Lightroom- Import or Export - BSOD

I just wanted to share this information. I can not say it will work for all but it was
a particular solution to my troubles.
Had a newly built system. Gigabyte motherboard, 6 gb ram, geforce graphics card, Intel I7 chip. I had a clean install of Windows 7.
Latest driver update on all hardware.
I kept getting windows blue screen of death. BSOD when I would try to export more then 5 pictures to smugmug. I also would get the BSOD when importing images from a CF card.
It became constant and predictable, and very annoying.
The CPU would ramp up to 85% then freeze and then BSOD. RAM level was normal.
I found some random mention about a WACOM tablet driver error on a vista forum. (applies to intuos 3 and intuos 4)
Upon inspection I already had the latest driver update. I dowloaded and reinstalled the same wacom driver application. After restart I have been unable to recreate BSOD. Imported 200 images no problem, exported 45 images no problem.
To be precise in the solution you might want to uninstall your wacom driver and application. Then install with the latest driver for a clean start.
Hope this may help hep someone someday.

I don't think that you can, because the presentation uses the attributs that are in the object. You can Export the whole object.

Similar Messages

  • Lightroom Crashing on Export, sometimes on import, lots of info provided

    Windows 7 64bit
    I'm not technically naive when it comes to computers, building them and installing software but I've hit upon this issue which I just can't seem to resolve.
    I'd like the Tech guys at Adobe to have a proper look into this please. I've a lot of situational examples and it might address a problem that seems to happen a lot not just for me but others too.
    I built a new machine. A fast machine, Intel i7 3930k chip, 32gb Ram, SSD mirrored array for boot with three more SSD's for incoming, outgoing and cache drives for things like scratch, Raw Cache, Page file.
    Lightroom itself, when it works, absolutely flies so it's really frustrating to have this software not work properly when I need to import something.
    I paid for this software, it isn't a dodgy download.
    Now I'll make something clear. I'm not assuming it's the software. But the only problems I have with my build is when using lightroom.
    I've tried every version of LR4. All the release candidates and have installed the full version of 4.3 but the same problem exists.
    The problem being the import and export part of the process. It'll work fine then just decide not to.
    1. At random, it'll freeze on export. Anywhere will do. If I close the program via windows it tends to lose (some) of the previous export settings.
    2. Sometimes I'll be exporting a bunch of files, only to start export them again in a smaller format for the client. A process which normally would work perfectly ok in the previous build only to find this second import will crash the machine.
    3. Importing can be a bit rubbish too but Exporting is the biggest problem causing 90% of the hang up, stalls and crashes.
    In every instance, closing the software down in windows and restarting gives me a problem free run for a short period of time, I can run 6 exports simultaneously with no issue.
    What I've done to rule things out:
    1. Deleted and recreated catalogues on every different drive to rule out the placement.
    2. Put the Raw Cache, Catalogue and Page files on seperate drives in various combinations to see if it made a difference.
    3. Tried every release candidate and full release.
    4. Created an exclusion for my anti virus so it doesn't interfere with any of the Lightroom related folders or Lightrom itself.
    Unusual things that are worth noting:
    1. If I leave the system long enough, the 'crash' rights itself and can be looked upon as more of a stall. Like 10 minutes or so. This is true in every case that I've tried it so maybe this should be classified as a Lightroom stall issue.
    2. If I start moving around the other drives via windows, previewing other images, close explorer and reopen it it seems possible to have an effect to dislodge the stall in Lightroom, something I've noted but may be coincidental.
    Observations:
    1. I think it may be possible that Lightroom and Windows 7 are not talking to each other as they should somewhere in the process..
    2. My last system had 4.1 on it, there were no issues like this. Same OS, Same drive layout.
    What I'd like to be able to do:
    I want to be able to have a log file or something to really nail down the cause of this and fix it. Lightroom was the reason I spent $3000 on a new build. Yet despite running mile faster it often crashes negating any benefit whatsoever.
    Adobe, this is a formal request to work with me to solve this problem.
    Regards,
    Chris Giles
    www.chrisgilesphotography.co.uk

    Chris, just a heads-up - this is a user to user forum, not a formal route into Adobe support.
    That said, Adobe staff do drop in on an informal basis, so good luck getting sorted.

  • Lightroom 4.4 cannot import files exported from CaptureOne Pro8, but LR5 can??

    I am a recent new user to PhaseOne's CaptureOne Pro8 software.  I am using it for some RAW conversions, but still want to use my LR4.4 product to catalog, and further edit, those conversions.
    I have tried exporting TIFF, DNG, and JPG from Pro8, but NONE of those files can be imported by LR4.4  I can selected the file, and then LR hangs on "Importing files...".  Oddly enough, I can move to other LR modules, like Develop, and the software still works, but the import never completes.
    I downloaded a trial LR5.6 via Creative Cloud, and that version of Lightroom imports the JPG files just fine.  I have not tried to see if TIFF or DNG can be imported.
    So my questions come down to :
    Are there any LR4.4 users here who also have CaptureOne Pro8?  Can you import Pro8-exported JPGs into LR4.4?
    Is there any insight as to how LR5.6 handles files differently than LR4.4 that could explain why LR4.4 cannot load these files?
    I have no other issues with any other software package that can read JPGs, only LR4.4.  Keep in mind LR5.6 works fine, as well.
    Hmmm?
    Thanks for any help, insight,
    Mike

    BKKDon - Thank you so much for the Photoshop Family route.  I kinda found myself going in circles on the Adobe support pages, and thought this user-to-user forum was my only option for LR4 support.  Appreciate the link.
    And, I believe you have helped me greatly narrow the problem down.  I was not familiar with JFIF, and now I am.  I was able to find some utilities to essentially strip all of the APP markers within the JFIF, and now I can import those files into LR4.  I suspect that CO7 did not utilize APP marker in the JFIFs, CO8 does, and LR4 stumbles when it sees APP markers.  That's speculation based on how I made the LR4 import work, and not by doing direct inspection of different JPGs or JFIFs.  Thanks for the tip on JFIF, that gave me a lead that panned out.
    Now if I could just figure out why DNG and TIFF seem to be similarly afflicted, LOL.
    -Mike

  • Lightroom 3.6 exporting to CD/DVD is very slow

    I'm using Lightroom 3.6 for Mac and when I export to CD/DVD it takes several minutes to burn the CD.  For example, I have about 50 jpg images that I export at 100% quality and at 300 dpi with no watermarks, etc.  I can use Finder to burn to disc funtion and I can burn 2 cd's in the time it takes Lightroom to burn.  I want to be able to use Lightroom for all my processing from importing to corrections to printing to exporting on CD.  When shooting events we take the images in jpg, import and put them into folders for each client.  Once the client purchases a CD of all their images we burn the CD.  I do not want to use separate software to burn the CD if at possible.  Is there settings or something I can change in Lightroom to speed up the process?
    Thanks!!

    Thanks Lan.  I take the photos in jpg format (not RAW) in the camera, use Lightroom import and assign a sub-folder.  Once the customer reviews the photos (in Lightroom), they have the option to purchase a CD or print.  If they want to purchase a CD, I use the export feature and choose CD/DVD instead of Hard Drive and Lightroom request to input a CD and I click on Burn.  Lightroom then prompts for me to enter text for a name and then it starts the burn process.
    I hate it takes so long because Lightroom is a good all-in-one prograrm that does all I need.  The burn to CD/DVD is very nice becuase if I have more images than a single CD will hold, it will prompt for the 2nd, 3rd, etc CD until it finishes.  Other CD burning software will only tell you that it cannot burn to CD because the data is more than the CD will hold.  When in the field an event you cannot hold up sales because it is to slow to burn.  Will have to look at other alternatives besides Lightroom for this.
    Thanks again.

  • Lightroom Fails to Export Random Files

    I'm on a Power Mac PC running OS 10.4.9. Lightroom fails to import and export images on a random basis. Wow! As a wedding photographer who has to process large batches at once this flaw is absolutely fatal. Is there a bug fix in the works, or do I just have to stop using this software?
    I don't have any of these problems in Bridge which batches images wonderfully. I can't help thinking of the slogan on lightroom that goes "lightroom is for the many and photoshop is for the one" I guess that's true if I have to export one image at a time to edit in photoshop without dropping photos. But, I'm one of those crazy people who still sees a benifit to sharpening, retouching, and contrast tweaking in photoshop in large batches.

    Perhaps this is not a bug but some incompatibility within your system.
    Where do you import from? What types of files? Using a cardreader? What brand? Which import process are you using and where are you importing to?
    What process do you use to export, to what file format? What, exactly, happens when LR "fails", do you get an error message? Nothing?
    - Pierre

  • How do I stop Lightroom importing my Photoshop files?

    Hi - I have asked this question elsewhere, but perhaps someone here has had a similar experience. In my Lightroom catalogue, I often need to open a raw (dng) file in Photoshop, work on it there and save the result as a jpeg. The jpeg is then sent to a client after which I have no further use for it, so normally I would delete it. However I find that every time I 'save as' in Photoshop, Lightroom imports that file into its database. The only exception is if I choose 'save for web' in Photoshop. I'm told that this behaviour is wrong - that LR shouldn't automatically import these images. Has anyone else had this problem, and if so, how do I solve it?
    (Mavericks, LR5.3, CS6)
    Thanks,
    Alex

    I don't use Photoshop, but from what I've read, images sent to Photoshop via 'Edit In' should be 'Saved' not 'Save As'. The jpeg should then be exported from Lightroom.
    I am sure there are those on the forum with a greater Knowledge in this process.

  • Question about lightroom import

    I edit a DNG photo in Photoshop CC from lightroom 5.  If I save it as a JPG, it does not go back into lightroom.  I can not see the photo in lightroom to import it.  It shows in Windows explore but not in lightroom import.

    If you save, it will go back to LR as a tiff or PSD,depending how you have your preferences set for external editing.
    If you save as the saved file will not go back to LR, you will have to synchronize or import depending on here you saved the file.
    My preference is to let the tiff go back to LR and stack alongside tthe orgonal raw file. Makes life much simpler when trying to find files.
    If I need a jpg for email or other purposes I export one in the size and flavor (Prophoto, AdobeRGB, sRGB, etc) needed for the purpose.
    HTH
    Rich

  • Lightroom imports with 100 clarity

    Hello people,
    i have the strange problem that lightroom imports always with 100 clarity. There is definitely something wrong with my presets, just don't know how to change that. Thanks for any suggestions, tobfl

    If you apply a preset during the import process, that preset will be applied to all images that are imported. Another way to apply a preset to all images would be to have multiple images highlighted in the develop module and have auto-sync enabled.
    The first thing I would suggest that you try is to reset the clarity on one of those newly imported images, changing nothing else. Then, save new camera defaults. Then I would check in your import dialog to make sure you haven't chosen a preset to be applied during the import process. Next, take a test image and import it.

  • Importing and Exporting Data with a Clob datatype with HTML DB

    I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

    Colin - what kind of import/export operation would that be, which pages are you referring to?
    Scott

  • I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

  • Problem with Import and Export Data Wizard

    Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
    to use.
    After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
    and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
    displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
    I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
    How can I correct this problem?

    First can you please post all log file errors
    >> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
    1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
    If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
    2. You can try reinstall from start (In this case you have to make sure that you un-install all)
    [Personal Site] [Blog] [Facebook]

  • What is the best way to import and export footage from the 5D Mark II?

    Hello,
    I've just finished shooting what I am considering to be my directorial masterpiece.  Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing.  Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline.  I want to know the best way to retain resolution before I delve into this project.
    My questions:
    1)  What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
    2)  What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
    3)  What is the best way/ codec/ format to import and export/ render between premiere and after effects?  I am speaking mostly of vfx and color correction.  I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
    I know this is pretty broad, but as a solo filmmaker I really need someone's guidance.  I rarely ever finish my films with the same, crisp look as the footage.  I need pipeline help, and really appreciate it!

    ascreenwriter wrote:
    Hello,
    I've just finished shooting what I am considering to be my directorial masterpiece.  Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing.  Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline.  I want to know the best way to retain resolution before I delve into this project.
    My questions:
    1)  What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
    2)  What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
    3)  What is the best way/ codec/ format to import and export/ render between premiere and after effects?  I am speaking mostly of vfx and color correction.  I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
    I know this is pretty broad, but as a solo filmmaker I really need someone's guidance.  I rarely ever finish my films with the same, crisp look as the footage.  I need pipeline help, and really appreciate it!
    1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
    2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
    3. Use the Replace with Adobe After Effects Composition function.

  • Looking for a program that can handel import and export of palm doc files

    I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
    Could anyone give me a few suggestions of any plug-ins that would be good me?
    Hearns
    Post relates to: Palm IIIxe
    This question was solved.
    View Solution.

    Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
    Here are the clean uninstall instructioins for Vista.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

  • Error while importing the export in new environment

    All,
    I have getting AIP-11052: Writing following objects: Transport Protocol Parameter failed due to following constraint violation: TRANSPORTPROTOCOLPARAMETER_UK. UNIQUE CONSTRAINT VIOLATION
    while importing the export. Has anyone encountered this issue? or Can anyone provide pointers as to why this might be occuring?
    Any help would be greatly appreciated!
    Dipal

    Hello Dipal,
    The erros seems to be because of some UNIQUE key constraint issue while importing the export. This may be due to some conflicting import data which is causing this voilation. If it is a possibility, please purge the entire repository and have a clean import or else please analyse the UI log to find some more details.
    Rgds,Ramesh

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for