Like operator
Hi
how i can give cursor variable in LIKE operator
say for example in my pl/sql
select card_number into v_card_number
from card where card_number LIKE (here i want to give a cursor value)
thanks in advance
from card where card_number LIKE (here i want to give a cursor value)Not much info here. Do you mean a literal value or a CURSOR? Assuming your CURSOR is a pre-defined select statement, you can just use it like this.
with mycursor as
(select 'MANAGER' val from dual
union all
select 'ANALYST' from dual)
select * from emp, mycursor
where job like '%' ||mycursor.val || '%'
Similar Messages
-
Can I use a LIKE operator in an IF statement in a column formula
This is what I have so far.
CASE WHEN Opportunity."Sales Type" LIKE '*New Acct' THEN 'Sale to NEW Customer' END
I want to display 'Sale to NEW Customer' if opportunity type contains the terms New Acct.Try this:
CASE WHEN Opportunity."Sales Type" LIKE '%New Acct' THEN 'Sale to NEW Customer' END
The LIKE operator requires a % wildcard rather than the * wildcard.
Mike L. -
Why the 'LIKE' operator takes so much time to run?
I have a table T with 3 columns and 3 indexes:
CREATE TABLE T
id VARCHAR2(38) NOT NULL,
fid VARCHAR2(38) NOT NULL,
val NVARCHAR2(2000) NOT NULL
ALTER TABLE T ADD (CONSTRAINT pk_t PRIMARY KEY (id,fid));
CREATE INDEX t_fid ON T(fid);
CREATE INDEX t_val ON T(val);
Then I have the following two queries which differ in only one place - the 1st one uses the '=' operator whereas the 2nd uses 'LIKE'. Both queries have the identical execution plan and return one identical row. However, the 1st query takes almost 0 second to execute, and the 2nd one takes more than 12 seconds, on a pretty beefy machine. I had played with the target text, like placing '%' here and/or there, and observed the similar timing every time.
So I am wondering what I should change to make the 'LIKE' operator run as fast as the '=' operator. I know CONTEXT/CATALOG index is a viable approach, but I am just trying to find out if there is a simpler alternative, such as a better use of the index t_val.
1) Query with '=' operator
SELECT id
FROM T
WHERE fid = '{999AE6E4-1ED9-459B-9BB0-45C913668C8C}'
AND val = '3504038055275883124';
2) Query with 'LIKE' operator
SELECT id
FROM T
WHERE fid = '{999AE6E4-1ED9-459B-9BB0-45C913668C8C}'
AND val LIKE '3504038055275883124';
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=1 Card=1 Bytes=99)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=1 Card=1 Bytes=99)
2 1 INDEX (RANGE SCAN) OF 'T_VAL' (NON-UNIQUE) (Cost=4 Card=12)I will for sure try to change the order of the PK and see whether there will be any impact to the performance.
In our application, val is much closer to a unique value than fid. In the example query, the execution plan showed that the index on val was indeed used in the execution of the query. That's why the 1st query took almost no time to return (our table T has more than 6 million rows).
I was hoping the 'LIKE' operator would utilize the t_val index effectively and provide similar performance to the '=' operator. But apparently that's not the case, or needs some tricks. -
Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.SDear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath -
hi Experts,
while running SQL Query i am getting an error as
The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
T2.LineText
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,T2.LineText
how to resolve the issueDear Meghanath,
Please use the following query, Hope your purpose will serve.
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
CAST(T2.LineText as nvarchar (MAX))[LineText]
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry --where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,CAST(T2.LineText as nvarchar (MAX))
Regards,
Amit -
We have a simple select query which is using the 'Like' operator on a char(4) column.
In a oracle windows environment when we have a query such as:
select col1, col2, col3
from table1
where col1 like 'AB'
it returns everything which is = to 'AB' and doesn't seem to be including the trailing 2 spaces as would be stored becasue the column is char(4)
In a oracle unix environment when we the same query:
select col1, col2, col3
from table1
where col1 like 'AB'
it returns nothing...
It appears as if the version running on a windows environment is truncating the trailing 2 spaces when using the like expression but in a unix environment, it is not. Does anybody have any idea or clue what could be occuring or if there is some database setting which could cause this to occur?Quote from Oracle Doc:
Character Values
Character values are compared using one of these comparison rules:
Blank-padded comparison semantics
Nonpadded comparison semantics
The following sections explain these comparison semantics.
Blank-Padded Comparison Semantics If the two values have different lengths, then Oracle first adds blanks to the end of the shorter one so their lengths are equal. Oracle then compares the values character by character up to the first character that differs. The value with the greater character in the first differing position is considered greater. If two values have no differing characters, then they are considered equal. This rule means that two values are equal if they differ only in the number of trailing blanks. Oracle uses blank-padded comparison semantics only when both values in the comparison are either expressions of datatype CHAR, NCHAR, text literals, or values returned by the USER function.
Nonpadded Comparison Semantics Oracle compares two values character by character up to the first character that differs. The value with the greater character in that position is considered greater. If two values of different length are identical up to the end of the shorter one, then the longer value is considered greater. If two values of equal length have no differing characters, then the values are considered equal. Oracle uses nonpadded comparison semantics whenever one or both values in the comparison have the datatype VARCHAR2 or NVARCHAR2.
" -
Using Like Operator in a decode function
Hi,
I am trying to find out if I can use the like operator in a decode function
like:
select decode(1234,like '%123%','123 is a match') from dual;
this reults in error ORA-00936: missing expression
is there any way to make this work?
thank youSQL> ed
Wrote file afiedt.buf
1 WITH tbl AS (SELECT '201aaa' dt FROM DUAL UNION ALL
2 SELECT '123bbb' dt FROM DUAL UNION ALL
3 SELECT '567ccc' dt FROM DUAL UNION ALL
4 SELECT 'ab123ddd' dt FROM DUAL
5 )
6 SELECT dt,CASE WHEN dt like '%123%' THEN 'Match'
7 ELSE 'Not Matched'
8 END With_case
9 ,DECODE(REGEXP_SUBSTR(dt,'123'),NULL,'Not Match','Match') With_Regexp
10 ,DECODE(INSTR(dt,'123'),0,'Not Match','Match') With_Instr
11 ,DECODE(REPLACE(dt,'123'),dt,'Not Match','Match') With_Replace
12* FROM tbl
SQL> /
DT WITH_CASE WITH_REGE WITH_INST WITH_REPL
201aaa Not Matched Not Match Not Match Not Match
123bbb Match Match Match Match
567ccc Not Matched Not Match Not Match Not Match
ab123ddd Match Match Match MatchEdited by: Saubhik on Jul 26, 2010 5:24 AM
Edited by: Saubhik on Jul 26, 2010 5:40 AM
Edited by: Saubhik on Jul 26, 2010 5:40 AM -
LIKE operator is not working in SQL Query in XML file
Hi Gurus,
LIKE operator is not working in SQL query in XML template.
I am creating a PDF report in ADF using Jdeveloper10g. The XML template is as follows
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="catalogDataTemplate" description="Magazine
Catalog" defaultPackage="" Version="1.0">
<parameters>
<parameter name="id" dataType="number" />
<parameter name="ename" dataType="character" />
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
SELECT ename, empno, job, mgr from EMP where deptno=:id and ename LIKE :ename || '%']]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="EmployeeInfo" source="Q1">
<element name="EmployeeName" value="ename" />
<element name="EMPNO" value="empno" />
<element name="JOB" value="job"/>
<element name="MANAGER" value="mgr" />
</group>
</dataStructure>
</dataTemplate>
if i pass the parameter value of :ename from UI, it doesn't filter. But if I give ename = :ename it retrieves the data. Can anyone help me why LIKE operator doesn't work here?
Appreciate your help,
Shyamal
email: [email protected]Hi
Well for a start, you are doing some very strange conversions there. For example...
and to_char(a.msd, 'MM/DD/YYYY') != '11/11/2030'
and to_char(a.msd, 'MM/DD/YYYY') != '10/10/2030'If a.msd is a date then you should e converting on the other side ie.
and a.msd != TO_DATE('11/11/2030', 'MM/DD/YYYY')
and a.msd != TO_DATE('10/10/2030', 'MM/DD/YYYY')Also, you may want to take into consideration nothing being input in :P2_ITEM_NUMBER like this...
AND INSTR(a.item_number,NVL(:P2_ITEM_NUMBER,a.item_number)) > 0Is item number actually a number or char field? If it's a number, you want to explicitly convert it to a string for using INSTR like this...
AND INSTR(TO_CHAR(a.item_number),NVL(TO_CHAR(:P2_ITEM_NUMBER),TO_CHAR(a.item_number))) > 0?
Cheers
Ben -
Problem with LIKE operator in select query
Hi,
I want to compare one field using LIKE operator. But i m not able to do that.
DATA: l_doctext type c value ''''.
CONCATENATE l_doctext s_lbktxt-low '%' l_doctext INTO s_lbktxt-low.
SELECT bukrs belnr gjahr blart bldat budat xblnr bktxt waers awtyp
FROM bkpf INTO TABLE g_t_bkpf_labor
FOR ALL ENTRIES IN g_t_bseg_unique
WHERE bukrs = g_t_bseg_unique-bukrs
AND belnr = g_t_bseg_unique-belnr
AND gjahr = g_t_bseg_unique-gjahr
AND blart = p_ldtype
AND bktxt LIKE s_lbktxt-low.
plz help. Am i dng something wrong.
Value in s_lbktxt can be like 'TEA.....'hi ,
check this program..
tables:mara.
data: begin of it_mara occurs 0,
matnr like mara-matnr,
meins like mara-meins ,
mtart like mara-mtart,
end of it_mara.
select-options: s_matnr for mara-matnr.
select matnr
meins
mtart
from mara
into table it_mara
where matnr like '%7'.
sort it_mara by matnr.
loop at it_mara.
write:/ it_mara-matnr,
it_mara-meins,
it_mara-mtart.
endloop.
regards,
venkat. -
I need a user to be able to enter a city to pull up results
for that city using a LIKE operator. However, if the master list
contains St. Paul, instead of Saint Paul, how can I get either one
to show up? I've tried several things and I just can't get it to
work!!! Thanks!I have had code like some below but it slows thing down
because indexes can't be used. Instead for searches that don't have
to be exactly up to date I build a work file that is in a
standardized format nightly but it could be done by triggers. This
code is for Oracle.
where
( length(
translate(
UPPER(LTRIM(RTRIM('#Form.StreetName#'))
'A,._%1234567890'
,'A')
) >= 4 AND
V.StNum = '#Form.StreetNumber#'
<CFIF '#Form.StreetDirection#' NEQ ''>
and V.stdir = '#Form.StreetDirection#'
</cfif>
and (
V.stName LIKE RTRIM(SUBSTR(
DECODE(
SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',1,INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',1,1)-1)
,'1','FIRST'
,'2','SECOND'
,'3','THIRD'
,'4','FOURTH'
,'5','FIFTH'
,'6','SIXTH'
,'7','SEVENTH'
,'8','EIGHTH'
,'9','NINTH'
,'10','TENTH'
,'11','ELEVENTH'
,'12','TWELVTH'
,'1ST','FIRST'
,'2ND','SECOND'
,'3RD','THIRD'
,'4TH','FOURTH'
,'5TH','FIFTH'
,'6TH','SIXTH'
,'7TH','SEVENTH'
,'8TH','EIGHTH'
,'9TH','NINTH'
,'10TH','TENTH'
,'11TH','ELEVENTH'
,'12TH','TWELVTH'
,'E','EAST'
,'N','NORTH'
,'S','SOUTH'
,'W','WEST'
,'SE','SOUTHEAST'
,'SW','SOUTHWEST'
,'SAINT','ST'
,'MT','MOUNT'
,'CT','COURT'
,'CORP','CORPORATE'
,SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',1,INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',1,1)-1))
||
DECODE(instr(ltrim(rtrim('#Form.StreetName#')),' ',1,1),0,'',
' '||
SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',1,1)+1,
INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ','
',-2,1)-INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#')))
,'`''_,.%','%%')||' ',' ',1,1))
||
DECODE(
RTRIM(SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',-2,1)+1))
,'AVENUE','AV'
,'AVE','AV'
,'BOULEVARD','BL'
,'BLVD','BL'
,'COURT','CT'
,'CRT','CT'
,'DRIVE','DR'
,'LANE','LN'
,'PARK','PK'
,'PLACE','PL'
,'POINT','PT'
,'POINTE','PT'
,'ROAD','RD'
,'SQUARE','SQ'
,'STREET','ST'
,'STR','ST'
,'TRACE','TR'
,'TRAIL','TR'
,'CIRCLE','CIR'
,'CR','CIR'
,'EXTENSION','EXT'
,'HIGHWAY','HWY'
,'HIWAY','HWY'
,'HIWY','HWY'
,'PIKE','PKE'
,'RW','ROW'
,'RN','RUN'
,'TERRACE','TER'
,'WY','WAY'
,RTRIM(SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',-2,1)+1)))
),1,4))
||'%'
OR
V.stName LIKE RTRIM(SUBSTR(
DECODE(
SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',1,INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',1,1)-1)
,'1','FIRST'
,'2','SECOND'
,'3','THIRD'
,'4','FOURTH'
,'5','FIFTH'
,'6','SIXTH'
,'7','SEVENTH'
,'8','EIGHTH'
,'9','NINTH'
,'10','TENTH'
,'11','ELEVENTH'
,'12','TWELVTH'
,'1ST','FIRST'
,'2ND','SECOND'
,'3RD','THIRD'
,'4TH','FOURTH'
,'5TH','FIFTH'
,'6TH','SIXTH'
,'7TH','SEVENTH'
,'8TH','EIGHTH'
,'9TH','NINTH'
,'10TH','TENTH'
,'11TH','ELEVENTH'
,'12TH','TWELVTH'
,'E','EAST'
,'N','NORTH'
,'S','SOUTH'
,'W','WEST'
,'SE','SOUTHEAST'
,'SW','SOUTHWEST'
,'SAINT','ST'
,'MOUNT','MT'
,'CT','COURT'
,'CORP','CORPORATE'
,SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',1,INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',1,1)-1))
||
DECODE(instr(ltrim(rtrim('#Form.StreetName#')),' ',1,1),0,'',
' '||
SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',1,1)+1,
INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ','
',-2,1)-INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#')))
,'`''_,.%','%%')||' ',' ',1,1))
||
DECODE(
RTRIM(SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',-2,1)+1))
,'AVENUE','AV'
,'AVE','AV'
,'BOULEVARD','BL'
,'BLVD','BL'
,'COURT','CT'
,'CRT','CT'
,'DRIVE','DR'
,'LANE','LN'
,'PARK','PK'
,'PLACE','PL'
,'POINT','PT'
,'POINTE','PT'
,'ROAD','RD'
,'SQUARE','SQ'
,'STREET','ST'
,'STR','ST'
,'TRACE','TR'
,'TRAIL','TR'
,'CIRCLE','CIR'
,'CR','CIR'
,'EXTENSION','EXT'
,'HIGHWAY','HWY'
,'HIWAY','HWY'
,'HIWY','HWY'
,'PIKE','PKE'
,'RW','ROW'
,'RN','RUN'
,'TERRACE','TER'
,'WY','WAY'
,RTRIM(SUBSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||'
',INSTR(translate(UPPER(LTRIM(RTRIM('#Form.StreetName#'))),'A`''_,.%','A')
||' ',' ',-2,1)+1)))
),1,4))
||'%' ) -
Problem in JDBC , when using LIKE operator. - VERY URGENT
Problem in JDBC , when using LIKE operator.
LINE 1 : String temp = "AA";
LINE 2 : String query = "select * from emp where EMPNAME like '*temp*' ";
LINE 3 : Staement st = con.createStaement();
LINE 4 : ResultSet rs = st.executeQuery(query);
'*' character is not getting evaluated. In MS ACCESS2000 only * is accepted instead of '%'. Moreover in MS ACCESS the like operator has to be used within double quotes as a String. whereas in other databases, it accepts single quotes as a String.
Ex:
In MS ACCESS
select * from emp where ename like "*aa*";
Other Databases
select * from emp where ename like '%aa%';
In my situation iam passing a Variable inside a like operator and '*' is used.
For the above Scenario, Please help me out.
If possible Kindly let me know the exact Syntax.
Please give me the answer as LINE1,LINE2,LINE3,LINE4,
I have verified in JDBC Spec also, it has been specified to use escape sequence.that too did not work.
Due to this, My project is in hold for about 4 days. I could not find a suitable solution.
Please help me out.I made a LIKE clause work with M$ Access, using PreparedStatement and the % wildcard:
escapeStr = "%";
String sql = "SELECT USERNAME, PASSWORD FROM USERS WHERE USERNAME LIKE ?";
PreparedStatement statement = connection.prepareStatement(sql);
statement.setString(1, ("user" + escapeStr));
ResultSet resultSet = statement.executeQuery();
while (resultSet.next())
System.out.println("username: " + resultSet.getObject("USERNAME") + " password: " + resultSet.getObject("PASSWORD")); -
Case Insensitive Search coupled with "LIKE" operator.
Greetings All, I am running Oracle 11gR1 RAC patchet 25 on Windows X64.
This db supports and application that requires case insensitive searches.
Because there are a few entry points into the db I created an "after login" trigger:
CREATE OR REPLACE TRIGGER MyAppAfterLogon_TRGR
AFTER LOGON
ON DATABASE
DECLARE
vDDL VARCHAR2(200) := 'alter session set nls_comp=''linguistic''';
vDDL2 VARCHAR2(200) := 'alter session set nls_sort=''binary_ci''';
BEGIN
IF ((USER = 'MyAppUSER') OR(USER = 'MyAppREPORTINGUSER')) THEN
EXECUTE IMMEDIATE vDDL;
EXECUTE IMMEDIATE vDDL2;
END IF;
END MyAppAfterLogon_TRGR;
This ensures that everyone connecting to the DB via any mechanism will automatically have case insensitive searches.
Now, to optimize the know queries I created the standard index to support normal matching queries:
select * from MyTable where Name = 'STEVE';
The index looks like:
CREATE INDEX "CONTACT_IDX3 ON MYTABLE (NLSSORT("NAME",'nls_sort=''BINARY_CI'''))
This all works fine, no issues.
The problem is when I write a query that uses the "LIKE" operator:
select * from MyTable where Name like 'STEV%';
I get back the record set I expect. However, my index is not used? I can't for the life of me get this query to use an index.
The table has about 600,000 rows and I have run gather schema stats.
Does anyone know of any issues with case insensitive searches and the "LIKE" clause?
Any and all help would be appreciated.
LI think there is issue with your logon trigger :
"IF ((USER = 'MyAppUSER') OR(USER = 'MyAppREPORTINGUSER')) THEN"
it should be :
IF UPPER(USER) = 'MYAPPUSER' OR UPPER(USER) = 'MYAPPREPORTINGUSER' THEN
because user name stored in Upper case. Check and try.
HTH
Girish Sharma -
How does this LIKE operator work ?
Values JOHN and KEITH have spaces in the string.
create table string_test ( test_str varchar2(15));
insert into string_test values ('JO HN');
insert into string_test values ('JOHN');
insert into string_test values ('RAM');
insert into string_test values ('KEITH ');
SQL> select * from string_test;
TEST_STR
JO HN
JOHN
RAM
KEITHFrom OTN , i found the query to find all string values which has a white space in it.
select * from string_test where test_str like '%' || chr(32) || '%';But, i don't understand how this works. Won't the percent sign in single quotes ('%') be considered a literal ?GarryB wrote:
Values JOHN and KEITH have spaces in the string.
create table string_test ( test_str varchar2(15));
insert into string_test values ('JO HN');
insert into string_test values ('JOHN');
insert into string_test values ('RAM');
insert into string_test values ('KEITH ');
SQL> select * from string_test;
TEST_STR
JO HN
JOHN
RAM
KEITHFrom OTN , i found the query to find all string values which has a white space in it.
select * from string_test where test_str like '%' || chr(32) || '%';But, i don't understand how this works. Won't the percent sign in single quotes ('%') be considered a literal ?No, because the "%" sign has special meaning to the LIKE operator. It's a wildcard meaning any characters. -
Exclude "*" in Like operator
Hi All,
I am trying to use like operator for an output data which has "*" appended at the end.
For example, following is the Place_ID which i have data in a table
12190101*
12349021
12347284
12598992*
When i provide search criteria as "1234" in my application, my query is making the condition as
Place_ID Like "1234%"
But unfortunately it is giving 4 rows as output which is not considering the values which is appended with '*".
I tried making use of the following, but still this is not working.
Place_ID Like "1234%" ESCAPE '*'
Can someone suggest me where i am doing wrong.
Thanks,
PrakashPrakash wrote:
But unfortunately it is giving 4 rows as output which is not considering the values which is appended with '*".It is not clear what output you expect. But one thing is for sure: condition Place_ID Like 11234%' can't return 4 rows:
{code}
with data as(
select '12190101*' place_id from dual union all
select '12349021' from dual union all
select '12347284' from dual union all
select '12598992*' from dual
select place_id
from data
where place_id like '1234%'
PLACE_ID
12349021
12347284
SQL>
{code}
So post desired results.
SY. -
SQL Query With Like Operator - Performance is very poor - Oracle Apps Table
Hi,
I'm querying one of the Oracle Applications Standard Table. The performance is very slow when like operator is used in the query condition. The query uses a indexed column in the where clause.
The query is..
select * from hz_parties
where upper(party_name) like '%TOY%'
In the above case, It is not using the index and doing full table scan. I have checked the explain plan and the cost is 4496.
select * from hz_parties
where upper(party_name) like 'TOY%'
If I remove the '%' at the begining of the string, the performance is good and it is using the index. In this case, the cost is 5.
Any ideas to improve the performance of the above query. I have to retrieve the records whose name contains the string. I have tried hints to force the use of index. But it is of no use.
Thanks,
RamaIf new indexes are disallowed, not a lot of good ones, no.
If you know what keyword(s) are going to be searched for, a materialized view might help, but I assume that you're searching based on user input. In that case, you'd have to essentially build your own Text index using materialized views, which will almost certainly be less efficient and require more maintenance than the built-in functionality.
There may not be much you could do to affect the query plan in a reasonable way. Depending on the size of the table, how much RAM you're willing to throw at the problem, how your system is administered, and what Oracle Apps requires/ prohibits in terms of database configuration, you might be able to force Oracle to cache this table so that your full table scans are at least more efficient.
Justin -
How to use like operator in IFTHENELSE (BODS)
Hi All,
I want to find the value of ' % ASSOC%' in the name and replace it to 'Assoc.' using ifthenelse.
Can any one help me. Is there any similar fuction as LIKE operator. Can we give LIKE in ifthen else condition.
Thanks in advanceHi ,
if you have data ASSOC1,ASSOC2
and you want Output like Assoc.1,Assoc.2.
In this condition it is not possible with ifthenelse function
it will return output as Assoc.
Example Source:
If we use if then else condition. Then it will replace all the Data to Assoc.
Or else if you want to replace ASSOC to Assoc. Then you can use Search_Replace also
it will generate a XML script
The expected output as follows in the below screen. As per your requirement you can you any one of this.
Regards,
Akhileshkiran.
Maybe you are looking for
-
Help! Battlefield 2 doesn't work on iMac 24"
Hi! I have iMac 24" with nVidia GeForce 7300 GT, BootCamp'ed Win XP. So, when I try to start Battlefield 2 it crashes straight after the black screen. I suppose just before game's intro. I've seen there in discussions that BF2 works on iMacs with ATI
-
In address book, display address or other columns
I cannot figure out how to display additional fields/columns in address book. I can adjust size of existing fields but adding new fields is a puzzler.
-
E-Filing GB using SAP XI with ECC 6.0
Hi, Has any one come across the e-Filing GB Implementing the scenario using XI? I have downloaded the Content(e-Filing GB.tpz & SAP HR 6.0.tpz) from SMP which is mentioned in the document. Successfully imported the content in IR, i can able to see th
-
Hi I am working on some project and am encountring for loop in some strange format. Can anyway help me with understanding this format of for loop. this is something like: for(Case q: cases) can you simplify of map this to simple format of loop. Thank
-
Getting wife a new iphone..backup questions
Not too good in using itunes. My wife has an iphone and my limit to itunes is putting some songs on my ipod. I want to surprise my wife with a new iphone this week and before I get her a new one I want to make sure I save all of her content and mos