Lightroom printing issue with print server

I have a DP-G310 print server set up. It works fine with every programme but Adobe Lightroom. When I click print after a while I get the message failed to print. All my other programmes print ok, IE Word, Wordpad, Indesign CS3, Photoshop CS3, Illustrator CS3. The printer I am using is a Canon i9900. I also use a HP cp1700 set up on the same system the same way and has the same problem with Lightroom. If I turn the computer off after the page failed to print (not restart) and then turn the computer back on, it prints. Lightroom prints ok when I connect with a normal USB cable. I am using windows XP, 2gb ram Lightroom 1.4 .1 The same thing happens with Lightroom 2 Beta. Any ideas would be welcome.
Just in case anyone has a similar problem, this isue has nothing to do with Lightroom. By trial and error I discovered the problem was caused by my internet connection and was initiated by Lightroom connecting to the internet checking for updates. If anyone has any ideas how I can sort out this conflict so I can use Lightroom and print wirelessly at the same time as being on the Interenet I would be grateful.
Thanks
Alan

Did you run the OC4J in your web server box?
Jay1238

Similar Messages

Lightroom 5.7 with printer canon ipf 6450

Hi, i've a problem with lightroom 5.7; i'm unable to print with the print module on my canon ipf 6450 (can't manage the colors by lightroom. i'm using Mac Os X 10.9.5. No issues at all with CS6 to print!

Hi Jim
Here a screen shot:
Mit freundlichen Grüssen
Pascal Gai
Chasseralstrasse 15
3212 Kleingurmels
www.pascalgai.com
Am 30.12.2014 um 15:03 schrieb JimHess <[email protected]>:
Lightroom 5.7 with printer canon ipf 6450
created by JimHess in Photoshop Lightroom - View the full discussion
What is preventing you from managing the colors using Lightroom?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7052908#7052908 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7052908#7052908
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Issue with printing to a network photocopier

We are a small school where the teachers all have Macbook Pro laptops. For a while we have been having intermittent issues with printing to the Photocopier, today is an example.
Teacher tried to print, worked fine, then tried again 15 min later, received message Printer is in use (I was standing next to it and it wasn't in use!) tried again 10 min later, printed fine.
Teacher tried to print, spooled for about 5 min then printed, tried again, printed fine.
From the CUPS error log there are the following:
- The Printer is in use
- ICC Profile "/Library/Printers/Sharp/Profiles/SS0HIN0.icc" does not exist.
- Remote host did not accept data file(32)
- The printer did not respond
- Stopping unresponsive job
- The printer is not responding
They are all on wireless. There is no network issue as I can ping the photocopier, get onto the Internet etc.
They don't print via a server, they all have the photocopier installed on their macbooks as an IP printer using LDP.
Thanks

You'll need to manually create the folder and install the profiles. From the finder select Go, Go to Folder. Enter "/Library/Printers/Sharp/Profiles" without the quotation marks, Go. You might have to manually create the Profile folder. You can download this disk image from Sharp that contains the icc files here; http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX4110N.aspx?vi ew=drivers
Drag and drop the icc files from /MX-C26/Profiles to /Library/Printers/Sharp/Profiles
Also make sure you install the drivers from MX-C26 for the appropriate version of OS X you are running.
Hope this is clear.

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

Issues with printing purchase order

Dear friends,
I'm having some issues with printing purchase orders.
Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
kind regards,
Camilla

hello all,
thanks so far for your reply.
i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
The output conditions fpr purchase order have also LOCL (local printer)
The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
Is the automatic printing something that is maintained in SPAD?
kind regards and thanks for your help sofar

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Issue with print image in air

hey frnd,
plz check this link
http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
hey frnds,
while using this multiple print datagrid code, getting 1 issue with
print image in printheader mxml file.
I'm adding 1 image tag and runtime getting image path in variable and
want to print tht image in header ,
but it is not get printed but if i'm giving @Embed image as a source
then it is print.
Is any way there to print runtime image after adding in printheader
file ?
thx in advanced,
[email protected]

is any solution there ?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Issue with printing of Currency Value.

Hi,
I have an issue with printing of Currency Value.
( Pleae let me know if any thread available already I searched it before posting but not found).
The Problem is as follows:
I have a field s_value TYPE MARM-SALK3. (which is of currency type).
The value of field is actually 1664.1450. Currency USD
But when I print this variable in ALV report it prints as 166414.50 though I used the same data type. (SALK3).
Pleaes help me to fix this.
Regards,
Venkat

Hi,
If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
wa_fieldcat-fieldname = 'SALK3'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-cfieldname = 'WAERS'.
wa_fieldcat-ctabname = 'ITAB'.
append wa_fieldcat to gt_fieldcat.
Please check,
Regards,

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Lightroom printing issue with print server

Similar Messages

Maybe you are looking for