Lightroom not staying connected for sync neither remember usernames.

Hi! Are you also finding that every time you want to sync your photos with the LR Mobile you you to write the login information over and over in LR5??? Quite annoying, I hope they make that persistent.

It is persistent here on both the Desktop and the iPad. Which is giving you trouble?
If Desktop: check Re: Do I really have to sign back in to Lightroom mobile every time I start? and look at response 3.

Similar Messages

Ipod will not stay connected for more then a few seconds

I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
I have not had any issues with it since i bought it which was last june.
any ideas?
John

Hi John,
I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
Connect your iPod to your computer.
Then, try restoring it in iTunes while it is connected in disk mode.
Can you successfully restore your iPod?
If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
Any success with trying that?
-Kylene

Not staying connected to sync

I just set up a sync account, in Firefox4, for two computers. It seemed to work fine; I've synced the bookmarks on the two machines, but after closing Firefox and then restarting, neither computer is still connected to sync. I have my privacy settings set to clear everything, history and data, on exit. Is there something that I need to save (cookies?, preferences?, off-line data?) in order to stay connected to sync?

Firefox Sync stores your Sync credentials in Password Manager, so they're available across restarts.
If you have Firefox set to clear your passwords on exit, then your Sync account credentials have been lost, and you'll have to set up Sync every time you start Firefox. (I hope you saved your Sync Key somewhere!)
In order to have Sync persist across restarts, you need to disable clearing of passwords. I'm also uncertain what the behavior of Sync will be if you clear your history; it should work fine, but I've never tested it myself.

IPhone 5's Bluetooth Not Staying Connecting For Continuity Support on Yosemite

Devices:
Macbook Pro Mid-2010 running OSX 10.10.2
Iphone 5 running iOS 8.1.3
*NOTE: I understand that due to the version of the Bluetooth protocol in my machine, not all continuity features are available (Handoff, Air Drop, MBP Instant Hotspot)
However SMS to IMessage and the ability to make and receive calls from my Mac should be OK according to Apple's system requirements one-sheeter:
System requirements for Continuity on iPhone, iPad, iPod touch, and Mac - Apple Support
================================================================================ =====================
Here's my problem.
I finally took the plunge last night and updated my iPhone 5 from 7.1 to 8.1.3 to access the iCloud Drive and additional continuity features integrated into Yosemite.
When I tried to pair my iPhone 5 with my MBP over Bluetooth, all seemed to go well for the first 5 seconds.
- Both devices were in discovery mode.
- Mac saw the phone and displayed a security code
- iPhone displayed the same security code and asked if I would like to pair with MBP
- Pairing took place. Each devices Bluetooth profile / device showed up in my MBP Bluetooth's Preferences and in my iPhone's Bluetooth.
- 5 seconds later, there's no connection between devices.
My iPhone displays:
"Connection Unsuccessful: Make sure [Macbook Pro] is turned on and in range." (The phone is 5 inches away)
Then sometimes I get this message:
"Connection Unsuccessful: [Macbook Pro] is not supported.
No rhyme or reason between the two either.
Here's the baffling part: When I activate my Phone's HotSpot function, the Bluetooth works and connects with my MBP allowing it to use my cell phone network's data for internet connectivity.
I don't understand what is going on or how to correct this? Can anyone succinctly explain how to correct this problems in layman terms?
If the devices can communicate long enough to exchange security codes and verify their identities, then use Hotspot, there is clearly a data exchange happening. Where is the break down taking place when it comes time to stay connected to so I can continue to use the limited continuity features.
I've seen this question posted before by people having problems with many different model years of MBP including the most recents models, so I know it's not mutually exclusive to my model year, but cannot seem to find clarity on an answer.

Lawrence Finch
ShadowDancer1000 wrote:
I wish Apple would have provided more detail on how it worked. I wouldn't have posted this if I new that SMS & Mac Calling had nothing to do with Bluetooth pairing.
You mean like this? Get help using Continuity with iOS 8 and OS X Yosemite
Please note how Apple articulates this though.
Check your settings
Check the following settings on your iPhone, iPad, or iPod touch:
Go to Settings > Wi-Fi and turn on Wi-Fi if necessary.
Make sure your iOS devices are connected to the same Wi-Fi network by going to Settings > Wi-Fi and comparing the name of the network each is on.
Go to Settings > Bluetooth and turn on Bluetooth if necessary.
Go to Settings > General > Handoff & Suggested Apps and make sure Handoff is on.
Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Sometimes things have to be explained in more detail for the general consumer who has been conditioned for decades to think about wireless cellphone audio / light data to [anything other device else] connectivity in a certain fashion. That is to say Bluetooth dependent ...
For the non-technical person, which overwhelmingly many Apple users are, they would see that bulleted point and think if Bluetooth is not paired and active, then they would not received the full scope of their Continuity features.
It would have been better for the copywriter who wrote this to (*) footnote this entry and explain that while Bluetooth recognition may be necessary between Yosemite and iPhone, SMS Push to iMessage and Mac Calling does not require an actively paired connection as these functions are dependent on iCloud and both devices being registered on the same WiFi network.
Thank you to all who helped me get my mind around and figure this out.
It has also opened my eyes to how iCloud has become a critical link in Apple's overall walled garden and business strategy.

Has anyone solved the Outlook .dll not staying checked for sync?

I have tried reinstalling everything and updating everything I know to update. When I start outlook 2003 that second .dll still gives me a runtime error. So I have to manually check it every time I want to sync.
Thanks for any tips out there.

Thanks. I should have stated it isn't disabled. It just crashes at launch. It tries to start but just won't stay checked.
-Ken

8520 would not stay connect to WIFI

Hello everyone...i been having a strange problem with my 8520..I connect though my sister Iphon but I have to mager proglem
1. she has to turn her WIFI and Hotspot on/off for my phone to fine it...
2. it doest not stay connected for long..even thou it say on her phone that i am connected
it seem i am the only one who is having this problem
any ideas ???
Thank you

Couldn't find a solution the problem only when I try to connect through a phone like (Iphone) so the best thing is just pay a plan or connect though a router
I love my BB but I found out 3 problems
1. The connection though a another phone
2. If you have a plan you can't use WiFi
3. If your plan expired you have to put another sim card than put your sim card to connect thought a Wifi
So I am not 100% happy with my BB but i'll mange

TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer

Why is my ipad3 not staying connected to and remembering my password to router

After upgrading to ios 6.0.1 my ipad3 has a few problems.
1. The internet is slow slow slow...to connect to even common websites, like Apple, Google etc.
2. It is not staying connected to my router for wireless and is forgetting the password for
   connection to the router.
Other computers(ipad1 and pc's) in the house do stay connected and do not have the slowness to
connect to sites.
I have done resets, cleared history and cookies and so on but nothing seems to make any
difference.
Appreciate any advice.
Thanks
Gary in Oregon

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
~~~~~~~~~~~~~~~~~
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
 Cheers, Tom

I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

IPhone 4 does not stay connected to internet over 3G+

I have an iPhone 4 on the telus network running the latest version of the os 4.3.3. My phone will not stay connected to the Internet most of the time. It looses connection and won't reconnect until I turn on airplane mode and then turn it back off. It also looses connection if I have wifi on and it detects a network but choose not to connect to it. I have restored my phone and it fixed the problem for half a day before it started again. I only have a couple months warranty left, is this covered do you think?

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

Iphone 4 does not stay connected to my network

Since upgrading to 6.1, my iPhone 4 does not stay connected to my network. I have to input my password each time I leave my house. My other devices stay connected, so the issue is with the upgrade. Has anyone found a way to keep their IPhone connected to their network? Thanks.

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

HP Officejet 6500A Plus not staying connected to wireless network

Just picked up a HP Officejet 6500A Plus e-All-in-One Printer - E710n the other week and set it all up and it was working wonderfully. But I noticed after it goes into sleep mode it disconnects from the wireless network and doesn't reconnect.
I will get a overview of how I have it all set up.
I have a DSL modem with a TRENDnet TEW-639GR router connected to it. I have set my router to reserve IP addresses for the computer and printer. That way I can leave the computer and printer wireless IP settings as automatic and they will always get the same IP address. I do this for the wireless network at my parents place as well and it works perfectly with their HP Photosmart C7280.
I also set up the HP ePrintCenter feature on the printer so that I can print by sending the printer an email. When I first set it all up this was working great. I tested it all and it was awesome. When I would log onto the ePrint website it would show as connected and it was all good.
So then what happened was it was all fine then the next day when we want to print something the computer says the printer is offline. I go on the HP ePrintCenter website and it says not connected. I print out a wireless network report page and it says not connected. After I printed that test page, I guess it woke up the printer enough or something as it then connected to the router and printed fine as well as showed up as connected on the ePrintCenter website. So all was good. Then the next day the printer goes to sleep and again it shows as disconnected.
Should it not be staying connected in sleep mode? How will the printer know something is being sent to it and that it should wake up if it is not staying connected?
Any suggestions of what I should change with the settings? I suppose I could try setting the IP settings as static on the printer itself but I shouldn't need to as I set it to static on the router. When it finally does reconnect it does always keep the same IP. If that is what is required I guess I could do that but then what is the point in having an automatic setting if it doesn't work? I would rather have this issue fixed that have to do a work around for it.
Thanks in advance!

Hi,
The printer should stay connected to your wireless network after the printer enters the sleep mode.
This is not an expected behavior.
I believe such an issue may be caused due to a signal quality or any conflict as too many broadcust on the same channel.
Please try the following steps in order to better understand the issue:
Follow the Wireless Setup Wizard if your printer currently disconnected
Enter the Setup menu.
Enter the Network menu.
Click Wireless.
Click Wireless Test Report.
What is the signal quality provided by the report and what channel used to broadcast by your router?
If you may scan and attach the report, it may help to better understand any possible cause.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My Macbook will not stay connected to the internet, while my Dell computer works fine. Why? What can I do?

My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.

Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
OpenWEP (insecure) or WPA2(AES) is the only secure standard.
..WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots
Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
If your still having trouble after this, take both machines back to the store for a free evaluation.

My Mac does not stay on for even 5 minutes without being plugged in. Why?

My Mac will not stay on for even 5 minutes without being plugged in. It just completely shuts itself off. It started doing it and I went in and cleaned up some stuff, but it just kept getting worse. Not I'm lucky to get 5 minutes out of it. Why?

Battery Information:
Model Information:
Serial Number:          DP-ASMB016-38ea-829b
Manufacturer:          DP
Device name:          ASMB016
Pack Lot Code:          0002
PCB Lot Code:          0000
Firmware Version:          0110
Hardware Revision:          0500
Cell Revision:          0200
Charge Information:
Charge remaining (mAh):          1493
Fully charged:          No
Charging:          Yes
Full charge capacity (mAh):          1771
Health Information:
Cycle count:          253
Condition:          Check Battery
Battery Installed:          Yes
Amperage (mA):          841
Voltage (mV):          12549
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Automatic Restart On Power Loss:          No
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
Charging:          Yes

Lightroom not staying connected for sync neither remember usernames.

Similar Messages

Maybe you are looking for