Lightroom Multiple Watermark with first export

Hi, I am using Lightroom to stamp my photos. I am a nightlife photographer and since now I 've been using other software to stamp my pics but I want to turn in lightroom. The problem I have is that it does not support (as far as I have searched and found) multiple watermarks. I need one watermark for my logo and one for the club I photoshoot. So we have two png images. What I did for the first time is I exported the images with my logo and then load them again and export them with the club's logo. I don't really like the proccess. How can I export in just one time both logos?

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

Similar Messages

Multiple movieclips with same export for AS names? Possible?

Ls,
Im working on an app for mobile devices.
Since the demensions of some of them, i.e. phones as opposed to tablets, have a much smaller screen, wanted to use different sets of mc's depending on screen size (device dimension wise, not resolution).
So a smaller device would use the mc's with larger gfx so they would still be decipherable and the larger devices could use smaller gfx so to be abale to get a larger part on the screen at the same time
- I could just scale the entire screen clip all the time, but this will slow it down too much i think
- I could create multiple instances and use different names and then sort them out run time in AS, but this would also steal processor time. Im not really for that.
- I could publish multiple versions, depending on device its for. But this would require me to maintain multiple sources on upgrades. I can feel the hurt already.
I was hoping it is possible somehow to export the movieclips as .swf's or something and then sorting out run time wich one to import/use/load.
Then, hopefully i can refer to them in my code with the same name's but they will be different sizes depending on wich i had chosen to include/load.
Makes any sense?
Any info on what's the best way to proceed is highly appreaciated.
Regards,
Mac

Kglad,
I'm not sure I understand what you mean.
I meant: if I use as object creation with as like
mc:movieclip = new someclip();
It had the dimensions it has in the library.
If I then do a
mc.scaleX = mc.scaleY = .75;
It wil change size yes.
But wont this require flash to internally resize it each time it has to paste it onto the screen/ into the canvasbitmap?
Or does it take a snapshot from the Library and use that until te next scale operation?
The reason i ask is because a: i dont know ****, b: if i resize it really small, then resize it large, it seems unaffected by the first resize to small.
So i''m thinking it still uses the same mc source, and rescales it from that all the time.
Wich would afcourse affect performance.
Highest regards,
Mac

Multiple Failures with Auto Export Private Preview for one DB

My Customer has received 7 failures so far this month for their daily exports for a specific Database. While they understand this service is in private preview,
this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate. They are not experiencing this same failure rate on any of their other production DB exports. The
error logs show the following:
Start Time: Saturday, July 05, 2014 2:08:01 AM
End Time: Saturday, July 05, 2014 2:29:50 AM
Subscription ID: <SUB ID>
Server Name: <SERVER NAME>
Database Name: <DATABASE NAME>
Operation Name: Export
Operation ID: e8f916a6-838d-457c-be3c-83257b7c039b
Status: Failed
Details: Error encountered during the service operation.
Could not connect to database server.
Cannot open database "<DATABASE NAME>" requested by the login. The login failed.
Login failed for user '<DB ADMIN USER>'.
This session has been assigned a tracing ID of 'ebc9b95b-e777-49b1-82d8-064549c6fe95'. Provide this tracing ID to customer support when you need assistance.
Can we please have an Engineer supporting the Auto Export Private Preview review this matter and the error logs further to help us understand if the multiple failures are considered
normal or high?
Thank you,
Frank Ellero
Frank Ellero - Microsoft Corporation

Hi,
The error you have mentioned points to the connectivity issues to the database.Please have a check on the below link for more information:
http://social.technet.microsoft.com/wiki/contents/articles/1719.windows-azure-sql-database-connectivity-troubleshooting-guide.aspx
http://support.microsoft.com/kb/2980233/en-us
If the issue persists, I would recommend that you have a
Technical Support Ticket opened as it would require dedicated troubleshooting.
Regards,
Mekh.

Fi-5220c with Adobe X standard scans multiple pages with first page garbled. Pls can anyone help? MK

My fi-5220c scanner which i use with Adobe Acrobat Standard X does scans with garbled first page. What am i doing wrong? I use custom scan option. thanks MK

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

Any ideas?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

What is the best spec to run multiple programs with photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?

What is the best spec to run multiple programs with numerous photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?
For a Macbook Pro. What's the least amount I need to process, upload, download images using these 3 programs?
Thank you.
pt

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

How to export multiple regions with fades to audio files

When I have a bunch of regions that I want to export to audio files Logic manages to ignore the fades I created on them. Is there any other way than bouncing every single region? Basicly I just want to consolidate (like PT) the regions fom the project including the fades.

Sorry, but I forget to tell you, that is one of my report is Interactive Report and another is PL/SQL function returning SQL query report
I know about thats two links which you posted.
I have tryed Denes Kubicek link and his exaple not worked. When I press "Download Excel" button I got excel file only with first report on it (http://htmldb.oracle.com/pls/otn/f?p=31517:108)
And his package (export_excel_pkg) have a limitation: This package will not work for Function Returning SQL type of report.
By second link, I must totally reprogramming all three my reports, thats is not goog for me.

Watermark with multiple rows of text, Is it possible?

Hi everyone,
One of our clients want the whole page filled with watermark with multiple rows of text, I cannot find related properties on the watermark configuration page, is it possible?
Thank you in advance.

Multi-line Dynamic Watermarks are available from ES3 onwards. You can create multiple Watermark text elements to have more than one line in the Watermarks. Please see http://help.adobe.com/en_US/livecycle/10.0/AdminHelp/WSb96e41f8a4ca47a94897a78313098c91af6 -8000.html
Regards,
Neerav

Although we have iPhones and iPads, this is our first mac pc and we wanted to know the best way to set up multiple users with parental contro;s

although we have iphones and ipads, this is our first imac and we wanted to know the best ways to set up multiple users with parental controls

I'm assuming you have the lastet OSX version 10.9 "Mavericks." Here are some useful links from Apple I think will help:
http://support.apple.com/kb/PH14414
http://support.apple.com/kb/PH14099
http://support.apple.com/kb/PH14280
and a video:
http://support.apple.com/kb/VI28
I suspect you have a newer iMac than the pre-2006 models this forum covers (the forum labels are unbelieveably vague). If you can confirm that yours is newer than 2005, I can ask the Hosts to move you the the forum for current iMacs, which gets many more views.

Editing MULTIPLE images with lightroom 2 corrections in CS3

Does anyone know how to send multiple images with LR2 corrections to CS3
for further editing? If I select multiple images in LR2 and click photo/edit in/photoshop cs3 only one image opens in photoshop. If I could send more than one image at a time it would greatly speed up my workflow.
Thanks

It works for me when I highlight multiple images, right-click on one of them, choose edit in Photoshop. If this isn't working for you, is it possible that your Photoshop screen mode is such that you have to switch images using the Window option on the menu?

Recent issue on multiple PCs: Preview and Export flicker/banding/moire effect

Recently we discovered one of our PC's flickering and banding in the preview window during playback and on exports. Shortly thereafter, the same issue appeared on another workstation. What we are seeing is a variation of issues that include but are not limited to the following within the preview window and more importantly in our renders:
Flicker - Video changes in brightness
Moire effect - Can see a cross-hatch pattern during playback
Banding - You can clearly make out horizontal or vertical lines, or sometimes both.
Seeing layers beneath 100% opacity layers. When two layers are stacked with footage, you can see the footage below as if the top layer is at 97% despite the actuality of it being at 100%.
These issues exist on multiple machines with differing specs, in all projects. This is neither a project or machine-based issue. All effects removed from clips within the timeline; source footage looks great in standalone player. These issues occur with a new project with a blank color matte.
Just spent 3+ hours in live chat with an Adobe Rep who remotely team-viewed to see the same issues testing project base solutions to no avail. Everything was tested from render containers/codecs, local vs server, project managing, cache clearing, etc. These same projects did not exhibit these issues a week ago.
All of these situations lead me to believe that this is a Premiere issue, something changed with how Premiere is handling our files and this is a huge issue. We are unable to deliver finals to clients due to this problem.
Ticket # 0185909669

Ran some tests. Wiped everything with Creative Cloud Cleaner Tool. Reinstalled the previous iteration of CC (not 2014), version 7.0.0 base. The issue exists here as well. Updated it to 7.2.2, same thing. Wiped everything again with the cleaner tool, installed CC 2014 Base, 8.0.0 and had the same issue, updated to current version no difference. These issues did not always exist, this is of recent coming.
We are running multiple Windows 7 and 8 machines at 64-bit. Their hardware varies per computer and all produce the same results.
We are having to make all renders from ONE mac that does not exhibit the symptoms described in the first post. This is HUGELY restricting to our business and we are having to wait on queues of renders to deliver due to this.
Exact same issue in post here: Re: Weird Horizontal Interference in Exported Video (check out the YouTube link)
HELP!!!

Is it possible to do multiple recordings with the same session.

I appologize in advance for this but here goes. I want to make several background narrations for some video clips. Using Audition 3, I start out by recording in the multitrack view on the top track. Because of mistakes, this takes several audio clips. After finishing, I rightclick on one of the clips, select bounce to new track all audio tracks and this creates a mixdown. Moving to edit view, I do noise correction, then back to multitrack where I export the mixdown as .wav.
THen I select the clips in the top track and mixdown in the next track and hit delete. However, when I hit the arming 'R" and then the record button, the cursor doesn't move more than a milimeter and then keeps going back and forth.
I was trying to do multiple narrations with just this one session, so is that possible? Do I have to do a separate session for each separate mixdown?
If there is something I'm doing wrong, I would appreciate any directions.
Thanks in advance,
John Rich

Blue_Devil1 wrote:
I appologize in advance for this but here goes. I want to make several background narrations for some video clips. Using Audition 3, I start out by recording in the multitrack view on the top track. Because of mistakes, this takes several audio clips. After finishing, I rightclick on one of the clips, select bounce to new track all audio tracks and this creates a mixdown.
Let me stop you right there, for a start, because what you are doing still isn't clear, although I think that I can guess at it...
Creating a bounce-down is not the same thing as creating a mixdown. If each of these clips you've recorded constitutes a separate file, which it will if you hit the stop button rather than pause - which it sounds as though you have, otherwise you wouldn't be able to separate them so easily - then just double-clicking on the clip will open it immediately in Edit View anyway. And the bounce-down options don't mention tracks, they mention clips - all audio in session, selected range or selected clips. Yes you get one file as a result - but it's literally just the clips as they stand run together not via the mixer, any effects or automation system - which it would have to be if it were a proper mixdown. A bouhce is exactly what it says - just bouncing the clips.
THen I select the clips in the top track and mixdown in the next track and hit delete. However, when I hit the arming 'R" and then the record button, the cursor doesn't move more than a milimeter and then keeps going back and forth.
I was trying to do multiple narrations with just this one session, so is that possible? Do I have to do a separate session for each separate mixdown?
Hmm... when I hit the delete key, nothing happens - I have to right-click to get stuff to delete like that. But you most certainly can re-record in a session, yes. If you get the cursor moving just a fraction of a mm, then almost certainly this means that instead of moving the cursor back to the start, you've moved it slightly with the mouse pressed and created a very small range.So before you record, hit the 'Go to Beginning or Previous Marker' key (next to the play looped key) and try again - it should work properly then.
And of course you haven't deleted all the files - they are still there on your system and will remain so unless you delete them outside Audition, either the hard way, or using MediaSweeper.
Your workflow is, to say the least, a little strange. If I were recording narrations (which I do sometimes), I'd record in Edit View, and keep just the files or takes I wanted. Then I'd import these into Multitrack view, arrange them, crossfade them, whatever, and then do a mixdown of the result, which would appear back in Edit View for final trimming and saving, and I'd have a file (or files) to use in the final production. This would have the advantage of not creating all these 'take' files that you have to get rid of separately in the first place, and generally keep the workflow down to a sensible number of steps.

Trying to export RAW originals from Aperature 3 to LightRoom 4: I choose File Export Originals. I think then Pictures LR. But then I can't find files in LR library.Files seem stuck in Pictures as NEF

Trying to export RAW originals from Aperature 3 to LightRoom 4: I choose File>Export>Originals. Then Pictures>LR. But then I can't find files in LR library.Files seem stuck in Pictures as NEF and or DNG files. I know Im stuck on something dumb but I am stuck. Help?

You now need to import those files into Lightroom.
BTW, Lightroom uses a "referenced" system so your images will always be in the folders you download/copy them to. Lightroom is a database first and foremost, albeit with non-destructive editing capabilities (effectively Adobe Camera Raw).

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Lightroom Multiple Watermark with first export

Similar Messages

Maybe you are looking for