Lightroom export color profiles not working as expected...

I'm trying to produce an image for a commercial printing service using the colour profile they provide.  I get the image looking the way I want in Lightroom and export it to a jpg with the printing service's printer profile.  As far as I understand it, this should give me a jpg that they can print to give me something that matches what I see on my monitor.
To test what I'm doing, I brought the jpg up in photoshop, and used the view/proof setup/custom to proof the jpg with the service's colour profile.  I thought that doing this would show me the same image in photoshop that I had in Lightroom.  That doesn't seem to be the case.  The colour balance is about right, but the saturation and densities are out -- the photoshop version show less contrast.
So, is there something wrong, or am I misunderstanding the way color profiles work?
Thanks for any info.
Doug

To use the profile for softproof, that is viewing it on a calibrated monitor in the profile. You can either try the new softproofing plug in, or open the file from LR into PS in whatever you usual working colour space is (I would suggest ProPhoto) do not at this stage attach the profile.. In photoshop go to View, Proof setup, custom. In the Device to Simulate, select the profile, then choose either Perceptual or Saturation in rendering intent. Check black point compensation and bioth Simulate Paper color and Black ink, if these are available (this depends on the profile). You will now be viewing the image as it will be when printed as long as your screen is accurately calibrated. You can also select gamut warning under view and see which colours lay outside the gamut of the profile.
Whe you have finished just save the file. Export from the print module from LR with the profile attached and send to your printer.

Similar Messages

  • Color replacement not working as expected

    Hello -
    I'm touching up some artwork and I've tried using both the color replacement tool as well as the color replacement adjustment and neither is giving me the results I would expect.
    The image has been indexed and I'm not using anti-alias so it's pretty easy to select the colors I want to change and the ones I want to replace them with.
    However, when I try to change the color, it's not replacing it with the exact color that I selected but a lighter version of that color instead.
    I created an example to show what I am talking about.
    In the example I used the color replacement tool.
    First I eyedropped the color I want to put in place of the wrong color.
    Then I use the color replacement tool (mode: color, sampeling: once) and click and drag over the wrong color.
    Instead of matching the color in the foreground (that I had eyedropped) it replaces it with a lighter version of the foreground color.
    I was having the same problem when I was using the replace color adjustment.
    Please see the attached file for my example.
    I was able to get the effect I was looking for by first using mode: color then switching to mode: luminocity and going over the same area a second time.
    It would seem that there should be a way to do it in one pass.
    Any help is appreciated.

    That is the way the color replacement tool works, its an old tool.  Color has three parameters, say hue, saturation and lightness (luminosity) as one parameter set. You would need to change all three for the kind of match you are looking for. The color replacement tool lets you change in one click either Hue, or Saturation, or both of these (Color) or Luminosity. In other words ther is no setting for all three. For that you need two applications of the tool.
    You should try the color range command on a separate layer with a mask to protect those areas of that color you want to keep and see if that fits your needs.
    Paulo

  • Profiles not working as expected

    I have created a simple publication for a webi report  using efashion uiniverse. It's in BO 4.0. I have created 2 profiles. One is State=California and another is Month= 2. If I add any one of the profile to the publication, it works fine.
    Example:
    Case 1: when I add the profile state=california to the publication, i get data for only state=California.
    Case 2: If i remove the profile state=california and add profile month= 2 to the publication , then i get data only for month=2.
    Case 3: Now if I add both the profiles state=california and month=2, i get data for sate=california and for all the months. The profile month=2 doesn't get applied.
    what's happening is that the profile which is added first is getting processed while the profile added second is not working. If I add the profile month=2 first and then profile state=california, then only month =2 gets applied and not state=california.
    Is there any settings that may be causing this behaviour?
    Below is the log :
    2012-01-17 01:57:44,072 INFO  [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Running publication instance.
    2012-01-17 01:57:44,519 INFO  [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - The global delivery rule for this publication was met; publication processing will now begin.
    2012-01-17 01:57:46,168 INFO  [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Document jobs started for scope batch 48,721 [recipients "PGOWDA" to "PGOWDA"].
    2012-01-17 01:58:31,695 INFO  [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Distribution jobs started for scope batch 48,721 [recipients "PGOWDA" to "PGOWDA"].
    2012-01-17 01:58:42,272 INFO  [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Distribution to destination CrystalEnterprise.Managed was successful. Recipient: PGOWDA, Document Scope: Sales Revenue by Sates : 48730 (Excel) : (AND (IN_LIST Month "3" )(IN_LIST State "California" )).
    2012-01-17 01:58:42,797 INFO  [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Publication scheduling complete.

    If I'm not wrong there are some considerations you must apply in your publication. Check in this guide:
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
    Page: 942 Chapter Managing profiles
    regards
    Erika

  • ICC Color Profile Not working bootcamp

    Hi,
    I have a photobooth and am trying to get my sub-dye printer up and running on windows 8 bootcamp but when i load the icc color profile for it it doesn't seem to make a difference. Just wondering if its something to do with drivers thats stopping this from working or if anyone has come across this before. I have re-added it, removed and re-added printer etc but it just doesn't make a difference.
    Thanks

    Ah-the driver is name is:  mcpd-mac-pro9000ii-10_68_1-ea11.dmg
    First thing I tried to do is delete and re-download new driver, but no luck.

  • Color profiles not working in snow leopard 10.6.2

    I have got a new imac 27inch running snow leopard 10.6.2. It replaces my old Powermac G5 with 10.4 Since 10.1 (bought in 2002)I have had a photoshop/epson 9600 workflow doing all color management in photoshop and selecting no color management in the print driver. In 10.6.2 the colors on screen are fine but the printed output is very wrong it looks like the paper profile is being stripped out and replaced by srgb or something. What has apple done with color management in snow leopard and how can I get my print color back as the prints I now produce are unsaleable and I printing is my livelihood.

    I am having the same problem. With ColorSync color management on, the prints come out muddy. If I select Canon for the color matching the prints turn out much better, but they're still a bit red. I'll be interested to see if they get this fixed.

  • Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

    My problem is pretty easy to reproduce.
    I created a project from scratch with a view model.
    As you can see in the setter of "Age" property I have a simple logic.
        public class MainViewModel : INotifyPropertyChanged
                public event PropertyChangedEventHandler PropertyChanged;
                private int age;
                public int Age
                    get
                        return age;
                    set
                        /*Age has to be over 18* - a simple condition in the setter*/
                        age = value;
                        if(age <= 18)
                            age = 18;
                        OnPropertyChanged("Age");
                public MainViewModel(int age)
                    this.Age = age;
                private void OnPropertyChanged(string propertyName)
                    if (this.PropertyChanged != null)
                        PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    In the MainPage.xaml 
         <Grid x:Name="LayoutRoot" Background="White">
                <TextBox 
                    Text="{Binding Path=Age, Mode=TwoWay}" 
                    HorizontalAlignment="Left"
                    Width="100"
                    Height="25"/>
                <TextBlock
                    Text="{Binding Path=Age, Mode=OneWay}"
                    HorizontalAlignment="Right"
                    Width="100"
                    Height="25"/>
            </Grid>
    And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
        public partial class MainPage : UserControl
            private MainViewModel mvm;
            public MainPage()
                InitializeComponent();
                mvm = new MainViewModel(20);
                this.DataContext = mvm;
    I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
    Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
    Case 1: Debugger is attached =>
    TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
    Case 2: Debugger is NOT attached => 
    TextBox value will be "18" and TextBlock value will be "18" - CORRECT
    It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
    Has something changed in SL5 and logic in setters is not allowed anymore?
    Configuration:
    VisualStudio 2010 SP1
    SL 5 Tools 5.1.30214.0
    SL5 sdk 5.0.61118.0
    IE 10
    Thanks!                                       

    Inputting the value and changing it straight away is relatively rare.
    Very few people are now using Silverlight because it's kind of deprecated...
    This is why nobody has reported this.
    I certainly never noticed this problem and I have a number of live Silverlight systems out there.
    Some of which are huge.
    If you want a "fix":
    private void OnPropertyChanged(string propertyName)
    if (this.PropertyChanged != null)
    //PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    Storyboard sb = new Storyboard();
    sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
    sb.Completed += delegate
    PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    sb.Begin();
    The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
    Please don't forget to upvote posts which you like and mark those which answer your question.
    My latest Technet article - Dynamic XAML

  • Subtraction of two key figures normalized to result not working as expected

    Hello SAP Community!
    I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
    In order to explain the problem I am facing please analyze below text:
    1) Let's assume I have below data:
    LOAD MONTH  PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
    200805         PLANT-A  MAT-1            200805         510,235.00
    200805         PLANT-B  MAT-1           200805          74,240.00
    200805         PLANT-A  MAT-1           200806         438,721.00
    200805         PLANT-B  MAT-1           200806          74,240.00
    200805         PLANT-A  MAT-1           200807         356,981.00
    200805         PLANT-B  MAT-1           200807          74,240.00
    200806         PLANT-A  MAT-1           200805               0.00
    200806         PLANT-B  MAT-1           200805               0.00
    200806         PLANT-A  MAT-1           200806         510,235.00
    200806         PLANT-B  MAT-1           200806          74,240.00
    200806         PLANT-A  MAT-1           200807         438,721.00
    200806         PLANT-B  MAT-1           200807          74,240.00
    2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Comparison Units (June 2008) 510,235.00  438,721.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Comparison Units (June 2008)  74,240.00   74,240.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
    we normalize forecats to results an we get the below report:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
    units, for both number of units and %. The report now look as below:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  1.77%       2.74%
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %  -1.77%      -2.74%
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    5) PROBLEM:
    In my report, the "Delta base vs. comp. units %" is not working as expected and
    calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
    So my report looks as follows:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  71,514.00  81,740.00 <<<WRONG!!
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %       0.00        0.00
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    The formulas are:
    a) Delta base vs. comp. units %
      Delta base vs. comp. units % = Comparison Units % - Base Units %
    b) Delta base vs. comp. units
      Delta base vs. comp. units = Comparison Units - Base Units
    The KFs
    - Comparison Units %
    - Base Units %
    Are RESTRICTED key figures (restricted to Base and comparison month variables) which
    are setup as:
    1) Calculate Result As:  Summation of Rounded Values
    2) Calculate Single Value as: Normalization of result
    3) Calculate Along the Rows
    The KFs
    - Delta base vs. comp. units %
    - Delta base vs. comp. units
    are FORMULAS setup to:
    1) Calculate Result As:  Nothing defined
    2) Calculate Single Value as: Nothing defined
    3) Calculate Along the Rows: user default direction (grayed out)
    Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
    Any help is highly appreciated.
    Thank you.
    Mario

    Hi,
    The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
    I hope this will solve your issue.
    Regards,
    S P.

  • Export to Excel not Working

    Hi
    I'm using JDeveloper 11g TP4 and in Firefox 3.X export to excel not working
    Regards,
    JavaDeVeLoper

    Java developer,
    Firefox 3.x is not one of the documented supported browsers for 11g TP4 (FF 2.0.x and IE 7 are).
    I'm assuming by "export to excel," you are talking about an adf faces table?
    John

  • Events in SubVi not working as expected

    Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
    I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Main.vi ‏11 KB
    SubVi.vi ‏12 KB
    SubVi_2.vi ‏15 KB

    Your main problem is DATA FLOW.  A loop cannot iterate until EVERYTHING in it has completed.  So, as you have it, you have to have both event structures execture before you can go back to look for the next event.  So if you insist on having these subVIs, they need to be in seperate loops.
    BTW, you can get away with a single subVI.  Go into the VI properties and make it reentrant (preallocated clone).  Then each call of your subVI will have its own memory space.  A lot easier to maintain that way.
    And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Main_MODTR.vi ‏10 KB

  • Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

    Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

    It seems there's a workaround here:
    https://discussions.apple.com/thread/5566037?tstart=0

  • AFS ARUN Size Substitution Not Working As Expected

    Hi All,
    I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
    I have setup some examples but it does not work as expected.
    Here is a small example:
    Say I have a size 28/30, 28/32 .........29/30....
    What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
    with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
    Any inputs will be really appreciated.
    Thanks!!

    srdfrn wrote:
    Hi YOS,
    I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing.  Would you mind posting an example (alongside an image file) that demonstrates this?
    Also, one thing I noticed is that PCX images appear to be quite dated.  Could upgrading them to a JPEG or PNG format be an option for you?
    Thanks,
    Stephanie R.
    National Instruments
    Stephanie, thanks for the reply.
    I am very sorry to state that I made a mistake.
    VAL_SIZE_TO_IMAGE indeed works.
    What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
    I tried with JPEG and it's the same.
    I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
    A panel with two picture rings.
    - SW_1 remains at the intended size and the loaded picture is not clear.
    - SW_2 will fit to picture size and looks OK.
    Appreciate your support,
    YOSsi Seter
    Attachments:
    Load_Image.c ‏2 KB
    ONEP_3Trow_POS1.JPG ‏4 KB

  • Pick color feature not working properly -- how do I reset?

    Pick color feature not working properly -- how do I reset?

    You need to contact Adobe for you billing problem this is a user four not adobe customer support.
    For your Photoshop Problems this user community may be helpful. 
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Notification "Launch the app and go to the library" not working as expected

    Hello,
    we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
    Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
    Thanks
    Martin

    Ah.
    Ok, now it's clear.
    Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
    Martin

  • DB Adapter polling as singleton process is not working as expected

    Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
    As suggested in oracle documents , below is the parameters configured in composite.xml file.
    <service name="polling_Mange_Alert_Events"
      ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
    <interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
      <binding.jca config="polling_Mange_Alert_Events_db.jca">
      <property name="singleton">true</property>
      </binding.jca>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
      override="may">1</property>
      <property name="jca.retry.backoff" type="xs:int" many="false"
      override="may">2</property>
      <property name="jca.retry.maxInterval" type="xs:string" many="false"
      override="may">120</property>
      </service>
    Below is the JCA file parameters configured :
    <adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
      <endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
        <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
          <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
          <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
          <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
          <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
          <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
          <property name="MarkReadValue" value="Processing"/>
          <property name="PollingInterval" value="10"/>
          <property name="MaxRaiseSize" value="5"/>
          <property name="MaxTransactionSize" value="5"/>
          <property name="NumberOfThreads" value="1"/>
          <property name="ReturnSingleResultSet" value="false"/>
          <property name="MarkUnreadValue" value="Pending"/>
        </activation-spec>
      </endpoint-activation>
    </adapter-config>
    This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
    Please advise to solve this issue ?

    Hi,
    1.Set Singleton property outside   <binding.jca> like this:
    <binding.jca config="polling_Mange_Alert_Events_db.jca"/>
      <property name="singleton">true</property>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
    2.Also you can try setting these values in jca file:
    <property name="RowsPerPollingInterval" value="100"/>
    <property name="MaxTransactionSize" value="100"/>
    3. try to increase the polling interval time.
    Regards,
    Anshul

  • TCP Window sizing not working as expected for Windows server 2008 R2 SP1

    Hi ,
    TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
    Please help.
    Thanks,
    Pro1962

    Hi,
    I think window auto-tuning is enabled.
    You can disable it by running the following commend.
    netsh interface tcp set global autotuninglevel=disabled
    Hope this helps.

Maybe you are looking for