Lightroom export is not working

Does any one has any ideas?

Give us the details.
What happens when you try to export. If there is an error message, please quote it exactly as it appears, word-for-word, verbatim.
What is your operating system? And is it 32bit or 64bit?
What version of Lightroom?
How much memory does your computer have?

Similar Messages

Lightroom Export Droplets not working on large exports...

I've been noticing that Lightroom will not run my droplet after export if I am exporting more than about 10 images at a time. If I only highlight about 10 images and then export them, the droplet will run fine. But if I highlight all the images, or even 20 of them for export then Lightroom just doesn't run the droplet afterwards.
Has anyone else seen this? For now I have given up and just run the batch job from within Photoshop.
I'm using Windows XP SP2.

It's down to the total length of file+folders names that can be passed via the command line.
To maximize the number of files that the droplet runs, export to a root folder such as D:\ - it keeps the total path name short.
John

Exported HTML not work in my host.

Exported HTML not work in my host.
The program works fine. Looks good in the browser preview and published in businesscatalyst, but when i exporting as html and upload it to my server is bad, all misplaced.

Thanks for the reply.
Everything is apparently copied and permissions are well.
Watch this please.
So it should be seen:
http://koldo01.businesscatalyst.com/
It is seen:
http://www.koldofuentes.com/

Include in Export does not work in APEX 3.1

I have a report with many columns. On screen I only show several columns, but on export to CSV I want to include all columns.
However, when "Show on Report" is set to No, and I want to set "Include in Export" to Yes on the "Print Attributes" tab, it does not get updated.
It only gets updated when the "Show on Report" is set to Yes.
It also seems that the "Include in Export" on the "Report Attributes" tab is not in sync with the "Include in Export" on the "Print Attributes" tab the first time you access the "Print Attributes" tab.
Question: Does "Include in Export" only works for columns which has the "Show on Report" set to Yes? If Yes, how can I achieve the above mentioned?
Guido

Marc,
After some investigations the following can be concluded:
On the Report Attributes tab, pick a column, and set "Show Column" to Yes, "Include in Export" to Yes, and no conditions.
I do not want this column to be printed, so on the Print Attributes tab, set the "Column Width" to 0.
When you run the report, you will notice that the column is not included in the export to CSV and not printed.
Setting the "Column Width" to a value greater than 0, the export to CSV works fine, but the column is also printed.
You can have a look at page 1 at at http://apex.oracle.com/pls/otn/f?p=261 (demo/ankpm)
Thanks Patrick for your solution (:REQUEST LIKE 'FLOW_EXCEL_OUTPUT_%'), it works great. The column is now not show on screen but included in the export to CSV. However, you have to set the column width to a value greater than 0.
An enhancement request for 4.0 could be to also have a property "Include in Print", and that this property and "Include in Export" are not dependent on the "Show Column" value.
Guido

Aperture export is not working, "Choose" buttons also not reacting

Suddenly I can't export versions, originals, metadata and export as library anymore. Also all "Choose" buttons do not react anymore. For example its not possible to open another Library or choose the external photo editor in Preferences. If I login with my second useraccount Aperture does work just fine.
On Monday I had no problems at all. Sofar I did the following things:
FIRST.
Repair Diskpermissions and Verify disk which was OK.
Moved to desktop following files:
~/Library/Preferences/com.apple.Aperture
~/Library/Caches/com.apple.Apertue
~/Library/Containers/com.apple.Aperture
Emptied the trash and restarted. The problem is not solved.
SECOND.
All the above actions and restart.
Aperture Photolibrary first aid, "Repair Permissins" , "Repair Database" and "Rebuild Database".
The problem is not solved.
THIRD.
Uninstalled Aperture and removed all files containing the frase "Aperture" (as far as these files had any connection with the application).
Repair Diskpermissions and Verify disk which was OK.
Emptied the trash and restarted.
Installed Aperture from DVD and update via Apstore.
Still the same problems so I am asking the form members for help.
Mathieu

Are you having any troubles wiht other applications run from this account?
From what you wrote you seemed to have covered all the bases not sure what else to suggest. What is the system?
Do you have any plugins installed in Aperture ? What about any applications, plugins etc, for this account?
You can try doing a safe boot (hold the shift key down as soon as you hear the start up chime. Hod it until the Apple appears on the screen) Safe boot takes longer to come up, there will be a status bar at the bottom of the screen while it boots. Once it is up you will see Safe Boot in red letters at the top of the screen on the login page. This might not work if you have File Vault turned on.
Once booted in Safe mode log in. Aperture use to not run in Safe mode because the graphics card is restricted but I believe in 3.5. it will run. Note everything will be slow and jerky.
See if that makes a difference. Once done testing boot normally and try it again.

Oracle.ifs.admin.export.ExportUsers NOT working in SILENT mode

I'm trying to export my CMSDK users via the commandline script (since the GUI tool MAKES YOU SELECT EACH USER ONE AT A TIME!!!) but it is not working. The CMSDK doc incorrectly tells you to run oracle.ifs.admin.export but I've found that you have to run ...ExportUsers. However my def file has the runsilent attr set but the GUI app still pops up???? Below is my script
#!/bin/sh
IFS_ROOT_HOME=$ORACLE_HOME/ifs
export IFS_ROOT_HOME
. $ORACLE_HOME/ifs/common/bin/ifsunixcmds
. $ORACLE_HOME/ifs/cmsdk/bin/system/ifssetenv
CLASSPATH=${IFS_CLASSPATH}
export CLASSPATH
java -Xmx64M oracle.ifs.admin.export.ExportUsers /d01/app/oracle/product/oas904mid/ifs/cmsdk/export/export-users.def
And here is my def file...
IFS.EXPORT.RunSilent=true
IFS.EXPORT.Username=system
IFS.EXPORT.Password=manager9ifs
IFS.EXPORT.Service=IfsDefault
IFS.EXPORT.SchemaPassword=gapp1969
IFS.EXPORT.LogFile=export-users.log
IFS.EXPORT.USER.ExportedUsers=bdillon
IFS.EXPORT.ExportSetName=dev-users
IFS.EXPORT.ExportToPath=/d01/app/oracle/product/oas904mid/ifs/cmsdk/export/
IFS.EXPORT.ExportTreeSize=50
IFS.EXPORT.USER.GetAllAncestors=true
IFS.EXPORT.USER.GetDirectAncestors=false

Pl see your other thread here - libxp.so.6
You cannot terminate an install before successful completion and expect things to work flawlessly ;-)
Srini

Export function not working in Internet Explorer

so i've got a report displayed in IE, but when i go to export to any file format, IE opens a new tab and that's it. depending on certain settings (like adding the server to intranet zone), i can get the new tab to say nothing or "Blank Page".
i've tried adding the server to the safe zones, i've played with some tabs settings, i enabled the "run active x" options...
finally i reset all settings of IE to their defaults. i still can't figure out what i'm missing. if i copy the url to another browser the export works fine, as expected. on another machine i found this "rsclientprint 2008" addon so i downloaded
that but i still got nothing.
on a working machine, when i click the export button, a new tab opens with the name of the reporting server in it, it thinks a bit, then that tab closes and i get the "open or save" message in the original tab. on the one that's not working, it
opens the new tab, DOESN'T show the server name and that's the end of it. so it seems like it can't connect to the server on the export function. (but report creation works just fine)
anyone know of anything glaring that i'm missing??
~if this were /. this sig would be funny

good call - i'll try that now.
the app i had installed before was Classic Shell so that Windows Explorer's (win7) left hand pane doesn't jump around on you when you double click.
i just completely uninstalled the application and rebooted. still nothing.
going to do a repair while classic shell is uninstalled. brblol
UPDATE:
so i couldn't run the IE installer (per MS suggestions) because i have a newer version. so i tried the fixer that i found here:
http://support2.microsoft.com/mats/ie_performance_and_safety
and it found the following "errors":
Issues found
Data Execution Prevention disabled
Detected
Enable Data Execution Prevention
Not Run
Security settings
Detected
Reset Security settings
Not Run
Pop-Up Blocker disabled
Detected
Enable Pop-Up Blocker
after fixing, the problem still exists!
~if this were /. this sig would be funny

Photoshop CS5/Lightroom 3 integration issue - "Edit Copy with Lightroom Adjustments" does not work

When clicking "Edit Copy with Lightoomroom Adjustments" from Lightroom, I get an error in Lightroom 3 complaining that the Camera Raw plug-in is not up to date; full message below.
"This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.1 for full compatibility.
Camera Raw version 4.6 is the latest version available for Photoshop CS3. If raw file support for your camera was introduced after Camera Raw 4.6, the Photoshop integration features in Lightroom require Photoshop CS4 and the latest Camera Raw version 5 plug-in.
The version of Camera Raw plug-in currently installed is 0.0."
After I click "Open Anyways", Photoshop CS5 is initiated but it seems to have lost context of why it is opened and asks me what file I want to open (i.e. the Open As dialog).
"Edit Copy" and "Edit Original" from Lightroom 3 works as expected and opens images fine in Photoshop, CS5 however.
My installation is on Windows 7. I currently also have Lightroom 1.4 and Photoshop CS3 installed. Everything worked fine with the old configuration. I also tried the same workflow in Lightroom 1.4 again just now, which is now linked to CS5 instead of CS3. The "Edit Copy with Lightroom Adjustments" also work just fine.
Things that I have tried but do not worked:
I did an Update via the Help -> Update menu, and also manually downloaded the Camera Raw 6.1 plug-in.
Blew away the Photoshop preferences file
Made sure that Lightroom 3 points to Photoshop for editor
I'm thinking that I'll try uninstall CS3 next. Anyone else encountered this issue?

[CS5.1 (12.1) ACR 6.5RC / LR 3.5RC; MacbookPro 4gb Leopard 10.5.8 ] As a Lightroom instructor, up until now this has been a vexxing problem to explain to my students. Even if ACR in Photoshop is up to date (I just downloaded 6.5RC and installed the PS Plugin), I still get the error when attempting to edit from Lightroom 3.5RC. I deleted the PS prefs file to no avail. I was not willing to re-install Photoshop as a solution (per some blog's suggestion), although that might be the ultimate answer. But what an ordeal if so!
For a solution, I went back to a resolution I devised when I had a CS3 compatibility problem with LR3. I went into the Preferences of Lightroom and manually chose the Photoshop app as the "custom" image editor. I went back to edit the file in PS from Lightroom and the ACR error disappeared. Try it. Yes, this means you need to use the Custom editor as your image editor, but it seems to have resolved the issue.

I tested Adobe CC then bought an educational license with another ID. Lightroom Mobile does not work anymore.

I tested Adobe CC then bought an educational license with another ID. I cannot use Lightroom Mobile. Message "Evaluation version has expired is displayed" and information in Preferences showing the old ID, not the new one. Disappointing support from Adobe. How to get rid of the old information and solve the problem?

Thanks but it did not work. Adobe (USA, not France) solved the problem. My subscription was not correctly entered in the database, it seems.

Import/Export statement not working..

Hi all,
   I want to export some data from BADI & Import it back in user exit.
I wrote following line of code in BADI
       export P1 FROM xstr to memory id 'ZABHI'.
& following line of code in User Exit
      import P1 to xstr FROM memory id 'ZABHI'.
After export sy-subrc becomes 0 hence export statement is working fine but when aftr import xstr remains blank.(sy-subrc = 4)
I tried to execute same code in single ztest abap program & it works fine there.
Thanks in advance.

hi abhijeet,
you are most welcome....
to delete, use
** deletes the data to save wastage of memory
delete from database indx(xy)
client sy-mandt
id 'ZABHI'.
you need to delete it coz, its available to all programs in the R/3
server via the ID and you don't want anybody to view the data u are
sending into memory.
the statement that u used earlier was program specific and hence
not accessible to the user exit.
Regards,
Samson Rodrigues.

Lightroom 4 Does not Work with plugins

I installed my Lightroom 4 upgrade yesterday and I like the changes. However, the new program does not work with any plugin including Elements, NIK software and others. Adobe should not have released the full program until they had ensured that all will work.
I have a MAC OS Lion. I went to the NIK homepages and followed their instructions to uninstall all prior versions and download the latest version of their software to install. I followed these directions and nothing happened. So I tried Adobe's own plugin, Elements 9, and that too did not work. Then I tried a few others I have from OnOne and other developers, but nothing works.
Then I called Adobe where a recording told me they are very busy with complaints about Lightroom 4 and hung up. Then I tried to get a tech rep to chat with me, but got the same results as I had gotten with my call.
Why does Adobe sell a product that fails such a basic issue? Why did they not work it out with the Beta edition before selling the progrm? I understand why Beta programs often have trouble, that's why they are Beta, but I do not understand why Adobe would sell a flawed product and then prevent their customers from getting tech help.
Ed

Actually, the LR4 beta worked fine with respect to this issue. It wasn't until the full version was released that some people started experiencing the problem of being unable to access the external editors and plugins from LR.
The problem is being worked on, according to a reply on the feedback forum:
http://feedback.photoshop.com/photoshop_family/topics/lr4_external_editor_failure

Report Export - Spreadsheet not working for one User: ECC6, SAPGUI710

Hi,
Our setup: SAP ECC6, Solaris10, Oracle 10g, SAPGUI Patch 9
Normal download like List ->export ->Local file is working
But when user click excel icon (list ->export->spreadsheet) it is not working and even it is not giving any error message.
Only one user ID we are getting problem, all other user ids are ok.
There is no issue with his work station or SAP GUI patch level as for other user id on his workstation export function is working fine. One more info with this problematic user id export function is not working in any workstation.
Any thing we need to do with user parameters/user settings or authorization????
Anyone faced this problem eralier . . .
Advance thanks

It is not hte problem with workstation, as for other user ids on his workstation working fine. Also with his user id on other machines also not working.
Regarding trace in ST01, how to switch the trace for other users as there is no user selection option???
Is it ok if I procedd as below:
1. ST01 -> Edit menu ->Write to database
2. Selected all trace components
2. General Filters ->under "Trace for User Only" I give this problematic user id.
3. From menu "Goto" ->"Save Trace file in" I give this user id, client and time
But I am getting following message when I click "Analysis"
No records that correspond to these search criteria found
regards

Export Button not working properly in custom OAF page.

Hi,
I have a custom page with a table region is there. There is an export button which exports the rows in an excel sheet.
But it is not working properly, as all the rows are not getting extracted.
Properties set for the export button::
Export all rows :: False
Any sugestion is highly appreciated.
Regards,
Arindam.

Hi Arindam,
Refer below links.
Mukul's Oracle Technology Blog: Implementing Export Button Functionality Programatically
http://dilipoaf.blogspot.in/2013/02/export-selected-rows-data-functionality.html
Thanks,
Dilip

Export Funtionality not working in R12

HI,
We have some custom forms that we have upgraded to R12.
But the export funtionality is not working for these forms.
When we open the form, standard funtionality like Menu> Record> Last are not working in R12.
Any body can please help in this.

Hi,
Does this happen with all forms (custom and standard)?
Please see if the documents referenced in this thread help.
Export to EXCEL doesnt work
Export to EXCEL doesnt work
Regards,
Hussein

Export functionality not working in R12

HI,
We have some custom forms that we have upgraded to R12.
But the export funtionality is not working for these forms.
When we open the form, standard funtionality like Menu> Record> Last are not working in R12.
Any body can please help in this.

You should post your question in the eBusiness-forums, maybe here OA Framework

Lightroom export is not working

Similar Messages

Maybe you are looking for