Lightscribe dvd supermultidrive/cd writer will not operate

Hi. I'm new to the forum. I have a HP Mediacenter pc 2006. For a while now, I cannot get the dvd/cd to operate.
It says that there is registry errors code 19. Does anyone know of a way to fix this. I've tried to reinstall the device drivers,but it says I have the correct drivers already. Any help would be greatly appreciated.

Hi kardash,
Thank you for the quick reply!
Based on the information you have re-posted with, I recommend following this document on Drive Cannot Write to Writable Discs (Windows Vista). If you are not able to read or play CDs/DVDs in the disc drive, please follow this document on CD/DVD Drive is not Detected (Windows Vista). This should help in finding a solution.
As for the Registry Error 19, please follow this resource on Device Manager Information for Windows Vista. This document will provide a description for the error code, as well as a suggested resolution. If you need to, you can also use this document on Downloading or Updating Software and Drivers for HP Computers.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Dvd/cd will not operate

dvd/cd will not operate. operating lion os.

What happens when you put an optical disk in the drive? Does it fail to go in, or does it go in and then get ejected? Please describe the actual failure.
Best of luck.

Any DVD I rent from the red box or at the library my 27"iMac and my MacBook Pro will not operate.

Any DVD I rent from the red box or at the library my 27"iMac and my MacBook Pro will not operate. The Mac's take the DVD's and it sounds like it's trying to run the DVD. After about 10 seconds the Mac just spits it out. I am using the newest version of the Beta Yosemite OS X 10.10.3 Version. I'm a little more than a novice user, just to keep in mind... Can anyone help me fix this problem?

Aside from running the beta (and not being allowed to discuss anything at all about it anywhere including these forums), I have found that some commercial DVDs (and actually also music CDs) are coded such that they will not play in any device that could ostensibly be used to copy the content due to DRM/copyright issues. The DVDs played just fine in both of my DVD players hooked up to my TVs and the music CDs worked in my stereo system.
Have you tried to play those in a regular DVD player?

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

HT1338 DVD drive in mac will not ply DVD's

My DVD drive in mac will not play full size DVD's,It says system extension cannot be used,please help.Thank you

Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
Try a different brand.
CDs
FUJI
TDK
Verbatim
Taiyo Yuden
DVDs
Maxell
Taiyo Yuden
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448
Cures for an uncooperative CD/DVD drive
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.

HT5287 DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?

DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?

I cannot find the eMac install disk, and I haven't been able to get it to start up from my 10.3 CDRm (holding down option or c), though I read something somewhere about these not being able to start up from system folders earlier than those they shipped with. I've dealt with this sort of thing several times before, and it always seemed to work to simply use target disk mode.
It definitely won't start up fromt the 10.5 DVD-R, and I'm pretty sure I tried putting the MBP into TM to use its optical drive as well, but it didn't work. But it's worth trying again, and I appreciate your input greatly.

I plugged my ipod into my computer to load up new tunes and it froaze on the time I dad connected it with the message 'do not disconnect' on the screen.Despite disconnecting and reconnecting it and ensuring it was charged up it will not operate. The 'lock

I plugged my ipod into my computer to load up new tunes and it froaze on the time I dad connected it with the message 'do not disconnect' on the screen. Despite disconnecting and reconnecting it and ensuring it was charged up it will not operate. The 'lock' symbol is showing at the top of the screen even when I have moved the lock switch. I have been using my ipod for several years with no similar fault. What is the problem/solution?

I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be to restore the iPod from backup

DVD Studio Pro 4 will not open after installing Leopard

I had trouble opening my film project in FCP studio 2 but resolved the problem by trashing the preferences. This did not help other programs like DVD studio pro which will not open at all or crashes as soon as it is open. It also gives me strange messages while it tries to open like" Media-application quit unexpectedly." Would re-installing help? I would have to begin with FCP studio pro and then update all the programs again. Is there an easier way to solve this problem? (Leopard is causing other programs to quit unexpectedly but I don't get messages that some part of the application has quit).

So far it seems the advice when going to Leopard is to due a total clean install of Leopard on a clean drive before installing the applications.

Touch screen will NOT operate to sync media

I have the replacement phione, but the touch screen will not operate and i have no way of syncing media - ALL pictures - to my PC. This is the SECOND replacement phone, but at least the last time it froze, I was still able to sync.
Thanks for any direction!

Thanks - that worked great. Next question - Am I able to erase all of the persoanl data from the handset? I realize everything is bacled up by Palm, but my concern is the actual handset, and if the touchscreen were to be activated again, all date is readily accessable. i would like to wipe the handset clean.
Thanks again....

Safari 5 will not operate JavaScriptCore.dll error

safari 5 will not operate due to JavaScriptCore.dll error message

JavaScriptCore.dll
You're having trouble with an Apple Application Support dll there, Sheryl.
I'd try uninstalling both Safari and Apple Application Support, then reinstalling Safari (thus reinstalling Apple Application Support). I'd also take a few extra explicit precautions along the way, just in case.
For the XP technique see the following post. (It's given for a Safari 4.0.4 problem, but the technique is the same with a 5.0.)
http://discussions.apple.com/thread.jspa?messageID=10598385&#10598385

Acrobat reader and adobe writer will not start

I bought and installed Adobe CS6 design web premium and a month after installation the Acrobat reader and writer will not start up anymore.
My OS is Windows 7 ultimate. If remove the installation and re-install it will work again but just for at about a month.

Moving this discussion to the Adobe Reader forum.

I have a DVD from The Best of Adobe Photoshop Elements, which requires Firefox 3.+ to opperate. I have down loaded Firefox 3.6, can get on lime but disc will not operate??

I was able to run the disc previously, a message came on to upgrade, I did and haven't been able to run since. I've installed Firefox 3.6b but can't get disc to operate. Message I now receive says to install 3.+, but not how.
Have not tried their web yet (next). (Adobe) www.photoshopelementsuser.com

Ok, let me try to explain step-by-step:
#The bookmarks are '''not''' in HTML file. This is OK. Firefox does not store the bookmarks in HTML format.
#Even if you boot the old Firefox, it will show the new bookmarks. This is also OK. You can't really do much about that.
#Uninstalling and re-installing Firefox will '''not''' solve your problem. Firefox will '''not''' see the bookmarks in the external hard drive. Please '''do not''' try this approach.
Now, to make things as simple as possible, let's try to bring all of your old bookmarks and settings into the new computer.
#Make sure that you have closed Firefox completely. This can be done by selecting '''File''' menu and then clicking on '''Exit'''.
#You said you were able to locate the Profile folder on the '''external hard drive''', right? Just to confirm, the name of this folder is something like xxxxxxxx.default (for example, my Profile folder is named 9qnmvkea.default. Yours will be something similar).
#Double click on this folder to open it.
#Select the '''Edit''' menu and click on '''Select All'''. Select the '''Edit''' menu again and then click on '''Copy'''.
#Now, open Firefox from your new computer and follow the instructions given in this article to locate your new Profile folder: [https://support.mozilla.com/en-US/kb/Backing+up+your+information#Locate_your_profile_folder Locate your profile folder]. Again, this folder would be named like xxxxxxxx.default
#Once this is done, again close Firefox by selecting '''File''' menu and then clicking on '''Exit'''.
#Double click on your new Profile folder to open it.
#Select the '''Edit''' menu and click on '''Paste'''. Windows will ask you if you want to replace existing files with same name. Select '''replace'''. Wait till all the files have been replaced.
#Open Firefox again from the new computer. Hopefully, you should see your old bookmarks now.

HT202731 HAVE MACBOOK AIR, purchased external DVD. Will not operate. On screen "No support disc available. ??? What am I missing????

Have Macbook Air, I purchased DVD external. Will not function, will not eject disc. On screen " no support disc." What am I missing?

Hi drhdrh,
I apologize, I'm a bit unclear on the exact nature of your configuration. If you are using an external SuperDrive with your MacBook Air, you may find the information and troubleshooting steps outlined in the following article helpful:
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Regards,
- Brenden

Hello my name is Tyesha Woods,and I have a problem with my dvd hard drive, it will not eject my cd no matter what i do can you please help me?

Hello, my name is Tyesha Woods I onw a Macbook and my dvd hard drive will not ejected my cd ,I have tryed everthing I could would you please help me?

Hi Tyesha,
Your DVD won't eject?
Restart the MacBook - as it is restarting, hold the trackpad button down. This will force it to eject. The disk should eject before you get to the login screen or desktop.

HD-DVD created with DVDSP will not use more than one subtitle track

I have made an HD-DVD with DVD Studio Pro 4.1.2, and added 4 subtitle tracks. When I play the dvd on a Toshiba A1, Apples DVD player and in the emulator I can change the subtitle track in the way that I can see the country code is changing, but no matter what it will only show me the subtitles from the first subtitle track. If I try to change the subtitle track using the remote, I can only turn the first subtitle track on and of, not switch between the different subtitle tracks. I'm a skilled dvd author, and have had several other authors look into the project finding no errors in my programming, so could this be a bug in DVD SP? Does it not allow more than one subtitle track?

Could be a bug in DVDSP. Also could be a bug in the players firmware. DVDSP never really made it has a fully functional HD DVD authoring tool.

Lightscribe dvd supermultidrive/cd writer will not operate

Similar Messages

Maybe you are looking for