Lightroom3 and Camera Raw 6.1 update

I am installing LR3. The "Readme" notes advise that the Photoshop Camera Raw update must be installed "...to ensure compatibility with Lightroom Develop settings."
However, the info on the download page for the 6.1 CR update advises that this update is not compatible with versions of Photoshop earlier than CS5.
CAn anyone advise what is the situation if I am still using Photoshop CS4?
Thanks

You can use all of the new LR 3 image processing goodies except for profile-based lens corrections and perspective transform corrections.
Specifically, everything except:
- Controls in the "Profile" section of the Lens Correction panel.
- Controls in the "Transform" part of the "Manual" section of the Lens Correction panel.

Similar Messages

Photoshop 12.0.2 and Camera Raw 6.3 updates available

http://www.adobe.com/downloads/updates/
Camera Raw 6.3 update details here:http://blogs.adobe.com/lightroomjournal/2010/12/lightroom-3-3-and-came ra-raw-6-3-now-available.html

I have just installed these updates (& Lightroom 3.3 after them) & I'm now getting an error message when CS5 loads...
"Photoshop.exe Unable to locate component."
"The application has failed to start because MiTwain.dll was not found. Re-installing the application may fix the problem."
Following clicking on the error message box to close it CS5 does go on to load. I can then open files. But as I don't know what the error relates to I am reluctant to try any image work.
I have never had this error message before, and have had no problems at all with CS5 prior to this (apart from it running slow-ish on my old machine).
Can anyone shed any light on this error & what it meeans - do I really need to re-install?
Thanks for your help in advance!
Myke

Adobe DNG Converter and Camera Raw 4.5 update available

See: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3940 for both.
See: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3942 for Camera Raw 4.5 update only.
Neil

>> Yesterday's ACR+Photoshop+Bridge works fine here
I am talking about very specific conditions outlined here that spanned two intel boxes on trustworthy 10.5x installs...
Buko, "Bug: Multiple Files Open ACR Crashes Photoshop..." #1, 10 Jun 2008 2:57 pm

Troubles with auto update mechanism and Camera Raw 7.3 update

Greetings,
Attempted an update using the update mechanism from Bridge. CS6 Design Premium on Mac. Received a couple error messages when it completed. Foolishly I did not write down the details. I thought I could just run the update again. When I attempted this, received mesage saying I was updated. But when I use Camera Raw plug-in within Bridge, it says I am still using version 7.2...
How may I attain a sucessful Camera Raw 7.3 upgrade?
I also use Lightroom which sucessfully upgraded,to 4.3 (with Camera Raw 7.3), but I often too use the Camera Raw Plug-in from within Bridge and would like to be on the same 'level'.
I thank you for any insight.
Best regards,
Alan

I updated CR to 7.3 yesterday and had nothing but problems after that. When I opened a photo in CR, it still showed 7.2 even though I got a message that said update successful. I had lots of problems using bridge which caused my computer to freeze. Using Mozilla Firefox was also freezing. I had to actually use the "off/on" button on my computer tower to shut it down. I was unable to restart. Lots of problems. Finally used "system restore" to an earlier date (which wipes out all updates back to the date I chose), and that worked. NO more problems. I'm waiting a while before trying to update CR to 7.3.

"Edit In" Photoshop CC not working for RAW or DNG files after applying LR 5.3 and Camera Raw 8.3

I just applied the Lightroom 5.3 and Camera Raw 8.3 updates and now am no longer able to open RAW or DNG files into Photoshop CC. When I select a file and choose "Edit In" Photoshop, photoshop will launch, then nothing will happen. After 2 to 5 minutes, an error will popup in Lightroom saying "The file could not be edited because Adobe Photoshop CC could not be launched." An error I've never seen before. When I click "Ok", Lightroom will show that it's "preparing a file for editing" in the upper left, it will create and save a psd to disk and in the catalog (another new behavior), then it will open in photoshop. All other file types (jpgs, tiff, psd) seem to work/open fine between applications. No difference if I open photoshop prior to selecting "Edit In". Selecting "Edit In" other applications, like Viveza, work fine.
I tried first deleting preference files in both applications. No luck. Ditto for plugins. Notta. Eventually I completely uninstalled and fresh installed Photoshop, Lightroom, and Bridge from the cloud. Same deal...can't open raw/dng files into Photoshop.
I'm at a complete loss, dead in the water, with a mountain of editing work piling on top of me. Kicking myself for applying the upgrades, which I had been delaying for some time to avoid just such a cluster%#$. Ugh.
I'm on a PC running Windows 7 64bit.
Any suggestions would be greatly appreciated.

In the normal situation, LR needs to see a PS installed for it to detect the Edit In PS option is possible, so if you uninstall both, then install PS, first, then LR. Of course with this release there may be some hiccup that requires installing either one or the other, again, but if you've uninstalled both and are reinstalling both, then install PS, first.

Adobe Photoshop Elements 9.0.3 Update There was an error downloading this update. Please quit and try again later. Photoshop Camera Raw 6.5 Update There was an error downloading this update. Please quit and try again later.

Adobe Photoshop Elements 9.0.3 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.5 Update
There was an error downloading this update. Please quit and try again later.

Hi,
Which operating system are you running on?
For PSE 9, the update process was best using a manual method.
Are you trying to do Help - Updates?
If so try these downloads (fand follow the manual instructions given on the pages.
Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update
Adobe - Photoshop Elements : For Windows : Camera Raw 6.5 update for Elements 9
Adobe - Photoshop Elements : For Macintosh : Adobe Photoshop Elements 9.0.3 update
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.5 update for Elements 9
If you are getting an error during the download please try a different browser.
Brian

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

Thank you for your valuable advice. I've solved the problem right now.
Thanks
2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
I have Photoshop CS 5.5 version, but I've just changed my camera and
I can't open my raw files. I need for my new camera Photoshop CC and Camera
Raw 8.7 version. How can I do to update the old version? Thank you
created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7302535#7302535>

PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get Photoshop CS3 error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Adobe Bridge at all. What am I doing wrong?

Hey,
Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs with Bridge or PS CS3.
This method wont involve any additional software purchase now.. right? Am I missing anything. here? Since my final output to my customers are JPEGs any way, wont this work? Will I be at any disadvantage. Am I missing anything. here?
From: ssprengel <[email protected]>
To: charles cash <[email protected]>
Sent: Monday, October 6, 2014 9:49 AM
Subject: PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue created by ssprengel in Adobe Camera Raw - View the full discussion
You can buy it from here:
http://creative.adobe.com/plans
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Adobe 9.03 update and photoshop camera raw 6.5 update do not load on Windows 7

I repeatedly get notified that I have an update, and I receive the following error
Adobe Photoshop Elements 9.0.3 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.5 Update
There was an error downloading this update. Please quit and try again later

You can get the updates from here:
Adobe - Photoshop Elements : For Windows

My Photoshop, Bridge, and Camera Raw in CS5 will not update. The update downloads and then says there was an error.

I am not able to update any of my CS5 files. Especially, Photoshop, Bridge, and Camera Raw.

Adobe - Photoshop : For Windows
Adobe - Photoshop : For Macintosh
Photoshop: Basic Troubleshooting steps to fix most issues
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
Operating System OSx Yosemite IMac.

What exactly does "not recognise" mean, Kathy?
You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

Camera raw 8.6 update fail and photoshop update

hi everyone
i update my photoshop and camera raw but both of them prompts failure and i cannot open my sony a7s raw to edit... is there someone encountered the same? i'm using windows 7...
thank you very much

9pines wrote:
1.— I mentioned in my original note that Help >> Check for Updates says everything is up to date on my system in both Bridge and Photoshop.
2.— Also, I mentioned that I grabbed the DNG update today. I know the webpage says it contains Camera Raw, but it doesn't. If I load a RAW image into CR, CR says it's at version 8.5.
3.—There were many other users who had this problem with 8.5, too. I beginning to think Adobe doesn't really care for users who haven't joined the CC bandwagon.
1.— That just means your install is messed up. It works on any properly maintained system I've tried so far. Is Photoshop updated to CS6 13.0.6?
2.— After downloading, did you decompress the download and mounted the .dmg file on your desktop AND ACTUALLY installed the new ACR plug-in? It DOES NOT magically get installed, you know.
3.— You are wrong. Adobe doesn't care much about any of their customers, whether subscribed to the Cash Cow or not.
4.— You are not addressing Adobe in these user forums, so drop that attitude. Your troubles are caused by user error and inexperience.

Elements 11 and camera raw update would not update - error messages

Tried to update and recieved these two error messages:
Photoshop Camera Raw 7.4 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Photoshop Camera Raw 7.4
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Just wondering if there is a problem.
tim

Delete the AAMUpdater folder. You can find the AAMUpdater folder in the following locations:
Win XP: <user>\Local Settings\Application Data\Adobe\AAMUpdater\1.0
Vista/Win 7/Win 8: <%localappdata%>\Adobe\AAMUpdater\1.0
Mac: ~/Library/Application Support/Adobe/AAMUpdater/1.0

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Lightroom3 and Camera Raw 6.1 update

Similar Messages

Maybe you are looking for