*)
         0
bas002>Message was edited by:
Pierre Forstmann

Fatal error after upgrade to Mountain Lion

Got a fatale Error after the restart on a MiniMac 2009. Even after many Power Shotdown, still Fatal Error. Now i have to install 10.7 again. It makes me mad.

you just need to repair your disks and permissions and possibly reinstall Lion after redowndloading it from the MAS.
Open disk utility from your recovery partition (cmd+R) while booting. and then try again.

DB_RUNRECOVERY: Fatal error, run database recovery

I am getting this error when trying to add data to QUEUE. But after I restart my app, this error does not happen anymore.
2009-08-16 10:27:12.558990 [ERR] mod_cdr_bdb.c:370 Unable to add cdr to Queue. Error=DB_RUNRECOVERY: Fatal error, run database recovery
Does anyone know what could be the cause of the error?

Hi,
Do you know the steps that lead up to this error? Can you reproduce it?
Were there any error messages sent to the error log file? Can you confirm that you have verbose error messages turned on by always initializing one of the error callback interfaces in your environment. This will provide verbose error messages:
DB_ENV->set_errcall, DB_ENV->set_errfile, DB_ENV->set_errpfx, and DB_ENV->set_verbose.
What flags are you using when opening the environment and the database?
The procedure you have to follow when you receive this error is described here: [DB_RUNRECOVERY|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/errorret.html#DB_RUNRECOVERY]
DB_RUNRECOVERY:
There exists a class of errors that Berkeley DB considers fatal to an entire Berkeley DB environment. An example of this type of error is a corrupted database page. The only way to recover from these failures is to have all threads of control exit the Berkeley DB environment, run recovery of the environment, and re-enter Berkeley DB. (It is not strictly necessary that the processes exit, although that is the only way to recover system resources, such as file descriptors and memory, allocated by Berkeley DB.)
When this type of error is encountered, the error value DB_RUNRECOVERY is returned. This error can be returned by any Berkeley DB interface. Once DB_RUNRECOVERY is returned by any interface, it will be returned from all subsequent Berkeley DB calls made by any threads of control participating in the environment.
Applications can handle such fatal errors in one of two ways: first, by checking for DB_RUNRECOVERY as part of their normal Berkeley DB error return checking, similarly to DB_LOCK_DEADLOCK or any other error. Alternatively, applications can specify a fatal-error callback function using the DB_ENV->set_event_notify method. Applications with no cleanup processing of their own should simply exit from the callback function.Thanks,
Bogdan Coman

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

My Mountain Lion install failed for the following reason:
OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
The message went on:
Visit www.apple.com/support/no-recovery to learn more.
The page is about a different failure, but I'm assuming the reason for my failure is this one:
The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

How to Re-activate my lightroom license after a system crash ?

Hi My computer crashed and I was forced to reformat my drives. How can I register my License as it is still active. This prevents me from using Lightroom

Hi Keith
A short desciption of my problem
History
        Installed Lightroom on my Zbook and activated my serial number
        Windows crashed and reciovery failed
        Format harddrive & re-install windows
        Downloaded Lightroom via free abode cloud interface (Dec/Jan)
        Could use lightroom until February
        Lightroom develop is inactivated ( I can see all my pictures in the Library mode)
        When I punch in my serial nr for lightroom I get the message that it is already active
I presume that the issue is that it seems that I am trying to active my license again ?
Best regards
Berne
Från: Keith_Reeder
Skickat: den 12 mars 2015 14:18
Till: Berne Parborg
Ämne: How to Re-activate my lightroom license after a system crash ?
How to Re-activate my lightroom license after a system crash ?
created by Keith_Reeder <https://forums.adobe.com/people/Keith_Reeder> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7282701#7282701>

Lightroom error after picture recovery

Similar Messages

Maybe you are looking for