Lightscribe support solutions....
Hi, I just thought I would let anyone interested know I found success in installing a Lite-On LH-20A1H 20x20 DVD+/-RW, which is a lightscribe 20X DVD burner. It went right in and then and was immediately recognized by Mac OS 10.4.8. To get the lightscribe to work I needed to install the file found at this link:
http://www.lightscribe.com/downloadSection/mac/index.aspx?id=813
You need to install it first and then install a label lightscribe label program like Lacie's Labeler program for mac found at http://www.lacie.com/support/drivers/index.htm. It it important in the installation of this program to select "Custom" install and Un-check the "Host software" module button.
I was then able to print a lightscribe DVD.
FWIW the Lite-on drive is a bit quieter than the original Sony superdrive in my Mac Pro and a whole lot faster. It ripped a cd into iTunes at an average of 37-40 X and burned a copy of a 1 hour home made DVD in my Sony in under 4 minutes using Toast 6. Very happy with the drive.
Paxx
Hi, I just thought I would let anyone interested know
I found success in installing a Lite-On LH-20A1H
20x20 DVD+/-RW, which is a lightscribe 20X DVD
burner. It went right in and then and was immediately
recognized by Mac OS 10.4.8. To get the lightscribe
to work I needed to install the file found at this
link:
http://www.lightscribe.com/downloadSection/mac/index.
spx?id=813
You need to install it first and then install a label
lightscribe label program like Lacie's Labeler
program for mac found at
http://www.lacie.com/support/drivers/index.htm. It it
important in the installation of this program to
select "Custom" install and Un-check the "Host
software" module button.
I was then able to print a lightscribe DVD.
FWIW the Lite-on drive is a bit quieter than the
original Sony superdrive in my Mac Pro and a whole
lot faster. It ripped a cd into iTunes at an average
of 37-40 X and burned a copy of a 1 hour home made
DVD in my Sony in under 4 minutes using Toast 6. Very
happy with the drive.
Paxx
I saw this on xlrR8yourmac.com right?
William
Similar Messages
-
Top Support Solutions (July 2015) for Microsoft Outlook 2013
Very helpful. I'm always getting one-off problems from users about Outlook that really have no solution, these links are the kind of problems they report to me.
Top Support Solutions for Microsoft Outlook 2013This is a collection of the top Microsoft Support solutions for the most common issues IT Pros may face when administering Microsoft Outlook 2013 (updated quarterly).1. Solutions related to sending, receiving, synchronizing, or viewing email:Fix sending or receiving problems in Outlook by using the Office Configuration Analyzer ToolOnly a subset of your Exchange mailbox items are synchronized in Outlook 2013Sync Issues folder for Outlook contains warnings such as "Synchronization of some deletions failed"2. Solutions related to a crash while using Outlook:How to resolve crash and stability issues in Office programs by using the OffCAT toolHow to troubleshoot crashes in Outlook 2010 and Outlook 2013Outlook 2013 keeps crashing - Microsoft CommunityOutlook not responding, stopped working,...
This topic first appeared in the Spiceworks Community -
Unable to run HP Support Solutions Framework
I am trying to run the HP Support Solutions Framework Window 8.1. Windows can't configure faiiled to start. Verify that you have sufficient priviledges to start system services. I am already an Administrator. Please help.
Hello @Betwina,
I understand that you are having issues with the HP Support Framework. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number if your computer is a Notebook.
Notebook - How Do I Find My Model Number or Product Number?
If however your computer is a Desktop. I am linking an HP Support document below that will show you how to find your product number for a Desktop computer.
Desktop - How Do I Find My Model Number or Product Number?
With this I can provide you with accurate information.
As well if you could explain what it is that you are trying to do I will endeavor to help you where and how I can.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
New Top Support Solutions blog
Hello
As part of our efforts to keep our communities informed about the most relevant content that address the top questions that we are getting in out forums and other support channels we want to introduce the new “Top Solution Content” blog (http://blogs.technet.com/b/topsupportsolutions).
In this blog you will find up-to-date and valuable information about Microsoft top support solutions for several of our popular products in the Server and Tools portfolio. You can use the tags (http://blogs.technet.com/b/topsupportsolutions/archive/tags)
to easily locate the product of your preference or visit the home page to see what’s going on for the different Microsoft Enterprise and developer products. As a blog you can also subscribe to post and comments using the RSS feeds.
We hope this will reduce time and effort when you are looking for relevant content. Enjoy it!
Thanks
Microsoft Support teamThanks
Qiao Wei !!!
good support...
Vote me, if its helps you. Regards, Tamilarasi. -
HP support solutions Framework
Help!! I installed Win 10 and my Officejet J4550 all-in-one no longer worked. I gave up and went back to Win 7 but now those printer files are correcpted. I think the main problem is the "HP support solutions Framework". For some reason I can't uninstall it or re-install it. Can you help?thanks,Ron [email protected]
erico:
Sorry, but I'm confused. I have the HP Support Asst, use it regularly, and it works fine. My problem is with the HP Support Solutions Framework. Will down loading Suppoft Asst again resolve that issue?
(I know enough about computing to get around but far from truly literate so pleae forgive if that's a dumb question.)
Thnks for your help. -
Hp support solutions framework + How do I uninstall?
hp support solutions framework + How do I uninstall? It will not uninstall
Hi lbjr, and welcome to the HP Forums! I see that you are having a problem uninstalling the HP Support Solutions Framework. I will try my best to help you resolve this issue.To better guide you, could you please tell me the model number of your computer and the operating system that is running on it. Here are some guides for How Do I Find My Model Number or Product Number? and Which Windows operating system am I running?. I want you to be aware of what the HP Software Framework provides. It is a common set of software interfaces that centralize and simplify access to hardware, BIOS, and HP specific drivers that work with the Microsoft Windows Operating Systems. (Notes from Should I Remove It?) You should be able to uninstall HP Software Framework from your computer by using the Add/Remove Program feature in the Window's Control Panel. On the Start menu (for Windows 8, right-click the screen's bottom-left corner), click Control Panel, and then, under Programs, do one of the following: Windows Vista/7/8: Click Uninstall a Program. Windows XP: Click Add or Remove Programs.When you find the program HP Software Framework, click it, and then do one of the following: Windows Vista/7/8: Click Uninstall. Windows XP: Click the Remove or Change/Remove tab (to the right of the program).Follow the prompts. A progress bar shows you how long it will take to remove HP Software Framework.I hope this helps, please let me know how it goes. Thank you and have a great day!
-
What is the E2E application management support ?
is this a special kind of support provided directly by SAP to customers ? meaning SAP support
How is it different from the support we normally do in our organization using solution manager ?Hi, I just thought I would let anyone interested know
I found success in installing a Lite-On LH-20A1H
20x20 DVD+/-RW, which is a lightscribe 20X DVD
burner. It went right in and then and was immediately
recognized by Mac OS 10.4.8. To get the lightscribe
to work I needed to install the file found at this
link:
http://www.lightscribe.com/downloadSection/mac/index.
spx?id=813
You need to install it first and then install a label
lightscribe label program like Lacie's Labeler
program for mac found at
http://www.lacie.com/support/drivers/index.htm. It it
important in the installation of this program to
select "Custom" install and Un-check the "Host
software" module button.
I was then able to print a lightscribe DVD.
FWIW the Lite-on drive is a bit quieter than the
original Sony superdrive in my Mac Pro and a whole
lot faster. It ripped a cd into iTunes at an average
of 37-40 X and burned a copy of a 1 hour home made
DVD in my Sony in under 4 minutes using Toast 6. Very
happy with the drive.
Paxx
I saw this on xlrR8yourmac.com right?
William -
Can somebody recommend a remote desktop support solution?
I am looking for a remote desktop solution to support our remote office(s) Mac systems. Apple Remote Desktop is not an option. All versions of VNC that we have tried will not work with Mac Lion. Bomgar has been ruled out because of finances.
Anybody have other suggestions?Normally I would suggest TeamViewer.com, but you are talking a commercial situation which should be paid for, and you mentioned financial issues.
I do not understand the VNC not working, as I've used Screen Sharing (just Apple wrapped VNC) both to and from Lion to other Macs.
Can you please describe the configuration information
What VNC clients? (Mac OS X Screen Sharing, Chicken (or Chicken of the VNC), JollysFastVNC, TightVNC, UltraVNC, RealVNC, other...)
What VNC server? (Screen Sharing, Remote Desktop, Vine Server, other...)
What computer is trying to connect to the remote offices? Is it a Mac or other
What operating system version (is this the Lion system?)
What is the office Mac? Is that the Lion system?
What do you have as a router at work?
Can you configure your work router to allow VNC ports 5900, 5901, 5902, ... through your router and vector the different port numbers to specific Office Macs? <http://portforward.com>
Have you tried Mac OS X Screen Sharing? On the Office Mac you enable System Preferences -> Sharing -> Screen Sharing (optionally, you can enable a VNC password for non-Mac clients). On the Mac client, you use Finder -> Go -> Connect to server -> vnc://address.of.office.router:5903 which would connect to port 5903 on the office router which you would have previously port forwarded to a specific office Mac.
If you are in the office, then you should see the Mac via bonjour in your Finder side-bar or via Finder -> Go -> Connector to server -> Browser
Anyway
No-IP.com or DynDNS.org can provide a dynamic DNS name to make finding your office router easier. -
Looking for an unattended over the internet remote support solution
Did you look into ScreenConnect?
Hello everyone... I've read some discussions today regarding remote support tools. My background comes from an older version of Kaseya (perhaps 5 or earlier), some experience with GFIMax, and Bomgar. I have changed jobs and am looking for a similar solution for the company I am at to replace the current Kaseya implementation being managed by a vendor. We have less than 15 workstations/servers to maintain. I took a look at Remote Utilities this afternoon as well as DameWare and while I lean more towards DameWare, they do not support unattended remote access at this time. Remote Utilities looks like a good solution provided I install an RU server somewhere in the building. I was looking for a solution similar to Kaseya or GFI whereby there is a cloud based console that the agents check in to that I have access to from anywhere.Are there...
This topic first appeared in the Spiceworks Community -
Applications launch in trial mode - online support solution failed
Hi everyone, has anyone had the same problem? Online solution advises to download new Adobe Application Manager and follow a series of steps to effectively renew. Downloaded successfully and when I ran it it returned an error window stating the application manager failed to initialise and directed me to try a solution - a link which took me to a redundant Adobe support page. i previously had a trial version with different email address. Adobe prompts me to log in using it, which may be something to do with the problem, even though i don't and always log in with my subscription email address. Thx AT
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html
or
This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
A driver supporting solution menu ex is not installed
I have a CanoScan LiDE 210 that I've been using for the last two years at least. I recently used it about a week ago and had no issues with it. For some reason when I tried using it today through MP Navigator and Solution Menu it doesn't work. I get an error from Solution Menu where only the help features are available to be clicked and from MP Navigator it tells me that it cannot start. I have tried reinstallation and even the driver update available from your site. I'm not sure what the issue coudl be anymore. I know it can start and the bulb works fine because when I plut the usb in my computer recognizes it and for a short while the scanner will light up, but that is all.
I'd appreciate any and all help.Having searched this issue on the internet I now believe this is around for long time and still unresolved.I wonder how much responsible is a company like Canon in resolving this. A multibilion dollar comapany and iresponsive. I was thinking my next stop to be for a Canon multifuncion printer after my 18 years HP started showing problems but now I am very skeptical. Seen Canon as incompetent as this I have to think twice before I buy another Canon product. (so far I bough three Cannon scanners and this is a big problem for me. I guess Cannon will suggesst to call their technical support (for a fee likely) and this for what purpose? The fee will cost more than teh product an dif their techical people know the solution to tell me then why not fixing it in teh first place? For a problem that they know for long time and they do nothing to fix it they want to charge? Their error message says there is a driver not installed. OK Canon. Be more specific. YOur error message is ho help. It is simply useless. Tell me which driver is not installed and I'll do the rest.
-
Multi 8x DVD R/RW double layer support?
I'm a new computer owner with an inherited Presario CQ50-115NR. Please tell me if the Optiarc DVD RW AD-7580 S with FH-02 revision (or, as it was described in the ad, Super Multi 8x DVD R/RW with Double Layer Support) can play and record CDs, too? Thank you.
Your notebook does have a lightscribe supported DVD drive (LightScribe SuperMulti 8X DVD±R/RW with Double Layer Support). You can validate that from specs on the website over here
There is another way to check that. Slimline drives may not have enough space for a LightScribe logo on the drive tray cover, but a LightScribe logo sticker should be affixed to all LightScribe-enabled notebooks. To make sure, the presence of the disc encoder sensor can verify that a drive is LightScribe-enabled. Looking straight down on the spindle after the drive tray is opened, then look for presence of a LightScribe disc encoder sensor as an indicator of LightScribe capability.
Run the fixit from microsoft to fix dvd drive problems you are facing on the notebook.
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Lightscribe - System 7 - SATA drive
Why doesn't Lightscribe support System 7 with a SATA DVD?
The few people who have been able to make it work had to modify their registry.System 7?
Do you mean Mac OS7 or the British band called System 7?
If you mean Windows 7, you might want to check the LightScrribe website for the update to LightScribe .
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Enterprise Portal monitoring with Solution Manager
Dear guru's,
I have just installed a SAP Solution Manager 4.0
I would like to monitor a Enterprise Portal SP15.
Does someone have a walkthrough for this because very little information can be found on the sap help pages.
I'm interested in user/memory/iview statistics etc.
Hopefully someone of you has experience in this.
I would appreciate it alot.
Thank you
Kind Regards,
BudHi Bud,
I've found useful docs here:
https://websmp109.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001908512005E
and.
http://service.sap.com/nw04operation
-->Supportability --Solution Manager Diagnostics - Setup Guide SP Stack 16
bet regards
Wolfgang -
I have a new mac Book. I want to put my previously purchased itunes on it. The support page says to authorise the new Mac by going into the itunes store and then authorise. I click on store and all I get are products with no link. Can someone advise where the authroisation link is please?
I don't know why but after about an hour the tool bar you rferred to came on its self jsut as the support solution and you have advised and it is now working, but the toolbar just disappears and that is why I could not find the link or correct store link. Weird! But thanks, Gordon
Maybe you are looking for
-
Is the iPhoto Library Safe?
I currently have my iPhoto library and separate copies of the photos. As this is doubling up on everything, I was wondering how safe the iPhoto library actually is? Is total corruption possible and then if I didn't have separate files elsewhere all w
-
Perfomancy reports in BI statistics
I need to create some specific reports using the BI Statistics 7.0 infocubes. I need the runtime (average front-end, manager data and OLAP) of a specific report for a specific period. And the usage (how many times a query is used, and how many naviga
-
Setting Application Context Attributes for Enterprise Users Based on Roles
Hello, We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Pri
-
I was perusing my music selections in my itunes account, clearing out useless stuff I don't listen to, and under "My device," under the "music" tab, in "Artists," i happened upon what is an artist's name (or a place holder for an artist's name writte
-
I would llike to add as slideshow that opens up automatically when the user gets to the page and also,that loops indefinately. I tried making a SWF file from Image Ready, but it ended up being Soooooo heavy!!...22 mo for only 6 photos!?? I looked up