Lightroom Tethering 1D Mark II N Mac (Yosemite)

Hi, trial version of LR expired -- don't tested tethering with my Canon EOS 1D Mark II N on Firewire to Thunderbolt on my Mac, anyone any experiences? Doesn't work with USB.

maltescot wrote:
Okay, do you think or know that it works with the 1D Mark II N?
Just so that you understand how Lightroom tethering support works: it is based on something called a Software Development Kit (SDK) which the camera maker provides. This contains the code which Adobe needs, and adds to Lightroom, so that Lr can tether to the camera.
Canon dropped your camera from its SDK around the time of Lr 4. So after Lr 4, no tethering support.
So Lr 5 can still read and import/export the CR2s from the 1D Mk IIn, but it can't tether to the camera.

Similar Messages

Borderless printing in Lightroom 5--Mac Yosemite, Canon i9900. Selected 8.5x11 borderless media, but LR insists on printing with borders. Tried adjusting cell size and margins, but LR won't allow setting to zero.

LR won't allow me to adjust the margins below minimum values of about 0.25 in. Borderless printing and 8.5x11 borderless media are selected.
LR also won't allow me to increase the cell size. It seems to have a maximum of 8x10.68.
Aspect ratio of the image I'm trying to print is 8.5x11 so it should be a perfect fit.
When I print the same image in Photoshop, it prints borderless just fine on the same printer.
Mac, Yosemite, Canon i9900.

I have had some more trials to print without boarders. This time, it was inside of iPhoto. I had made a greeting card and wanted to print to a custom size. but without the ability to select the size as a boarder less size, I was unable to print directly. So instead, I had to save as a pdf > save pdf to iPhoto and then print the image as a photo (instead of a card).

Lightroom cannot read external harddrive after MAC upgrade

Hi,
I recently ugraded to MAC Yosemite and now Lightroom has "?" next to all my folders and cannot find my pictures. I have over 50,000 pictures ...HELP! My computer is showing that my external with all my pictures is there.
Thank you!

Follow these instructions to fix the problem: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Hi I up loaded to Mac Yosemite and my ccs5 quit. Can uninstall and reinstall the program or will it simply not work withyosemite. Thanks Bob

Will cs5 work on Mac Yosemite?

Upgrading Yosemite breaks the CS5 install, so you need to uninstall/reinstall CS5 to fix it.
Update Yosemite to 10.10.1 Then reinstall.
The install sets CS5 back to 12.0.0, so don't forget to run updates.
It should work after that.
Gene
(If my answer worked, mark it as correct.)

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

How do I set up a second iCloud account on my Mac (Yosemite)?

How do I set up a second iCloud account on my Mac (Yosemite)?

Hi selmjan,
Welcome to the Apple Support Communities!
I understand that you would like to set up iCloud on your Mac. Please use the attached web-link for information and instructions to complete this process. If you need information more specific to your situation, please let me know what step in the process you are on.
Apple - iCloud - Learn how to set up iCloud on all your devices.
Cheers,
Joe

Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

Error installing Adobe Download Assistant on Mac Yosemite 10.10

I am trying to install trial of elements 13 on Mac Yosemite and getting the following error while installing the Adobe Download Assistant - This application cannot be installed because the installer has been misconfigured. Please contact the application author for assistance. Please help!

I have the same problem with today´s version of Adobe Flash player on Mac OSX 10.6, and with Safari. It works with Firefox 9.0. The problem has been present for versions of Safari and Flash for over 6 months. I am using a MacBook Pro bought in April 2011.

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

??? I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software. When I open it I get: "An error occurred when attempting to change modules". It won't import photos and has no side panels under Library. What should I do?

I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software. When I open it I get: "An error occurred when attempting to change modules". It won't import photos and has no side panels under Library. What should I do?

I Nearly bought from Amazon too but I found a thread from Adobe stating that the only recognized outlet for lightoom is themselves and other outlets serial numbers will not be guaranteed.
THat at was sufficient for me to buy direct from Adobe, hope you get it sorted.

Unable to select logical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1

Hi Team,
I can not select logical and physical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1 (Java SDK 1.8). DataModeler does not allow me to select them. I mean the next scenario: I create two entities (or tables) and add a logical (or physical) relation between them. After this I can not select the relation in diagram window. Meantime I still can select the relation in browser window.
Could you please suggest me is it a bug (maybe a platform specific problem) or did I miss something in software options?
I found a topic about the same issue. It describes the same problem, though the topic is without an answer and was archived.
New bug - Unable to select logical relations in version 4.0.2.15 Build 15.21 on Mac
At the end, if this is a bug (even a platform specific one), where may I publish details about it to ask for a fix from Oracle team someday in future?
WIth best regards,
Kostyantyn

Hi Philip,
Thank you for the good hint about "default line width and colour".
Meantime the option does not resolve the problem in my case.
According to your suggestion I set maximal width for relation lines and I still can not pick (select) it in diagram window.
I checked behaviour of DataModeler with next display resolutions on MacBook Pro (Retina, 15-inch, Mid 2014) in System preferences Displays: "Best for display"; Scaled "More Space", "Larger Text", and "Best (Retina)"... And the problem takes place in all these cases.
Please see attached image - this is how I see the relation line. And I still can hit it!
If I use the DataModler on a casual external monitor, the problem is absent (no matter what a width is). Also I believe the problem takes place only on mac retina displays. Therefore I think this is a platform specific bug.
I do understand a root cause of the problem may have no direct relation with Oracle DataModeler source code.
With best regards,
Kostyantyn

Folder with question mark and smiling mac face at start up

After I was importing some video today, shut down G5 and on start up I get the folder with question mark and smiling mac face.
Any help?
Power Mac G5 Mac OS X (10.4.8)

Boot from a drive with Disk Warrior 4, or your emergency boot drive (FW or alternate) or if you lack that, use single user mode to run fsck command. The last option would be your Tiger DVD but that may be 10.4.3 or earlier and not your best.
I say that because it seems like it was more than just needing to reset the startup disk preference and may have a corrupt directory. It shutdown smoothly and fully?
At the least, using the OPTION key and SHIFT key for Safe Boot. My recollection of trying to do both is that it won't. You can do one or the other, but not both. So running FSCK is just insurance to repair the directory.

Nokia photo transfer for Mac Yosemite OS

Hi,
It seems that Nokia Photo Transfer does not work in the Mac Yosemite OS – at least it does not find my Lumia 1020. Is there any chance of getting an update – or is there any other way to transfer photos speedily by a USB cable from Lumia to Mac?
Cheers,
Ilkka

@Ilkko Photo Transfer 1.2.31 works with my OS X v10.10.2 and my Lumia 1520 phone with Lumia Denim as firmware. I attached the Lumia before I started Photo Transfer. Then, Photo Transfer asked me to unlock the password protected screen. Do you face any error message? We need that word for word.
If you do not face any error message, please, enbale (tick) Photo Transfer » Menu » File » Enable Logs. Then, go for Finder » Menu » Utilities » Console (left hand side, All Messages). Anything specific there? You are able to copy and paste it here.
If nothing is displayed in OS X Console either, please, go for Menu » Apple » About this Mac » More Info » System Report » (Hardware) USB: Is your ‘Lumia 1020 (RM-87x)’ listed there? Via System Information » Menu » File » Refresh Information, you are able to detach and attach your device, while double-checking the displayed information.
If your phone is not shown in System Information, did it work before? Which operating system and version?
If your phone is shown in System Information, please, we have to go for the USB Prober. However, because I have not tested that app on Yosemite v10.10 my self either, please, answer the above questions. Then, I look into that path here in more detail and give you an explaination what to do.

Lightroom Tethering 1D Mark II N Mac (Yosemite)

Similar Messages

Maybe you are looking for