Lightroom hang when development modeule selected

I just installed lightroom 2 a few days ago. My window XP hung after select development module.
I have 3 gig of memory. I do not believe memory is the issue. I search the web and seems to be a known
issue of getting hung in lightroom 2.Is there any solution for this hang problem?

I had the same issue several months ago (can't remember which version of LR2)
If you are using an Nvidia graphics card, disabling the Nview desktop manager may improve things.

Similar Messages

Lightroom hangs when attempting to import RAW files from D750

Hi guys,
I purchased lightroom 5 sometime back to install on multiple platforms. Recently did an update on my macbook and it was able to read the NEF files from D750.
However when I installed lightroom 5 on my iMac, the prog keeps hanging when I attempt to import files from the D750. Other NEF files from my D700 were ok.
Anyone knows why?

Could be a hardware issue
Make sure the cable connection to the D750 is properly connected. Also, if possible try using a card reader. Or vice versa.

Lightroom hangs when I delete images

Hi there, I'm on to LR2 and it shares a problem I had with versions of 1.0, namely that after I've used my laptop for a while, I can't easily delete images. Symptoms: Lightroon tells me (helpfully) it isn't responding. If I kill it and relaunch, there may be a question mark against the first image I attempted to delete, which tells me it did get deleted before it hung. In this state I can delete one image at a time after killing and relaunching LR2 (it's workflow Jim, but not as we know it). If I actually reboot my laptop, I get a few minutes grace and then the problems of freezing when deleting start over, presumably as memory silts up.
System details:
Lenovo X61 tablet 1.6GHz Dual Core 4GB Ram Vista Business SP1, 200GB 7200 rpm (you'd think all this would be enough!) with every BIOS, fix and patch from Lenovo/MS applied. As a general rule my Vista/X61 combination doesn't cope well with my images (actually, more accurately, it doesn't cope well with anything; when oh when will Vista be behind us (sigh) ;-).
I import my images straight to DNG from a range of Canon cameras set to Raw. I've learnt to do absolutely nothing when importing because that will also upset Lightroom (I usually go for a coffee/write a PhD).
I've attempted to search through the forums and found nothing that seemed to relate but apologies if you solved this ages ago and I'm being tiresome.
I'd be grateful if anyone had experience/ideas or even if we could isolate a scapegoat from MS/Lenovo/Adobe whom we could victimise a little before sending to hell and damnation :-)
best,
Phil

Phill
here is the psot from Dick This is what the event will look like.
If you find it you can just higlite drag your mouse and copy it The paste it into the message block.
Lightroom 2 - Auto white balance - crash
My crash event:
- System
- Provider
[ Name] Application Hang
- EventID 1002
[ Qualifiers] 0
Level 2
Task 101
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-08-17T19:07:47.000Z
EventRecordID 1858
Channel Application
Computer PC_van_Dirk
Security
- EventData

IPhoto hangs when trying to select a book template. I am using 9.1.5 on Lion w/ a new iMac.

In trying to choose a template for a book iPhoto hangs. Is there a maximum number of pictures that can be selected? Or do you just have to use the book that comes up first?

I think there is a confusion here about when iPhoto is quiting. We are not talking about iPhoto quiting for not particular reason here, but only when you preview (or saved as PDF) a project (Card, Calendar or Book).
For Ross and I, this is the only time iPhoto is quitting on us. Otherwise it works pretty well.
I did received a call from Ted, an Apple tech today and we have tried many things to solve the problem by removing some files from the Library/LaunchAgents and Library/LaunchDeamons and this is with no luck. This is what the engineers have said to try. The other choice is to reinstall Lion, but from scratch, meaning to download Lion, install it on an external HD or USB Thumb Drive and re-install everything.
I will try to do this next week and make sure to test out the iPhoto Preview Project before and after each installation of new softwares and updates to find out what is causing the problem.
This is sad that we couldn't find what was causing the problem, because really re-installing everthing was not the thing I had in mind. At the same time I have too much legacy, I did keep the same migration from OS X Tiger and never have started from scratch since then, that's 4 OS ago!

Lightroom hangs when syncing folder with new images

I have been using lightroom for some time with no problem but today whenever I try to sync a folder that has new raw files in it, lightrrom hangs and then crashes out saying windows will notify me if it finds a solution, I have tried uninstalling lightroom and reinstalling but still get the same issue, if there are no new images it goes through the sync process fine and reports complete.
Does anyone know why this might be happening suddenly?

after several restarts and reinstalls it has started working again, cannot say what was causing the issue as it just randomly started working again.

LR 4.4.1 on Win 8.1 suddenly started to hang when importing via usb from camera

I'm running LR 4.4.1 on Win 8.1 on a fairly new toshiba laptop. Worked fine for a few months; but then I have been unable to solve the problem of Lightroom hanging when I try to import directly from my camera via USB. If I download pics from the camera using file manager, and then point LR at the new folder [once the camera is unplugged], it can then see the folder on the hard drive and will import them without issues. But if the camera is installed, going to the import screen hangs the application.
I have tried:
deleting the lock file
installing and running LR 5
reinstalling LR 4disabling all the usb drivers, rebooting, and enabling
disabling everything in the start menu
deleting the preferences file and letting LR build a new one..
I can import from the SD card reader, but I nervous about that as I have had card corrupted before and lost pics when downloading that way with other laptops.
The camera is a Sony NEX-5N.
Any ideas?
Thanks!
Steve
>>>>>>>>>>>>>>>>
event log
Version=1
EventType=AppHangB1
EventTime=130472785590834411
ReportType=3
Consent=1
UploadTime=130472785614981131
ReportIdentifier=e398cb4c-f441-11e3-8274-0c54a53b1677
IntegratorReportIdentifier=e398cb4d-f441-11e3-8274-0c54a53b1677
NsAppName=lightroom.exe
Response.BucketId=d13f242875f03ea1d90dc78320aec669
Response.BucketTable=5
Response.LegacyBucketId=-441099843
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lightroom.exe
Sig[1].Name=Application Version
Sig[1].Value=4.4.0.11
Sig[2].Name=Application Timestamp
Sig[2].Value=514b016c
Sig[3].Name=Hang Signature
Sig[3].Value=d6ad
Sig[4].Name=Hang Type
Sig[4].Value=134217729
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.768.101
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=d6ad1c1631f1be3fa0be5f93b4b2ce60
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=8549
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=8549c91a68f857408d66008876c50f3c
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=5385
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=5385dfd8333f990f69c3337328fcba6e
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=fe0a
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=fe0aee3b66393cac999a4d8bcf79559c
UI[3]=Adobe Photoshop Lightroom 64-bit is not responding
UI[4]=If you close the program, you might lose information.
UI[5]=Close the program
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=Adobe Photoshop Lightroom 64-bit
AppPath=C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4\lightroom.exe
ReportDescription=A problem caused this program to stop interacting with Windows.
NsPartner=windows
NsGroup=windows8
ApplicationIdentity=DBF4960C829DDF3499464309618C63A9
<moved from downloading,installatin,setting up - kglad>

You must have Premier Elements that recognizes Videos. Premier Elements is sometimes sold in tandem with Photoshop Elements so that both can operate seamlessly.
Amazon has got special price for buying both packages together. I believe it is a difference of about $20, i.e. you pay 20 bucks more if you buy both products.

Error Occur when trying to select Item List

Hi Experts,
Machine gets Hang when trying to select Item List in row level PO,SO ect as well as in item master Data when Pressing Star ( * ) .
and when trying to close this window then error occur as close the program and problem occur on server itself
Test Database is working fine.
worked around
1.Restarted the machine
2.Restarted services
using SBO 9.0 PL 7
OS-Window 7 Professional
Please Find the Two Error Attachments
Please help me
Thanks & Regards
Navnath

Hi
Check the below thread
SAPB1 Application Hang and Not responding when i serch item in any document
With Regards
Balaji Sampath

Lightroom crashes when rendering Develop preview under Vista 64-bit

I'm running Windows Vista Ultimate 64-bit and Lightroom 1.1 crashes every time I click the "Develop" pane. My images are DNG files without the original RAW embedded.
Lightroom ONLY crashes when I load an image in Develop. If I open Develop without any image selected, it's fine (no image is displayed). I can zoom in to 100% in Library and it works fine. Exporting images to JPG works fine. Editing photos in the Library pane is fine. The crash data is:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 1.1.0.0
Application Timestamp: 4677e8e1
Fault Module Name: MFC80U.DLL
Fault Module Version: 8.0.50727.163
Fault Module Timestamp: 4484afec
Exception Code: c0000005
Exception Offset: 0002511c
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
I've uninstalled LR 1.1 and reinstalled and it does the same thing. When I uninstall LR 1.1 and the install LR 1.0 (the previous version) Develop does open, but it doesn't render the images correctly - it looks like it misinterprets the white balance by about 1,500k degrees (very ugly), but Library shows the correct image/white-balance.
I've updated my nVidia 7900 graphics drivers to the latest version, appropriate to my OS and architecture. I've disabled XMP creation and Adobe Photo Downloader, as well as all other running applications (Antivirus, spyware, itunes, etc).
This USED to work fine in Vista and I did not make any significant changes, but I expect it's an issue with WindowsUpdate causing an incompatibility. I can't roll-back to my Vista state when it worked a month ago (that's another Vista frustration).
Anyway advice or comments would be GREATLY appreciated since this is an integral part of my professional workflow. I own a legitimate, licensed copy of both Lightroom and Vista, yet neither company is willing to talk to me unless I pay them money, which I think is complete extortion, but I digress.
Thanks in advance for your help.

Has anyone got a resolution on this? I have the same issue. Lightroom crashes when I click develop and the develop module begins to render the image. Clicking develop with no image selected allows the develop module to load however selecting develop on the menu bar and choosing either previous photo or next photo causes lightroom to crash while rendering an image.
I have a 64 bit capable HP XW8400 workstation with 2 dual core Xeon processors, 4 GB RAM, and a nVidia FX 4400 graphics card. This video card was put in as a test. the original video card was an nVidia quadra NVS something. When I ran the NVS card I used the drivers certified for Adobe CS2. I am running 32 bit Windows XP SP2 with all current updates. I do not have any MS office components installed on this system.
I read of some troubles around the Realtek HD audio driver and some Adobe applications (not Lightroom). Since I have this sound device I disabled it and removed the drivers...still crashes.
I also disabled the Intel VT in the system bios (I believe this is required to run 64 bit XP or Vista)... no change. Also disabled the NX feature...no change.
I also loaded VMware workstation 6.0 and installed Lightroom in a 32bit Windows XP SP2 VM. In the VM Lightroom works perfectly on the same machine...just not as snappy...
This stinks...Lightroom works perfectly on my poky laptop.

Bug: Lightroom 3.3 hang when importing video

On Windows, Lightroom 3.3 will hang when importing .AVI videos when the following is true:
- Move or Copy (not Add)
- Rename Files is selected
- Filename pattern includes "exposure"
Changin to a pattern that only includes date and time will make the import succeed.

If it really failed in ntdll.dll it might be a system issue. Make sure you disable all real-time anti-virus processes, and make sure your Windows system is up-to-date.
Otherwise, it will be hard to know what is going on. If it persists, open a support ticket with Adobe. Take a look in the event viewer to make sure you have all the details of the crash.

SQL Developer on Linux hangs when disconnecting after VPN reconnect

Hello,
I have a problem with using connections after general link failure (Cisco VPN disconnect in my case, lost of route to Oracle DB).
When I reconnect to a VPN and I'll try to disconnect from a previously opened (before general link failure) connection, I need
to wait more than 10 minutes to complete this process. SQL Developer is completely unusable during this time.
Steps to reproduce:
1. Connect to VPN
2. Open connection in SQL Developer to host accessible only by this VPN
3. Restart VPN
4. Try to do anything with this connection (disconnect, execute sql in opened SQL Worksheet, view tables, etc.)
This bug is not new in recent versions, I'm using SQL Developer from over 2 years and this bug was always with me. But if I remember correctly in earlier versions (<3.0) I couldn't reuse the connection to execute sql (hanging SQL Developer for more than 10 minutes) but disconnecting would succeed without a problem.
Maybe SQL Developer should move connection management to separate thread to resolve this issue... or is there another solution?
I'm using SQL Developer 3.1.07.42 @ Linux 3.0.4
For VPN connectivity I use vpnc
When I restart VPN connection I'm loosing TUN interface and all routes.
I have tested this issue on a few versions of SQL Developer on Windows XP, including 3.1.07. There is no problem with disconnecting after vpn failure on Windows.
Maybe I should fill some bug report? When I can do such thing? Metalink?
Best regards,
Irek Slonina

Hi Irek,
Possibly you can resolve this issue by altering the type of the connection that becomes non-responsive upon a VPN reconnect. What type are you currently using: Basic, TNS, etc?
In this forum thread (for Windows, unfortunately, not Linux), although different from your case, the solution used Thick/OCI driver, not Thin/Basic:
Windows 7 VPN
I have no VPN client on Linux (much less vpnc), only Cisco AnyConnect on Win XP, so I cannot test your scenario.
Regards,
Gary
SQL Developer Team

Suddenly I cannot select just one file in a folder, all of them get selected at the same time. Happens in Lightroom also when scrolling through the filmstrip. what did I do?

My Mac Pro is acting wonky all of a sudden. This all began after someone in my family spilled water on the keyboard and tried to clean it up while still turned on. I bought a new keyboard but now I cannot select just one file in a folder, all get selected. Same thing happens in Lightroom 3 when editing in the filmstrip mode, I cannot just select one photo, they all get selected. Plus, after awhile I cannot type in small letters either, just capitals. If I restart it is ok for about 15 minutes then the problems start. I did a reinstall of the OS but it is still happening. I zapped the pram, fixed permissions, etc but no luck. I am on a 2x2.4 GHz Quad-Core Intel Xeon machine with 900 gigs unused. Any suggestions?

Try also resetting smc.
Also check your keyboard preferences. And just to possibly reset some keyboard related caches and prefs you might go through the "Change Keyboard Type..." (Keyboard tab in the Keyboard preferences).

Import hangs when "Do not import duplicates" is selected

I am using iPhoto 6 with a Canon XTi camera. I import pictures directly from the camera via a USB connection. I prefer not to erase photos from the camera's CF card until I need space, as one more way to back up pictures, so when I do an import, I want to select "Do not import duplicates" and to check "apply to all duplicates" to avoid importing the same pictures over and over.
Lately, however, If I select these two options when the first duplicate appears,, the import hangs and nothing happens. After a while I cancel the import and start it again, choosing to import all duplicates. This makes the import work.
Any idea why the import would hang when I choose Do not import duplicates?
Thanks.
BC
Message was edited by: BCDrums

BC
This feature is not great in v6 of iPhoto. It will perform better if you first move the files to a folder on the desktop and then import. You can use Image Capture to move the files.
As to your specific query: try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
Regards
TD

Hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

I'm having same problem in develop module which is laggy as hell compared to LR5.8
Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment.

Developer Server 6.0 hanging when launched from Netscape 4.6

Hi, simple question to ask about OAS and Developer Server.
My Developer Server 6.0 hanging when launched from Netscape 4.61,
I am currently running...
Pentium PII 200Mz running NT sp5
Forms Server version 6.0.5.31.0 (Patch 3 applied)
OAS version 4.0.7.1.0 (Patch applied)
Jinitiator 1.1.7.18
Netscape 4.61 browser
I have all the latest versions of everything that is available,
I have followed the instructions.
I successfully connect to the OAS admin utility and have setup
all the virtual to physical directory mappings under the default
listener www. I successfully start all website OAS services.
I have Forms server successfully started up as a process
listening on port 9000.
I have two statics html files created:
a) with Jinititator 1.1.7.18
The very first time I connected to this static html file it
installed Jinitiator as expected. The Forms server splashscreen
then appears.
Jinitiator then starts up successfully, no errors appear in the
Java console. This has proved I am talking to the listener and
my virtual directory mappings are working.
At this point there is a lot of disk activity and then all
stops, the splashscreen remains and appears in the discussion
area:
FRM-9999 cannot access "koala.ilaco.gov.bo:9000" and
a series of java exceptions
I am pointing to the correct java directories (I think)
b) with out Jinitiator
When I try to call using URL with Netscape 4.61 I get a
message on the status bar saying...
Applet oracle.forms.engine.Main class oracle/forms/engine/Main
got a security violation: Method verification error
Can you help ?
If you know the answer, please let me know as soon as
posible.
Thanks for the answer....
Rgds,
Polo
null

Bart LEBOEUF (guest) wrote:
: Hi,
: I've the same problem during this week. I've resolve the
: problem by replace DLL's
: in %ORACLE_HOME%\bin by the ifwcm60.dll from Developer CD-Rom
: (\extras\sp4\ifwcm60.dll) and vgs60.dll
(\extras\vgs\vgs60.dll).
: At first time, it doesn't work. I remove my environnement
: variables
: FORMS60_MAPPING and FORMS60_TIMEOUT from my System Control in
the
: Config panel, then I reboot and surprise, it works !!!
: (Look also in database registry of Windows with regedit
utility
: in
: [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE] and remove the two
: variables if you found them.)
: I try on my two servers and it worked now perfectly.
: : Bart.
I respond your email, with my actual server configuration my
problem is now: I get the splash screen and after form is hanged.
My server configuration is:
Compaq PC, with Pentium II, the software is:
- Windows NT, with Service Pack 5
- Oracle Application Server, v.4.0.7.1.0 Enterprice Edition,
pathset 1
- Developer Server v.6 patchset 3
- My browser in this machine is Netscape 4.61
- Jinitiator 1.1.7.18 is also used.
My developer server is installed and running on the same machine
that OAS is. I am using other browser in other machine (IE5)
and trying to connect to the OAS on the first machine.
My problems begin when I launch ifsrv60.exe. I copied
ifwcm60.dll v.6.0.5.0.2, and other files required in the %
ORACLE_HOME%\bin
I forced listener Developer Server Port (
c:\orant\bin\ifsrv60.exe -listen port=9000 )
Now, I can connect with this process, with the following line:
telnet koala 9000. The listener is working now.
I tried to work with my (NonCartride-static html)forms60 form on
WEB without Jinitiator, but I couldn't.
With Netscape, in the status bar: Applet
oracle.forms.engine.Main can3t stop ERROR
With IE5, I get the splash screen and after the forms is hanged.
If I use Jinitiator:
With Netscape, in the status bar: Oracle Jinitiato: applet
oracle.forms.engine.Main inited then form is hanged.
With IE5, I get the splash screen and after that, the screen
freezes and looks like the form is hanged.
Any further suggestions on this?
Polo
null

Why is Lightroom 5 hanging when trying to export images?

Why is Lightroom 5 hanging when trying to export images?

I've been having the same issues, mainly with videos. Any resolution to your issue yet?

Lightroom hang when development modeule selected

Similar Messages

Maybe you are looking for