Like select the icon "italic type or bold" to compose text

like select the icon "italic type or bold" to compose text

As I select italic or bold font when writing a message

Similar Messages

  • How to default distribution account through purchase requisition, selecting the project expenditure type

    Dear All,
    How to default distribution account through purchase requisition, selecting the project expenditure type
    Thanks
    Abdul.

    Hi Abdul,
    If you meant defaulting Purchase Order distribution accounts from the (backing) requisition, then the accounts from requisitions will default into the autocreated PO.
    If you seek to default distribution accounts for Purchase Requisition using Projects, then the account generator need to have customized rules defined to default account for project enabled distributions based on the Project/Task/Organization/Expenditure Type/Date combination entered.
    This note is an extract from the user's guide, and has good detail on defaulting rules of accounts for Purchase Documents:
    How Does The Account Generator Default The Accounts In Oracle Purchasing? (Doc ID 1067139.1)
    Hope this helps.
    Vanha

  • Q10 - I tap the screen to select, the icon changes color (indicating selection) but nothing happens...

    I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time. 
    When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens. 
    Sometimes this happens more than 5 times in a row.  It's one thing if the screen never recognized my finger/thumb in the first place.  It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens.. 
    Anyone else having this problem?  Is there some way to recalibrate the screen? 
    Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger.  The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap... 

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How do i select the file extension type?

    using imovie '11.
    i've finalised a project and exported it. it automatically saved as a .m4v (itunes) file.
    my question is:
    is there any way to manually select the file extension when saving/finalising a project?
    for example, i might be required to save a project as a .mov file.
    thanks in advance.

    Publish the movie on itunes then, drag the movie on your desktop. After right click on the movie icon and click get info. Go to name and extension and change the .m4v to .mov . This should work because, it works if you want to change from .mp4 to .3gp etc... This saves you time because you don't have to use a movie converter.
    Best of luck Jono

  • Selecting the correct membership type

    Hello,
    I am wondering if I selected the correct type of Creative Cloud membership a couple of months ago upon signup.
    I am a photographer and use only Lightroom and Photoshop. Upon switching over to Creative Cloud, I selected the "Creative Cloud for Teams" but now I am thinking that this may not have been the best option. I work alone and only need the two apps.
    Can I switch my membership to something that makes more sense for my business?
    Thanks!

    Cancel what you don't want and buy what you do want
    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    Special Photography Plan (includes Photoshop & Lightroom & Bridge & Mobile Lightroom)
    http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
    http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
    Contact Adobe to find out how to do this without paying a penalty
    Adobe contact information - http://helpx.adobe.com/contact.html

  • Print program for the smartform for selecting the output type (email/fax)

    Hi All,
    Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
    can any body please let me know how  to put the condition for selecting the desired  output type ?
    Thanks in advance
    Rahul

    Hi
    It is not the output type that has to be changed
    it is the MEDIUM which you have to change and configure
    for printout medium is 1
    for FAX medium is 2
    for MAIL it is 7.
    so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
    Reward points for useful Answers
    Regards
    Anji

  • How do  I change the icons?

    I would like to customize the icons on my desktop. is this possible?

    There are several good utilities out there for creating your own custom icons. You can download sets of them from the download page. All you have to do is do a Get Info on the item with the Icon you want to copy, click on the icon at the top of the info window, copy (cmd-c), get info on the item where you want the new icon installed, select its icon, then paste (cmd-v). Note that if the target item already has a custom icon, the new icon may not paste in properly. The solution is to select the icon in the info window of the destination item, press delete, then paste the new icon.

  • I can no longer change the icon of the startup disc... What gives?

    I used to be able to get info, select the icon and paste a new icon on it, but now it won't let me. This works fine/as usual with my other mounted drives. Any ideas?
    thanks for your help...

    Instead of using the Get Info window you can put your desired icon, as an .icns file, at root level (the window that opens when you dbl-click the volume icon), calling it ".VolumeIcon.icns" - note the leading "." which makes the file invisible in the Finder. Your custom icon will appear instantly as the startup disk's icon.
    Andreas

  • I have an issue with the Recycle Bin. It does not respond if I click on the Icon. I have to empty the bin via another programve an issue with the Recycle Bin. It does not respond if I click on the Icon. I have to empty the bin via another program

    I have an issue with the Recycle Bin. It does not respond if I click on the Icon. I have to empty the bin via another program

    "CCleaner" is a scam and it may well have corrupted the operating the system. Get rid of it according to the developer's instructions, then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon, usually with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Ibooks for mac. the app will not open the icon is a white sheet with a pen pencil and a ruler

    ibooks app for mac will not open. when i try to open it i get a error message " problem report for ibooks "  ibooks quit unexpectidly then a log with error code opens up. please help correct this problem  thank you  AG

    If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
    Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • How to find out program name to the corresponding output type of invoice..

    hi ALL,
    I want to findout program name to my output type.
    For one invoice functional peoples are configured. Here i know the outtype. But i don't know the program name .
    Can any body please tell me how to find out the program name for the output type..?

    Hi,
    Goto NACE t-code
    Select Billing (V3)
    Press 'Output Types' Button
    In the next screen select the corresponding output type you want.
    Then press 'Processing Routines' in the left pane. You can see the program name
    Cheers,
    Kothand

  • TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

    I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

    Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on.  Then see if you can access Settings.

  • Hello, a cant type anything ,not in photoshop and not in inIllustrator ,I've got a message like "selected font faild during last operation".If problem persists,please desable the font..

    Hello, a cant type anything ,not in photoshop and not in inIllustrator ,I've got a message like "selected font faild during last operation".If problem persists,please desable the font..

    Looks like a corrupt font.
    Illustrator is more picky about fonts than any other application.

  • When attempting to "save as" a word document and selecting micrsoft word as the "save as type", it no longer will save it in a word icon document, the icon is just a blank document symbol and thus cannot email this document as before.

    when attempting to "save as" a word document and selecting micrsoft word as the "save as type", it no longer will save it in a word icon document, the icon is just a blank document symbol and thus cannot email this document

    Here are my two cents.
    The resources defining the file formats which Pages may import or export are stored in the file :
    Macintosh HD:Applications:iWork '09:Pages.app:Contents:Info.plist
    Assuming that you didn't installed the Developer tools, go to my iDisk (address below)
    Download :
    Pref Setter.app.zip
    Unpack the archive.
    Open the file "Info.plist" with Pref Setter.
    Open the entry entitled :  CFBundleDocumentsTypes
    Open the items 9, 10, 11, 12
    The normal contents is :
    Double check the parameters available for items 9 & 10.
    What you get may be linked to some oddity in these resources.
    Yvan KOENIG (VALLAURIS, France) samedi 1 octobre 2011 18:00:23
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • HT4528 The screen when accessing text msg or trying to type increases in size and I can't see the entire keyboard, also a problem in the basic screen the icons get huge, almost like the ipad screen size. How do I correct?

    Sometimes when using the text screen, the font for the keyboard increases in size limiting the view of the entire keyboard on the screen. So far the only way to correct is to poweroff the iphone and the poweron aqgain and the problem ius corrected. This also happens on the basic screen, the size of the icons are enlarged, to a size that you can only see one or two icons or parts of them.

    Try going to Settings>General>Accessibility>Zoom to be sure it's off.  If the screen is already magnified, double-tap the screen with three fingers to zoom out.

Maybe you are looking for

  • When I make a new Calendar event the phone loads, and then the event disappears! How can I fix this?

    On my iPhone 4 8GB unlocked (iOS 6), whenever I try to make a new event in Apples Calendar app, when I am done making the event, the phone shows a small loading circle in the top bar and when that loading circle stops the event disappears. I checked

  • List of Customer Line Items through F.21

    Hi, I am trying to generate a list of customer line items through F.21 and I am using ECC6. I noticed that other tick boxes (line items required, subtotal, total by currency, total per business area, etc) for output control that we used to have in 4.

  • Apple TV | home sharing

    I have been using my iPhone and ipad to turn on Apple TV. I thought I would try home share since we all like looking at our family pictures and music. Well, now I can't turn on the Apple TV. (My remote went through the wash) what do I do? I'm addicte

  • How do I get MacBook Air to see Windows Home Server and show it in Finder?

    New to Mac (having used Windows for years) so this may be a dumb question. Have a MacBook Air (new) and have a home network with a Windows Home Server on the network. I can't figure out how to get the MacBook Air to see the Windows Home Server. It do

  • Activity Clipboard in Interaction record

    Hi Gurus I am using CRM 7.0 EHP1 and when I create a Interaction record I don't see the activity clipboard columns. I see just caption "Activity Clipboard". I don't see anything else. I have attached the activity clipboard profile to me role. Please