Lightroom problems AGAIN and again

I have the same problem since over a month. I've download Lightroom through creative cloud, I'm paying for it every month and yet I cannot use it comfortably. Every time when I'm closing my computer down and then I'm restarting it my LR is not working. It shows me that "0 days remian" in "I want to try" option and it asks me to put my serial number. When I'm putting my serial number (the one that is in my profile) it shows me error and nothing is happening. So I have to delete LR and install it again EVERY TIME WHEN I WANT TO USE IT, which is ridiculous! Is there any other way? When I was asking about it last time someone advice me to "Please refer the article: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 and try installing Lightroom from Creative Cloud Desktop." which I did. It didn't help. Any other ideas?

Similar Messages

Hi, my trial version of Lightroom 5 has recently expired and I have now fully bought it. I have uploaded the CD onto my Mac, but when I open the Lightroom application again, it still says the trial has expired. Does anybody know how I can update it so I c

Hi, my trial version of Lightroom 5 has recently expired and I have now fully bought it. I have uploaded the CD onto my Mac, but when I open the Lightroom application again, it still says the trial has expired. Does anybody know how I can update it so I can finally use it again? I really appreciate any help!! Thank you!

Joanne please remove your current installation of Photoshop Lightroom using the uninstallers located in the Applications/Utilities/Adobe Installers.
You will then want to download Adobe Photoshop Lightroom 5.7.1 from Adobe - Lightroom : For Macintosh. The update contains the entire application. Photoshop Lightroom can not be installed through the Adobe Creative Cloud Desktop application and still be licensed with a serial number.

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

When i open iPhoto and want to share my photo on face book its popup with problem occur and ask me to repair when i repair it appears back again?

when i open iPhoto and want to share my photo on face book its popup with problem occur and ask me to repair when i repair it appears back again?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

My Iphone Has a Restart Problem Again and Again wot To do?

MY Iphone Has a restart problem again and again wot to do please tell me

Basics from the user guide are restart, reset, restore from backup, restore as new. If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.

Same wifi problem over and over again. Why does this happen?

Ok, so i have had this problem for a while. My WIFI network works really good, and its only on my IPAD 3 that have problems. My signal is great, and this has happened before. Suddenly i have no connection. But the signal is good and i dont get why there is a problem, when there is no problem with other ipad and iphones in the house. And i have done all there is to do.
"safari could not open the page because the server has stopped responding"
This pops up when i try the facebook app.
"can not connect to facebook , check internet connection and try again ."
iPad (3rd gen) Wi-Fi, iOS 6.1.3
Now
People in here has helped me by saying this:
Just unplug the cables from router(power and internet) and put back just after 15 sec no matter if show the colour on router lights mean its on,its happen to me when has colour/lights is on but no signal is detected so i just unplug and put back and work back to normal,dont concentrate the colour/light always,just see ur icon signal(wifi) on menu is on.
Em... So well, now, this problem happen really often, and it buggs me!
Why does this problem pop up minimun once in 2 weeks?
And its still just me that has this problem.
Its only my ipad 3 that have this problem, iphone4s and ipad2 is connected
I WOULD BE SOOO HAPPY TO KNOW WHY THIS HAPPENES! Im sick of it.
Thanks:)

Try force closing the Music app: double-tap the home button, locate Music in the list at the bottom, tap and hold it until it wiggles, tap to close it, tap the home button. See if that fixes things. If not, try turning off iTunes Match on your phone and then back on, allowing your music list to reload.

Problem again with flickering and no firmware update

I've got the problem again....
I think I'll leave Imac world ....

I had the flickering problem with my new iMac, it was resolved with the new software update to 10.4.6.

Exposure problem with Lightroom 4 CS5 and Raw 6.7

Hi all
I have recently upgraded from Lightroom 3.6 to the new Lightroom 4 and am genrally pretty happy with it, I tend to use it along with photoshop CS5 extended and also imagenomic Portraiture, but I have found an annoying little problem in doing this and something that I never suffered with when using Lightroom 3.6 and it is this...
when I take an image from Lightroom 4 and click Edit image in Photoshop CS5 and then use Imageonmic to soften skin etc all seems to work well I then carry out any touching up within Photoshop and once finished save it back to lightroom for any final tweaks etc which is fine and all works smoothly, except once I have saved it back to Lightroom the exposure has been pushed up about 3-4 stops at least , meaning I then have to pull it down again and this can sometimes result in extra editing I could do with out. now I know its not the end of the world and is probably just a bug that I'm hoping will be sorted within Lightroom 4 but I just wondered if anyone else has had a similar problem, is it a bug or am I doing something wrong? (although I'm doing the same with Lighroom 4 as i used to do with LIghtroom 3.6 and that worked fine)
Oh one more thing I should mention to get lightroom 4 and CS5 to work properly together I had to go into the Adobe Labs site and download the Camera RAW 6.7 software for CS5 so it could also be a bug here i guess.

There have been several posts over on the Lightroom forum, and other non-Adobe forums also, about this issue: it seems that there's a bug in ACR 6.7RC which causes the image to be over-expose, compared with the setting applied using PV2012 in LR. I guess this is the kind of thing a Release Candidate is supposed to flag up! I was all set to upgrade my own ACR to ensure that PS would recognise my LR4 edits (I normally avoid RC versions and wait for the final), but all the reports of this problem have stopped me from doing so.
In the meantime, best option so far as I'm aware is to process the image in LR (you get the option when you choose to edit in PS), meaning that it does all the rendering before passing it over to PS (otherwise, ACR handles the conversion of the raw file into TIFF). This does however mean that smart-objects and so on are temporarily out of the equation.
I'm sure this will all be resolved pretty soon.
Edit: in fact, one of the posts I mentioned is about ten posts down in this very forum: http://forums.adobe.com/thread/974963?tstart=0
M

The same problem again with HP Simple Pass fingerprint reader after upfrading from Firefox 4 to Firefox 5. I have already installed HPSimPlePass 7.0.74.0 to fix the problem after upgrading to Firefox 4.

I have a HP Pavilion dv6 with a fingerprint reader. I had the same problem as many other people when upgrading to Firefox 4, : I couldn't use the HP Simple Pass to enter a website needing a username and password by just swiping my fingerprint. I fixed the problem by downloading the new HPSimPlePass 7.0.74.0. This fixed the problem and I was very happy. Since upgrading to Firefox 5 I have the same problem again, but I already have the new version of HP Simple Pass. How can this be fixed so that I can use this fingerprint scan feature again, or where can I download Firefox 4 again?

''FredMcD [[#answer-709783|said]]''
<blockquote>
The programers know of this and are working on it.
</blockquote>

Audio Render Problems Again

I'm having problem again rendering a one hour presentation. If I use Command/R, the dialog box indicates seven or more days. If I highlight the selection I get essentially the same estimated time.
Command/R usually works, but not this time. Audio For Playback is checked.
The DV timeline plays in Quick Time OK.
I desperately need to get this video sent out! I even deleted preferences using the "Preference Manager" program.
David

All of my lecture video series are recorded in LP 16 bit audio. Each lecture is between 1 to 1.5 hr in length. I have successfully completed 10 of the 23.
Each lecture is sent to iMovie HD and then the timeline.mov is placed into FCE. One other time the timeline audio would not render, so I converted it to DV via MPEG Stream Clip and placed it back into FCE. The lecture I'm having trouble with is #11.
As mentioned, usually Command-R will do the trick in 10 minutes or so, not 6 to 10 days.
David

Explorer problem again????

I got explorer.exe problem again,which was solved previously by creating new user account.I am free from problem for around 1 month and started again, and this time very frequently i am getting windows with message that
"Windows Explorer has stopped working".I am using windows 7 professional service pack 1.Please any body give permanent solution to this problem,Problem details are below
Problem signature:
Problem Event Name:    AutoVerifierV2
Application Name:    explorer.exe
Application Version:    6.1.7600.16450
Application Timestamp:    4aeba271
Fault Module Name:    verifier.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bdb2a
Exception Code:    80000003
Exception Offset:    0000c0de
Status Code:    201
OriginalBucketID:    0
OS Version:    6.1.7600.2.0.0.256.48
Locale ID:    1033
Additional Information 1:    e903
Additional Information 2:    e90395e1c160c582c0a3c5e6d36ee788
Additional Information 3:    f03b
Additional Information 4:    f03b4ab77c5a1d7b156e29c2436e59a6

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Why am I having update problems again?

When I started Muse today I received a message that there was a new update and did I want to install. I said yes and it proceeded, when complete I received this pop up message:
Title, Adobe AIR - "Intial content could not be loaded for this application. Try re-installing or contacting the publisher for assistance".
But you can't re-install because it shows it's already installed. This happen to me a month ago and I had to un-install Muse & reboot before I could re-install.
Why is this happening? Is there a way I could open up Muse without going through a un-install again. This only happens with Muse updates which occur when starting Muse, other Adobe updates that take place through the Creative Cloud control panel are fine.
I just tried again, same problem

Help Again.
My computer just doesn't like Muse & apparently CC programs. After all this time when starting Muse I have been ignoring the message to update because I'm afraid if I say yes I will have the above problem again. Today I got brave and said yes and Muse would not open again!
So I returned to this site and used the link you gave me before to reinstall Muse, when it finished it told me that there was a newer version 7.4 available and would I like to install it and I said yes, and it seemed to work and opens fine.
I also had a request to install the latest update of Creative Cloud so I said yes. Everything went fine. I got really brave and I noticed that there was a newer version of Muse CC 2014 and I installed it but now that CC and other CC programs tell me I need a sign in with my adobe ID to try a 30 trial, if I press the License This Software button it asks me for a Serial Number. Why can't I open CC programs without a serial number, I am a Creative Cloud member? I have 2 Icons on my desktop, Adobe Muse.exe which works and Adobe Muse CC that tells me I need a serial number.

Performance Problem Again

Hi all,
We are encountering performance problem again
The batch process deletes 1M rows every night which took 30mins the usual.
But last night (12AM) it took more that 2hrs and hangs.
Does it help if I run gather_schena stats regularly when there is constant DELETE on the table?
Please help me check our ASH, AWR, ADDM to resolve the issue.
ADDM
https://app.box.com/s/7o734e70aa2m2zg087hf
ASH
https://app.box.com/s/xadlxfk0r5y7jvtxfsz7
AWR
https://app.box.com/s/x8ordka2gcc6ibxatvld
Thanks....
zxy

Hi ARM,
***What is the SGA_TARGET or MEMORY_TARGET that the database is running on?
Our server has 8Gb Physical Memory and 8Gb Swap.
What is the ideal SGA_TARGET and MEMORY_TARGET shouldbe?
Our current setting is:
========
SQL> show parameter memory
NAME                                 TYPE        VALUE
hi_shared_memory_address             integer     0
memory_max_target                        big integer 5936M
memory_target                                big integer 5936M
shared_memory_address                 integer     0
SQL> show parameter sga_
NAME                                 TYPE        VALUE
sga_max_size                         big integer 5936M
sga_target                               big integer 0
Thanks

Post Moved BT Problems Again

Post moved to infinity board http://community.bt.com/t5/BT-Infinity/BT-Problems-Again/td-p/544347
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I was going to put it in the Infinity forum but as there were other similarish ones here, and that my problem is reagrding a connection issue (my modem gets Inifinity just fine), I thought thought the connection issues forum would be the correct place.
Also as HH3 is not Infinity specific, I thought the problem was not necessarily Inifinity specific either
Even so, thanks for putting in the correct place.

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

Lightroom problems AGAIN and again

Similar Messages

Maybe you are looking for