Lightroom slows all down

Hi everybody. My new Lightroom 3.0 slows down everything on my computer. After using it for a while it halts my computer. Usually i have to restart it by pressing the power button for 5 secs.
my system specs are:
Versión de Lightroom: 3.0 [677000]
Versión: 10.5 [8]
Arquitectura de la aplicación: x64
Cantidad de procesadores físicos: 2
Velocidad del procesador: 2,0 GHz
Memoria incorporada: 2048,0 MB
Pantallas: 1) 1280x800
I´ve tried optimizing the catalog. Erasing the previews and making them again, etc.
Nothing works.
I´m thinking on move back to lightroom 2.7 or, even better, using some other software.
please help cause i like lightroom and wouldn´t wanna change.

Thomas Achermann wrote:
My personal opinion is that the days of 32bit OSs are definately over - there are simply to many limiting factors for a modern, high-end application like LR. The HW has been around for severals years and it is nowadays relatively inexpensive.
But as with all thing in the computing world: you're mileage may vary
Grüsse in die Heimat aus dem Norden Lapplands...
I agree on that, but I just don't have the time to upgrade my two machines to a new O/S and install and configure EVERY f.... application again right now
If I had the time and nerves right now, there would be a top-level machine on my desk tomorrow!
Grüsse aus dem (schon wieder regnerischen) Zürich
Beat Gossweiler
Switzerland

Similar Messages

  • Lightroom 3 Slowing Waaay Down?

    Howdy!
    I am an Apple Aperture user and thinking about switching to Lightroom.  I downloaded the trail version and have 15 days left before I have to decide weather to buy it or not.  So far all was going really great and I was convinced I needed it, until this evening when I started editing more images from a recent photoshoot.  For some reason Lightroom has slowed waaaay down.  I haven't installed anything new on my Mac, everything was working great previously so I am not sure what to even try and troubleshoot.  My images are from a Canon 40D (or XTi) each about 10gig and all are RAW.
    So far I have only imported 2116 images and if I convert my currrent Aperture library, it as 40k images I would want to move over.  Of the images I have imported I have only 235 in this current folder, about 60 of those I have edited on.  Some I have done some pretty extensive editing clearing up skin using a combination of the skin smoother and heal tools.  A few have some artistic work on them and only a couple have I sent to an external editor to do manipulation.  I have added one plugin to Lightroom LRB timelapse, and would like to add more for my Photoshelter account and more editing options.
    My MacBook is running Lion, 10.7.1, has dual core 2.4 processors, 4 gigs of Ram and a 500 terribyte 7200rpm drive.  I use an external 22 inch Acer monitor.
    What should I try to recover the performance of Lightroom 3?

    David
    Can you just confirm something? You say each image is 10Gig do you mean 10Mb? You asls say you have a 500 Terrabite Hard Drive? Surely you mean 500Gb??
    Check disk free disk space, you may find things are slowing because you are running out of virtual RAM (which is basically hard disk space)
    I would not consider copying over all your photos again into LR. I too have Aperture and moved over to LR about 18 months ago. As a Manchester Photographer I simply find the support in the photography industry superior and most professional photographers have opted for Lightroom, although I do use Aperture on occasion for certain projects.
    Lightrooms catalogues you images and leaves the originals in their orignal location
    Regards
    Darren

  • All kinds of problems with scripts running and slowing things down. It always has to do with "chrome". I sick of it and am going back to IE if I can't get this resolved this weekend.

    What do you want to know.....it's been going on for months and I can't seem to get it resolved. It's definitely a conflict with FF and why you can't resolve it, I have no idea. I've searched the net and these error messages are everywhere. Don't you think it's time you address this.
    At this point I really don't care if I use FF any more. It's slowing everything down on my machine and if you don't have the experience to correct it, then back to IE I'll go.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Why can't I make Lightroom use all the CPU-Power (all cores) available for generating Previews?

    Dear Lightroom Team,
    I've been a Lightroom user since the very first Beta, and I am truly happy with the work you deliver. It changed my way of editing forever, and you guys keep improving it.
    Yet there is that one question that bothers me, and that i'm looking for an answer for.
    My Workflow has the generate Previews checkbox checked by standard. I usually import between 150 and 2000 photos at once, on occaions it can be up to 5000 photos. Generating Previews always takes a significant amount of time, and Lightroom is only using 25% of my CPU Power while doing so. (using a MacBook Pro 8,2)
    I understand the concept, that only using 25% CPU enables me to use the computer while waiting for the Previews. But most of the time I just grab myself a cup of coffee, do the dishes or other stuff, while waiting for the Previews. Usually I rund out of things to do, because it takes ages to Process all the photos. So I would really love to make Lightroom use ALL the cpu power possible.
    I'm sure you guys have spent a lot of thoughts while coding this and have a very good answer handy. Looking forward reading it!
    all the best,
    Wolfgang

    Wolfgang Lienbacher wrote:
    I was actually hoping to get an official reply from adobe ...
    This is prmarily a user-to-user forum. The Adobe staff monitored site is here:
    http://feedback.photoshop.com/photoshop_family
    On my four-year old Windows 7 i7-860 system LR4.4.1 takes ~0.5 sec. per Canon 5D MKII 21Mp raw image to render 'Standard-Sized' previews with LR Catalog Settings 'Standard Preview Size' set to '2048' pixels. I consider that pretty fast!
    I usually build 1:1 full-size previews on import, which takes ~5.0 sec. per image. Processor utilization varies between 15-50% for Standard-Sized previews and 15-65% for 1:1 previews. I consider this pretty slow, but it doesn't stop me from working on the images inside LR's Library and Develop modules.
    I wait until 'Copy and import photos' has completed and can see Preview Building has started. LR doesn't slow-down much even with the 1:1 preview building going on in the background. Have you tried working in LR during the preview building (i.e. sorting,  rating, keywording, and Develop adjustments)?

  • Lightroom slower when GPU acceleration is enabled

    My graphics card is OpenGL compatible and it is shown in the preferences under performance.
    When the GPU setting is turned on my develop module is extremely slow. Turning it off is faster and more like LR 5 performance.
    All the hype about GPU acceleration and in reality is slows me down.
    I've also noticed then if you have an image open and then open the preferences windows and toggle the GPU setting on and off, the image changes.
    When I say changes, I mean the image becomes lighter or darker as if the exposure or whites/blacks is being changed.

    I agree with Adamnz. I have a slightly older system but using CC 6 is like going back to the early releases of 5.x when the clone tool was jerking around the screen.
    Painting with a brush and the mask showing makes the lag time visible.
    Jerky tool movements... like trying to paint with Parkinson's.
    Screen blackouts while refreshing images.
    Slow screen refreshes between images.
    CPU usage slightly higher (60%) with GPU enabled
    But since this version created a "New and Improved" catalog I can't (i don't think) go back to 5.x...
    BTW, I have been waiting for a call back from support for an hour when the stated call back time was 25 to 30 minutes... Not Good.
    Here are my specs in case Adobe is listening....
    Lightroom version: CC 2015.0.1 [ 1018573 ]
    License: Creative Cloud
    Operating system: Windows 8.1 Business Edition
    Version: 6.3 [9600]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 3.3 GHz
    Built-in memory: 16366.4 MB
    Real memory available to Lightroom: 16366.4 MB
    Real memory used by Lightroom: 3261.9 MB (19.9%)
    Virtual memory used by Lightroom: 3324.1 MB
    Memory cache size: 1469.4 MB
    Maximum thread count used by Camera Raw: 4
    Camera Raw SIMD optimization: SSE2,AVX
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 2560x1440, 2) 2560x1440
    Input types: Multitouch: No, Integrated touch: No, Integrated pen: Yes, External touch: No, External pen: Yes, Keyboard: No
    Graphics Processor Info:
    GeForce GTX 560 Ti/PCIe/SSE2
    Check OpenGL support: Passed
    Vendor: NVIDIA Corporation
    Version: 3.3.0 NVIDIA 350.12
    Renderer: GeForce GTX 560 Ti/PCIe/SSE2
    LanguageVersion: 3.30 NVIDIA via Cg compiler
    Application folder: C:\Program Files\Adobe\Adobe Lightroom
    Library Path: D:\Pictures\Lightroom\Lightroom Catalog.lrcat
    Settings Folder: C:\Users\Dim\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Behance
    2) Canon Tether Plugin
    3) DxO Optics Pro 9
    4) DxO Optics Pro 9 Importer
    5) Facebook
    6) Flickr
    7) Leica Tether Plugin
    8) Nikon Tether Plugin
    Config.lua flags: None
    Updated Toolkit: Adobe Camera Raw 9.0 for Lightroom 6.0 (build 1014445)
    Updated Toolkit: Book Module 6.0 (build 1014445)
    Updated Toolkit: Develop Module 6.0 (build 1014445)
    Updated Toolkit: Import Module 6.0 (build 1014445)
    Updated Toolkit: Library Module 6.0 (build 1014445)
    Updated Toolkit: Map Module 6.0 (build 1014445)
    Updated Toolkit: Monitor Module 6.0 (build 1014445)
    Updated Toolkit: Print Module 6.0 (build 1014445)
    Updated Toolkit: Slideshow Module 6.0 (build 1014445)
    Updated Toolkit: Web Module 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.AgNetClient 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.AgWFBridge 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.Headlights 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.LibraryToolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.MultiMonitorToolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.archiving_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.bridgetalk 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.catalogconverters 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.cef_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.coretech_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.curculio 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.discburning 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.email 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.export 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.ftpclient 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.help 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.iac 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.imageanalysis 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.layout_module_shared 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.pdf_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.sdk 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.sec 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.socket 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.store_provider 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.substrate 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.ui 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.video_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.xml 6.0 (build 1014445)
    Updated Toolkit: com.adobe.wichitafoundation 6.0 (build 1014445)
    Adapter #1: Vendor : 10de
      D

  • Macbook Pro Extremely Slow All Of A Sudden, Wiped Completely and Problem Persists

    My 2012 Macbook Pro has slowed down to nearly a crawl in just about everything I try to do, espescially with anything that utilizes the internet.  Activity Moniter initially revealed the issue to be the Kernal_Task proccess using too much memory as well as com.apple.finder. Also, Spotlight was indexing constantly until I disabled my disk from being accesed by it within the privacy tab of Spotlight Preference. The spinning beach ball of death has appeared more times in the past few days then I have ever seen in the entire year I've had my Macbook Pro.
    I literally tried everything that I could find. I've done everything from resetting the Pram and the other thing (I forgot the name but when you hold down four keys at once during start up). I've tried killing proccesses, rebooting my mac several times, closing out programs, deleting all applications, just about eveything you can think of. Safari, Google Chrome, and Firefox were all extremely slow. Attemping to verify disk permissions or repair failed because of the sheer amount of time it was taking. I let the computer sit for an entire day and it seemed to make little to no progress in repairing the disk. I even booted the computer in Safe Mode and it was stil performing poorly.
    The issue is NOT Hard Drive space on my Macbook. I know this because it was working perfectly fine and then all of sudden started behaving like this. All of these issues ultimately led to me doing something many others wouldn't, WIPING MY ENTIRE MAC AND RESTORING FROM FACTORY SETTINGS.
    The issue STILL persists although not as severe. Internet browing is bearable but nowhere near perfomring as it should. Even simple task such as opening up a new tab or switching tabs results in a spinning beach ball for about 5-10 seconds. Opening an application such as Pages or Twitter results in a spinning beach ball for 5-10 seconds before working slowly. Simply right clicking results in spinning beach ball.
    I have no idea what the issue could be at this point. I am now about to attempt to verify the disk again to see if it fixes any issues but a year old Apple product should NOT be behaving like this.
    Any advice is appreciated!
    My Specs:
      Model Name:          MacBook Pro
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Memory:          4 GB

    Melophage,
    I've been scouring the community for help, and hoping you might be able and willing to look at my etrecheck results and share any wisdom and feedback, problem causers you see! I updated to OS Mavericks through apple updates without really realizing I was installinga  whole new system. I have been experiencing the lag issues that many others have, and have a Kernel_Task for which the CPU skyrockets at random and consistently slows things down. I've run disk repair in recovery mode, repaired permission, PRAM, a few 'basics', but have not really had success in addressing the issue (I guess because I don't really understand the issue!)
    Thanks in advance for any time and suggestions!!
    Hardware Information:
              MacBook Pro (13-inch, Mid 2010)
              MacBook Pro - model: MacBookPro7,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 16:40:46
    Disk Information:
              Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 319.21 GB (200.7 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Startup Items:
              HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist 3rd-Party support link
              [loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
              [loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [loaded] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
              [loaded] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              WDQuickView
              HPEventHandler
              HP Scheduler
    Internet Plug-ins:
              MacCouponPrinter3: Version: (null)
              Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.1.2.72 3rd-Party support link
              RealPlayer Plugin: Version: (null) 3rd-Party support link
              Silverlight: Version: 4.0.60129.0 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              DivXBrowserPlugin: Version: 1.1 3rd-Party support link
              Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 9.5.5 3rd-Party support link
              ContentUploaderPlugin: Version: 1.0 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              Move_Media_Player: Version: npmnqmp 07076003 3rd-Party support link
              fbplugin_1_0_3: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              DivX  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Growl  3rd-Party support link
              Java  3rd-Party support link
              Perian  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              /Applications/iWork '09
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 297.29 GB Disk used: 110.38 GB
              Destinations:
                        My Passport [Local] (Last used)
                        Total size: 464.98 GB
                        Total number of backups: 39
                        Oldest backup: 2010-02-01 20:31:56 +0000
                        Last backup: 2014-01-02 04:25:58 +0000
                        Size of backup disk: Adequate
                                  Backup size 464.98 GB > (Disk used 110.38 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   4%          WindowServer
                   3%          EtreCheck
                   1%          Activity Monitor
                   0%          sysmond
                   0%          configd
    Top Processes by Memory:
              152 MB          com.apple.IconServicesAgent
              131 MB          softwareupdated
              115 MB          Finder
              111 MB          Google Chrome
              61 MB          mds_stores
    Virtual Memory Information:
              42 MB          Free RAM
              1.65 GB          Active RAM
              1.63 GB          Inactive RAM
              440 MB          Wired RAM
              822 MB          Page-ins
              0 B          Page-outs

  • My mac is running vert slow all of a sudden

    I reinstalled 10.7.4 last month with a clean install today my mac mini is very slow all of a sudden. I have made no changes and have not installed any software since the clean install. When I click on anything the mouse cursor becomes the rainbow circle for 1.m16 seconds (sorry tried to give you guys exact info but i only measured it once:)
    What i tried up to now:
    I tried to boot the mac with cmd r and reinstall. However the moment it connects to the internet the mothing happens i let it run for 2.5 hours and the blue bar did not even give me 1% (my internet on my mac air has no problems.
    I checked disk utility and checked disk permissions and repair disk. both no problems
    I ran activity monitor and here is the info.
    Activity monitor"
    memory free 50gig of 150
    RAM free 1 out of 3 gig
    CPU
    user 1.5%
    system 1.50%
    Idle 97.00
    system memory
    free 1.02 gb
    wired 593.6 mb
    active 661.9
    inactive 766
    disk activity
    2.73 gb data read
    1.11 GB written

    Thanks for your reply! This is it i hope.
    17/08/2012 22:58:18.206 UserEventAgent: get_backup_share_points no AFP
    17/08/2012 22:58:20.203 mds: (Normal) FMW: FMW 0 0
    17/08/2012 22:58:20.652 airportd: _processDLILEvent: en1 attached (down)
    17/08/2012 22:58:20.000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    17/08/2012 22:58:20.701 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    17/08/2012 22:58:20.702 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    17/08/2012 22:58:20.717 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    17/08/2012 22:58:22.000 kernel: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    17/08/2012 22:58:22.729 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    17/08/2012 22:58:22.729 configd: DHCP en1: INIT-REBOOT transmit failed
    17/08/2012 22:58:22.739 configd: network configuration changed.
    17/08/2012 22:58:22.757 configd: setting hostname to "richards-Mac-mini.local"
    17/08/2012 22:58:23.615 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    17/08/2012 22:58:24.263 com.apple.launchd: (com.apple.netbiosd[90]) Exited abnormally: Hangup: 1
    17/08/2012 22:58:26.961 com.apple.launchd: (com.apple.netbiosd) Throttling respawn: Will start in 5 seconds
    17/08/2012 22:58:26.000 kernel: Auth result for: 00:19:15:d0:d0:bd MAC AUTH succeeded
    17/08/2012 22:58:26.000 kernel: AirPort: Link Up on en1
    17/08/2012 22:58:26.000 kernel: en1: BSSID changed to 00:19:15:d0:d0:bd
    17/08/2012 22:58:28.000 kernel: AirPort: RSN handshake complete on en1
    17/08/2012 22:58:29.015 loginwindow: Login Window Application Started
    17/08/2012 22:58:30.108 configd: network configuration changed.
    17/08/2012 22:58:31.102 ntpd: proto: precision = 1.000 usec
    17/08/2012 22:58:34.116 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
    17/08/2012 22:58:34.117 UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
    17/08/2012 22:58:34.117 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on WLAN_D0BD because it is protected and not on the exception list
    17/08/2012 22:58:34.119 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
    17/08/2012 22:58:34.121 configd: network configuration changed.
    17/08/2012 22:58:36.581 com.apple.launchd: (com.apple.xprotectupdater[21]) Exited with code: 252
    17/08/2012 22:58:37.443 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    17/08/2012 22:59:38.200 warmd: [warmctl_evt_timer_bc_activation_timeout:260] BC activation bcstop timer fired!
    17/08/2012 23:00:30.000 kernel: disk0s2: I/O error.
    17/08/2012 23:00:32.977 ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
    17/08/2012 23:00:34.378 com.apple.launchd: (com.apple.coreservicesd[57]) Job appears to have crashed: Bus error: 10
    17/08/2012 23:00:34.380 mdworker: checkinWithServer(), failed checking in with coreservicesd, err=#-308/0xfffffecc (ipc/mig) server died serverPort=0x0 opts=0x0
    17/08/2012 23:00:34.380 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:34.385 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:34.385 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.319 mdworker: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
    17/08/2012 23:00:35.607 ReportCrash: Saved crash report for coreservicesd[57] version ??? (???) to /Library/Logs/DiagnosticReports/coreservicesd_2012-08-17-230035_localhost.crash
    17/08/2012 23:00:36.768 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:00:36.784 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:00:36.784 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:00:36.784 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:00:47.145 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a5 uid=0 euid=0
    17/08/2012 23:01:29.381 loginwindow: _RegisterApplication(), unable to get application ASN from coreservicesd, and this application requires an ASN, so aborting.  error=#-1.
    17/08/2012 23:01:29.382 com.apple.loginwindow: _RegisterApplication(), unable to get application ASN from coreservicesd, and this application requires an ASN, so aborting.  error=#-1.
    17/08/2012 23:02:38.676 com.apple.launchd: (com.apple.loginwindow[36]) Job appears to have crashed: Abort trap: 6
    17/08/2012 23:02:38.738 loginwindow: Login Window Application Started
    17/08/2012 23:02:38.916 WindowServer: Unable to open IOHIDSystem (e00002bd)
    17/08/2012 23:02:38.950 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    17/08/2012 23:02:39.031 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
    17/08/2012 23:02:39.104 ReportCrash: Saved crash report for loginwindow[36] version ??? (???) to /Library/Logs/DiagnosticReports/loginwindow_2012-08-17-230239_localhost.crash
    17/08/2012 23:02:39.195 airportd: _doAutoJoin: Already associated to “WLAN_D0BD”. Bailing on auto-join.
    17/08/2012 23:02:39.000 kernel: virtual bool IOHIDEventSystemUserClient::initWithTask(task*, void*, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    17/08/2012 23:02:39.886 com.apple.SecurityServer: Session 100006 created
    17/08/2012 23:02:39.889 loginwindow: Login Window Started Security Agent

  • In large PDF files my cursor moves around the page at warp speed. It does not seem to make any difference if I slow it down with Sys Prefs. This is not only in preview but also other programs to open PDFs.

    In large PDF files the cursor moves at warp speed with a mind of it's own, I've tried slowing it down in Sys Pref with no luck. On small files cursor action is normal. This happens in Safari, Preview and other programs that use PDF files. Sorry to say this does not seem to be a new problem with 7.# I've had it with prvevious versions of operating system Right now I'm using a Apple wireless mouse and key board. Using the USB keyboard and mouse the same problem does not go away.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Small changes to a web gallery slows iPhoto down to a crawl

    I am using iPhoto 7.1.1, the latest update at this time. I have a large number of web galleries published through iPhoto to .Mac. The latest is about 150 photos from Christmas. I originally published without changing the photo titles. I have been correcting that plus adding a few more photos. Any small change in a web gallery seems to be immediately published and that slows iPhoto down to a crawl. I have the fastest connection I can get from ATT's UVerse. Is there any way to turn off this immediate updating so I can make all of my changes then publish after that? I have been searching through the help files, Apple support, and the web and can't find anything. One poster on this site said his updates don't transfer until he hits the publish icon to the right of the gallery name. That's not how mine works. It automatically publishes at the slightest change. Others seem to say it is automatic for them as it is for me. It really is almost impossible to make lots of small changes to a large gallery (like adding descriptive titles) the way it is now.

    This "feature" also makes my nuts. I hate software that does these "automatic" processes, without a way for the user to alter them, or turn them off. I have been trying to change file names in one album that contains a number of images drawn from other albums that have been published to my web gallery. I do not wish the names to be changed in every album, nor in the web galleries published. But it all seems to be automatic. The name change first is applied automatically to the other albums that contain that image, and then automatically changed in every web gallery.
    I have posted these comments here: iPhoto menu -> Provide iPhoto Feedback.
    I suggest everyone that is concerned with these issues do the same. If we are lucky, Apple will soon update the software. These changes seem so easy to achieve one would think, and they would add a lot of control to the use of the program.
    Jim

  • HT201222 Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

    Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • 2nd Display: does it slow things down?

    This could be a really stupid question, so bear with me -- does the addition of a second screen to the imac duo slow the machine down? I have noticed that Aperture isn't quite as zippy, and I suspect it's a simple lack of VRAM because of the other monitor...
    True?

    All other things being equal, and the VRAM already being higly used, it seems perfectly logical that adding a secondary display would slow things down. Extra trips to main memory to fetch things that don't fit into VRAM do take time. No idea how noticeable this performance hit would be though/how much load would be required to make it noticeable.

  • When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?

    When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?

    from iphoto  Help
    Album overview
    A photo album in iPhoto is just like one you would create with printed photos: It’s a collection of photos you select from your library and arrange in the order you want.
    You can create photo albums to:
    Focus on a particular subject, such as your favorite nature photos
    Group pictures that you want to send to a friend, post on a webpage, or burn to a CD or DVD
    Gather a decade of anniversary photos
    iPhoto has two kinds of photo albums:
    Standard photo albums: You create these albums (B, shown below) by selecting particular photos. You can add new photos by dragging them to the album (or using the Add To button), and you can remove photos at any time. All adding and removing is done manually; iPhoto doesn’t update standard albums automatically as you import new photos.
    Smart Albums: iPhoto creates these albums for you, based on criteria your specify. iPhoto then updates Smart Albums (A, shown above) for you as your library changes. For example, you could create a Smart Album containing:
    Photos of specific people, such as your family members. As you import new photos, iPhoto uses Faces to detect your family members, and automatically adds new photos of them to the Smart Album (after you’ve confirmed the matches in Faces).
    All the photos of your daughter taken on school field trips in third grade. Use Faces (to name your daughter) and keywords (to mark certain photos or events as “field trips”) to help specify the photos you want iPhoto to place in that Smart Album.
    Only photos taken with a specific camera, or photos matching other Exchangeable Image File (EXIF) information.
    You can make as many albums as you like, and you can include the same photo in several albums without making multiple copies of it.
    After you create an album, such as “Australia Adventures,” it appears in your Source list below Albums.
    In full-screen view, the album appears as a stack of photos below Albums.
    To further organize your library, you can group several albums (along with slideshows and projects) into a folder. For example, you could create a folder containing several years of birthday albums or a collection of albums with photos of your camping trips.
    To create a folder, see “Create a folder in the Source list and move items into it” in “Customize the Source list”.
    Folders appear only in the Source list, not in full-screen view.
    Note: A photo album is different from a photo book, which is a collection of photos you create to get professionally printed and bound. See this topic: Photo book overview.
    Copyright © 2014 Apple Inc. All rights reserved.
    LN

  • Slow Shut Down Time For Macbook Pro Retina Snow Leapord

    Hello, I was hoping somoene could help me with the following problems.
    I have brand new Macbook Pro Retina, 15inch, 16G RAM, 500G of SSD, running Mountain Lion, and lots of professional recording software. My macbook frequently shuts down after 30 seconds, that wonderful grey wheel spinning in the center of the screen as if it were an old PC.
    I've contacted apple frequently. They check to see that I've repaired disk permission, they reset...the RAM i believe, they ask if i shut down all the programs. Even through doing all of this, usually my macbook takes 30 seconds to shut down. Sometimes it takes only 5, which is how it usually should be. ANd this occurence seems to be inconsistent with the apps I use. Sometimes it takes long to shutdown when i've barely used a thing. Other times it shuts down immediately when i've used a lot of different programs at once. So there's no constant.
    The apple boys suggest reformatting the computer to make sure it isn't a hardware issue. I refuse to accept that after only 3 months of use I already have to reformat everything. It's not the most enjoyable experience because I'd have to reinstal all my audio software despite Time Machine's magic tricks. Any suggestions?
    Here is a link I've found on the matter: http://thecustomizewindows.com/2013/02/fix-mountain-lion-slow-shut-down-time/

    These terminal commands decrease the excecution time of a process that has caused slow shutdown times for many users. This resolved my slow shutdowns. IF you are comfortable using terminal you can give them a shot, but be VERY careful using terminal.
    These terminal commands should also fix the problem then and kill the services after 2 seconds:
    Code: 
    sudo launchctl unload /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist  sudo defaults write /System/Library/LaunchDaemons/com.apple.coreservices.appleevents ExitTimeOut -int 2  sudo launchctl load /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist

  • How to slow things down to see the progress bar?

    how to slow things down to let the progress bar to show its progress?
    everytime i run the program i can see only two scenario: 1. 0% 2. 100%
    i think the stuffs are too little to make any difference.
    what should i add in the codes so that i can see the progress?
    thanks!
    here is my codes:
    jProgressBar1.setValue(1);
    do some stuff here
    jProgressBar1.setValue(15);
    do some stuff
    jProgressBar1.setValue(31);
    do some stuff
    jProgressBar1.setValue(41);
    do some stuff
    jProgressBar1.setValue(61);
    do some stuff
    jProgressBar1.setValue(100);

    Hi!
    When you call update on the progress bar, the value of the progress bar is updated, but it won't be reflected on the screen until Swing has a chance to repaint. Swing can't repaint until your code is finished. So, what's happening is something like this:
    setValue(1), do stuff, setValue(15), do stuff, setValue(31), do stuff, Swing Repaint
    Also, not only does this block the progress bar from updating, but as long as your code here is running it blocks all of Swing (repainting, handling events, etc...).
    If your "stuff" isn't very time consuming, just remove the progress bar altogether. Otherwise, to make things work properly, you'll want to move it to another thread. Then, from that thread you can keep the progress bar up to date with:
    SwingUtilities.invokeLater(new Runnable() {
        public void run() {
            jProgressBar1.setValue(xxx);
    });Hope that helps!
    Shannon Hickey (Swing Team)

  • Firfox slowing way down or hanging and task manager has multiple sessions of "plugin-container.exe *32" running.

    I'm running Win 7, Firefox 10.0.2 and all my plug-ins are up to date. I'm having issues with Firfox slowing way down or hanging, let say like when going to Youtube or site that just has a picture that uses Flash. I go to task manager and have multiple sessions of “plugin-container.exe *32" running at anywhere from 2,000k to over 300,000k (only one at the larger amount and most at 2m to 8m). I have to kill the multiple processes to get it running right again.

    Hi kb11,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-slow-or-takes-too-long-start performance troubleshooting section]? There is a lot of good information in there that should help.
    Hopefully this helps!

Maybe you are looking for

  • Custom Infotype length limitation

    Hi, I have a requirement to create a custom infotype in ECC 6.0 with a table control which can have a maximum of 50 line items. Something similar to basic pay infotype and PA0008. While going through the SAP documentation I found the below statement

  • MiniDisplay to DVI on Mac Pro

    I recently bought a refurbished Mac Pro (4,1) 2.93ghz Quad core and I'm trying to get 2 monitors working with it like I had with my G5. The problem is that I cannot get either monitor to work with the Minidisplay port. I've tried using a MDP to VGA a

  • Somyac Font Zoomer ruined my font size??

    I have a nokia n8 with anna. I recently installed font zoomer 3.20 full version. From there i notice a bug (wheneven in the photo gallery the options/exit buttons are in black instead of white making them impossible to see on a black background) so i

  • Excess Raw Material  issue & FG reciept in Make to order Production

    In MTO Scenario I have created sales order for 10EA.After MRP run planned order of 10EA was created.I converted to Production Order.GI of raw material & GR for FG happens during order confirmation.If for that customer during Production physically 11E

  • Busines rule in web form

    Hi, If I have a rule assigned to a web form that is 'Run on Save', can I stop it appearing in the list of available rules in the bottom left panel when I open the form? Thanks CD