Lightroom photo export error

When i export several photos it will export every one then at the end it will say that a certain # of photos did not export. I dosen't say why. Does anyone have any idea.
Windows XP, LR 1.3.1,
Michel

The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help

Similar Messages

Lightroom 1.1 Export Error

I just upgraded to Lightroom 1.1. Now I can't export. I get an export error message pop up.
I have tried to exporting from a file (left menu) and from collections (left menu). Both render an export error message.
When trying to export 16 photos, here is the message I get:
"An error occurred while exporting. 16 folders failed to export."
Am I missing something here? It worked really well in V1.0.

I am also having problems with 1.1 and exporting. I attempted to batch about 3,000 RAW files to JPG the other day. I selected the folder and chose my export settings. Then it began to churn through them as normal. The goofy thing is that when they finished about 3hrs later only 250 of the 3000 were on the disk. LR gave me an error, "Unable to export 25xx pictures" with no other information. I have about 300gb free on the disk and am using a Inspiron 1705 with 2.2ghz core 2 duo and 2gb of ram. I don't understand why it would continue to act like its exporting when it really wasn't? Oh! not to mention I have been getting the OUT OF MEMORY upside down in red with 1.1 as well!

Lightroom 5: All photos now "Error working with this photo"

I went back to my lightroom catelog, where a lot of my photos are all on my NAS, and now all the photos are unable to be edited. "There was an error working with this photo."
Everything was working for awhile, but now every single photo is erroring out.
In the finder, i still see the photos perfectly fine. I even opened up the good 'ol Photo Mechanic 5 and opened a contact sheet, and these photos still worked. So it's not like they're corrupted or completely gone.
I created another new lightroom catelog, and tried to import the photos again. But when I select the directory the photos are in, it's empty for about 10 minutes, then shows all the photos but with "Preview unavailable for this file."
The big caveat are all these photos are on a networked NAS (Synology). I'm accessing it over WiFi which is probably the biggest problem.
The folder was mounted as a NFS folder. It was disconnected once when I had a power outage (damn wind). I since re-mounted the folder and all that. I'm not entirely sure if that's what did it or if these errors started happening after that or not. But I've moved photos to my NAS folder in my catalog just today, and they are now erroring as well. So it's not like the older ones are erroring. Just all of them are.
Mac OSX - Mavericks 10.9
32GB Ram / 3.4GHz Intel Core i7
Lightroom 5
Files are all: DNG/ARW/NEF

I'm sorry I can't be more helpful, but there are lots of messages in the forums about Lightroom problems specifically related to Synology NAS.
Have you spoken to Synology about this?

Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram, Lately Photoshop CC 2014 in my PC gets blocked when doing

Últimamente Photoshop CC 2014 se detiene fusionando las capas al hacer panoramas. Primero edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

Últimamente Photoshop CC 2014 se detiene fusionando las capas al hacer panoramas. Primero edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

Export Error Lightroom 3

Help!
I keep getting error message as follows, when I attempt a bulk export in lightroom 3 from RAW to JPEG:
The first 2 times it worked perfectly and when I tried to export the third batch it said:
An internal error has occured ?:0: attempt to index field '_dataChanges' (a nil value)
Can't find a field titled dataChanges anywhere

Hi Rob,
I rebooted and haven't had a problem since!
No idea what happened or why. Should have followed the age old IT solve all
Cheers
Date: Mon, 19 Nov 2012 16:17:55 -0700
From: [email protected]
To: [email protected]
Subject: Export Error Lightroom 3
    Re: Export Error Lightroom 3
    created by Rob Cole in Photoshop Lightroom - View the full discussion
Hi Chantelle - you're welcome, although I haven't been much help at this point. Which export service, which settings... - if you give me / us more to work with it may be possible some idea is triggered. Is it repeatable? Does it depend on which files are bing exported? OS version, Lr version... Even if still no ideas, Adobe would need such info in the bug report. Rob
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4860029#4860029
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4860029#4860029
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4860029#4860029. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I use Adobe lightroom to export images to Facebook - I am now getting error message related to this process address not understood- how to correct?

I am using Win & Home edition / Mozilla Firefox on my HP laptop. On Oct 8 I used Lightroom to export images to Facebook. Now when I try to repeat this, authentication fails as The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (lightroom) isn't associated with any program or is not allowed in this context.
The export process was working, but isn't now. I have ben having problems with Firefox - I wasn't able to retain the settings for opening with my own Homepage (kept going back to Firefox default. So I have done a reset. Seems that this has somehow disrupted the authentication process. Can you help please.

I just dropped into the forums to see if other people were getting the DVD burning verification error (Error code 0x80020063). I've been holding off on the Tiger to Leopard upgrade until very recently. All of my must-have apps were anecdotally stable and I was under the impression that 10.5 was too. Apparently reliable DVD burning is Tiger only, at least on my systems.
We've been burning Taiyo Yuden DVD's almost daily with Tiger with incredibly low failure rates. After what seemed to be a smooth upgrade of a Mac Pro tower & 2 MacBook Pro laptops (one is a Core Duo and the other is a Core 2 Duo) I've spent the entire afternoon troubleshooting until I ended up here. Some searching on the board leads me to conclude that this will be a bigger headache than I imagined.
I've done all the obvious stuff (varied the burn speed, moved the files to a different drive, reset PRAM & SMC, used a different account, deleted finder.plist, tried repairing the system with DU on the Leopard install disc and then I tried burning on different computers with different media). What I'm finding is that over 50% of my DVD's are throwing the error code during verification across 3 different models all running Leopard 10.5.2. CD burning seems to work as before (but we don't use this as much so ?). I saw that some people had posted that closing the finder window helped, but that didn't improve my overall failure rate. The DVD's appear (indentical byte size and item numbers) to be burned correctly and usable, but I need to be sure so I can't trust them.
We need reliable DVD burning for our business and this is a real problem. I was going to trudge over to the Apple store, but it doesn't sound like there's a real fix yet.

Lightroom encountered an error when reading it's preview cache

I been getting this error for over 2-3 months and thought it would go away with the new version releases, i tried all the standard fixes,deleting the catalog,compacting etc. even moving it to new folder, reinstalled the software twice. The whole nine yards. IMHO, there's a problem with the software, it may be uique with differetent type of machine setup or a corrupt file in the in the catalog and the compacting doesn't fix it.
The error always happens while in the develope and crashed, has to leave the software (sometimes it just hangs the software and you have to kill the task manually). You have at least 10-15 seconds before going back in, otherwise it will still crash, a thread is still occuring from the orginal crash and still completing it's task. That's the error, annoying as heck.
My only hoping is a new version of LR comes out soon (4.0) and it goes away, otherwise, I'm going to find something else-- driving me crazy, I spend about 10-15% of my time each week getting out and back in to make go away, then can go for a day(s) sometimes and no problems. I tried recreating the problem on specific photos where I think it might be corrupt, that doesn't give any clue, there is no pattern to this at all, it happens randomly on new photos and old photos, yet i can go back to those photos again and no problems.
Any NEW ideas would be appreciated (no compact, no new catalogs, new installs, turn off various options cache preview etc. move to new folder and more.....done that etc.).

The error is exactly what's it in the title of the post, Lightroom encountered an error when reading from its preview cache and needs to quit. That's it.
I don't know what else to tell you, i wish I had more. This is all over the internet, I followed pretty much all the solutions, delete the catalog or delete the preview folders (tried both). Tinker with the cachee preferences.   Most people kill the preview folders and the catlog gets recreated and there problem is resovled, doesn't work for me.
No cloning, totally two different catalogs (not networked etc.) a good question though.
When I am refering to catalog and cache, I strictly talking about LR only, nothing outside of that or in the operating system, just LR files only, here they are:
I have a   LR catalog folder called--->   C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
you have another folder called: LR_Catalog Previews.lrdata   (with many subfolders underneath at)
and I have LR catalog filein C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
LR_Catalog.LRCAT
That's it, a file and a folder with many sub-folders. I'll get a screen print with error next, but it's basically what I said earlier in the beginning, you can be in develope or even the library, and error occurs in a message box, you hit ok and the application exits. On average it can happen 6-7 times with an hour and sometimes not at all, working with same the photos. Sometimes it can happen within mintues, sometimes not at all for over 2 hours. There is no specific pattern to it.

"Lightroom encountered and error when reading from its preview cache and needs to quit"

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
Your thoughts?
--Kenny Brandon Wilson

Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
Gokul: Click on start and type %appdata%, then open roaming folder.
Edward: ok
Gokul: Open Adobe folder.
Gokul: Open Lightroom folder.
Gokul: Open Lightroom folder> Preferences.
Edward: ok
Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
Edward: OK
Gokul: Please check if you can launch Lightroom without any error.
Edward: it shows me a welcome screen and is asking me to select my country
Edward: aka, register the software
Gokul: You can skip and launch it.
Edward: LR catalog not found
Gokul: Please select the catalog.
Edward: my original catalog?
Gokul: Yes.
Edward: testing integrity of catalog
Edward: loaded just fine
Gokul: Okay.
Gokul: Please check if you can re-launch it again.
Edward: yes, it worked!
Gokul: Excellent!
Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
Edward: aha....ok
All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

Lightroom encountered an error when reading from its preview cache and needs to quit. Says Lightromm will attempt to fix the problem the next time it launches, but on every re-launch I get the same message. Any clue as to how to fix this problem?

I recently updated my HP laptop's OS from WIndows8 to WIndows8.1. When I went attempted to open Lightroom5 I got the following message:
"Lightroom encountered an error when reading from its preview cache and needs to quit. "
"Lightroom will attempt to fix the problem the next time it launches"
Every time I relaunch I get the same message. I'd like to understand what might be causing the problem so I can remedy and get back to my photo editing. Any clue as to how to fix this problem would be greatly appreciated.
JPM

reset your preferences, Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums

I run windows 7/8 and lightroom 5.7 i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly. What do I need to do to fix it.

I run windows 7/8 and lightroom 5.7 I am getting an error message and here it is " lightroom encountered an error when reading from its preview cache and needs t quit" How do I fix this.

THANKS
Hank Wilkinson
Please visit my web site <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
For information on any of these photos please email me or call 612-756-9970

How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
This is the biggest question, where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

Lightroom encountered an error and needs to quit.

Lightroom encountered an error and needs to quit.
There was a problem reading one of the Lightroom catalogs.
The last time Lightroom ran, it shut down prematurely due to a problem reading the catalog. Lightroom must now check the catalog before proceeding.
This is what is showing up on my screen whenever i try to use my lightroom it started out of the blue and i need to access my photos for work etc...
Does anyone know how to fix this problem????

Try holding down the option/alt key when starting Lr, can you create a new catalog??
Provide more details such as your OS, etc...

IPhoto can't export error cant be found

Hi guys, i am disperate. I have buy iPhoto and i import all photos of a wedding on event, i create a slideshow and now is impossible for me to export
error message:
The operation can’t be completed because the item can’t be found.
someone help pleaseeee!!!!!

I have this problem:
I import to iphoto some pictures (check box "import to iphoto library" done)
I make a new slideshow
I export the slideshow
After 10 seconds is give me this error:
The operation can’t be completed because the item can’t be found.
I am stuck there, impossible for me to export a slideshow...

Lightroom 2 colour difference in lightroom vs. export and print

Hi,
I am currently using Lightroom 2 and Windows Vista, monitor profile is Dell's E248WFP Color profile.
The problem I have is that everything looks fine in lightroom, I was able to see the black backdrop with some defining detail on it. However, when I export the photo (export colour space: sRGB) and view it, the photo darkens, I could no longer see any detail in the black backdrop (I've tried othercolour space like the adobeRGB but results is the same). I understand that there could be difference using Windows viewer as someone has pointed out to me. I tried importing what I've just exported from lightroom back into lightroom and I could see all the original details.
So I am guessing it's just an issue with windows viewer not able to display all the colours intended. I than send the file to "Blacks photography" (photo developing store) for printing and the same issue exists, it's darker than what is displaying in lightroom. Could someone please point me to the right direction?
Thanks in advance for your help!
Gi

Hi,
Thanks for the advice, I bought a Spyder pro 3 thinking that might solve the problem but I think the problem is what is being exported? (not sure)
Photo looks good in LR but after exporting, open the file and looks different in windows photo gallery than what's in LR.
So I tried looking at the exported jpg in LR and it looks good in LR. I assume that's normal as people has mentioned that LR will display more colour and do it correctly. The problem for me than is printing. I send the photos to local photo processing stores and the colour is still off. Sorry for the ramble but here are some of my questions:
I assume it's completely ok that photos look different in LR and windows photo gallery (or even other viewer). As look as it looks ok in LR than it's fine?
Is the problem with a low quality monitor (Dell's E248WFP)?
I might not be calibrating it correctly? (will try again)
Thanks again!!
Gi

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
I've seen this issue since beta1. The issue seems to be related to a camera setting that stores the files in folders by date. The Folder structure becomes drive>DCMI>10202008>image.ARW
This "no photos found error" I have seen in beta1 LR1 LR1.1 LR1.2 LR1.3 LR1.4 and LR2.0 this is still an issue in LR2.1
Auto import works fine with canon or nikon RAW files (I've used several different cameras with no problems)
The Folder structure for canon files is drive>DCMI>100>image.CR2
Auto import Does not work with Sony A100 .ARW files with folders by date turned on I have heard from people with other Sony cameras like the A700 also have this issue.
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
Primary hard drive: 500GB
Hard drive 2: 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3: 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
Lightroom 2.1
photoshop CS3

I believe this is fixed in version 2.5 and 3.0
ARW (Sony Raw) files seem to work with auto import

Lightroom photo export error

Similar Messages

Maybe you are looking for