LimeWire doesn't connect on Mac OS X Leopard... What's the problem???
I've got constantly firewall icon on and one bar in the connection progress...... When I put my tracking arrow on it, it shows: "You are currently connecting to the network"..... I tried to restart Mac, but it doesn't help.... What I'm supposed to do??? Help me!!!
P.S. As a matter of fact all P2P programs don't work on my Mac...:/ Under the Tiger on the same network all P2P programs work smoothly...:/
Limewire has not updated their software for Leopard. Currently only runs on 10.4.X (Tiger) according to their website.
Similar Messages
-
But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day and i was forced to use back a backup which i did in my old laptop 4 months ago. do i have to reinstall the itunes? will my backups be corrupted after i sync again? pls guide.
P.S/ its the latest version of the itunes whenever i did the backups.iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
I cannot connect to iPhone personal hotspot. What's the problem?
I have connected to iPhone hotspot using wifi and USB cord in the past. My current problem started with my wifi about a month ago. My wifi on my iPhone would not toggle on (grayed out) for about 2 weeks. After rebooting and restarting, I finally had to wipe phone clean and start hardware from new. After powering down several times over the following week, it surprisingly started working again. However, it will continue to go in & out sporadically. My iPad and loptop will recognize my iPhone's wifi, but will not connect. I can connect through USB cord and iPhone shows 1 connection, but laptop will not pick up connection. I have also tried to reentered password. All software is current. What's the problem?
Try the USB troublshooting tips here: http://support.apple.com/kb/ts2756
-
Just updated to OSX 10.9.2 at invitation of Apple, but find I now have no access to iphoto and all prior photos in my Mac are gone. It says iphoto isn't compatible with this version. All other prior documents, podcasts, music etc is intact. Where are the photos?
iPhoto versions older than 9.5 are incompatible with Mavericks. Version 9 or later should be eligible for a free upgrade to the current version in the App Store. Versions older than 9 will need a paid upgrade.
-
When I try to download a app from the App Store to my iPhone a message keeps coming up saying 'cannot connect to iTunes' it's happening a few days now. Helpppp
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?
What are you getting on the TV? Are you getting a completely blank screen, or are you getting a message similar to 'no input detected'? Or are you seeing the spiral galaxy desktop? If you go into System Preferences -> Displays then do you have an 'Arrangements' tab?
-
Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.
I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can). -
my iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to iOS8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to iTunes(Asus Eee pc) What do i do? please help me.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
And as necessary:
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Recently when I connect my iphone 4 to my Mac for normal synchronising i found after a few minutes all my purchased apps were deleted and gone ? I have no problem to retrieve them back but that is exhausting and I am feeling sick ? what is the problem ? please help me and thank you
Make sure Sync Apps is checked on the Apps tab of your iTunes sync settings and that all the apps are checked that you want on your phone. Also be sure that your computer is authorized for all Apple IDs used to purchase your apps (and other media) in Store>Authorize this Computer.
-
What am I missing here. I'm sure it is some kind of sitting that is not right.
Thanks PatSounds familiar:
lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?
Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?in response to Patricia Isaac1
Power off and then back on the router
What happens when you enter the network's PW?
Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
Csound1 wrote:
Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router. -
my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?
When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
Those tests determine whether:
a) Your Mac software had stopped working OR
b) Only the display had stopped working
If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
¿Software was still running?
--Yes, the problem is ONLY in the display subsystem
--No, this is a computer-wide problem such as a kernel panic -
Firefox is trying to download a software update but it's been over an hour and it still says "connecting to the update server". It doesn't seem to be working. What's the problem? I have a Mac Mini.
If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.
Maybe you are looking for
-
Performance issues with version enable partitioned tables?
Hi all, Are there any known performance issues with version enable partitioned tables? Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge
-
One library, Multiple Windows Accounts. Help Please!
I have two windows user accounts on one computer. Each user has a separate ipod. I want to keep all music files in one place if possible. Currently all music is in iTunes music folder located in shared files. Each user has their own iTunes folder, iT
-
Can't print from windows to shared Canon MX340
I have a new Canon MX340 on my iMac with Snow Leopard. I'm able to print from this iMac and via sharing, all of the other Macs at home. What I can't do is print from my son's Windows XP netbook. Previously, I was sharing an old HP office jet with no
-
New Mac Mini+Superdrive+windows 7 - Will it work?
Looking at updating my father to the Apple world, thought I would get him a Mac Mini, and use Bootcamp to install Windows. As the new Mac Mini doesn't have an optical drive (I have a MacBook Air Superdrive), if I use the external one to install Wind
-
Multiple Problems with PDF InDesign, Bridge, and Acrobat Reader
I create proof books with a blend of Adobe Bridge & InDesign. Here is my work flow: I will BOLD the errors I am having and need help with. Step 1.) I create contact sheets in Bridge and save them as PDF's Problem with Bridge ( I have another posting