Lightroom is unable to put pix to photoshop

Hello,
I have a problem with lightroom 4.4 on my mac. I would like to put photos for retouching into photoshop cs 6. I can do this with all my photos, but not with one folder. I have just export it to a  stand alone data base but it doesn't run. The stupid is, that all the other pix can put into photoshop. I've tried to put these one folder on my imac into ps, too. Here it runs. Can anybody help me?
Thank you!

How are you doing this? heck also Permissions for that Folder using Get Info that the folder has read and write....

Similar Messages

  • I am unable to put new songs on my ipod

    I am unable to put new songs on my ipod. When I put new songs into my itunes, i see them just fine. I go to sync my ipod and it says "sync is complete" within seconds, so I know nothing has been synced. New playlists are also not showing up. Many of my default playlists show up multiple times(90s music, recently played, etc). I have the 30 gig ipod with video. There are about 20 gigs on it. Thanks.

    ok the manually manage music box was checked, I don't know how. That seemed to help. As long as I have you here perhaps you can help me with another problem that happens from time to time. My ipod likes to fall asleep when I'm syncing it. It goes to the apple icon on the ipod, stops syncing, and then starts back up again. The problem seems to go away when I restart the computer and/or itunes. I'll occassionally get an error message that says "the ipod "mullen's ipod can be synced. The required file cannot be found." Then I get the message at the top of the screen that says sync complete. In some cases it actually is synced! Any thoughts?

  • I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)

    I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)
    what can I do

    Search here or Google ... https://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

  • If I'm in Lightroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updat

    If I'm in LIghtroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updates. How can I fix this?
    If I click "Open Anyway" or "Render using Lightroom", I get the following message:
    "Adobe Photoshop CS6 cannot be opened because of a problem.
    Check with the developer to make sure Adobe Photoshop CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
    Please tell me what to do so I can edit from Lightroom to Photoshop.

    In Photoshop, if you choose Help - About Plug-in... - Camera Raw, does it say 8.6?
    Seems to me there was some hiccup they found in the update process, which prompted this:
    Camera Raw updates cannot be applied
    I honestly don't know if the problem could apply to 8.6 as well, which is why I asked you to check to make very sure you really got it.
    -Noel

  • Hi guys have a problem with my ipod touch 4 gen i deleted my music and am now unable to put music on to my ipod. when i attache the ipod to itunes it says the music is still on my ipod any ideas thanks in advance.

    Hi guys have a problem with my ipod touch 4 gen i deleted my music and am now unable to put music on to my ipod. when i attache the ipod to itunes it says the music is still on my ipod any ideas thanks in advance.

    Do a reset of everything on your ipod. Then reconnect it and it should work.

  • PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode.  Display is at recommended 1920x1080.  Is there a solution or is it a flaw in the program?

    PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode.  Display is at recommended 1920x1080.  Is there a solution or is it a flaw in the program?

    Don't have a direct answer. But did you install the updates. They might resolve the problem.

  • I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download

    I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7

    update manually:
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2014 updates:  win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

  • Adobe creative suite cs5: unable to open files in photoshop. unable to drag objects on illustrator..

    Adobe creative suite cs5: unable to drag objects on illustrator or indesign. unable to open files in photoshop, brush doesnt work in photoshop.
    In the past I uninstalled adobe creative suite cs5 from my laptop, used the adobe creative cloud cleanup tool, restarted and then reinstalled the programs and everything worked again for about a week. Now everything has gone back to the way it was again and this time the uninstalling and reinstalling isnt helping.
    Any ideas?
    Im pretty desperate!!
    Thanks
    Alisa

    Hi Alisa
    I'm having exactly the same problem. Uninstalled CS4 and reinstalled the 30 day trial of the Creative Cloud and it's stil having the same glitches, not opening in photoshop and not being able to drag/move objects in Illustrator or inDesign.
    Did you find a solution to this problem?
    Thanks
    Jenny

  • I'm losing LIghtroom processing changes when opening photo in Photoshop.  Why?

    I have been using Lightroom only for a couple of weeks.  For several years I used Bridge and Camera Raw for RAW file processing.  After noticing that every .DNG file I process in LIghtroom 5.4 and subsequently open in Photoshop-CS4 loses the Lightroom processing in Photoshop, I conducted the following experiment:
    A  .dng file that had not previously been in LR catalog was placed in folder as Original  DNG.dng.
    File was copied and named Lightroom Processed.dng
    Both files were imported into LR
    The Lightroom Processed.dng file was loaded into Develop module and Exposure set to +5.00.  (Note that original is underexposed by about 1 stop and at +5 the photo is almost completely washed out.)
    Lightroom Processed.dng was opened in Photoshop-CS4. (There was no prompt for "Edit a copy with  Lightroom adjustments".  I'm assuming it was because it was a .dng file.)  The original underexposed version was displayed is PS.  When Ctrl-S was used to save the file, a file entitled Lightroom Processed-Edit.tif was automatically saved in the same folder and imported into LR.
    I copied the Develop Settings from Lightroom Processed.dng to LIghtroom Processed-Edit.tif and the numeric exposure setting was displayed as +5.00 BUT there are slight differences in appearance and in the histogram for the .dng and .tif versions.  The .tif version is very slightly darker than the .dng version.
    I opened LIghtroom Processed-Edit.tif in PS.  This time I was prompted to "Edit a copy with Lightroom adjustments" along with the other two options for opening a copy without adjustments or opening original. I selected "Edit a copy with Lightroom adjustments".
    I can't believe that one cannot process a raw file in Lightroom and then open it in Photoshop without having the processing one does in Lightroom carry over into Photoshop.  I've never had this problem using Bridge and Camera Raw.  What am I doing wrong?
    Thanks in advance to all who can help with this problem.

    @willard, moving from a Photoshop Bridge-ACR workflow to an Lightroom workflow there are a couple important differences to be aware off.
    a. ACR/Bridge uses .xmp sidecars to read and write changes to raw files(in the case of DNG files the .xmp data is stored within the file header). ACR/ Bridge cannot read the data stored in the Lightroom Catalog. The info is in the file.
    b. Lightroom by default uses a Catalog file to read and write all that you do in Lightroom. The info is in the Catalog. There is also the option to have Lightroom also write info to a sidecar .xmp file or within the file header of DNG, TIFF or JPG files. This can also be achieved by using the CTRL/CMD-S.  This info in the .xmp or DNG files is used by ACR/Bridge.
    c. In your case the xmp data written by LR 5 which uses the equivalent of ACR 8.4 will not be fully understood by PS CS4 which uses ACR 5.x.
    d. So if you open a DNG file directly in PS CS4 there will not be full compatibly. (you may have requested Lightroom to write to the DNG file but PS CS4 cannot read it all)
    Quote "(There was no prompt for "Edit a copy with  Lightroom adjustments".  I'm assuming it was because it was a .dng file.) "
    In the Lightroom Preferences General tab> Prompts> select Reset all warning dialogs.

  • How do i download a picture from my scanner and put it on photoshop thank you

    how do i download a picture from my scanner and put it on photoshop thank you

    You don't "download" anything, and you don't put anything "on Photoshop".
    You save your image in your scanning application using whatever file format supported by Photoshop you want (PSD, TIFF, PNG, JPEG, etc.), and save it in whatever folder on your computer you want.
    Then you use Photoshop to open your image file wherever you put it.

  • Add ability for Lightroom to open a RAW file in Photoshop

    Currently, one cannot open RAW files in Photoshop from Lightroom. I realize that there are many of the same ACR 4.1 features in LR, but sometimes I just want to the open the RAW file directly in Photoshop.

    I agree with this feature request.
    I have lightroom and PS Extended. Lightroom is perfect for browsing and searching through my RAW images (much better than Bridge I find), and many times I will process the RAW in lightroom and then send the TIFF to Photoshop for further editing.
    HOWEVER, ;O) Photoshop extended has far more RAW capability. Sometimes I look at a RAW in lightroom and would like to send that straight to PS Extended to process the RAW with the extra features. At the moment, I have to manually open photoshop, search for the photo (which is a long time consumer when I already found it in Lightroom) and then process.
    This would be a very handy feature.
    It would also work perfectly with a similar extra feature to export RAW to a 3rd party program. Sometimes, after browsing photos in lightroom, I would like to send the RAW straight to Photomatix, an HDR software for tone mapping. It only works with RAW for tone mapping, but Lightroom only allows you to send a TIFF/JPG to an external program.
    These simple features would really really speed up my work flow.

  • I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

    I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

    Please refer below link for more information
    Education FAQ

  • Unable to put youtube in full screen under nightly

    Hello, when I open a youtube screen under nightly I am unable to put any video in full screen. The full-screen icon does not work. Youtube works just fine (videos get in full screen mode) under IE or under Tor-browser but not under Nightly. I reinstalled my nightly, removed all the plugins but to no result and videos from other sites work juste fine in full screen.
    Could you helps me? Thank you.

    The Nightly version is intended for alpha- software testers, not for the general public. Since Nightly is updated daily, that could be a transitory problem which might be corrected tomorrow, or that could be something that will take awhile to fix.
    You might want to check the Builds threads over here to see if any other Nightly users have that same issue, and might have some suggestions.
    [http://forums.mozillazine.org/viewforum.php?f=23&sid=4830099dbc92b2104fde108ceef24770 MozillaZine Builds forum]
    ''Viewing the threads over there doesn't need registration, but if you want to post at MozillaZine you'll need to register there. ''

  • My screen is cracked and black how do i get my photos off of the phone if unable to put passcode in

    My screen is cracked and black how do i get my photos off of the phone if unable to put passcode in

    You don't not with a crack screen.

Maybe you are looking for

  • The Network Path was not Found - Server 2008

    I am managing a Windows Server 2008.  When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found."  I am new to using Windows

  • Clear method and Garbage Collector

    Hi Gurus, Does the Clear method (hashtable, vector etc..) is a good option for garbage collection ? In other words, if I have a vector V with 100 elements and I perform a V.clear(), am I sure that the 100 elements are now candidates for the Garbage C

  • Unity Connection version clarification

    Hi, We installed UC 7.0 last January 2009 and this weekend we updated to the October 2009 release of 7.0.2(a)SU2 Where can I find a doc that describes the version numbering between the OS and the Application?  Before the upgrade my Inactive Version  

  • Big problem with upgrade to 8.2

    I have 2 different iphones from 2 different carriers with same apple ID. After upgrading to 8.2 when someone call one of the phones, both iphones rings and can answer from either one. Anyone encounter such a problem?

  • Duplicated query due to parallel development environment

    We have a rather unpleasant situation in our BW environment after our upgrade to BI 7.0 and use of a parallel BW development machine during the upgrade. Some of the queries seems to have multiple copies with the same technical name in production and