LIKOND01 IDoc
Hello Experts,
We have a requirement of sending listing data (whether articles is listed or delisted) from ECC to a legacy system. We have analyzed the option os using LIKOND01, Assortment 01or WBBDLD03. We opted for LIKOND01 since it is lighter as compared to WBBDLD03. We tried to find the documents related to both of these IDocs in help.sap etc, but could not find any information accept the header and detail records. We just wanted to know how we can trigger this LIKOND01 IDoc in ECC and whether our approach will satisfy our needs.
Any information in this regard will be appreciated.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Dec 30, 2010 9:25 AM
Hello Venu,
Thanks for your reply.
LIKOND01.
We will activate the necessary change pointers and other configurations.
What we want to know that once the change pointers are activated the LIOKOND01 IDoc will be created as soon as the listing is done in ECC and entry created in WLK1 or we have to use some t-code. Can this be done?
WBBDLD03
We also tried to create the WBBDLD IDoc after creating a listing in ECC using transaction WDBU or WDBM, but could not.
Please provide your input. I have also checked BD50 (whether it is Active) and BD52 also.
Also i tried Automatic creation of Idoc of basic type WBBDLD, however i checked the FM MASTERIDOC_CREATE_WBBDLD, and when excecuting RBDMIDOC program with the messg type WBBDLD, i am getting a ABAP DUMP.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Jan 7, 2011 10:31 AM
Similar Messages
-
Listing data from ECC to legacy system??
Hello Experts,
This is my first post and hopefully in the correct forum:
We have a requirement of sending listing data (whether articles is listed or delisted) from ECC to a legacy system. We have analyzed the option os using LIKOND01, Assortment 01or WBBDLD03. We opted for LIKOND01 since it is lighter as compared to WBBDLD03. We tried to find the documents related to both of these IDocs in help.sap etc, but could not find any information accept the header and detail records. We just wanted to know how we can trigger this LIKOND01 IDoc and whether our approach will satisfy our needs.
Any information in this regard will be appreciated.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Dec 25, 2010 1:10 PM
Edited by: rakeshjain_hit on Dec 29, 2010 1:17 PMHello Venu,
Thanks for your reply.
LIKOND01.
We will activate the necessary change pointers and other configurations.
What we want to know that once the change pointers are activated the LIOKOND01 IDoc will be created as soon as the listing is done in ECC and entry created in WLK1 or we have to use some t-code. Can this be done?
WBBDLD03
We also tried to create the WBBDLD IDoc after creating a listing in ECC using transaction WDBU or WDBM, but could not.
Please provide your input. I have also checked BD50 (whether it is Active) and BD52 also.
Also i tried Automatic creation of Idoc of basic type WBBDLD, however i checked the FM MASTERIDOC_CREATE_WBBDLD, and when excecuting RBDMIDOC program with the messg type WBBDLD, i am getting a ABAP DUMP.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Jan 7, 2011 10:31 AM -
Logical System in IDOC-XI scenario
Hi,
I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No. 2) Logical System.
my questions are
a) Are we use Logical System in B to B scenario ?
b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
Thanks and Regards
Mahesh.Hay Kumar,
Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
Have a Good One,
Uri Lifshitz. -
Hi All,
I am using SAP MII 12.1.5 Build 87.
I am facing problem with iDoc Listner we have configured iDoc Listner properly in SAP ERP, SAP NW and in SAP MII.
We are able to send iDoc from SAP but we are not able to receive same in MII.
Port and iDoc Server is giving status connected previously it was working fine in SAP MII 12.1.5 Build 83.
Following are the log details for SAP MII Logger as well as SAP NW Log.
SAP NW Log:
Error processing JRA IDOC message
SAP MII Log:
Error processing JRA IDOC message
Error processing JRA IDOC message [server=xxx, client=xxx]
[EXCEPTION]
java.lang.NullPointerException
at com.sap.xmii.ejb.JRAListenerBean.onMessage(JRAListenerBean.java:130)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
at $Proxy943.onMessage(Unknown Source)
at com.sap.mw.jco.jra.idoc.JRAIDocExtension$IDocMessageHandler.onMessage(JRAIDocExtension.java:72)
at com.sap.mw.jco.jra.JRA$ReaderThread.sendDirectToMdb(JRA.java:6641)
at com.sap.mw.jco.jra.JRA$ReaderThread.sendAsynchRequest(JRA.java:6601)
at com.sap.mw.jco.jra.JRA$ReaderThread.handleRequest(JRA.java:6771)
at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:989)
at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:967)
at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:142)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2927)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2659)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2478)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2362)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2207)
at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:259)
at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:322)
at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:220)
at com.sap.mw.jco.jra.JRA$ReaderThread.run(JRA.java:7260)
at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:255)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Please help me out on this issue.
Regards,
Manoj Bilthare
Edited by: Manoj Bilthare on May 19, 2010 12:57 PMHi Manoj,
Once you have configured your Listener have you checked pressing the update button and i dont want to ask you which version of NW SP you have installed as you said it was working for you with Build 83, but nevertheless NW SP Level should not be not less than SP3.
If this doesn't help you,please try restarting your server again.
How about the credential editor have you configured this as well?
Regards,
Sudhir Kumar
Edited by: Sudhir Kumar Shambana on May 19, 2010 10:46 AM -
Open Sales orders through IDOC
Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any IDOC message type available for this in SAP R/3 4.7 version or is there a standard solution of sending these details through IDOC
Regards
AnandhHi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any IDOC message type available for this in SAP R/3 4.7 version or is there a standard solution of sending these details through IDOC
Regards
Anandh -
Scheduling Agreement with Delivery Schedule using Idoc messages
Hi all,
Can anybody please explain the importance of the field name "LABKY" in Idoc execution for Forecaste/JIT Delivery Schedule.
My requirement is that when i send a new Idoc i do not want the old schedule line which are not yet released , to be deleted .
As per the SAP help the use of the field LABKY is related to this , but when i tried its value as "1" , the previous schedule lines are still getting deleted.
Can you pls explain how to go about it . ( DELFOR/DELJIT Idocs)
Thank you
Regards
SubhaHi ,
The Field
LABKY : Delivery schedule key
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 026, Offset : 0393. external length : 000001
Regards
Seegal -
Invoice and delivery notes - idocs..
Hello SD experts,
I am new to SD.
Can any one tell me what is the invoice. I mean
what are the table AND transaction codes I have to go and check ?
What are delivery notes ?
My functional consultant is telling that
there is a consolidated invoice and there are 2 delivery notes that are being combined for this invoice. The invoice # is 6016186004
For DN# 6073107044 there is a VICS BOL that was passed back that is = 04000000000016146
6073107045 there is a VICS BOL that was passed back that is = 04000000000016023
and he wants to know how the program selects which VICS BOL fields in IDOC. He gave me to use IDOC #77122253 in quality system for testing.
In this case , Idoc checking/testing...I need to go to RSNAST00 program ?
If so then what are the I need to give
Output application (is it V1 or MR ?)
Output type ??hi ..
Please refer below..
for invoice , tables: VBRK and VBRP
AND transaction codes : VF01 to 03.
What are delivery notes ?
after goods issue, we need to issues delivery note to customer.
In this case , Idoc checking/testing...I need to go to RSNAST00 program ?
you need to go to VL70 or you can process with RSNAST00.
Output application type : V2
Output type : LD00
Regards
Venkat.. Ananth Technologies -
Error Posting IDOC: need help in understanding the following error
Hi ALL
Can you please, help me understand the following error encountered while the message was trying to post a IDOC.
where SAP_050 is the RFC destination created to post IDOCs
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated.............Thank you!Hi Patrick,
Check the authorizations assigned to the user which you used in the RFC destinations, If there is no enough authorizations then it is not possible to post the idocs.
Also Refer this Note 747322
Regards,
Prakash -
Error while executing a JDBC to Idoc scenario : No standard agreement found
Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
RaviHi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka -
Getting an error "Customer could not be determined" for IDOCs in SCM 7.0
Hi Friends,
I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
I have noticed that 2 things .
1. E1ADRE1 field is NOT being sent by the ECC system .
2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
Has anybody faced this problem before ?
I look forward to replies.
Detailed error is given below.
Regards,
Ranjini.
Customer could not be determined
Message no. /SAPAPO/EDI010
Diagnosis
The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
The section was not available in the processed IDoc.
System Response
The system cancels processing.
Procedure
Configure the EDI convertor in such a way that the corresponding section has a value.Hi Ranjini,
Please look into the following
1) Customer master data is fully maintained
2) Customer number ranges are fully defined in customisation
3) Customer address details are maintained
4) Is there any special characters used while defining customer data or customer
number like $, #,[ etc.,?
5) Customer int models are active in SCM side prior to IDOC processing (including
customer, demand, stocks etc)
Please confirm your findings
Regards
R. Senthil Mareeswaran. -
Error in creation of PurOrd IDoc
Hi All,
I have set up the output type for PO and created patner profiles and also add the message types ORDER and ORDCHG but when I save the PO and check the messages, I get an error: " No recipient found for message type ORDERS in the ALE Model ".
What could be the possible problem?
Highly appreciate any kind of help.
Thanks in advance,
Shweta
PS: <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada GalindoHi
Check the Partner Profile in WE20 correctly
also see the steps for it as per the doc
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Regards
Anji -
Error while updating the status record of IDOC in SAP
Hi All,
I am facing this problem. I have done outbound processing and IDOC was sent successfully from SAP to EDI system and it was processed in EDI and now EDI system wants to send the status back to SAP with a status message and the status number that we are using is '24' and we have mapped all the fields in the status table EDIDS and made sure that EDI system sends all those and I think Counter field can not be determined by EDI system so EDI system used the counter '1' since it can not determine how many counters are already there in SAP and unless we pass the value to this counter field we were getting the error. After passing all the values the status of the IDOC is updated with the status '00' instead of '24' and we do not know why it is happened and I would like to know how SAP converts the status record that is received from the EDI system.
Please let me know how the status record will be translated into SAP from EDI system and I ahve followed basically EDIDS structure and the IDOC status is updating in SAP but with wrong status number and the alignemnt also missing in SAP fields like if I give some text in the EDI it is splitting and storing in 2 fields.
Please help me in this and I think I have explained the problem in a detail manner.
Thanks,
Ramesh.Hi Naresh,
Thanks for the reply and my question is since EDI system is able to send the status back to SAP from EDI system and only problem is it is updatinf the status wrong and I have checked the EDIDS table also and the entry is creating with another counter and please confirm me that it is because of EDI does not support the status record update so that I can confirm to the client that there is nothing wrong in the way SAP functions and EDI system can not update the status code in the SAP.
Thanks,
Ramesh. -
Help in creation of XML file for IDOC postings
Hi All,
Need help if anyone has knowledge/experience in creating XML files for IDOC processing.
We need to design an input file (in XML format) for creation of IDOCu2019s for purchase Invoices through Interface.
We have an existing input file, which is working correctly. We are trying to modify this existing input file for a new Tax Code (Non-deductible inverse tax liability). This tax code is working fine for manual postings. But, through IDOC, tax postings are not correctly triggering.
Could you please confirm if any one has experience on this, so that I can share more details for resolving.
Thanks & Regards,
SriniHello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto -
Issue:Creation of Extended iDOC data entries in receiving system.
Hi all,
I have extended standard IDOC MATMAS05 for classification view.I am receiving the data successfully on recewing side.And i have done coading in user exit to store data in database table inside
IDOC_INPUT_MATMAS01- function module.
When i execute the BD10 from sending sytem and view the idoc at receiving end from WE05 i can see the idoc but when i try to see the material i cant see the classification(extended) view in mm03.Rest of the views are created .When i execute the idoc from WE19 ,Classification(extended) view gets created.
Please guide me so that the CLASSIFICATION view get automatically created in receiving system without using WE19.
Thanks.Yes i used this function module-
CALL FUNCTION 'BAPI_OBJCL_CREATE'
EXPORTING
objectkeynew = objectkeynew1
objecttablenew = 'MARA'
classnumnew = wa_classnumnew1
classtypenew = z1sklart-klart "classtypenew1
status = '1'
STANDARDCLASS =
CHANGENUMBER =
keydate = sy-datum
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUM =
allocvalueschar = allocvalueschar2[]
ALLOCVALUESCURR =
return = return1
*WAIT UP TO 1 SECONDS.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
RETURN =
Please explain me how to maintain the Views Status at MARA general info segment level. -
Creation of Business Partner through IDOC
Dear All,
I have to create a business partner which happens through Idoc of message type DEBCOR. My problem is that though I am getting the IDOC message as incoming type which is also getting processed however the creation of BP is not happening. Since IDOC is also showing in green as successfully processed, I dont have any clue where to check it. Any idea as to what could be the possible problem ?
best regds
SubhaIDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.
Maybe you are looking for
-
How do I get a mixer to show up in Soundtrack Pro?
The problem is not using a mixer but I can't get one to show. I see my sound track, (can play) and did analysis and cleaned up but clicking all mixer buttons and choosing a different layout all 3 choices never give me a mixer. The lower pane with the
-
ITunes keeps crashing on my Dell PC.
iTunes keeps crashing on my Dell PC with Windows Vista. I have already uninstalled and reinstalled- didn't help. iTunes will open, but then crashes after about two or three minutes, no matter what I'm doing with it at the time. Any ideas? Could a la
-
I am thinking of dropping cable. I'm not here to slam my provider but the price for a less than basic package is through the roof. We are now streaming NetFlix on all our TV's and I have been introduced to the world of HULU.... What do I need to d
-
Dear all, I need to copy functions and packages from one db to the other.. For some reasons I cannot be able to use export.. Is it possible to copy this though a db link ? Kai
-
Hi, I have a query reagrding Excel download. Is it possible to download an Excel from SAP GUI in background using GUI_DOWNLOAD/WS_DOWNLOAD/DOWNLOAD?. Please let me know any alternatives for my situation. Thanks in advance Ravi.