Lightroom performance issues after updating to new iMac

I was using a late 2013 iMac with 3.5 Ghz i7 and 3 TB Fusion Drive and 32 GB of RAM, and had very good performance.
I recently upgraded to a retina iMac with 4.0 Ghz i7 and 512 GB SSD and 32 GB of RAM. I also bought a LaCie Big 1 TB external drive that has 1,300 MB/s read/write speeds, and put my Lightroom library, photos, and ACR cache on that drive.
Given these changes, I would have expected an increase in performance from my previous system. However, I'm seeing the opposite. In Lightroom when I apply a preset, I sometimes get a spinning beach ball for a couple of seconds before it applies. In Photoshop, using Google Nik filters, I when I move the sliders the effect isn't instantaneous as it used to be; instead, I see large chunks of the screen redrawing.
All other applications on my system seem to be running very well. Photoshop and LR both open faster than they did on my previous iMac. But using them seems slower, which perplexes me.
Any ideas?

Ah, I wondered if it might have something to do with the retina display. I tried what you suggested and made the LR window about 1/4 size of the display. I was then able to apply presets instantaneously, with no lag at all (much faster than my previous system). I also opened some images in Photoshop and the Nik filters, and reduced the window size. The Nik filters are still a bit more "laggy" than I would expect, but overall there was an improvement.
Is Adobe planning on updating the max preview size given these new displays?
I wish I would have considered this prior to purchase. Probably wouldn't have stopped me, because the retina display is so stunning, but the lag is really annoying.

Similar Messages

HT201321 my Apple wireless keyboad and Mouse dosent work since one Month after geting the new iMac 27 !Would getting the Osx 10.7.Bluetooth utility repaired after updating onto 10.7.5 & Admin Tools 10.7.5 ?

Hi Dears
My Apple wireless Mouse and keyboard dose not work since one Month after getting the new iMac 27 !
The Bluetooth assistant could find the Devices for few seconds but can not pairing them ? at least get an error
Operation system is already of version 10.7.5 updated ,but no use ?!
Could getting the Os x 10.7.5 Bluetooth utility repaired after updating to Admin Tools 10.7.5 ?
When not ,than advice me please to repair or solving this problem ,

Your problem is likely due to
com.paceap.kext.pacesupport.snowleopard 5.9.1
I would recommend tracking down the app that uses this and unionist all it completely from your computer. Also if you have upgraded the RAM on the machine you may have a RAM falling DIMM or it may have become unseated or it might not be the correct specs for your machine.

Performance Issues after an Upgrade

Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- Krrish

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

Wy my battery life in my blackberry Z30 is very bad after updating to new os 10.3.1.156

Dear blackberry
Wy my battery life is very bad after updating to new os 10.3.1.1565
Before update the battery life it was better... please help me regarding this matter. My device is Z30 and I love it very much . Please help me.
Kind regards
Abdulrahman.

zenesa wrote:
Dear blackberry
Wy my battery life is very bad after updating to new os 10.3.1.1565
Before update the battery life it was better... please help me regarding this matter. My device is Z30 and I love it very much . Please help me.
Kind regards
Abdulrahman.
Hi @zenesa! Welcome to the BlackBerry Support Community Forums!
When did you perform the update?
The phone needs a few days for the OS to settle and sync your data, It's normal for the first few days to shed battery life faster than normal.
Don't forget to read this helpfu article about BlackBerry 10.3.1 Battery Tips (Battery Saving Mode is a great feature)
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

HT201210 error 3014, can't restore iPhone after updated the new version of itune

after updated the new version of itunes, my iphone can't back up and restore.
Why everytime update the new version of itunes have problem????

See Network connection or download errors
Error 1479: This error occurs when trying to contact Apple for an update or restore. Quit iTunes, disconnect from USB, restart the iOS device, reconnect the device to the computer, then launch iTunes and attempt to update or restore again.
Error 1639: See this article for resolution.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good networ

Performance issue after DB copy

Hello,
I am facing performance issue after doing database copy. Let me explain entire story.
Enviornment is Oracle 10g (10.2.0.4), Operating System is Solaries.
We have one production system with DB sid (PR1) and i have to builded new system using PR1 as PR2, we have done full offline copy from one hardware to another hardware (Hardware is same on PR1 and PR2) and perform rsync command at os level to sync all oracle files at OS level(PR2 is not build using backup/restore or export import method).
Now problem is that
One of query if i am running on PR1 system it is taking only 10-15 seconds, while if i am running same query on PR2 it is taking nearly about 55-60 mins. In initial search i found SGA is very diffrent from PR1 to PR2 then i did change the SGA parameter like PR1 in PR2 after doing changes i am running same query it is taking 6-7 mins, so i got some benifit here, but still i need to tune the query. Query contains 3 tables and all tables having atleast 3-4 indexes.
Can some one help what to tune and what to check?
Thanks,
Singh

Check the explain plan on both systems to see if both instances are trying to do the same thing. This will tell you a lot about what is going on based on physical or logical reads and how long they are taking. You should have the same statistics on both databases if you did a physical copy, but check that too just to make sure. If stats and explain plan are the same, check your hardware. Do you have the same amount of RAM on both systems? Are you using similar storage? If the plan is showing that you are doing a considerable amount of physical I/Os on both it could just be that your physical disk is slower on server two.

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do

After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do.

There was something you could have done, bought extended warrenty, would have covered this. Apple is outside of it's one year warrenty policy, they had the agreement, and when you update you also sign an agreement that you would be responsiable for any problems that occur.
The best thing you can do is the Out of warrenty for 199$; you didn't get additional coverage; something bad happen, be glad they offer the OOW.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Performance issues after upgrading to 11g

hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
     5 DELETE APPLSYS.FND_ENV_CONTEXT
          4 COUNT STOPKEY
               3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
                    1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
                    2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
Ofer

Please see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein

Plz hlep my : iso 7 4s /There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz hlep me
<Personal Information Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz plz plz hlep me
<Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

Lightroom performance issues after updating to new iMac

Similar Messages

Maybe you are looking for