Like, " Epson Stylus 400"

Hi everybody,
Like, " Epson Stylus 400".
I have one for 20 years but there is no pilot for Vista and "modern" OS.
Some features dont work after window 98.
On the other hand my graphic card is dying on my old asus computer wich I kept just to run that printer.
My main problem is, will I be able to refill my ink myself or did they found a trick so I cant ;-)
I am looking for an inkjet printer, not a professionnal one but preferably one that can print at least 11 inches by 14 inches ...
Is there pros and cons about laser printer and inkjet?
You can estimate my needs by the printer I used up to now. I draw a skecth. I scan and clean it on photoshop, put some color, etc.
Then I print it and put colored pencil or watercolor on it.
I am thinking abouot spending between 150 and 200 dollars on a printer on sale.
Well, you may laught. It is not a troll.
JP

Update or reinstall the EPSON software.

Similar Messages

Printing in LR4: what printer profile must be use when using an Epson Stylus Pro3800?

Please help. Thank you.

The printer profile should be something like <Epson Stylus 3800 Epson Ultra Photo Paper Luster>; in other words the profile has to be specific for your printer AND the paper you are using for this specific print.
Your printer came with several profiles for Epson paper. If the paper you are using is not among them, or if you are using a non-Epson paper, you have to download the icc profile for this paper from the paper manufacturer's website, and after downloading it you have to install it. Some profiles are compressed files; these have to be un-compressed (un-ZIPPed) before installation.

Using iMac, Aperture 3, and & Epson Stylus Photo R1800 printer: How come my prints look like trash?

I have calibrated my iMac Intel Core i3 and printing through Aperture 3 with an Epson Stylus Photo R1800 is not producing great results. Cyan is dominating along with blue lines through the grass in the picture. I figure the lines are a result of clogged head...but the fact the prints are not close to the image on the screen is alarming. HELP!!!

SFSteinie,
There is an Aperture forum, I'd recommend reposting there and perhaps another R I 1800 users has some insight you may not know about.

Epson Stylus Pro 7700 will not work after installing Mountain Lion, I have update all drivers and firmware

This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?

Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website?

Print quality on Epson Stylus Photo R800

Hi...
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years.
I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy.
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Does anyone have similar problems or (even better) a hint to a solution?
Note,
When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
Thanks!
Erik.

Sorry for calling you 'Frank' Frans...
Vriendelijke groet,
Erik Henken.
Op 3 jan. 2012 om 20:23 heeft "c.frans w" <[email protected]> het volgende geschreven:
Re: Print quality on Epson Stylus Photo R800
created by c.frans w in Photoshop Lightroom - View the full discussion
I would shine some light on your remark:
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom...
My name is :
Frans
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116097#4116097
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116097#4116097. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I connect an Epson stylus SX235W to my iPad

I can connect to my laptop but cant get my iPod to connect with the Epson stylus SX235W to my iPad any help would be appreciated, I am a very new user with little IT experience

Your printer is not on the list of AirPrint devices, so you will need to visit the app store for an app from epson, or a third party app like print and share to reroute your print jobs thru your laptop.
http://support.apple.com/kb/ht4356

Can't scan with Epson Stylus DX4450

Hi everybody.
I'm trying to configure my Epson Stylus DX4450. Printing works like a charm, but scanner is not. I tried to configure it as it was suggested on various websites. I've installed sane, xsane, iscan (from http://repo.archlinux.fr/i686) also I've downloaded iscan-plugin-cx4400 from Avasys website, extracted it with rpmextract ant put the library to /usr/lib/iscan.
When I try sane-find-scanner it shows:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:002:010
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
When I try scanimage -L it's idle for about a minute and then it shows:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
But when I try it again it shows:
device `epkowa:libusb:002:010' is a Epson flatbed scanner
Then if I try sane-find-scanner again it will show no language errors:
found USB scanner (vendor=0x04b8, product=0x083f) at libusb:002:010
xsane will check for available devices for some time, then it shows a message, that no device is available. iscan shows a message "Could not send command to scanner. Check the scanners status". Sometimes iscan will launch, but I can't scan, because it will show me the "Could not send..." error message.
Device usually turns off when I try xsane. Two times xsane launched, but Epson turned off right after it. It also turns off sometimes when I try sane-find-scanner second time or when I try to launch iscan.
I read that there can be a conflict between sane and gphoto, moved /etc/udev/rules/54-gphoto.rules and restarted udev - still didn't work.
/etc/sane.d/dll.conf:
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
#canon_pp
cardscan
coolscan
coolscan2
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
#epson2
epkowa
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
hp_rts88xx
#hpaio
/etc/sane.d/epkowa.conf:
# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004 Olaf Meeuwissen
# See sane-epkowa(5), sane-scsi(5) and sane-usb(5) for details.
# SCSI scanners can be configured simply by listing the path to the
# device. For example, if your system claims to have a /dev/scanner
# SCSI device, all you have to do is uncomment the following line:
#/dev/scanner
# In the interest of maintainability, most installations would have
# /dev/scanner sym-linked to the real SCSI scanner device node.
# An alternative way that works for many operating systems and is a
# little bit more generic, is to have the backend probe for your SCSI
# scanner with the following configuration command:
#scsi EPSON
# On systems with libusb, the following line is sufficient to get the
# backend to recognise your USB scanners. It presumes, however, that
# the scanner---more precisely, it's USB product ID---is known to the
# backend.
# For all USB scanners that are officially supported by this backend,
# this presumption is true. A list of such scanners can be found in
# sane-epkowa(5).
usb 0x4b8 0x83f
# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
# usb <USB vendor ID> <USB product ID>
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order
# to find the USB product ID, use lsusb(1) or, on Linux systems, peek
# at the information in /proc/bus/usb/devices.
# A sample configuration for the Perfection 1650 (GT-8200), which has
# a product ID of 0x0110, would look as follows:
#usb 0x04b8 0x0110
# When not accessing your USB scanner via libusb, you may need to use
# one of the configuration commands below or commands that are almost
# the same. These commands typically access the scanner via a kernel
# scanner module.
usb /dev/usb/scanner0
usb /dev/usbscanner0
usb /dev/uscanner0
# Linux had a scanner module until version 2.6.2. As of version 2.6.3
# libusb is your only option. Linux' scanner module can be loaded via
# the modprobe(8) command like so:
# modprobe scanner vendor=<USB vendor ID> product=<USB product ID>
# If the scanner module already knows the vendor and product IDs, you
# do not have to specify them. If you want to have this done automa-
# tically every time you boot, you can add the above line, except for
# the modprobe command itself, to your /etc/modules file.
# Although not tested with this backend, parallel port scanners should
# be usable. You can configure them as shown below, but I do not know
# much about the details. Information is welcome.
#pio 0x278
#pio 0x378
#pio 0x3BC
/etc/udev/rules.d/53-sane.rules (shortened):
# This file was automatically created based on description files (*.desc)
# by sane-desc 3.3 from sane-backends 1.0.19 on Fri Mar 7 06:29:43 2008
# udev rules file for supported USB devices
# To add a USB device, add a rule to the list below between the
# LABEL="libsane_rules_begin" and LABEL="libsane_rules_end" lines.
# To run a script when your device is plugged in, add RUN+="/path/to/script"
# to the appropriate rule.
# The following list already contains a lot of scanners. If your scanner
# isn't mentioned there, add it as explained above and mail the entry to
# the sane-devel mailing list ([email protected]).
ACTION!="add", GOTO="libsane_rules_end"
ENV{DEVTYPE}=="usb_device", GOTO="libsane_create_usb_dev"
SUBSYSTEM=="usb_device", GOTO="libsane_rules_begin"
SUBSYSTEM!="usb_device", GOTO="libsane_rules_end"
# Kernel >= 2.6.22 jumps here
LABEL="libsane_create_usb_dev"
# For Linux >= 2.6.22 without CONFIG_USB_DEVICE_CLASS=y
# If the following rule does not exist on your system yet, uncomment it
# ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664", OWNER="root", GROUP="root"
# Kernel < 2.6.22 jumps here
LABEL="libsane_rules_begin"
# EPSON Stylus CX4300 | EPSON Stylus CX4400 | EPSON Stylus CX5500
# EPSON Stylus CX5600 | EPSON Stylus DX4400 | Epson Stylus DX4450
ATTRS{idVendor}=="04b8", ATTRS{idProduct}=="083f", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
# The following rule will disable USB autosuspend for the device
ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"
LABEL="libsane_rules_end"
Can anyone help with this?

Almost solved.
First I've copied files extracted from iscan-plugin-cx4400.rpm from /usr/lib/iscan to /usr/lib/sane. Didn't work.
Then I've checked version of iscan with yaourt and it appeared that aur have newer version than the one from archlinux.fr repo. I've built it, moved epkowa.conf.pacsave to epkowa.conf and it worked once.
sane-find-scanner output was the same, with language errors, but scanimage -L showed that it found my scanner (don't have the exact output - it was different than before). xsane still didn't found the device but I managed to preview and scan to file printer test page with iscan.
When I tried it for the second time, sane-find-scanner output was the same, but scanimage -L didn't recognised the scanner. iscan didn't work. Tried to restart the device - still the same.
Tried to turn off the scanner, restart udev, start scanner again. Didn't work.

HT3669 What about Epson Stylus C42?!

I can't locate a download for my old, but good, Epson Stylus C42. It's not on the Apple List, but also not on the list of drivers not available. Am I missing something or just need to give up and get a new printer? Thanks!

Based on the page below, it looks like Epson stopped supporting this printer for the Mac a long time ago.
Given that, and given Apple's lack of support, I suspect it's time ... as you suggest.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14403&prodoid=21643927&infoType=Downloads&detected=yes&platform=OSF_M_X8

Printing to my Epson Stylus Pro 3800 (Grr...)

Hi All,
I'm a fairly recent convert from Windows and I LOVE my Mac for everything EXCEPT printing to my 3800.
I have always had a problem with my Epson Stylus Pro 3800 printer on my Mac. The two just don't seem to get along. I've wasted countless pages of expensive paper and what seems like gallons of ink trying to resolve this issue, but I'm getting nowhere. I've ruled out physical problems with the printer - it works flawlessly on the three PC's I've connected to it (via usb).
Until this evening I was using the Epson drivers for this printer. They were flakey at best. I would get random 'communication errors' that could happen at any time during a print - start, end, somewhere in between or, if I was lucky, not at all. Having had enough I went looking for a solution (again) online tonight and stumbled across Gutenprint 5.2.6.
I've been able to install the drivers successfully by following the documentation but I can't get the printer to print via USB or IPP. Using usb, I get a message in the print queue 'backend USB Failed' and the printer goes into a Paused state. Using IPP the print job apprers to spool and queue reads 'Connecting to printer... ' for a while then returns with 'Unable to connect to printer; will retry in 30 seconds..'.
I believe the IPP is failing because the print queue options in the Gutenprint setup. The install says to leave Queue blank for the default queue. I tried that - it didn't print.
I browsed to the embedded 'EpsonNet Config' page in the printer and named what they call 'printer name' as printer. I presume that's the queue that the gutenprint driver wants, but I still get the same result.
When I look at EpsonNet Config, the IPP URL is http://192.168.9.166:631/printer.
When I look at the Printer Setup on the Mac, I see
Queue Name: 192_168_0166
Driver Version: 5.2.6
URL: ipp://192.168.0.166/printer
Can someone tell me what I'm doing wrong? I'm frustrated beyond belief with this problem and really could use some help using either the Epson drivers or Gutenprint drivers - I just want some consistent output.
Thanks in advance for any clues you may be able to offer.

I have been using an Epson 3800 with my I Mac for four years and up untill I upgraded to OSX Lion the only problem I had was colour issues associated with some ICC profiles. After upgrading to Lion and downloading the latest OSX update (10th May) I could not print.
One of the problms was that the print settings continuously defaulted to:
Page Setup: Sheet Feeder
Media Type: Ultra Premium Photo Paper Luster
I would change the settings to what I wanted, I saved them selected Print. My printer promptly started changing from Matte ink (what I had set my print setting s for) to Photo Black.
After trying all i could to correct this. I finally gave up and rang the Epson Helpline. After 3 telephone calls over a day and a half during which I was talked through the procedure you described, the problems were still not resolved.
My contact on the Epson Helpline then tried to simulate the problem on his MAC. He discovered that he had the same problem the print settings would not save, albeit on a Epson 3880 driver. He then advised me that the problem was not with thw Epson Drivers it was a MAC/Apple problem.
I then rang the Apple Helpline (at £1.35 a minute) described the problem and was eventually put through to a supervisor. Who asked me to send her a set of screen shots describing the problem, This I have done, I have received an acknowledgement of receipt and have been advised that I should get a response within two working days.
I am waiting hopefully.
I have tried to print both via CS5 and Aperture the problem is the same in both instances.

How do I turn off color management in my Epson Stylus Photo R1900

How do I turn off color management in my Epson Stylus Photo R1900 printer? I am using the laetest Epson driver, I am using Adobe Photoshop CS5 and I'm using OSX 10.5.8.
Thanks
Joe

I have researched the matter a lot and I,
along with many others, still have problems with this complicated
subject.
Color management is as simple in theory as Honoring a Source Profile and CONVERTING it to a Target Profile (monitor or printer) for Proofing.
But yes, we work at the mercy of the rocket scientists who try to dumb an extremely complicated process down so regular folks (like me) can make it work — trouble is I think their approach needs a bit more distilling and common sense sometimes...but it is very doable once you put in the time to figure it out, just follow the CHAIN in your workflow if you're still having problems.
If you want a "simple button" try staying in sRGB and printing out of Apple Preview app using OEM standard papers matched to your printer and OEM ink set.

Epson Stylus Photo 1290 - how do I remove items from the print queue?

Description of problem with "Epson Stylus Photo 1290" Application:
After selecting Show Completed Jobs from the main menu (Jobs > Hide/Show Completed Jobs) I am presented with a status list of print jobs (a.k.a. "print queue") that are either marked as "Completed", "Cancelled", "On Hold", "Printing" etc. Each and every time I print an item it is added to this list.
I simply want to clear this list.
However, the application's "Delete" button appears to only transform a "Printing" job to a "Cancelled" job, for example.
So how on earth do I clear the old (and, to me, useless) jobs listed in this print queue?
I know this isn't apple software but seeking help on the EPSON sites (and the rest of the net) has led me nowhere.
Many many thanks in advance if anyone can suggest anything!
My set-up:
Hardware:
Model Identifier: MacBookPro5,1
Boot ROM Version: MBP51.007E.B05
SMC Version (system): 1.33f8
Running: OS X 10.5.8
Problem App: EPSON Stylus Photo 1290.app, version 6.0.3
Queue name: EPSONStylus_Photo1290
Host name: localhost
Driver version: 3.09 (confirmed as latest)
URL: usb://EPSON/Stylus%20Photo%201290?serial=WORLL0112061542320
Have print log files been cleared: Yes (using MacPilot)
Have print preferences been trashed/reset: Yes (all that I could find)
When did this problem start: not sure, I first noticed it several months after first using it on my MBP 10.5.x

Hmmmm. Doesn't look like I can edit my post. Okay.......
Contrary to what I've said above, this IS an Apple issue as the problem lies in the Print Queue, which is part of the OS.
The "fix" is to go System Preferences > Print & Fax and then delete the 1290 from the list of printers.
When the 1290 printer is re-added its print queue is now empty AND the Delete button does as it is supposed to do - it deletes items from the queue list.
Hooray!

Epson Stylus Photo RX680 with Bluetooth Photo Print Adapter 2 won't pair

This post describes my problem, but I couldn't reply since it has been archived:
http://discussions.apple.com/thread.jspa?messageID=7882399&#7882399
I am having the same issue with an Epson Stylus Photo RX680 and their Bluetooth Photo Print Adapter 2. I go to System Preferences -> Bluetooth -> Set Up New Device, click Continue, select Printer, and click Continue. At this point, the Bluetooth Setup Assistant sends me to the Print & Fax System Preferences window. I can add the printer under the Bluetooth heading. It finds the drivers and adds the printer to my printers list, but a test page (or anything else) won't print. The job is added to the queue, but it stops trying to print after a few seconds. If I go to the Bluetooth System Preferences, I can see the printer listed (for a while), and I notice that it is connected but not paired.
If I run the Bluetooth Setup Assistant and select Any Device instead of Printer, I see the printer in the list and can view the Passkey options. It is set to "Use a specific passkey", which is what I need. I have tried changing it to a different option and then changing it back, but it does not seem like this has an effect on how the printer is paired. I have never been asked for a passkey when attempting to add this printer, and I suspect that this is why I cannot print to it.
I have also tried enabling and disabling Bluetooth sharing, and this does not seem to have an effect, whether "require pairing" is checked or not. Isn't there some place where I can choose "Pair this device" once it has been discovered? I find it strange that I can connect to it but have no option to pair afterward (at least that I can find). To make the matter more complicated, the printer disappears from the device list in the Bluetooth System Preferences after about 30 seconds, so I have to remove the printer and reinstall it in order to see the it in the list again.
I am able to print to this printer using bluetooth from a Windows XP machine, so I don't think that there is a problem with the adapter. I am also able to print to this printer using USB, so I don't think that there is a driver problem. I believe (though I certainly could be wrong) that the issue is that the device is not paired. Can anybody help?
Thank you.
-Kyle

I was trying to find a way to use the Epson drivers because the Gutenprint drivers don't support duplexing or feeding out of the front tray on this printer, but at least this got bluetooth printing working. I downloaded the latest Gutenprint drivers (5.2.2), ran the uninstall program first to get rid of the old drivers, and then installed the new ones. I added the printer through the bluetooth heading in the Add Printer dialog, and I selected the RX680 Gutenprint driver (which was not available with the default OS X 10.5.5 installation). Once again, the printer showed up as connected but not paired in the Bluetooth System Preferences, and it disappeared from the device list after a few seconds, but printing works now. The print quality for this printer is much improved by the new drivers as well.
Bluetooth setup is mentioned in the user documentation. It's kind of a joke:
Macintosh computer: Double-click Bluetooth File Exchange in your Utilities folder and follow the on-screen instructions.
That's it. I have been disappointed with this printer on a number of occasions. If you are going to connect directly through USB, then it's probably fine. If you want to use any form of network connectivity, you had better be running Windows on any machine involved.
I'll talk with Epson support to see if I can get any further with their drivers. Since it's supposed to work, I'd like to see if I can get it to happen. Otherwise, I'll return the adapter and share the printer through a spare desktop.

Epson Stylus 9600 and ColorSync

Printing problem with Epson Stylus 9600 printer and Photoshop CS:
When I choose Print Settings from Media Type -menu for example, Glossy paper does not exist. When I choose Print with Preview from Photoshop, they do show up.
ColorSync Utility shows profiles are correctly installed (they show up under Installed ColorSync profiles). When I choose Registeted ColorSync devices in ColorSync Utility they do not show up.
The printer driver has been downloaded from EPSON web page, it is not the build-in GIMP-Print driver. I have tried to re-install it but without luck.
Any ideas why Epson driver behaves like this?

There is a good chance that if you downloaded from there site and it went to your desktop and you opened it it didn't work.
If you download from there site and it goes to your desktop you must Click on Mac HD and then Applications and then drag and drop it in The Epson Printer Setup folder before you open it.
Unless it downloads directly to the Epson Folder...Don

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

Printing from iPhoto 08 on Printer Epson Stylus Photos Rx 500?

Up to before I purchase a new 20" Mac OSX 1.5 Leopard from Tiger X 1.4.9 I had no problems printing on my Epson Stylus Photo RX500, but, even after having a new driver for Epson,the printing is a "****", I no longer have, as before the ability to chose the quality of print which I desire, I mean the best rendition for subject which I photographed, like Portraits, I no longer can control the printing speed as I used to before (for qualities) and am left with photos with lines, no matter what I do. I wasted 2 sets of ink cartridges, and lots of papers to try to circumvent the problem, to no avail. Sometimes using mat paper works well, glossy no.
Cam I have some help ? Tanks.

I had the same problem. The new driver I downloaded never worked properly. I ended up buying a new printer. I still use my Epson to scan with no problem. I actually need a part for my Epson RX 500 if you'd be willing to part with your scanner lid for a price. [email protected]

Like, " Epson Stylus 400"

Similar Messages

Maybe you are looking for