Lightroom Trial Version Not Importing TIFFs

This morning I installed the 30 day trial version of Lightroom. If I import a folder of mixed RAW and TIFF files, I see ONLY the raw files in Lightroom. If I go back into the import dialog and select the TIFF again and try to import, a message is displayed that the CR2 file has already been imported into the library. If I drag a TIFF into the library, the RAW file comes in instead.
However, if I export a RAW file from Lightroom as a TIFF and then try to re-import it, the import is successful and I can see it. I do not recall this occurring in the LR beta. Any suggestions?
I'm running Windows XP Pro with all service packs installed. AMD 3800 dual core PC with 2 gb RAM. The images are from a Canon 5D, and were cropped, edited, and saved as LWZ compressed TIFFs using ACR in the CS3 beta. The TIFFs open fine in CS2 or CS3. Any ideas as to why this is happening?

Yes, they are the same name.
My workflow is to import the RAW files to Bridge, rename the RAW files(for example "wdn_070219_0001", etc.), add metadata and ratings. Then, as I make TIFFs, I leave them in the same folder until I'm ready to store the whole project into DNGs, TIFF edits of the original files, etc. I'm likely able to import the older TIFF's because I've converted the RAW files to DNGs and archived those off to a separate folder. What you are saying is, as I save off edits or conversions to TIF, create a separate folder right off the bat.
If that is the behavior, its too bad that it is different from Bridge in that respect. You'd think that if Bridge can differentiate the saide car files from the RAW image, LR would too.
Thanks for the feedback. I'll work with the product with that in mind, for the time being at least.

Similar Messages

Lightroom 4 does not import RAW files from D610

I've just purchased Nikon D610, and my Lightroom 4 is not importing RAW files anymore. What is the problem?

The current version of LR 5 is 5.7 so I’d guess LR 6 will be out at some point later this year, in the next few months. If money’s no object then upgrade to LR 5, now and to LR 6 in a few months. If you’ll be very upset to learn you’ve paid $80 to upgrade and then need to pay another upgrade fee for LR 6 then maybe wait and do the DNG thing for a few months, and then upgrade from LR4 to LR6.
The other concern is whether your OS is new enough. I’d suggest you download the latest LR 5.7.1 update and run that in trial mode for a few weeks—you have 30 days, to make sure your computer can handle it, before spending the money and finding out you need a new computer, first.
The other thing to consider is the $10/month Photography Plan subscription which gets you the most up-to-date versions of Lightroom and Photoshop as long as you keep paying. Since you have your old LR4 serial number, you can decide to cancel the subscription after a year and use the LR4 serial number to buy the LR 6 upgrade, then. This assumes that LR 6 will be available as a serial-number-licensed product, still.
The latest LR 5.7.1 update is here:
http://www.adobe.com/downloads/updates
The lens profiles added to each version are listed here:
http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html

Lightroom trial version, windows

cannot install lightroom trial version on windows vista laptop, the exe program does not run.

Lightroom does require 64-bit support. Your processor does support this but you will want to see if your operating system is 32-bit or 64-bit. If it is 32-bit then you will need to install a 64-bit version in order to utilize Adobe Lightroom.
You can find the system requirements for Photoshop Lightroom at http://www.adobe.com/products/photoshop-lightroom/tech-specs.html.

Lightroom 5 does not import the GPS-files taken by the Sony A77. When i open the Bridge, there i can see them correctly. Can you help me? Thank´s a lot!

Lightroom 5 does not import the GPS-files taken by the Sony A77. When i open the Bridge, there i can see them correctly. Can you help me? Thank´s a lot!

Deleting this discussion as it is a duplicate of Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

Can I install presets on the Lightroom trial version?

Can I install and use presets on the Lightroom trial version?

Yes. The trial version is the full version of Lightroom, and it is fully functional for the 30 day trial period.

Lightroom 5 will not import selected images from my SD

Lightroom 5 will not import selected images from my SD card on my IMac . My Camera is a Canon 650D it will open them on my pc copy. My Lightroom 4 on my IMac will also import from an sd card. Help please.

Why not? What happens? If there is an error message, please quote it in its entirety, word-for-word, verbatim.

Trial version not full functioning?

To ry out some features, I follwed the tutorial video for using the healing brush to remove objects from a photo - in my case two people from a group photo. I selected "Expert", then the spot healing brush, brush size 20px. Content-Aware was selected. But when I tried to paint the objects to be removed, it did not work. All I got was a + and not the paint brush. Is the trial version not a full functioning program?

The trial version is the same as the purchased version.
Have you tried content aware move?
It's the tool bottom left in the tools pallet in expert mode.

Lightroom trial will not install

Lightroom trial will not install , javascript error? Mac OSX10.8.5

Scrappy1 what do you mean exactly by doing a scan?
Under Windows 7 you will want to use the Programs and Features Control Panel to remove your installation. I would recommend verifying that Photoshop Lightroom is removed from the list of installed applications.

Trial version of Lightroom 5 will not import from a media card [was: Terrie]

I have the trial version of lightroom 5 & it will not import from a media card

Do you mean that the automatic import dialogue box does not appear?
Or something else?

Limitations in lightroom trial version

Perhaps a dumb question, but I just downloaded the LR trial version. I do not see the "File Renaming" menu in the Import module. I'm watching a tutorial (from Adobe) that is talking about this, but I don't see it. Is it disabled in the trial version?

The trial version is the same as the purchased version. Only difference is that the Trial expires in 30 days. The rename feature during import is only available for "Copy" or "Copy as DNG". It is not available for "Move" or "Add".

Lightroom 3 will not import any images

[I replied to another thread, but it doesn't seem to be coming up at the top of the post list when I update my information, so I'm reposting in the hopes that someone will notice and offer some helpful advice, as this is rapidly becoming infuriating.]
I'm running LR3 on Mac OS 10.6.4.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter and Lightroom 2. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 continues to import just fine.
Anyone have any suggestions?

OK, I _think_ I have the cause & cure.
Cause:
Canon says the software [firmware?] bundled with the Canon Rebel XT "is not fully compatible with the latest version of OSX." I can continue to automatically bring up iPhoto or use ImageCapture, in any case. Thanks, but I want LR3. Canon recommended that I set the controls in ImageCapture to specify opening LR3 when a camera is detected. I did, but it was doing this before, so I saw no difference. Also, I'm not sure it was doing it reliably, before or after this change.
This software incompatibility might explain why the Canon Rebel XT was not loading into LR3, but would not explain why it was not recognized by the Finder to add to the Devices list. The Canon wouldn't get added to the Devices list in OSX 10.4.11, either.
ImageCapture could easily see the images on the camera, and could copy them to a HD without difficulty. But it's not LR3, and nothing convinced the Finder to add the camera to the Devices.
Cure:
What I did find, eventually, as a method for persuading LR3 to import properly is this:
I set ImageCapture to open itself when it recognizes a camera.
I jack in the camera, and ImageCapture opens.
THEN I open LR3. It comes up with the present images in the library.
I _click_ on the Import button (lower left), OR use the keyboard command (cmd-shift-I). It opens the import display, _with_ the images from the camera.
I set the LR3 import settings as I want them - I Copy the files, change file names, presets, etc. as desired. (I make a habit not to erase the camera files, until all is said and done, and the camera is disconnected from the computer.)
I click the Import button, and it does!
SUCCESS!
If I have it open ImageCapture first, that seems to persuade LR3 that images are on the camera.
Sometimes iPhoto accomplishes the same end, but I'd rather not launch that - subsidiary issues.
I went through this sequence a number of times, starting from neither software open. I tried different sequences - LR3 then ImageCapture, camera first or last, etc. The above sequence worked reliably; the others' responses confused me.
Those of you with similar Canon uploading problems, see if this helps any. If you don't have ImageCapture, try it with iPhoto instead. Just open it first.
sandrift71, does this answer your original question & resolve the problem for you?
Message text clarified - edited by: Jay_Warner

Please help me remove Lightroom trial version.

I wanted to try adobe's Lightroom and downloaded and installed the trial version. I have decided not to purchase at this time and attempted to uninstall the product. I beleive it is crashing my computer as it is the only new program i have installed in literally years. This is the error message I am receiving. Can someone please help me? Thank you.
Error opening installation log file. Verify that the specified log file location exists and is writable.

If you cannot install the same thing over the top of what is there, then try installing the LR 5.3 update from: http://www.adobe.com/downloads/updates

Acrobat XI Pro loads as trial version, not registered version, after MB & CPU swap, it is registered

I have been a registered user of Acrobat since version 3.01. Never had a problem until now!
The CPU on my MB died last month so I had to replace the CPU, MB (and I upgraded the memory).
When I rebooted the new system (with my existing hard drive) Acrobat XI Pro now shows up as a trial version. Not regsitered, which it does show up as on the the Adobe website.
What should I do?

Thank You
I am not PC illiterate, been building them there thangs fer nigh on 25 years.
I don’t know how you could have responded within 2 minutes, unless your last name is Adobe.
I was just afraid to try in case it got me into deeper water.
Suspecting that you might be a member of the Adobe team or a very loyal Adobe fan (to have responded so quickly) I went for it.
As you knew, yes it worked but I don’t feel foolish, sometime the better part of valor…, etc.
Thanks a lot.
Jeff

SAP Netweaver 7.01 ABAP Trial Version not working

Hello,
I am trying to load SAP Netweaver 7.01 ABAP Trial Version on VISTA. I am having two problems.
1. When I try to start NSP using SAP Management Console, I am prompted with a pop-up window labeled "WebService Authentication." The first parameter for User is automatically filled with value Home-PC\RESkater. It also asks me to enter Password. I do not know what to enter for password.
2. After I installed the SAP Netweaver 7.01 ABAP Trial Version, the download instructions says that I can sign on to system via web gui using http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000. However, I receive the error message stating "local host is not set up to establish a connection on port 8000 with this computer."
Can anybody give me any helpful tips that might resolve these issues for me?
Thanks.
Rae Ellen Woytowiez
Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:35 AM
Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:36 AM

Hi Rae,
Regarding issue 1, you to startup NSP, you need to remove the Home-PC\ portion of the username. So your username should only be RESkater. Then the password should be the same as the password that you use to logon onto the operating system for user RESkater.
Hope this helps...
Thanks,
Miguel

Lightroom 3: images not imported because the files can not be read:

Nikon D700 NEF files are fine. I can copy them to a folder and work with them in Adobe Bridge and Camera Raw.
LR3 will not import them to the existing catalog from the CF Disk or from a folder on the c:\drive. I tried creating a new catalog -- the same problem occurs.
Suggestions are welcomed.

I have the latest version
LR 3.4.1
Camera Raw 6.4.1
I created a new Catalog in c:\My Documents\LR2011\...
Running Windows 7 64 bit
Emptied the ReCycle bin
Have plenty of storage...
Now I'm getting the message: "Could not copy file to requested location"
Everything worked fine with LR 2 and the LR 3.0
Since upgrading I can't read NEF files from my D700 or copy to requested location. LR will display thumbnails, but I can not add to my now, non-existent Catalog...
What a farce!!!

Lightroom Trial Version Not Importing TIFFs

Similar Messages

Maybe you are looking for