Lightroom slows down at 4K Monitor

I encountered a significant slow down in normal Lightroom work (zoom in/out, rotate, develop,...) after switching from 1920x1080 hdmi to a 4K Monitor running at 3180x2160@60Hz Displayport 1.2. What can I Do to fix this issue? Anybody else who has this problem?

Hello,
there are a lot discussions about LR speed in this forum. Search for them, so you have lot of different meanings about this issue. My personal opinion is:
if you can wait, wait a few months. Adobe must fix this issus with LR6. And I expect LR6 betas in the next few month
rethink about your editing workflow. Do some adjustments as lens correction, upright, clarity / sharpening, extensive brush usage at last.
think about overclocking (in "turbo mode"). High CPU usage in LR is only for a short time. OC should not be a problem here. (Deactivte during video rendering)
By a cpu with the highest GHz speed in single core more. Less cores, more speed (The opposite is true for video rendering, but this can be done on GPU!)

Similar Messages

Lightroom slow performance causing Force Quit

After culling/editing about 40-50 photos in both "Library" and the "Develop" modules, Lightroom slows down to the point of not working. I try to close Lightroom but it stops responding so I am forced to "Force Quit." This happens every time I use Lightroom over the last month. This happened in both Lightroom 5.5 and the earlier version. I have an IMac 2.7mHZ Intel Core i5 with 4 GB of RAM. I have about 200,000 photos on external hard drives. Does anyone have any advice on how to fix this problem?

I would say that that 4 GB of RAM is slowing you down. I have found when my clients upgrade RAM to 8GB or more performance improved dramatically

Lightroom workflow slows down after modifying an image

Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gb

First of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one...

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.

External monitor slowing down my MacBook pro

I recently hooked up a brand new external Acer G205HV monitor to my 15" MacBook Pro (4gb RAM) using the mini display port to DVI adapter from Apple. I have an GeForce 9400M graphics card with 256mb ram. Whenever I have the monitor plugged in it slows down my computer tremendously. When I do not use the monitor, my laptop is back to being lightening fast.
Expose` and the dashboard lag a ton, and basically the internet craps out. I can barely load websites and streaming video has become virtually impossible. I have tried running with the laptop open and in clam mode. Same result. At first I thought I had a virus, which would be very very rare, but after using the laptop without the monitor I realized that the monitor was slowing me down.
The max resolution that I am running the monitor at is 1600x900 @60Hz. The DVI adapter is supposed to support a much higher resolution than this. Is my graphics card the issue? Any help is appreciated. thanks!

I have the same problem with a spring 2008 MacBook (4,1) with 4 GB RAM running 10.5.8. Using a DVI external monitor, the wireless speed drops by at least half and usually more. This is the case whether using a Samsung 2443 BW at home or a Dell at work. I've tried different DVI cables, changing channels from 11 to 1, no difference.
Took it to the local Apple store where they had only a VGA monitor to test with and, strangely, the wireless was unaffected. It was a small ACER monitor, a 15-inch or so, not wide-screen. Have had no other opportunities to try a VGA monitor, as I don't have a mini-DVI to VGA adapter.
But I wonder if there's something there?
Don

The monitor is slowing down the machine, 23inch

The monitor seems to be slowing down the machine. This is the reason we upgraded from a dual G4. When we work on 16 bit images it goes very very slow, but not if I change to a CRT monitor. What do we need to upgrade? Add another 2 gigs of ram for a total of 4 or get a 512mb video card.
Thanks

I can tell you now, it's not your display that causing the problem. I have a Mac mini driving a 24" display (1920 x 1200 resolution) that has the Intel integrated GMA950 graphics processor with 64MB system memory which is the lowest of the low and it drives it just fine.
Most likely you have a RAM problem as in you don't have enough of it. If you are using Adobe Photoshop CS2 I would suggest a minimum of 2GB RAM with an aim for 4GB RAM.

Lightroom slows all down

Hi everybody. My new Lightroom 3.0 slows down everything on my computer. After using it for a while it halts my computer. Usually i have to restart it by pressing the power button for 5 secs.
my system specs are:
Versión de Lightroom: 3.0 [677000]
Versión: 10.5 [8]
Arquitectura de la aplicación: x64
Cantidad de procesadores físicos: 2
Velocidad del procesador: 2,0 GHz
Memoria incorporada: 2048,0 MB
Pantallas: 1) 1280x800
I´ve tried optimizing the catalog. Erasing the previews and making them again, etc.
Nothing works.
I´m thinking on move back to lightroom 2.7 or, even better, using some other software.
please help cause i like lightroom and wouldn´t wanna change.

Thomas Achermann wrote:
My personal opinion is that the days of 32bit OSs are definately over - there are simply to many limiting factors for a modern, high-end application like LR. The HW has been around for severals years and it is nowadays relatively inexpensive.
But as with all thing in the computing world: you're mileage may vary
Grüsse in die Heimat aus dem Norden Lapplands...
I agree on that, but I just don't have the time to upgrade my two machines to a new O/S and install and configure EVERY f.... application again right now
If I had the time and nerves right now, there would be a top-level machine on my desk tomorrow!
Grüsse aus dem (schon wieder regnerischen) Zürich
Beat Gossweiler
Switzerland

LR 2.5 slows down after upgrading to Snow Leopard

This is my first post, so first of all I'd like to say hello to everybody here and apologize for my poor english
My computer is an iMAC with an Intel Core 2 Duo, 4GB RAM, 500GB HD and a graphic card NVIDIA GeForce 8800 GS with 512 MB VRAM.
The LR database is contains, up to now, about 5000 photos most of them in NEF format (my camera is a Nikon D300)
In the last month I noticed that the performance slowed down consistently as thumbnails refresh started taking a long time as well as editing photos and the overall LR2 (executing at 64bits) working.
I started monitoring the system, but despite the low LR2 performances I still had a lot of free RAM and the cores weren't really working a lot.
I can't say this for sure, but I could bet that the performance problems began with the upgrade to Snow Leopard.
Can anybody help me to solve this issue?
Thanks a lot in advance
Roberto

Ian Lyons wrote:
Lightroom performance should not have deteriorated as a result of upgrading to Snow Leopard. Things that you should check are:
1. that you are indeed running Lightroom in 64-bit mode (open System info under Help menu and check that Application Architecture shows x64)
2. that you have all of your previews rendered to at least Standard-size
3. that you have at least 20% free hard disk space
You should also run the Catalog Optimisation option in Catalog Settings
1. Yes, LR2 was running in 64 bit mode before upgrading to Snow Leopard, then (don't know why) gets back to 32 just after the upgrade and I manually set it to 64 bit (checked in the application and on the process monitoring while running)
2. I have the preview rendered 1:1 in the folder I'm working on (done again tonight)
3. I have 55% free HD space
4. I run a Catalog Optimization many times, The last one was tonight
In other words I've checked and tried all these things many times. I've red on the internet that it might be a geforce 8800 issue, but I've found only windows references. Don't forget that neither RAM nor CPU are stressed when LR2 is working and all other applications run normally

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Photoshop CC slows down suddenly, for several minutes

Hi!
I have a problem with Photoshop CC. I sit on a 27" iMac, 8GB RAM and an i5 processor, OS X Mavericks, Wacom intuos Pro tablet.
My problem, that suddenly occurs is tha Photoshop CC suddenly slows down to a halt. No error messages, it just gets very very slow. The first sign is that I suddenly cant zoom. I try to zoom, and nothing happens. Then the cursor, still able to move around with no problem, wont change to an arrow when hovering over buttons or menu items. If I open Safari, everything works fine, exept if I go back to Photoshop, then only the properties window will show. Photoshop is like this for up to ten minutes, then suddenly everything happens at once. All the zooming, closing of images if I tried that (with the keyboard), and then it is all fine again.
The problem occurs both when I do complex work with many layers, but also when doing simpler work with just a few layers.
I have 850GB free storage space and Photoshop is allowed to use 5GB of RAM. I usually dont have open more than two pictures at once. I use Lightroom 5, and PS CC as an external editor.
Any ideas how to solve this? It does sound like PS is writing alot to the HD sometimes, but it should not get this slow anyway, and the program does not freeze as in software error. I dont need to force quit PS, I just need to wait it out. Very annoying!
Sorry for my bad English! It is not my first language

Tells us a bit more about the work you are doing:
How many layers?
What types of layers? Shape? Text? etc.
Document dimensions?
Bit depth?
File size on disk?
Also, tell us a little about how things are set up:
Where is your scratch disk?
How much free space on that disk?
How much RAM?

Internet speeds keep slowing down to a crawl

I'm having a problem that has only developed in the past week which was during a time when I haven't changed any configurations in that period of time since my son was born a week ago yesterday and I obviously had more important things to do than mess with my network configurations. However, about 2 weeks prior to his birth, in the process of configuring a baby monitoring system with icam source, 3 weeks or so ago, I read that I might be able to improve my internet performance, I ran googles namebench a couple of times and added and re-ordered the DNS servers that had been listed prior to any problems developing based on its' reports. My internet speeds improved as a result of changing those DNS settings and stayed good until the past week. But of course, we now need to use the computer as part of our baby monitoring system and it's not working worth a **** and I'm getting frustrated since I can't put my finger on the problem and I don't really have time to spin around in circles right now. I'm sure it's probably something simple and I can't put my finger on it though. Sleep deprivation is new to me.......
I've kept running log of notes so this is a little deshoveled but I figured the more information I provide the better the chance someone might help me get this solved quickly.
In the last week, since my sons birth, my internet speeds would be okay after restarts and resetting everything, 2.5 Mbps or so but after a 10-15 minutes it starts to slow down to .2-.3 Mbps. I went thru all my network settings, restarted everything, repaired permissions, I've changed ethernet cables reset PRAM, firewall is running, stealth mode enabled, allow signed software incoming connections and my various other programs such as netsessionmac4f3c6b, skype, java, itunes, etc.
All sharing services off and pretty basic login items at startup including growl.
I had AT&T come out and check my DSL line and everything checked out on their end up to and out of the DSL modem based in their equipment tests.
The problem seems to start when I connect my imac (a fairly loaded 27" imac I got in Dec.) First off, as soon as the imac is connected to the modem via ethernet, the old ethernet modem flashes and continues to flash, even right after startup. So the tech thought something was running in the background and I can't figure out what. I looked through login items but don't see anything that would be a problem and am afraid to eliminate everything.
So I created a guest account to eliminate any login items (I think) and in I got 5.69 Mbps right off the bat. But after a minute or two, without changing anything my download speed slows down and I get for example .77 Mbps. The same thing happens with my administrator account on the imac. Fast speeds at startup and more importantly if I change the configuration by switching between ethernet and airport, I get fast speeds right after changing the configuration but after a minute or two I am well below 1.0 Mbps. I've got several network configurations with automatic, airport and ethernet set up in different ways including a clean ethernet connection with the original DNS settings.
I haven't set up an airport only account but that really isn't the way I want to hook up the computer that sits right next to the modem and runs my network. Restarting the old modem and direct connecting the computer to the modem results in the same thing happening.
I connected my ethernet from the (old?) modem directly to my ancient powerbook G4 and I got +5.6 Mbps download but it also slowed down to 300 kbps after 5 minutes or so the first time (old modem?)
Now to explain why I have "old?" listed above. I was then able to get a new DSL modem from AT&T, hook it up just fine, get enormously faster internet service in the 5,000 kbps only to have it slow back down to around 300 kpbs after connected for several minutes.
directly connected to imac-bypassing router
3,500 kbps
after 15 minutes-250 kbps
connected to imac thru router/time capsule with airport extreme
2500 kbps
after 15 minutes=166 kbps
directly connected to an older powerbook G4 with new modem
IP address of 192.168.1.64
5.65 Mbps on speedtest
after 15 minutes=5.67 Mbps
after 30 minutes= 5.59 Mbps
1 hour-5.66 Mbps
Very solid, stable readings for what I am used to. This would seem to isolate the problem to the imac.
directly connected to imac with new modem
IP address of 192.168.1.64
5.8 Mbps on speedtest
after 30 minutes= .60 Mbps-ping takes 250 ms
1 hour= .46 Mbps-ping takes 250 ms
Now a problem that only started last night after I hooked up the new modem and started up my old Time capsule/airport configuration, I got a message that said something to effect of "another device on this network is using computer IP address 192.168.1.64. So I tried manually changing last digit of the IP address on the computer to one number higher and it kept saying the start and end range were incorrect so I shut the airport station down since when it was connected, it would not allow the computer to connect thru the router via ethernet. I did a hard reset on the airport and I got it back up and running just fine but the internet speeds on the imacs' ethernet connections are so slow it's practically worthless. I also checked to see what was connected to my airport on any given occasion, 2 iphones, 2 pads, another imac running upstairs and a newer powerbook running icam source that is supposed to be the baby monitor. Except for the laptop everything can use "802.11n" but the powerbook only connects via 802.11g so I have set the airport to that limiting setting.
Any suggestions? Is there a way for me to log what is happening so I can report in more detail?

First thing is to check if the wireless is on a sensible channel: HomeHub doesn't always make sensible choices. Install inSSIDer on your laptop and see what other devices there are around and if there is any clash. Also, try moving the HomeHub around a little, even quite small differences can make a big difference to wireless signals.
You could run an ethernet cable from downstairs to upstairs. Easy to do, but can be a bit unsightly. If most of your devices are upstairs, you could use this cable to connect the modem to the HomeHub. If you have devices both up and down, you may want to keep the HomeHub downstairs and add a switch upstairs.
HomePlug may be suitable for you. If you search Amazon for HomePlug you will see a couple of kits for just over £30. Don't go for an 85Mbps one. A 200Mbps such as the TP-link or D-Link should be much better than wireless, but not as good as a cable.
Depending excatly how many devices you want to connect and where, you can pay more and have a builtin wireless at one end: http://www.amazon.co.uk/Devolo-1408-Wireless-N-HomePlug-Adapter/dp/B00472MMCQ/ref=sr_1_15?ie=UTF8&qi... Or it may be best for you to use the basic devices and add an old wireless router in switch mode.

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

System Slows Down and Freezes a LOT - Memory? Swap? Hard Drive? AV?

I have a 2.4 GHz 24" dual core iMac (identifier: 7,1). It worked fine for a good while and lately I've been having problems that seem to be getting worse (sometimes it seems to get better, then worse again). I have 4 GB of memory and I'm waiting for more RAM to upgrade it to 6 GB, since I hear that's the max anyone's run successfully in this model.
I've often had a number of programs running at once. Usually I have Firefox, Apple Mail, the KDE's Konsole and Kate (from MacPorts), Calendar, Stickies, MacIago, and Pysol running. (Yes, it helps to have a few games up for breaks when I'm working.) I know that's a lot, but for well over a year, I was working with that setup without problems, without getting stuck for long times with the pinwheel of death or anything like that.
I'm not exactly sure when it started, but now I have times where I will do something and the program will freeze and I get the pinwheel of death. I wait and after 30-60 seconds I can do something, but sometimes I still get hesitations and a start-freeze&stop-go mode for a bit. Sometimes this freezes the whole computer for up to 30-60 seconds and I can't even check another space with Command-Arrow.
I've been trying to backtrack to see if I could figure out what is causing this. Sometimes killing Firefox helps, so I switched to Chrome and watched for usage on Activity Monitor and Chrome uses FAR less CPU time. I have FlashBlock and AdBlocker Plus on Chrome (had it on Firefox, and before that, used NoScript for blocking). But I've seen this happen even without a browser open.
I suspect this could be an issue with swap, since recently I was watching and saw spikes in disk usage around these times, but I'm not sure of the correlation yet. Sometimes it seems like whenever I switch to a different program, whenever I use a new feature, I have to wait (as if it's loading library code or something).
Again, this is a recent issue.
I've upgraded from 10.6.5 to 10.6.6, so I don't know if that could effect this.
I've also started using the free version of Sophos Anti-Virus (which is apparently impossible to quit once it's running) and thought it might be doing scans.
What's also puzzled me is seeing that, with 4 GB of memory, Activity Monitor continually shows 1 GB free, but still indicates 2 GB swap files. So is there a reason 25% of my RAM is not being used?
I've also checked and found my drive to be heavily fragmented. I bought iDefrag, but it can't defrag it because there seem to be some bad blocks. Rather than mark them as bad every time it hits that spot, it just tells me it can't access that part of the drive.
My guess is that OS X, for some reason, leaves a set amount of memory free to use for various reasons and that, due to fragmentation, what was once an easy task of accessing something in a swap file is now time-consuming.
Is that on target? What else could be causing this problem? This is beginning to make my iMac unusable. If it's just swap file issues and defrag problems, I'm thinking of cloning my internal 320 GB drive to a 1 TB drive and replacing the original, then running iDefrag for good measure and continuing from there. (It seems like in OS X finding bad blocks is difficult, from what I've seen.)
What can I do and does anyone have any idea what the problem is? I'll be glad to give more details if that helps, but I've tried to include as much as I can already.
Thanks for any ideas or help.

Considering how I've solved this, I'm pretty much shocked that nobody had any answers for this.
I upgraded my drive from the standard 320 GB drive (which had about 79 GB free on it). I used Carbon Copy Clone to copy my system drive to a 1 TB drive, then swapped out the 320 GB for the 1 TB. When I booted it up and started working, I noticed it was back to the way things used to be: I could go from one program to another to another with NO problem at all. No pinwheels of death and I even added a few more more running programs and still had no issue.
I have no idea why, but before, even when there was a 2 GB swap file, 1 GB (out of 4 GB) of RAM was always unused. I don't know if the OS looks at what it can access and figures read/write times and uses that to figure out how much memory it can effectively handle or what, but now I'm using almost all of my 4 GB of RAM and the swap file is smaller than it was.
So upgrading to a larger drive made a HUGE difference. I'm willing to bet that defragging the old one would have made a difference as well, but there were problems with some files and iDefrag could not read them, which also makes me suspect that drive was on its last legs and close to failure. (That and bad sectors could also have slowed down swap, along with fragmentation issues.)
The solution was a bigger drive, but I suspect defragging the old drive might have helped (if it weren't for possible bad blocks). I know deleting files from the old drive did not help too much.

I just upgraded to Maverick on my2 year old Macbook Pro and it has slowed down the computer terribly. All I see is that whirling circle every time I do anything. How do I go back to old OS. Terrible upgrade -- forces you to buy a new Mac!!!!

I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly. All I see every time I do anything is that crazy circle going round and round. I don't recommend you upgrading. How do I get rid of it. I believe it forces you to buy a new macbook!!!!

It does not. First things first have you tried restarting?
Try restting PRAM
http://support.apple.com/kb/HT1379
Try booting up in Safe Mode
http://support.apple.com/kb/HT1455
Also open "activity monitor" and look and see what is using a lot of processing power.

Lightroom slows down at 4K Monitor

Similar Messages

Maybe you are looking for