Lightroom Freezes on Import, locks up computer completely.

Windows 7 Home Premium 64bit, 16GB RAM.
I've deleted preferences file,
disconnected all the usb devices,
uninstalled and reinstalled LR,
I have copied the files from the card reader to an internal HDD and imported from there.
I have five internal drives in the Desktop, each with plenty of free space.
and it still locks up the computer on import.
I have no problem with any other task in LR other than import.
What else can I try?

Are you sure you deleted the right one? I'm looking at my preferences file and my import drop-down list sure looks like it's in there under:
AgMRUPopupList_AgImportDialog_destinationFolderPath

Similar Messages

  • Lightroom freezes during import from SD card

    OSX 10.9.5
    LR 5.4
    Macbook Pro approximately 5 years old
    This has happened all of the last three times I'm importing to Lightroom from an SD card that came out of my Nikon D7000.  I'll get about 175 photos through an import from a shoot that day.  Might have 800-1000 jpegs to import.  At around 175 the whole process just hangs.  I can still use other programs but LR is hanging.  I have to end the task (successful) but quitting LR is impossible without a Force Quit.  I've tried different SD cards, that's not the issue.  Any thoughts?

    Photos > View > Show Sidebar
    YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
    You can also make Photos the default app in Image Capture.

  • Every time I try to import photos, lightroom freezes, then crashes

    Every time I try to import photos, lightroom freezes, then crashes. Any ideas? Thanks.

    Thanks DdeGannes for the heads up- I knew that this was user-generated, but didn't know that Adobe doesn't reply directly.
    Anyways, here's my exact query from another forum pasted (it's a lot of info to retype):
    I haven't used LR 5.3 since December, and between then and now I reformatted my computer and reinstalled my basic program set. I haven't added any new programs, and if anything my current set-up should be the same as it was in December minus extra temp file bloat and a few extraneous programs.
    Fast forward to today (after taking some new photos). I open up LR, and try to import but the program hangs and eventually crashes. The exact issue can be seen in this youtube video:
    https://www.youtube.com/watch?v=Wg0uQvVoZYw
    Thinking it was a bad installation, I proceeded to remove LR, and reinstall it. No dice.
    Thinking it was a driver/program conflict issue, I booted into Safe Mode and tried to import. No dice.
    I'm all out of ideas. It looks like the issue is fairly common (judging by the number of new help threads on the Adobe Community Forums. Does anyone have any experience, or better yet, any fixes for this particular issue?
    In case anyone asks, my general computer set-up is below:
    Windows 7 Pro 64-bit
    LR 5.3
    AMD Phenom II X6 1055T
    8GB Ram
    128GB OCZ Agility 3 SSD
    1TB WD Green HD (where photos and catalog live)
    Thanks in advance!

  • Computer completely freezes when the letter "b" is typed

    Recently, our 17" Macbook (early 2008), which we bought "refurbished" from Apple two months ago, would freeze up and give the message "You need to restart..." several times a day, then there were the three nasty start up sounds after that issue. The latter was rectified with new memory, and it occasionally gives the "You need to..." message.
    However - now the computer completely freezes when the letter "b" is typed. And - No - I'm not making this up. Just freezes - the "b" doesn't show up at all. Sounds like a Monty Python routine - the one about the "travel agent". What could it be - and more importantly - should I ever buy a refurbished computer again?

    Your refurb is covered by a warranty just like any other Apple product.
    I had a refurb a few years ago and had a few minor issues with it. On the 4th trip to the "doctor's" Apple offered us a replacement and couriered a brand spanking new MBP to our doors.
    The moral of this story is, Apple do care for their customers, take yours back to the shop.

  • Windows 8.1 user with multiple external drives. Lightroom CC 2015 freezes on import. Need to have Lightroom recognize only a single drive.

    I see that Adobe still hasn't fixed this issue where Lightroom freezes up during import when a system has multiple external drives attached. Disappointing.
    A friend suggested that I configure Lightroom to only recognize the single external drive where I save my RAW files. I haven't been able to find out where in Lightroom's settings to do this.
    Currently the only folders I have in Lightroom are my local C disk and my external drive with the RAW files, (K), where I do all my editing.
    Can anyone offer advice on how I can either do what my friend suggested or find another way of dealing with/solving this issue? Currently Lightroom is almost unusable for me since I cannot add new files on my K drive to develop.
    Thanks.

    I save edited images from Photoshop into a new folder on the same hard drive my catalog is on, then attempt to import, or to right-click on the edited image and choose Open in Lightroom. Lightroom hangs in either situation.

  • Everytime I try and watch a video that is using Adobe Flash Player my computer completely freezes.

    Everytime I try and watch a video that is using Adobe Flash Player my computer completely freezes.
    I am running windows 7, firefox 4 v6, and AFP 10.1. I have tried reinstalling AFP and upgrading to the firefox beta. I first experienced this after installing ADP 10.1 and have uninstalled that program until I can resolve this issue.

    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Click Check Now to make sure the currently installed Flash plugin is up to date.

  • Computer completely freezes when trying to play video

    When I double-click on the thumbnail of a video to play it, the computer completely freezes, and sometimes the display will get corrupted with noise. I tried exporting a video file to disk, then opening it with Quicktime instead of iPhoto, and the same thing happens. I have cross-posted this question to the Quicktime forum also but I see more people talking about this problem here in iPhoto.

    I have since posting this question looked at the OS X Console, and have seen these errors, which sound correlated to my problem of playing video from a variety of cameras, including iPHone 4. I also tested playback on my newer Mac laptop and have no trouble at all.
    2/22/11 8:58:08 PM pkgutil[862] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    2/22/11 8:58:08 PM [0x0-0x13013].com.vmware.fusionDaemon[795] 2011-02-22 20:58:08.910 pkgutil[862:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    2/22/11 9:01:04 PM Quicken 2007[830] Error loading /Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec: dlopen(/Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/Apple IntermediateCodec, 262): no suitable image found. Did find:
    /Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec: mach-o, but wrong architecture
    2/22/11 9:01:06 PM Quicken 2007[830] Error loading /Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec: dlopen(/Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/Apple IntermediateCodec, 262): no suitable image found. Did find:
    /Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec: mach-o, but wrong architecture
    2/22/11 9:07:20 PM Software Update[953] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg

  • Lightroom 5.3 Import Freezes

    Okay so I have been importing images most all day and now all of a suddent Lightroom freezes at 23% when importing and never finished nor does it give any error message. I am using convert to digital negitive and import.
    I have not a clue on where to start troubleshooting this so any help would be appreactied
    Wayne
    UPDATE -
    I decided to create a new catalog (just to see if that was the issue) and that didnt correct the problem. It froze at 23% again.
    Also when I close the program, the GUI goes away but if I launch task manager, its there running and I cant end that process. I have to restart (force) as a normal shutdown doesnt work. So to me, its pointing to the 5.3 update I did today.

    This issue may have nothing to do with the camera per se.
    Try expanding the destination sub panel on the R-hand side of the import dialog and see what happens.
    Let us know if there is still an issue.
    Tony Jay

  • Lightroom freezes during file import

    Hi,
    When I try to import photos from a drive or my camera, Lightroom freezes, often while attempting to import the first photo.  Any ideas of what the problem might be?
    I'm using a Mac desktop and Lightroom 1.4.1.
    Thanks!

    Thanks a lot! That´s it!
    It took me a while to understand what you had meant and to find out, where and how to change the default setting. I did not change the preset intentionally before and I´m quite sure that LR 5.7 did not do so. There is a faint suspicion that it was done by an OS X update. Perfectly horrible!
    Thankful regards
    Rabenschleuder

  • When I run the program Adobe Premiere Pro CC I at once freezes the computer completely and to make it work I have to restart his, what do I do?

    When I run the program Adobe Premiere Pro CC I at once freezes the computer completely and to make it work I have to restart his, what do I do?

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

  • Computer freezes when importing CDs or playing songs through iTunes

    Hi! I have been searching for a solution to this problem, but have not had any luck. Whenever I try to import a CD to iTunes, my computer freezes. Just recently, my computer started freezing when I play songs through iTunes. I have noticed that some people have similar, if not the same, problem and any suggestions of things that may help are greatly appreciated!

    b noir,
    I also have had this same issue. In reading your reply, I've also saved my CD diagnostics....they are included below. I'm fairly convinced that my problem lies in the drive. It is causing WM Player to lockup as well. Please help....thanks.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 2400
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), MxlW2k (1.1.0.116),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    Connected Device Information:
    DiskDrive, ST380011A, Bus Type ATA, Bus Address [0,0]
    CDROM, Lite-On LTN486S 48x Max, Bus Type ATA, Bus Address [0,0]
    CDROM, SAMSUNG CD-R/RW SW-252S, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: Lite-On LTN486S 48x Max, Rev YDS6
    Audio CD in drive.
    Found 11 songs on CD, playing time 50:26 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:01:32
    Track 3, start time 08:56:45
    Track 4, start time 13:32:07
    Track 5, start time 18:49:72
    Track 6, start time 23:07:20
    Track 7, start time 27:44:12
    Track 8, start time 32:09:62
    Track 9, start time 36:09:72
    Track 10, start time 41:17:72
    Track 11, start time 45:47:67
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: SAMSUNG CD-R/RW SW-252S, Rev R901
    Drive is empty.
    Dell   Windows XP  

  • My computer is slow, freezes, and often locks-up. What to do?

    HP Pavilion Elite HPE 
    No matter what we do our computer is slow, freezes, and often locks-up.
    We use system Mechanic, defraging, and windows security essentials but nothing works.  Please help

    DO not  try to use things like "Double my speed. com". First thing is you didn't state how old you PC is. Have you tried clearing/deleting all history and temp files from ALL user accounts? Next, what type of anti virus do you have? Norton, just about every version is known to slow your PC, but  not to the extent of causing major frustration and they do have a start up manager which allows you to run only certain programs at start up, and will only let them run when requested by you. How much memory do you have? This is always a big factor, you may need to install more memory. I think your problem is in the memory capacity, clear out and delete files/folders not in use and you may also want to delete programs that are rarely used or programs that you may not know are installed in your PC by some download you may have performed. You also might want to look at what process are running (you might have high cpu usage) and disable what is not necessary Hope this helps.

  • ITunes & WMP freeze when importing 2nd CD

    Sorry if this is repetitive, but haven't got this figured out yet. At first I thought it was just iTunes, but i've found that WMP 11 also freezes. I am able to import an initial CD without a problem, but when I put in the next one to rip/import, my computer completely freezes and I have to power off/on to get it started again. I've tried many suggestions in this and other forums with no luck. I also contaced Gateway computer support which didn't help. Any suggestions are grealy appreciated. Here's the diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    GATEWAY MX3414
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.188),
    UpperFilters: incdrm (4.0.0.16), Cdralw2k (7.1.0.188), GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce Go 6100
    Connected Device Information:
    DiskDrive, ST9100825A, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVD-RW GWA-4082N, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: HL-DT-ST DVD-RW GWA-4082N, Rev CG03
    Audio CD in drive.
    Found 8 songs on CD, playing time 42:27 on Audio CD.
    Track 1, start time 00:02:33
    Track 2, start time 05:47:73
    Track 3, start time 11:56:65
    Track 4, start time 17:03:55
    Track 5, start time 21:43:35
    Track 6, start time 27:38:63
    Track 7, start time 33:15:63
    Track 8, start time 37:47:20
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    For anyone who may be having this same problem, I may have found a work-around! I still don't know what's causing the problem, but maybe this will give someone out there a clue to solve it. I have found a way to import consecutive CD's without the freeze-up. Try following these steps:
    1) Import the first CD (no problems)
    2) Eject the CD and CLOSE iTunes
    3) Load the next CD into the drive BEFORE opening iTunes
    4) Open iTunes and the CD imports without a problem!
    Haven't tried to see if this works around the same problem I was having with WMP yet, but suspect it does. So it appears that the problem may be with the drive or program not being able to 'reset' after importing the first CD??? Hope this helps someone figure out the root of the problem, and in the mean time hopefully you can at least get your music onto your pod without having to power off/on after every CD!

  • Lightroom refuses to import RAW files.

    Hello,
    I have Lightroom version 1.4.1 (just downloaded the update), and cannot upload RAW files from my Canon 20D or 5D. What happens is that Lightroom will either:
    (1) Upload just 12-15 files, then freeze up. The light on my camera stops glowing red and it says "busy" on the camera LCD display. After waiting 30 minutes I get the spinning rainbow ball on the screen. When I try a "Force Quit" Lightroom does not respond at all.
    -or-
    (2) Nothing at all happens! No images are uploaded, Lightroom freezes up and the camera does nothing.
    My setup is an Intel PowerMac with 8 gigs of memory, 3 1TB drives, and an Nvidia GFX 8800 graphics card. I am using OSX 10.5.4.
    I tried deleting the plist file at least 3-4 times, tried different cards in either of the cameras, and I always get the same results.
    Help!

    David
    Finally I found someone with the same problem I've been experiencing in the last 3 months.
    This problem actually started after on LR 1.4.1 but
    after I upgraded to LR 2.0, it now freezes half way on import just like you described, it actually take the OS hostage and not even force quit works, I have to force the system to shut down by pressing the power button.
    Then I tried to see if I could import with Bridge and I ran into the same problem and had to take the same action.
    I have switched cards, card readers and USB ports (used the front and back ports) but nothing seem to work.
    But when I use Image Capture to import raw files, it works fine, no problems there.
    I also upgraded the PS3/Bridge Camera Raw to the most recent version to be compatible with the LR 2.0 version.
    I also have the 20D and 5D but I use card readers instead of plugging the camera directly into the computer.
    It seems the problem is the way Leopard reads XMP data, that's something I found on a forum somewhere and it looks like Apple has not addressed this issue yet.
    I'm running Leopard on a 2.8 Gig / 8 core and 4GIGs of ram.
    For now, my solution to this problem is to import raw files from the card reader using Image Capture and down load them into my LR library.
    That's my 2 cents

  • After (or while) running firefox one certain game locks up computer

    This occurs with only one specific game. I can play the game after I boot up the computer. If I have run Firefox (or am still running it) then try to sart this game the computer completely locks up and I have to turn the power off to restart the system.

    It is 4 hand partnership hand and foot from sac-irca. I solved the problem by checking compatability mode. Now ot works!

Maybe you are looking for

  • MM - Pedido de Compra - Determinação de Preços por Data do Doc MIGO ou MIRO

    Olá Pessoal, Tenho uma particularidade neste momento que talvés possam me ajudar: A empresa onde trabalho atualmente recebe diariamente uma grande quantidade de materiais de compras e boa parte destes materiais possuem variação de preços mensal. Visa

  • How do I copy items to a folder created earlier in the script?

    Hey all. I am a self-confessed newbie. I have created a workflow that connects to a server and navigations to a particular directory and then creates a folder named via an "Ask for Text" action. However later in the workflow I want to copy template f

  • Initialize Orgchart with expanded right leaf of the Hierarchy Tree

    Hello dear all, our client has set a requirement, that I will try to describe and ask for your help . Before that, I would like to mention two things . First, we are using Nakisa Live 2.0 and we cannot change it . Second, the client considers this fe

  • Complex analysis authorizations.

    Hi all, I'm trying to model analysis authorizations given the following parameters: 1 infoprovider (basic InfoCube) 2 queries (TOPLEVEL & DRILLDOWN) to be accessed via a Portal 3 Portal roles based on CC range restrictions (‘A&C but not B’, ‘B&C but

  • Camera Raw in PS Elements?

    Is it possible to use the Photoshop Camera Raw plug-in (v.6.x) in Photoshop Elements?