Lightroom graphics card requirements?

I'm looking to get Photoshop CC & Lightroom shortly and note that the system requirements for Lightroom state 'Directx 10-capable or later graphics card'.
My graphics card is an NVidia Geforce 7900 GS which says it has DirectX support of 9.0c; however I'm running Windows 7 which say it's running DirectX 11.
So which is it ? Or does it mean Windows 7 is capable of runnig DirectX 11 but only if the card supports it too?
More importantly, will Lightroom run OK / at all ??
PS CS6 runs fine...

Hi guys,
I'm having problems with Lightroom - it freezes during/after loading. My pc is relatively old ([email protected], 4GB DDR2, GeForce 9600gt). I thought that the problem was in memory, but actually, RAM was ok, and CPU is getting stuck - Lightroom takes 100% of one core and hangs.
What should I do? My graphics card supports DirectX 9 and I have DirectX 11 installed - could that be a problem? The cheapest solution would be changing GPU, but will it work?

Similar Messages

Graphics Card requirement

I just downloaded Pixel Bender plug-in, but I get an error message that my graphics card can't handle the image. What's the graphics card requirements for PB? I have a NVIDIA GeForce 7300 GT in an aging MacPro. Thanks. Jim

I tried a 600x400 jpg and pixel bender worked. I reduced to 4000x2680 a 12 mega pixel capture from my D300 and while pixel bender launched without an error message, it froze the system when I tried to use a filter; power off button was the only way to restart. I guess my equiment is too old, or the plug-ins too unrefined for serious work. Thanks for the suggestion. Jim

Aperture graphics card requirements

When I purchased my Mac Pro, I configured an upgraded video card (X1900) to meet the minimum Aperture capability requirements, anticipating Aperture would be in my future. When Aperture provided the ability in v1.5 to reference files in user locations, I purchased this, upgraded it to v1.5.6 over time and used it successfully until the slow performance and bugs drove me to Lightroom. I presenly manage 38.000 images in this environment.
When v2.0 came out, I successfully downloaded and ran the trial version to check it out, but had no reason to move back at that time. Today, when I have again run the latest Aperture Checker before proceeding to checkout with the v2 upgrade in my cart at the Apple Store, I find "Aperture cannot be installed on this computer"!
Whew - that was a near thing. But when I check why this could be, there are only three requirements - 2.0GHz Intel dual processor (I've got 3.0GHz), 2GB memory (I've got 2GB), and (among others) an X1900 XT graphics card!
Is this correct? Has the minimum graphics requirement been stepped up since v2 was first released? Is there any guarantee that even if I was to upgrade my graphics card (which I'm not inclined to do - Lightroom runs great), the requirement wouldn't be hoisted again after I'm hooked in? I'm worried I have narrowly avoided one bait and switch, but could be the victim of another in the near term.
Can someone please provide me with some reliable buying advice?

W.W. Webster wrote:
Correction - checking more closely, my graphics card IS an X1900 XT. Now I really am confused! The problem can't be memory - it must be processor...
Actually the problem quite likely is inadequate RAM; it definitely is not the processor. In real world operation having just 2 GB of RAM in a Mac Pro is very substantially underpowered (no matter what the "application requirements" may state), and 8 GB RAM from a vendor like OWC <http://eshop.macsales.com/shop/pc> costs less than US$200.
My MP and MBP both (except for RAM) are much weaker than your MP and they both have driven all versions of Aperture just fine. Currently my MP is running the stock 7300 card.
If you still have problems after adequate RAM is on board then either a hardware flaw or setup issue exists.
Check also to make sure that none of the hard drives are too full, and with 38k images I strongly recommend that when you trial Aperture you use a Referenced-Masters Library rather than the (default) Managed-Masters Library. From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." During import also is a good time to add keywords, but that is another discussion.
HTH
-Allen Wicks

Photoshop cs4 Graphic Card Requirements!!

Hello Guyz!! I wanted to learn Photoshop CS4 on my Dell Precision 670 Intel Xeon 2.8 Ghz × 2.8 Ghz With 2Gb of Ram and Graphic Card Radeon X300/X550/X1050 Series of 128 MB n I am using Windows 7 Ultimate!! Now, I can't "Enable OpenGL Drawing" in Photoshop and I guess I will have to change my graphic card to help the cause!! Please Suggest a Graphic Card that should work well throughout my Photoshop Learning Process!! Thanks

LOL, there are 1000's of documents explaining it. You are way over thinking it.
32 bit OS can only handle 4 gigs worth of memory addresses. period. That's not saying all video ram is in use all the time, but that all video ram it is available at all times. In order for it to be available it needs to have an address so the OS can send data to it. That memory addressing is reserved at boot as a hardware requirement. In order to reserve the memory locations for hardware memory it has to use part of its 4 gig limited addressing and specify it as hardware. once its out of addresses... no more memory can BE addresed, its just that simple.
If windows reserves 1 gig of address space for hard ware, it can not address more then 3 gigs of RAM. It is that simple.
http://support.microsoft.com/kb/929605/en-us
"If a computer has 4 gigabytes (GB) of random-access memory (RAM) installed, the system memory that is reported in the System Information dialog box in Windows Vista is less than you expect. "
Answer:
"This behavior is the expected result of certain hardware and software factors.
Various devices in a typical computer require memory-mapped access. This is known as memory-mapped I/O (MMIO). For the MMIO space to be available to 32-bit operating systems, the MMIO space must reside within the first 4 GB of address space.
For example, if you have a video card that has 256 MB of onboard memory, that memory must be mapped within the first 4 GB of address space. If 4 GB of system memory is already installed, part of that address space must be reserved by the graphics memory mapping. Graphics memory mapping overwrites a part of the system memory. These conditions reduce the total amount of system memory that is available to the operating system.
The reduction in available system memory depends on the devices that are installed in the computer. However, to avoid potential driver compatibility issues, the 32-bit versions of Windows Vista limit the total available memory to 3.12 GB. See the "More information" section for information about potential driver compatibility issues.
If a computer has many installed devices, the available memory may be reduced to 3 GB or less. However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB."

AGP graphics card required?

Hi there,
I just transfered my final cut express from my imac to my macbook pro. I was able to run final cut express on my imac and it has the same ATY, RadeonX1600 graphics card as my macbook pro but when i try to start up FCE on my macbook it says a AGP graphics card is required? How do i fix this? I know i dont need a different graphics card because it was working fine on my imac. Any help would be much appreciated.
Thanks

Also, try this link in the forums. It may be helpful.
http://discussions.apple.com/thread.jspa?messageID=2144116&#2144116
15" MacBook Pro 2.16 Core Duo, 1GB RAM, 256 VRAM Mac OS X (10.4.8)

AUTODESK MAYA & MUDBOX GRAPHIC CARD REQUIREMENTS

Hi!
this is Mojopicon, from Madrid Spain...
I'm just breaking my head trying to find any solution to my 3D modeling problems
Autodesk Mudbox does not work in my mac, Autodesk Maya works but not as well as i need...
I believe that all problems comes from my graphic card, ... but i'm not sure,
My doubt is how to identify the problem (I took my computer to a top reseller and the technical service told that every worked nice...) and if in the case that i decide to buy a new graphic card wich brand and model could i buy...
last month phoning Apple service in Spain (not really, the Spanish attemption i thought is in Greece) nobody could help me...
no body knows wich graphic card i need...
Could you help me?¿?¿
in addition of the upper information i have another question, taking a look of pro graphic cards, i'm finding expensive prices... by this way i do not know exactly if i can make a investmet and buy a new mac pro (turning my old mac in a mini render farm together with the new computer..) is it a nice idea or not?¿
the graphic card: ATI 5770 1Gb or ATI 5870 that are the common GCard on the store are nice for 3D development or not?¿?¿?
thank you to everybody
best regards

The ATI 5870/5770 are, for now, the only cards being sold or offered.
There will be a Quadro 4000 $1200 (US price) vs $770 for PC, but that requires 2008 or later (2009 preferably).
http://store.apple.com/us/product/H3314LL/A
With only one PCI slot that can be configured as 16 lanes, there are limitations.
currently your Mac has?
Nvidia 8800GT
ATI Radeon X1900
OEM 7300GT
ATI Radeon 4870
http://store.apple.com/us/browse/home/shopmac/mac_accessories/displays?n=graphiccards
I think you really want something that will run 10.6.5, boot into 64-bit kernel mode, can run the Q4000 and has two 16x slots, and, is more powerful. If possible. MacPro 1,1 still sell in the US$1,000 range.
You could buy the 5770 and try it, no loss as it would work as 2nd card in newer Mac too. Or up the value of your Mac.
Test results of graphics cards (but not in your area of use, sorry)
Radeon HD 5870 + 5770 2006 Mac Pro versus older GPUs
http://www.barefeats.com/wst10g5.html
5870 + 5770 versus older GPUs
http://www.barefeats.com/wst10g6.html
http://www.barefeats.com/nehal10.html Quadro FX 4800
http://www.barefeats.com/nehal12.html GTX 285 Pro Apps
http://www.barefeats.com/nehal11.html GTX 285
http://www.barefeats.com/nehal14.html Pro Apps
http://www.barefeats.com/opencl.html OpenCL Benchmarks

Re: Satellite U400 - Is a graphic card required to play DVDs?

I have a Toshiba U400 Satellite notebook which has shared graphics with the CPU, not a dedicated graphics card. Will the notebook play DVDs ok without pausing and/or freezing up? I guess the dedicated graphics card assists with DVD playback? I realise that dedicated graphics cards are good for games and necessary to run some demanding games but is the shared graphics more than capable of DVD movie play?
Look forward to your response,
Thanks.

Hi
You can play DVDs using a notebook which was equipped with an simply and common graphic card. You dont need any powerful graphic chips in order to watch DVDs.
Ive got a U400 with an Intel graphic chip and guess what; I can watch movies from HDD, DVD or internet stream!
Greets

HP Pavilion A6603W Graphics card upgrading help.

Current Graphics card:
GeForce 7100 / nForce 630i (integrated into motherboard as a chip)
Power supply#: ATX-250-12Z-REV-D7R (250 Watts I believe?)
Computer Model: ( HP Pavilion A6603W)
Problem: Trying to figure out which is the best graphics card to upgrade with to keep up to date with the current games, such as : Battlefield, bad company 2, Just cause 2, Amnesia: Dark descent.
Now as for the power supply, I am sure Ill need to upgrade that as well. But I found a pretty reasonable one online at fry's electronics:
http://www.frys.com/product/5503410
But as for the graphics card, I am completely lost here at what I kind I can buy and not buy. most of my games require to have at least DirectX10 or higher, which my graphics card only supports DirectX 9. I have also seen that some graphics cards require power slots? I am completely new to this and I would like to have support from users.
Oh and by the way, the minimum I can spend is 250$
any suggestions?
Thank you for your time and consideration.
This question was solved.
View Solution.

Salko, to play the games that you mention, you will need a good mid-level video card. I like XFX, BFG, EVGA, Sapphire and PNY in that order. The main thing to check is the length of the card. The newer cards that are 10" or longer may not fit in the space provided. With a PSU that is at least 500W, you have allot of choices.
The Antec PSU should be fine. However, I like OCZ and Corsair PSU's for superior clean, stable power. They are both enthusiast/gamer PSU manufacturers. Check Newegg for a PSU that has allot of reviews (read them) and is rated at least 4 eggs. This is a good indicator of the quality of the product from those who are using it.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hard drive issue since installing new graphics card

Hello,
I've just bought and installed an MSI GeForce GTX 770 GAMING to replace my old SAPPHIRE HD 4890.
I uninstalled the ATI drivers and the version of PhysX already on the machine and have installed the latest drivers from the NVIDIA site and when I try to load Windows the hard drive appears to spin down and Windows just sits there (animations continue and I can move the mouse around). I can get into safe mode without a problem.
The rest of my setup is:
Windows 7 Home Premium 64 bit OS
Dell 2408WFP monitor
Antec Three Hundred case
750W Be Quiet Dark Power Pro power supply
6 GB Corsair DDR3 RAM
Gigabyte EX58-UD4 motherboard
Intel Core i7 920 D0 processor
640 GB Western Digital Caviar Black hard drive
Samsung SH-223B optical drive
I have the latest BIOS update for my motherboard.
I was a bit concerned that a power supply issue was causing the hard drive to spin down when the graphics card comes into use, i.e. as soon as Windows starts. I can get to the login screen before it happens.
I wondered if the fact that the card connects to the power supply via two 12V x 20A connections and the graphics card requires 42A might be the problem. I think I misunderstood this when I checked the power supply initially as the table in the manual shows 60A total between all 12V connections, but I didn't notice that the individual connections are only 20A. Hope that makes sense, I'm a bit new to this!
If I need a new power supply can someone suggest one? If not can anyone think of any other reason for this problem?
I would appreciate any advice.

The card itself doesn't require 42A on +12v. These requirements are for an entire system with a GTX770. While we recommend single rail psus your one should still be sufficient.
Use >>Driver Fusion<< in safemode to safely remove the AMD and Nvidia driver and reboot. Then install Nvidia latest: http://www.nvidia.com/object/win8-win7-winvista-64bit-320.49-whql-driver.html

Question About Graphics Card Compatibility

I have the HP p6-2101 that I use primarily for gaming. I was looking to upgrade my graphics card to the EVGA GeForce GTX Ti FTW edition, and I was just wondering how I could make sure it was compatible. Thanks!

Hi, There isn't any sure way to determine if a specific graphics card other than the HP OEM certified cards for your PC will work. The reality is that there is no guarantee that any particular graphics card will work in any particular PC even if the graphics card works in other PCs or even the same or similar model PCs. Know what the return policy is before you buy. Most of the newer graphics cards require that you PC runs the HP version 8 BIOS. There is a version 7.23 BIOS update available for your PC but I don't think it will help if you want to use the NVIDIA GTX 7xx ot 9xx graphics cards. ZOTAC sells some GTX series graphics cards that are compatible back to PCI-E 1.1 and these card may work with when match with the appropriate power supply. Contact Zotac for a recommendation and know what the return policy is before you buy.

Compatible Graphics Card for M9400F???

I have an HP M9400F Running Windows 7 Pro 64bit. The computer came with a ATI Radeon HD 3650
http://www.newegg.com/Product/Product.aspx?Item=N82E16883107730
I want to run Sony Movie Studio Platinum 12 these are the graphics card requirements
Supported NVIDIA or AMD GPU:
NVIDIA
Requires a CUDA-enabled GPU and driver 270.xx or later.
GeForce GPUs: GeForce GTX 4xx Series or higher (or GeForce GT 2xx Series or higher with driver 285.62 or later).
Quadro GPUs: Quadro 600 or higher (or Quadro FX 1700 or higher with driver 285.62 or later).
NVIDIA recommends NVIDIA Quadro for professional applications and recommends use of the latest boards based on the Fermi architecture.
AMD/ATI
Requires an OpenCL-enabled GPU and Catalyst driver 11.7 or later with a Radeon HD 57xx or higher GPU. If using a FirePro GPU, FirePro unified driver 8.85 or later is required.
What would be my best upgrade option? Im leaning Quadro 600 or higher but Im at my wits end trying to find what is compatible, whether I need to upgrade the 350w power supply.
I would like to run dual monitors and have a little more than what I need. I don't want to have to upgrade again for awhile I guess.
Would the Quadro 600 be compatible? That would take me from 512mb gpu to 1gb but a guy at Best Buy said it doesn't pay unless I go up to 2gb which takes me up to Quadro 2000D which is $250 more. I would do that if it doesn't really pay to even get the 600.
Sorry Im lost when it comes to this. Any advice is greatly appreciated

Quadros and FirePros are business cards, so quite expensive.
A Geforce GT640 would have 2 Gb too and work with a 350W psu.
Compare it with a Quadro FX 3700 or 3800 - it's one step before Q2000.
*** Say 'Thanks' with Kudos ***

Graphics card and power reqs

I have a quick question, as I've been reading up on PSU's lately due to an issue I'm having with my build, I have read lots of talk of graphics cards requiring lots of juice and I'm curious my card is a passive card but still a 6600GT core (I know it's not the latest and greatest) but how come it doesn't require any external power?

I had a 6600GT from leadtek , AGP version.
6600GT's have almost apx. the same power requirements (in 3D load) as a 6800GT .
For a pci-e variant around 5A of +12v in 3Dload .
A regular 6600 is quite another thing .
See:
http://www.xbitlabs.com/misc/picture/?src=/images/video/geforce6600gt-oc/6600gt_power_table-b.gif&1=1
http://www.xbitlabs.com/articles/video/display/geforce6600gt-oc.html

Graphics Card for Lightroom and also CS2 and Maybe CS3

Hi. I am still using a PC I build about 3 years ago with a ASUS P4PE mother board. It has been very good but I am wondering if it is best to now change to a later PC or, upgrade.
I have used 1GB Ram and just got another IGB to install, but my real concern is with the Graphics Card. At present I have a Matrox Millenium G550 which as I recall has just 32MB Ram. At the time this was considered one of the best, if not the best card for 2D Images. However, I now see 256 and 512 Ram cards as norm, but they always refer to being cards for games. I never have and never will wish to play any games on a PC. So advice needed please, what is considered the best Graphics Card for Photoshop CS2 and now Lightroom?
Incidently my Processor is just a P4 2.66 this has served me well so far, but!! I maywell get another PC but for now I feel I just want to try the best upgrades I can.
This is my first post here and look forward to your answers and advice.
All the best, Ron dps.

The high-powered graphic processors being sold today are fantastic for games but offer zero improvement for digital photo editing. What you have is more than enough. Increasing your SDRAM to 2GB will help the most.
Dave Huss

TS3479 I have a iMac mid 2011 with Mac OSx Lion 10.7.4. I was using iMovie suddenly today I found iMovie is not starting a window is popping up saying "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics ca

I have an iMac Mid 2011 model intel i5 with AMD Redeon HD6750M 512 MB graphic card, 8 MB RAM.
I was using the imovie the other day and down loaded some of the vedio clips from Sony camcorder.
All of a sudden today while I was trying to open the iMovie it did not a window poped up saying that
iMovie requires requires a graphic card that is compatible with Quartz Extreme................
What is these nonsence thing happening ........
Can any body provide some clue how to resolve the issue
Thanks and regards in advance
Bijan

If it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video.

Final cut pro requires you to have a quartz extreme graphics card

When I open Final Cut Pro, it says final cut pro requires you to have a quartz extreme graphics card. However, I have used the same thing for over a year already without any problems! Please help!
It's an iMac 27inch quad core late 2009

I bet you used Software update to download a few items recently (including a recent system update), and have not yet restarted your Mac. To confirm this, launch software update, and follow the instructions. Once you restart and the install completes, relaunch FCP, and you'll probably be good.
(I just did that to myself the other day).
Hope it helps!

Lightroom graphics card requirements?

Similar Messages

Maybe you are looking for